How to recover deleted voice recorder recording on phone?
Connect the SD card of the recorder or device where you lost voice recordings to the computer. Run EaseUS Data Recovery Wizard. Locate the location on the device where you lost your voice recordings. Click the “Scan” button to start scanning and searching for lost files.
How to record audio on iPhone?
Open Control Center and hold down the record switch. you will see a button to activate the microphone. 3. When recording the screen, set the volume to maximum and the sound will be recorded through the iPhone microphone.
How to transfer a recording from a voice recorder?
How to transfer recording from a voice recorder if the computer does not have a USB port
- Use a mini plug cable (not supplied).
- Connect the other end of the mini-plug cable to the Microphone jack or In-Line jack on your computer.
How to transfer voice recorder recording from iPhone?
- Connect your iPhone or iPod Touch to your computer and open iTunes.
- Go to the device page. And open the Music section.
- Check the box next to Enable voice recording.
How to copy voice recorder recording from iPhone to computer?
To set up Voice Memos sync, follow these steps:
iPhone 7 or 7 Plus: No Sound on Games or Videos? Fixed!!!
- Connect iPhone to computer and open iTunes app.
- Press the iPhone 1 button in the iTunes menu. This button appears in iTunes when iPhone is connected.
- Go to the Music 2 section and check the boxes “Sync Music” 3 and “Include voice memos” 4.
How to send voice recorder recording from iPhone to WhatsApp?
Do you know the answer to this question? Save the recording from the voice recorder to a file. Then open the “WhatsApp” application, in the dialogue click “Add file”. Specify the path to the file with the recording from the voice recorder, wait for it to download and send to the recipient.
How to find a voice recorder on your phone?
- Open the menu and find “Voice Recorder” in the list.
- Click “Allow” to allow the application to record audio and grant other rights (access to files, phone calls).
- Open “Recording Settings”.
- Hi-Q MP3 Voice Recorder.
How to turn on voice recorder on iPhone 7?
Check your sound settings
It is possible that problems with the ringtone arose due to incorrect sound settings. Open “Settings”, select “Sounds” and set the appropriate ringtone and notification volume for you. Here you can also enable “Change with buttons”, which will allow you to adjust the volume of the ringtone using the volume button on the left side of the iPhone.
No sound on incoming call on iPhone. headset mode is mistakenly turned on
If you have tried all of the above methods, but none of them helped, then the problem is somewhat more complicated. For example, your iPhone may have remained in headset mode by mistake. This can be easily checked in the Music application or Control Center by clicking on the “Devices” icon.
Try plugging and unplugging headphones several times, gently cleaning the audio / Lightning connector with a toothpick, restarting your iPhone.
To put iPhone in Silent mode, slide the switch to the position where the orange mark is visible.
Change sound and vibration mode
To change your ringtone, sound and vibration mode:.
- On iPhone 7 and later, go to Settings> Sounds, Tactile Cues. On older iPhones, go to Settings> Sounds.
- Then tap the option you want, such as Ringtone or New Mail, and select a new alert.
- If you need to adjust vibration, click “Vibration” and select the desired option from the list.
To create a custom vibration pattern, follow these steps.
- Click Create Vibration.
- Touch the screen, draw a drawing, then click Stop.
- Click Play to test vibration.
- When finished, click Save and give the vibration a name. You can click “Write” to change the custom vibration pattern.
Does your iPhone stop playing audio on incoming calls and text messages? This problem is not always associated with a technical malfunction and you can get rid of it programmatically. How to return the sounds of incoming calls and text messages on the iPhone was described in this instruction.
Note: If your iPhone is stuck in headset mode, follow the tips in this guide.
No sound of incoming call on iPhone. what to do
Go to the menu “Settings” → “General” → “Accessibility”.
Select the AssistiveTouch section.
Flip the AssistiveTouch switch to the active position. A button will appear on the screen that is responsible for working with the function.
Click on the AssistiveTouch button and select “Apparatus” in the window that opens.
Set the sound option to On. sound “, after the” Louder “button, set the volume to maximum.
Make about 30-40 calls on your iPhone.
One of the calls will be to get your iPhone back to full functionality. In the event that this did not happen, apparently, there is a technical problem and, alas, you cannot do without a trip to the service center.
Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us on. Instagram Viber.
If the sound of an incoming call or messages has stopped playing on the iPhone, this does not mean that it is time to run to the service center. There is a chance that you have stumbled upon a rare, but not a single bug. A banal reboot or turning on / off the silent mode switch may not help, which is why try using our instructions.
iPhone needs restart
If the volume switch is in the correct position, but the ringtone still does not sound, your device may need to be rebooted. A hard restart will fix software bugs that could have caused the ringtone to disappear. We talked about how to restart iPhone (4 ways) in this article.
How to turn on the sound of incoming calls on iPhone
The Ring / Silent switch is on the left of the iPhone. It can be used to control the sounds played through the iPhone speaker.
What to do if there is no sound (disappeared) of an incoming call on iPhone
Despite the fact that the iPhone is a very reliable thing, sometimes users are faced with a sudden disappearance of the ringtone when making a call. There is an incoming call, but there is no beep, what should I do? Below we will tell you how you can solve this problem.
How to Fix iPhone Not Ringing for Incoming Call (100% Works)
How to turn on flash on iPhone 7 on calls and SMS notifications
Unlike androids and other phones, the iPhone 7 does not have a dedicated indicator for notifications.
Instead, it features for the deaf or hard of hearing, a feature that uses flash to provide a visible signal for incoming notifications. This is in addition to the usual vibration already provided by the system.
Whether you need flash notifications on call or just want to turn them on, after enabling this feature, all you have to do is leave your phone in sight so that you don’t just hear incoming notifications, you see them.
Your iPhone 7 will blink a flash when alerts for calls, SMS and messages arrive.
When enabled, the LED will blink several times for every call or message on the device, even if it is in silent mode.
This remarkable technology offers an obvious visual cue with a bright blinking light when any alert or notification arrives. a great feature that isn’t very well known, but I’ll show you how to turn it on.
How to set a flash on an IPhone 7 on a call
The use of LED flash for notifications is possible in all modern versions of iOS and iPhone devices. This is how you can customize this feature for your.
Click on the Settings app and then on General / General. Select “Accessibility / Accessibility” in Settings.
Find “Flash for Alerts” and click on that. Now flip the switch to the active green position.
Upon receiving an incoming message, phone call, or alert, the LED flash on your iPhone 7’s camera will blink, showing a visual indicator that notifications or alerts are being received on the device.
Undoubtedly useful not only for those with hearing problems, but also really useful for those of us who constantly keep our phones muted, volume down or just want something more obvious.
This setting is supported by all modern versions of iOS, although it has been around for quite some time and this setting may look slightly different on newer and older models.
Note that once you enable LED alerts, you have another option to enable them when your phone is off. Also, this feature only works when your screen is locked.
Another useful option is the Call Alert feature, which can be found in Settings → Phone → Voice Calls.
Siri will announce the name of the caller to make it easier for you to decide if you want to answer or ignore him.
You can choose to have Siri always announce calls, with headphones and car only, or with headphones only.
How to disable flash on iPhone 7
Keeping iPhone 7 in LED flash mode may negatively impact battery life.
Therefore, you should consider disabling the mode as soon as you are done with the need to use this alert mode during calls and SMS notifications.
Actually, there is nothing to describe, since this is just the reverse process. Press Settings, General, tap Accessibility and scroll down.
There click on the LED flash for alerts. On the next screen, you can disable it by moving the switch to the OFF position (make it white). Also, turn off on the mute option. Have a good day.
The interval parameters are set in order to change the frequency between the creation of a new snapshot. For example, you can set three seconds, so that during automatic shooting, photos were created every three seconds. You can set the interval in the “Camera” application itself by clicking on the clock-shaped icon and selecting the desired time parameter.
How to turn off the sound (click) of the camera shutter
If you take pictures often, the sound of the shutter can become very annoying. Also, this click can give you away when trying to photograph something unnoticed. But there are two ways that you can get rid of this annoying sound.
How to turn flash on and off
The flash has three modes: automatic, manual and one in which it is disabled. The first allows the phone to decide on its own whether to turn on the flash or not. In the second option, the flash will be used in any case, and in the third, vice versa. By clicking on the lightning in the “Camera” application, you can select one of the above-described operating modes.
Live Photos is a technology that allows you to create three-second live photos. A live photo is a combination of a.jpeg file and a.MOV file of 45 frames taken at 15 frames per second. You can activate this mode in the “Camera” application itself by clicking on the Live Off button. If the function is enabled, the button will simply turn into Live.
How to change the resolution and frame rate in the Camera app on iOS
Despite the fact that the names of the new iPhones became known long before the presentation, many did not believe until recently that Apple would decide to use the Pro prefix. In the end, usually all the company’s devices had rather laconic names, but, apparently, after the release of the iPhone XS Max in Cupertino, they hit all the hard and could no longer stop. Apple did not explain its decision directly, but made it clear that a triple camera with advanced features adds professionalism to new products. Then it seemed to many that the company was simply mocked, because how can a professional photographic equipment not be able to change the resolution?
In iOS 13.2, Apple decided to make concessions to users and added separate buttons to the Camera application to change the resolution in which the shooting is taking place, and the frame rate with the ability to choose either 30 or 60 fps. Yes, the ability to customize the video format was available before, however, to carry out the necessary manipulations, it was required to go to the “Settings” application, where most users rarely enter. Therefore, for many, in principle, it was surprising that iOS allows you to make changes to the standard configuration at least in some way.
How to set up your iPhone camera
Apple phones and tablets have always had a great camera to take fantastic pictures. On older models of devices, photos may not be quite clear by modern standards, but the ability to properly configure the camera, enable or disable functions can save the situation and greatly improve the quality of the photo.