How to turn on silent mode on iPhone

IPhone Silent Mode vs. Do Not Disturb Mode Differences

IOS provides two ways to prevent your iPhone from ringing when inappropriate situations. For example, you can turn on silent mode (using the toggle located on the side) or configure the software Do Not Disturb feature. Both methods turn off the sound, but there are significant differences between them, which are not known to everyone.

Do Not Disturb Mode

When Do Not Disturb is activated, the iPhone will remain silent and the screen will remain off for incoming calls and messages. However, you can set up exceptions so you don’t miss an important call.

There are two ways to enable Do Not Disturb mode. The simplest of them is to slide your finger across the screen from bottom to top, calling up the “Control Center”, and click on the crescent-shaped icon.

The crescent icon in the status bar (status bar) will indicate that the Do Not Disturb mode is on:

You can also go to “Settings” → “Do not disturb” and slide the switch opposite “Do not disturb”.

You can choose a specific time when you want the iPhone (iPad) to go into silent mode (for example, at night from 23.00 to 6.00). In addition, the settings allow you to select contacts from whom you can receive calls even when the Do Not Disturb mode is activated. Allow Calls allows you to allow calls from everyone, anyone, selected users, or specific contact groups.

The “Repeated calls” option allows you to receive repeated calls from especially persistent ones, if they were made within three minutes after the first one. Silence mode lets you turn off beeps whenever or when iPhone is locked.

How to properly configure Do Not Disturb mode on iPhone, iPad and Mac, we talked in detail in this article.

Silent mode on iPhone

The easiest way to turn off the sound on your iPhone is to use the toggle switch located above the volume buttons on the left side of the case. Surely many are already instinctively reaching for the switch, going to the cinema, school, church, etc., without even realizing it.

The above method turns off the sound of calls, messages, notifications and even games, however, when an incoming call is made, the iPhone will still vibrate, and when an SMS is received, the screen will light up. You can turn off vibration by going to “Settings” → “Sounds, tactile signals” and moving the switch to the left opposite “Vibration in silent mode”.

Even though vibration will be disabled, the screen will still light up when there is an incoming message.

When is Silent Mode or Do Not Disturb Mode Recommended?

The main difference between the above two modes is the glowing screen when receiving messages and notifications if silent mode is activated. If you are used to carrying your iPhone in your or bag, then there is nothing easier than mute the sound by sliding the switch with one movement of your hand. However, keep in mind that vibration can be just as annoying and eye-catching as a ringtone.

If you always hold the device in your hand, on your lap or on a table, then it is best to use the Do Not Disturb mode so that the glowing screen does not catch your eye and does not cause unnecessary attention.

Decrease the volume level

If the volume mute button does not work for you or you do not want to completely mute the sound on the device, you can lower the volume using the keys on the left side of your smartphone. When the level is lowered, the device screen will display how many bars of sound you have reduced.

If these keys do not work for you either, you can change them through the settings:

Go to your iPhone in “Settings” and go to the “Sounds, tactile signals” section;

Here find the section “Call and Alerts” and set the slider to the level you need. Then just exit the menu and start the camera mode.

Turn on the shutter sound

If you used one of the methods described above to turn off the camera shutter sound, and now you need to activate it, just follow the instructions in reverse order, going into the same settings and tabs. In the case of Microsoft Pix, you can not only go to the settings of this application, but also simply uninstall it.

Music app

Few people know, but the iPhone can be tricked using the “Music” application. Run any melody in it and turn down the volume level to zero, and then go to the “Camera” application and start shooting. When you take photos, you will not hear the click you are used to. But if you turn up the volume, you will hear it.

Muting the camera shutter sound

Unfortunately, there are no special options for turning off the camera shutter sound on iPhones. However, Apple users have found several loopholes for themselves on how to get around this.

All the methods currently in existence are listed here, up to the new products of 2019. Which one to use is up to you. There are both universal methods and not quite convenient ones.

Live Photo Mode

Launch the Camera application and select Live Photo instead of normal mode by clicking on the circle icon at the top of the screen. In this mode, you will be able to take pictures without hearing a click from the camera. The peculiarity of this mode is that you get not just a photo, but a mini video or animation, where an additional 1.5 seconds will be recorded before and after. They can be set as a screensaver on the screen and sent to friends.

Turning the camera shutter sound on or off on iPhone

IPhones have a lot of built-in functions, but developers sometimes forget about small options that, it would seem, should be 100% present in the phone, but alas! Now we are talking about the sound of the camera shutter. We’ve all noticed that there is a click when photographing and creating a picture. In general, this is a normal situation, but sometimes it is necessary to photograph an object or person so as not to create extraneous noise and not disturb others. What to do in this case?

Features of silent operation

Please note that this silent mode on iPhone 6 and later does not affect other sounds. Accordingly, if you set the alarm clock in the “Clock” program, it will still play. The same applies to music playback or special effects in games.

Another feature is that if you make the silent mode on the iPhone as indicated above, when a headset is connected to the smartphone, then the sounds in it will still be heard. That is, the “silent” button only affects the sound reproduction through a regular speaker.

Finally, keep in mind that in silent mode of use, the smartphone will still automatically turn on the screen when a new message arrives or when it is necessary to show a notification. This won’t hurt if the iPhone is in your or bag, but if it’s in sight, this behavior can be distracting.

An easier option is to use the silent mode button on the iPhone. Yes, yes, the developers have installed a separate key for this, which is located on the left side of the smartphone, just above the volume control.

Normally, the switch directs all sounds to the speaker of the device. To turn on silent mode on iPhone, slide it as shown in the figure. If done correctly, an orange background will be visible. In this mode, the device will not sound any notifications or calls. By default, the device will alert the call / notification by vibration.

Vibration setting

If you want to fine tune this mode, you need to refer to the settings. Before the 7th model, for this, you must first go to the “Settings” item, and then open the “Sounds” section. On devices with the seventh iPhone and newer, another sub-item is used, which is called “Sounds, tactile signals”.

At the very beginning, it is indicated when the apparatus should use vibration. If you want it not to hum when activating the Silent function, move the corresponding slider to the left to disable it. An alternative is to change the vibration pattern. You can choose from preset sequences or program your own. In the latter case, use the “Create vibration” sub-item, and then draw the desired signal pattern by touching your finger in the graphic mode.

In the same section, you can get rid of other sound signals. For example, if you need not only to remove ringing / vibration, but also to disable the clicks of the virtual keyboard when typing or the signal that is given when the system is locked or unlocked. In this case, scroll through the settings to the appropriate item and deactivate it.

How to turn on silent mode on iPhone

Apple makes premium smartphones, but sometimes some of the functions are difficult to figure out. from the habit after Android or just at the initial stage of use. For example, how to turn on silent mode on iPhone, as well as how to customize it to suit your needs. Immediately, we note that you can get rid of unnecessary sound in two ways, differing in complexity and capabilities.

Do Not Disturb Mode

As you can see, there are many limitations to using a mechanical switch. Therefore, Apple has provided another way, how to turn on the silent mode on the iPhone. And even without displaying notifications and other distractions, in order to maintain the blockage state to the maximum and not once again distract the owner’s attention. for example, at an important meeting, during class, or while the owner is meditating.

The name of this function was given by the speaker. “Do not disturb” mode. The easiest way to activate it is using the control panel. To do this, make a swipe from the bottom up, from the bottom edge of the display (in the iPhone X, everything was slightly altered, the swipe must be done from the upper right corner).

Next, lightly touch the crescent moon icon to enable / disable. When activated, the icon will be highlighted.

Also, directly from the control panel, you can go to quick settings. To do this, you do not need to touch the icon, but press it with some effort. The system will display a menu with various options. activate for a specific time while you are in the same place or for the period of a scheduled event.

Another way how to set iPhone to silent mode is through settings. A special item is highlighted under it in the menu of the device. It is convenient in that it allows you to more accurately change the parameters of the mode.

For example, you can put the device into a permanently quiet mode. If you need to specify a specific time frame, use the “Scheduled” radio button and then specify the period. It’s so convenient to turn off notifications at night.

Additionally, you can specify a list of contacts, calls from which the phone will allow you to attract your attention. To do this, select the appropriate item and mark “favorites”.

detailed settings can be found in the official Apple help: https://support.Apple.com/ru-us/HT204321.

In addition to turning off alarms more efficiently, the Do Not Disturb mode solves the question of how to turn off the sound on the iPhone if the button does not work. because it is activated independently of the keys.

How to reduce alarm sound on iPhone 11?

Go to the “Settings” “Sounds, tactile signals” menu. In the Ringer & Alerts section, drag the slider left or right to change the volume. As you drag, a beep will sound and you will hear the volume level.

Why can’t I hear the ringtone on iPhone?

Go to the Settings menu and turn on airplane mode, wait five seconds, and then turn it off. Check your Do Not Disturb settings. Go to Settings Do Not Disturb and make sure this feature is turned off. Check for blocked phone numbers.

How to turn on sound on iPhone?

On iPhone 7 and later, go to Settings> Sounds, Tactile Cues. On older iPhones, go to Settings> Sounds. Select the option you want, such as Ringtone or New Mail. Tap the selected alert sound.

How to increase the speaker volume on iPhone?

Go to the Library section, Preferences tab. In the com. Apple. celestial.
The plist document is then edited. There you will see the name of the regions and the value of the sound. For example, it could be 83%. You need to set 100% (number 1).
Reboot your device. After that, the smartphone should give out sound at full strength.

How to turn off silent mode on iPhone without a button?

To make your phone truly quiet, you can turn off vibration in silent mode by going to Settings> Sounds. Locate the “Vibration in mute” switch and turn it to Off.

What to do if the silent button on iPhone doesn’t work?

What to do if iPhone 6 silent button doesn’t work?

Pay attention to the settings of the gadget, which mode is currently on.
Restart the device if the installed application interferes with the switch.
As a last resort, use iOS recovery via iTunes.

How to Exit Headphone Mode in iPhone?

How to turn off headphone mode on iPhone?

Reboot the device (in all incomprehensible cases I do this);
Mechanical damage to the socket or blockage. Inspect and clean with alcohol;
Turn on and off the speakerphone;
Press the volume buttons.

What is iPhone Safe Mode

You May Know iPhone Recovery Mode and iPhone DFU Mode and What is “Safe Mode” on iPhone?

IPhone Safe Mode is one way to run iOS on a jailbroken iPhone. Just like Safe Mode in a computer’s operating system, which helps you remove faulty processes that can cause operating systems to malfunction. IPhone Safe Mode lets you remove any problematic or faulty extension that could crash a jailbroken iPhone.

You will feel familiar with it if you have jailbroken your iPhone. IPhone Safe Mode can help you troubleshoot your iPhone or remove the underlays that are causing such problems. In short, iPhone will boot in safe mode while jailbreak extension crashes iOS.

How to Disable Safe Mode on iPhone XS / XR / X / 8 / SE / 7/6/5

With the above method, you can easily boot iPhone in Safe Mode. But how to disable iPhone in Safe Mode can still be confusing. Sometimes, your iPhone may freeze in Safe Mode. This Part Will Show Some Effective Ways To Exit iPhone Safe Mode.

oneRestart to Exit iPhone Safe Mode.

Reboot. this is the easiest way to turn off iPhone Safe Mode. Click Restart when you receive the Safe Mode pop-up message. This operation will return your iPhone to normal.

How to turn Safe Mode on or off on iPhone

As an iPhone user, you may often hear about some of the main iPhone modes such as DFU Mode, Recovery Mode, and Safe Mode. Do you have a clear idea of them? Do you know what iPhone Safe Mode is?

Disable Safe Mode on iPhone

This post will mainly talk about iPhone Safe Mode.In fact, for one reason or another, you will need to enable or disable Safe Mode on iPhone XS / XR / X / 8 / SE / 7/6/5 / 4. This post will give valuable information about iPhone Safe Mode. Also, you will learn how to turn Safe Mode on and off on iPhone.

3Hard restart to disable iPhone safe mode

Step 1Hold down the Power and Home buttons until the iPhone shuts down completely and restarts.

Step 2Release the buttons and wait for the start screen to appear. Here you can ignore “Slide to Unlock”.

2Restart your computer to disable iPhone Safe Mode

You can hold down the Power and Home buttons at the same time until your iOS device shuts down and restarts.

How to put / boot iPhone into Safe Mode

You can manually put iPhone into Safe Mode when it starts to malfunction. This way, you can easily uninstall the last installed tweak to get your iOS device back to normal. This part will show you boot iPhone in Safe Mode in detail.

Step 1Turn off your iPhone in the usual way.

How to Change an iPhone From Silent Mode to Loud : Tech Yeah!

Step 2Wait a few seconds and then turn on the iPhone.

Step 3When your iPhone lights up, keep pressing the Volume Down button until the Apple logo appears on the screen.

Your iPhone will boot into Safe Mode. You can now uninstall any tweak or theme that is causing your iPhone to malfunction.

How to turn off silent mode on iPhone without a button?

To make your phone truly quiet, you can turn off vibration in silent mode by going to Settings> Sounds. Locate the “Vibration in mute” switch and turn it to Off.

How to mute the camera on iPhone 11?

The easiest way to completely turn off the camera sound on most iPhones is to activate silent mode using the toggle switch on the left side of the device. When the mode is turned on, the display will show an inverted bell icon labeled “Silent Mode On.”.

How to restore sound on iPhone?

Go to the “Settings” “Sounds” (or “Settings” “Sounds, tactile signals”) and drag the “Call and alerts” slider back and forth several times.

How to turn on sound on iPhone?

On iPhone 7 and later, go to Settings> Sounds, Tactile Cues. On older iPhones, go to Settings> Sounds. Select the option you want, such as Ringtone or New Mail. Tap the selected alert sound.

How to change volume buttons on iPhone 6?

IPhone 6 and iPhone 6 Plus Volume Buttons Replacement

Unscrew the Pentalobe screws near the Lightining connector:
Lift the front panel of the device using a suction cup and a sharp-edged plastic tool:
Remove the five screws that secure the front panel of the device:
Remove the protective metal plate:
Disconnect all cables from the front panel of the device and remove it:

How to turn off silent mode on iPhone 7?

The easiest way to turn off the sound on your iPhone is to use the switch located above the volume buttons on the left side of the case.

Change ringtone and vibration mode

On iPhone 7 and later, you can control the ringing and vibration settings from the Settings Sounds & Tones screen. On older iPhones, go to Settings> Sounds.

By default, the volume for ringtones and notifications matches the volume configured for audio playback. To control the ringtone and notification volume separately from other programs, turn off Change with Buttons. If Change with Buttons is disabled, you must manually adjust the volume of ringtones and notifications in the Settings Sounds, Tactile or Settings Sounds menu.

On the same screen, you can choose whether the iPhone should vibrate when you select Ring or Silent. If you turn off both options, the iPhone will not vibrate.

silent mode

The first method includes turning on the silent mode. This option is responsible for turning off calls, replacing them with vibration. The easiest way to turn off the sound of your smartphone is.

It should be noted that in this mode the alarm clock works with normal sound. It’s easy to activate the option, just slide the slider on the side at the top of the case.

If desired, you can adjust the rest of the sound parameters.

In the Settings, you should find the section responsible for sounds, it is called “Sounds”. And set the necessary settings manually, you can change the style of the notification when you receive SMS, incoming calls and notifications on the screen.

How to set silent mode on iPhone

The Ring / Silent switch is on the left of the iPhone. It can be used to control the sounds played through the iPhone speaker.

How to turn on silent mode on iPhone

Do not disturb mode

The second way is to activate Do Not Disturb mode. It allows you to block everything from sounds and vibrations to warning lights. Distractions will be eliminated.

You can enable this mode by swiping across the screen and calling the Control Center. In it, you must press the crescent button. Confirmation of inclusion will be the appearance of the same icon in the upper right corner.

You can also activate it through the Settings menu, section Sounds and tactile signals. It should be noted that this mode can be configured to work in a certain time period.

Change sound and vibration mode

To change your ringtone, sound and vibration mode:.

On iPhone 7 and later, go to Settings> Sounds, Tactile Cues. On older iPhones, go to Settings> Sounds.
Then tap the option you want, such as Ringtone or New Mail, and select a new alert.
If you need to adjust vibration, click “Vibration” and select the desired option from the list.

To create a custom vibration pattern, follow these steps.

Click Create Vibration.
Touch the screen, draw a drawing, then click Stop.
Click Play to test vibration.
When finished, click Save and give the vibration a name. You can click “Write” to change the custom vibration pattern.

To turn off the sound, as well as turn off the vibration in the iPhone (including the flash alert), you can use several options.

Putting iPhone into Ring / Silent Mode

When the iPhone switch is in the Ringer position, ringing tones, notifications, and sounds play through the iPhone speakers.

Setting the toggle to Silent mode does not play ringtones or notifications through the iPhone speakers, but does not muffle other sounds and vibrates.

These settings only affect the performance of the iPhone speaker. If you are using a headset with your iPhone, sounds will play through the headset even in Silent mode.

When is Silent Mode or Do Not Disturb Mode Recommended?

IOS developers offer two modes at once on the iPhone, allowing you to protect the user from unwanted messages and calls.

“Silent mode” and “Do not disturb” are located in different places in the system, they are activated in different ways and differ from each other.

Now we will figure out the advantages of each and choose the one suitable for specific purposes.

Do Not Disturb Mode

When Do Not Disturb is activated, the iPhone will remain silent and the screen will remain off for incoming calls and messages. However, you can set up exceptions so you don’t miss an important call.

The crescent icon in the status bar (status bar) will indicate that the Do Not Disturb mode is on:

You can also go to “Settings”. “Do not disturb” and move the switch opposite to “Do not disturb”.

How to properly configure Do Not Disturb mode on iPhone, iPad and Mac, we talked in detail in this article.

Do not disturb

This mode is activated from the Settings. Do not disturb menu or through the corresponding button in the control panel, which can be called up anywhere in the system by swiping from below.

In this mode, the iPhone will immediately be completely silent and the screen will not light up with incoming calls or messages. Another advantage is the flexible configuration of this mode, which is carried out in the Settings. Do not disturb menu.

You can schedule Do Not Disturb to turn on and off automatically at any time.
You can block notifications always or only when the iPhone screen is locked.
It is possible to allow incoming calls from a specific group of contacts, for example, from Favorites.
A separate option allows you to skip a repeated call from one subscriber if it is made within three minutes.
IOS 11 introduces the ability to automatically turn on mode while driving.

Silent mode on iPhone

The easiest way to turn off the sound on your iPhone is to use the toggle switch located above the volume buttons on the left side of the case. Surely many are already instinctively reaching for the switch, going to the cinema, school, church, etc., without even realizing it.

The above method turns off the sound of calls, messages, notifications and even games, however, when an incoming call is made, the iPhone will still vibrate, and when an SMS is received, the screen will light up. You can turn off vibration by going to Settings. “Sounds, tactile signals” and by moving the switch to the left opposite “Vibration in silent mode”.

Even though vibration will be disabled, the screen will still light up when there is an incoming message.

Silent mode

This mode is activated by a switch on the side of the iPhone. It allows you to quickly mute all sounds on your device. After activation, the sounds of incoming calls, messages, instant messengers and games will be muted.

Remember that after activating silent mode, vibration in iOS remains on, to turn it off, go to Settings. Sounds and turn off the Vibration in silent mode switch.

After that, incoming calls will only be signaled by the turning on screen of the device.

how to make silent mode on iPhone

IMPORTANT! To bookmark the article, press: CTRL D

To ask a question to the DOCTOR, and get a FREE ANSWER, you can fill out a special form on OUR SITE, by this link

Every user of this phone should know how to mute the iPhone. There are times when you need to create silence and exclude all sound stimuli, this is where the silent mode comes in handy, or as it is also called. “Silent mode”, which has long taken root in any mobile phone.

In order to turn on the silent mode of the iPhone, you do not need to dig into the phone’s settings and look for modes, just use the switch located on the left side of the case. At the time of this writing, all iPhone models have such a mode switch and looks about the same.

How to put your iPhone on vibrate, ring, or silent mode

This toggle switch has two positions “Normal” and “Silent”. When the silent mode is on, a red dot or stripe (depending on the model) will be visible on the switch. As soon as you have activated silent mode, the phone stops making sounds, only vibration remains on.

IPhone mute is accompanied by a crossed-out bell pop-up notification on the phone display. After you mute the iPhone, the alarm will still go off and ring in the morning. If you play music or voice recordings in silent mode, they will also sound.

On many iPhones, when you turn on silent mode, the sound of a camera click is turned off when taking a photo, but in some models the shutter still continues to click, why read this. here.

If your phone is in normal mode, you can mute your iPhone for an incoming call by pressing the Volume button or the Power button. Having applied a single press, the phone will continue to dial, but without the ringing ringtone. When you press the Power button again, the phone will drop the incoming call, and the caller will hear short beeps.

IOS provides two ways to prevent your iPhone from ringing when inappropriate situations. For example, you can turn on silent mode (using the toggle located on the side) or configure the software Do Not Disturb feature. Both methods turn off the sound, but there are significant differences between them, which are not known to everyone.

What to choose

It all depends on the scenarios for using the smartphone. If iPhone is always in sight, in hand or on a table, it is convenient to use Do Not Disturb mode. So nothing will distract from an important meeting or conversation, and especially important calls will be received on the device.

In addition, the mode is useful at night to protect the owner from the sound of vibration and a luminous screen.

Silent mode is convenient to turn on if you carry your phone in your or jacket, when vibration or screen light will not create additional inconvenience. You can turn on the mode without even looking at your smartphone, but you cannot configure it at your own discretion, and to activate / deactivate vibration, you will have to constantly look into the system settings.

thank re: Store for useful and interesting information.

Few employers like it when employees’ phones are not in silent mode, believing that calls, especially if they are not related to work, are distracting. Basically, this is as true as the fact that downloading videos to iPhone via iTunes is pretty convenient. Another example: it is not uncommon for a woman to suddenly have a migraine, which can be amplified by extraneous noises. Therefore, it is not surprising that many are trying to turn off their mobile. But if you are expecting an important call, then the easiest way is to switch the device to silent mode, and for this you should know how to turn off the sound on iPhone.

To mute the sound on your smartphone, you must:

Examine the phone to find a switch located on the left side of the case.

There are two positions on the toggle switch, Normal and Silent. Activate Silent Mode so you see a red bar on the switch.

After activating the option, the cellular is only able to emit a vibration signal.

Muting iPhone is accompanied by a crossed-out bell icon on the screen. Deactivating the alarm on your smartphone does not turn off the alarm sound. In silent mode, you can turn on music or voice recordings, they will sound.

Now you are aware of how to activate silent mode on the device, and you realized that it is much easier than throwing word on the iPhone, for example.

If you are looking for an answer to the question of how to mute iPhone in normal mode, then you will find the answer in the instructions below:

When you receive a call on your phone, use the volume toggle button, namely, press the volume down key.

If they call you, but click on Power, and the mobile phone will automatically go into silent mode. Remember, when pressed once, the device simply stops making sounds, when pressed twice, the call of the other subscriber is canceled.

Do not forget that if an important call should come to your number, then periodically look at the screen of your mobile phone. After a working day, you need to turn off the silent mode, because it is possible that this very evening you will be invited to an interesting event where you can relax and have fun.

IPhones, of course, have great speakers, but there are times when you may need to turn on the so-called “Silent Mode”, that is, turn off the sound. This function has long been possessed by almost all mobile (portable) communication devices, from ordinary cell phones to PDAs. And, of course, Apple products are no exception, here this mode is especially well debugged. As a rule, it is used in a work setting, in universities and institutes at lectures, at performances in theaters and in other situations where the rules of etiquette prescribe the observance of silence. Don’t worry about missing an important call. After all, the delicate vibration of the iPhone will certainly notify you about an incoming call, and about an update, and about a letter, and about an SMS.

In order to activate silent mode on a device like the iPhone, you don’t have to make a lot of unnecessary gestures, going through a bunch of settings over and over again. Everything can be done in just a second. On every iPhone model currently in existence, there is a convenient switch on the left side of the case near the display (top). One movement. and the phone will stop making any sounds, reminding of itself only by vibration at the right moments. Vibration alert on iPhone is not loud.

Now we will talk about the positions that such a switch can take and how to quickly understand which mode is on now. And so, in one position, the lever creates a silent mode, and in the other. normal. In the first case, a small red dot or stripe (depending on the phone signal) glows on the switch itself. In addition, notifications are displayed directly on the iPhone display when switching between the two described modes. If you turn on the sounds, then the image of a bell appears, if you turn it off, then the bell still appears, but already crossed out with a rather bold line obliquely.

Note that in silent mode, in any case, the alarm clock works, as well as sound notifications from the calendar: iPhone developers do not want to let their customers oversleep or miss an important meeting, event, event. In addition, you yourself can listen to the track, view the video, and so on even with the sound turned off. But in applications, music and sound will generally not work until you turn your gadget out of silent mode.

By the way, even in normal mode, you can easily nullify the ring volume for incoming calls. Firstly, this can be achieved simply by opening the volume control menu, and then moving the pointer to the bottom. zero. position. Secondly, you can use a special volume debug button or a corny multifunctional Power button, one short press of which immediately extinguishes the call melody, while it does not reset itself. you can still pick up the phone. But the second same press will interrupt the call completely.

Sources:

http://mobimozg.com/ios/nastrojki/zvuk-zaTVora-kamery-na-iphone.html
http://virtualniy-mir.ru/kak-vklyuchit-bezzvuchnyj-rezhim-na-iphone/
http://cross-online.ru/kak-vklyuchit-besshumnyy-rezhim-na-ayfone/
http://www.apeaksoft.com/ru/ios-settings/how-to-turn-off-on-safe-mode-on-iphone.html
http://cross-online.ru/kak-otklyuchit-bezzvuchnyy-rezhim-na-ayfone/
http://car3g.ru/info/kak-postavit-rezhim-bez-zvuka-na-ajfone/
http://kaketodelaetsya.ru/kak-sdelat-bezzvuchnyj-rezhim-na-ajfone