Table of Contents

How to get iPhone 8 or iPhone 8 Plus into recovery mode and DFU

Apple has changed the way to force restart on iPhone 8 and iPhone 8 Plus. Accordingly, the method of putting devices into recovery mode has also changed.

Apple had to change the method because holding down the side button and one of the volume buttons now activates Emergency Mode.

If you can’t update or restore your iPhone 8 or iPhone 8 Plus, then you’ll have to put it into recovery mode.

Please note that after recovery you will lose all your data, so only perform it when absolutely necessary. But, if you previously created a backup copy of the device via iTunes or iCloud, you can restore data from it.

How to put iPhone 8 or iPhone 8 Plus into recovery mode

Install the latest version of iTunes on your PC or Mac.

If iTunes is open, close it. Connect your iPhone to your computer and open iTunes.

Force restart your iPhone 8 or iPhone 8 Plus.

Quickly press and release the Volume Up button. Then press and release the Volume Down button.

After that, hold down the Side button until the screen with the iTunes logo appears.

An iTunes window will pop up with the options to Refresh or Restore iPhone. Select Refresh. iTunes will try to reinstall iOS on your iPhone 8 or iPhone 8 Plus without erasing your data. If it takes more than 15 minutes to download, iPhone will exit recovery mode. Don’t panic, let the download end and then repeat the previous steps again.

When the process is over, set up your iPhone 8 or iPhone 8 Plus again.

Note: If you accidentally put your iPhone 8 or iPhone 8 Plus into recovery mode, don’t worry. Just disconnect your iPhone from your computer and restart it using the side button.

Putting iPhone 8 or iPhone 8 Plus into DFU mode

Make sure you have the latest version of iTunes.

Connect your iPhone 8 or iPhone 8 Plus to your computer with a USB to lightning cable.

turn, iphone

Then turn off your iPhone.

Now press and hold the Lock button on the right side of your iPhone for 3 seconds.

At the same time, press and hold the Volume Down button on the left side of your iPhone while continuing to hold the Lock button. Hold both buttons for 10 seconds.

If the Apple logo appears on the screen, then you must start over, because you have been holding the buttons for too long. Otherwise, follow the instructions below.

Then release the lock button, but keep holding the volume down button for another 5 seconds. If the message “Connect to iTunes” appears, then you have been holding for too long. start all over again.

If the screen remains black, it means that you have successfully entered DFU mode.

Congratulations! ITunes should show a message that it has detected your iPhone 8 or iPhone 8 Plus in DFU mode.

How to turn on iPhone if the “On” button does not work

If you hold the power button long enough, but the phone does not respond, then the problem is most likely in the upper loop where the button is located. Then the headphone jack, the volume buttons, and the silent mode switch will have problems.

Perhaps the power button has failed, leveling with the body. You need to check: maybe the fasteners are cracked or the screws are loose.

In any case, if the button does not work, then the phone must be carried to the service. It is better not to open it yourself.

How to turn on your iPhone and start using it

So, you have become the proud owner of a brand new product from a well-known “apple” company. How do I turn on my iPhone and how do I start using it? IPhones of all generations are turned on as standard. using the Power button located at the top right of the phone. The same button is responsible for locking and unlocking the phone.

But even after turning on, using the iPhone is often impossible. In order for the device to start fully functioning, it must be activated. If you bought a phone from one of the major mobile operators such as MTS or Megafon, then it will most likely already be activated. But if not, then this operation can be done without problems.

Let’s walk you through how to turn on your iPhone and activate your new phone step by step.

We take out our iPhone and PC cable from the box.

Download and install a special iTunes program on your computer.

Insert the SIM card into the phone, turn it on using the Power button, connect the phone to the computer through the cable that was included.

Most often, iTunes starts automatically. If not, run the program manually. She herself will offer to activate the device. We confirm the request.

We leave the iPhone alone and wait for the activation to occur. While there is no activation, the device displays a pending message. While the process is going on, you can get acquainted with the capabilities of the device that do not require communication, for example, with a camera, importing photos, menus, etc.

When activation is over, try calling. If everything is in order, the phone will dial the number. This means that the full functionality of your iPhone is included.

How to turn on iPhone if it is frozen

To do this, you need to use the forced reboot mode: simultaneously press and hold down the “On” buttons (above) and the “Home” button (the only round button under the screen). After that, the phone will turn off. If you turn it back on, it will take longer than usual to reboot, but problems will be automatically corrected.

How to turn on iPhone 4s

For this generation of iPhones, the activation process has been greatly simplified. using a computer has become unnecessary.

How to turn on iPhone without using iTunes.

Insert the SIM card, turn on the phone using the “Power” button.

Choosing a familiar interface language: Russian-Russia

The phone asks if you will allow him to determine the location or not (this will be needed later to use maps, check-ins on. etc.). If these functions are needed, then we allow.

Then the iPhone will ask for a WI-FI connection. In principle, this step is optional. It can be done later, at any time. We still need the Internet to send information to Apple about the successful activation of the device, as well as for the operation of various online services such as iCloud and iTunes Match. For the same purposes, you can successfully use the mobile Internet of the local operator (3G / GPRS).

How To Turn Off iPhone 8/8 Plus. How To Turn On iPhone 8/8 Plus

Now the iPhone will register in the mobile operator’s network, receive the necessary settings for MMS, SMS. If you previously had another iPhone, you will be prompted to restore the previously saved data from a backup. And if the iPhone is new, then you need to select “Set up a new device”. In general, after that the phone can already be used fully. Further steps are in principle optional, but highly desirable.

Again, you need to connect to the Internet and sign in with your Apple ID (this is a personal account for all Apple services). If you don’t have one, then you need to create a new account. it’s free and easy.

READ  Contacts disappeared on iPhone how to recover

An agreement appears that needs to be accepted (it would be nice to read it first), then turn on (or not turn on) the voice assistant.

Whether we agree or not for Apple to run diagnostic reports, click the “Get Started” button. That is, in fact, all.

Do not forget that you can also activate iPhone 4s using iTunes.

How to turn on iPhone 3G

On the main page of the screen you need to click “Settings”. “Basic”. “Net”. In the next window, swipe over the slider. Click the “Enabled” position opposite 3G.

When the 3G protocol is used, the information is loaded faster, but the battery power is also consumed faster.

How to Force Restart iPhone 8?

Given the many shortcomings of the new version of iOS, you can often observe a lot of lags and even situations where the iPhone 8 simply freezes tightly.

I don’t know why, but of all three actions discussed today, the reboot is the one that has changed the most. To be honest, I don’t even know why they did this. Perhaps in order to confuse users less and there will be only such a scheme.

The instruction is not complicated enough and you will have to perform some actions in this order:

  • press and release the Volume Up button;
  • press and release the Volume Down button;
  • press and hold the Lock button (button on the right).

As soon as you have done all these steps, the device will be forcedly rebooted and after a while, you will observe the appearance of an apple and then the very inclusion of the gadget.

How to turn off or restart iPhone 8?

2017 brought quite a lot of changes for devices at Apple. But that can’t be attributed to the arrival of the iPhone 8 and iPhone 8 Plus. The device turned out to be too similar to previous generations.

There are, of course, some differences, and in particular they relate to management. Therefore, today we will talk about shutting down and restarting these devices.

These functions are among the most important and I think it will be interesting for you to know this kind of information, so that you can then be prepared for any situation.

How to turn on / off iPhone 8?

Unlike the device on which attention is fully and completely focused this year, the iPhone 8 is a good and cheaper plan B.

In short, they just took the same seven and added some new chips. The Home button remains the same, so there is simply no sense in completely switching to gestures, as they did in the top ten.

Turning on iPhone 8. If you have used other generations, you probably know that you can turn on the device by pressing the button on the right, it is called the Lock button.

This action remained intact. So we do exactly the same actions and get the desired result.

Shutting down iPhone 8. The advent of iOS 11 made it possible to implement this procedure in two ways:

  • Go to Settings, look for Basic and then just click Turn Off;
  • If in the very top model now you need to use two whole buttons for this action, then in the old fashioned way we hold down the “Sleep / Wake up” button and slide your finger on the desired slider.

In addition, this action can be used as a reboot of the device. Most often, you can use it when it just lags, and does not completely freeze.

How to enable Animoji on iPhone 8 and 8 Plus, 7s, 6s, 5s, and iPad?

The new Animoji is now one of the most popular features of the new iPhone X. The public liked it so much that a lot of people immediately wanted to get the same cool animated faces on their smartphones. And demand, as you know, gives rise to supply. And alternative animoji for other iPhones just could not help but appear.

The app with the funny name MrrMrr is. as they say, easily and unobtrusively embeds Animoji into any iPhone. To be precise, MrrMrr is compatible with iPhone 5s, 6 and 6 Plus, iPhone 6s and 6s Plus, iPhone SE, iPhone 7 and 7 Plus, as well as new smartphones iPhone 8 Plus and 8 (by the way, it is profitable to sell iPhone 7 on swoop). over, if you wish, you can even put MrrMrr on an iPad.

The only essential condition: at least iOS 11 or any of its more recent versions must be installed on a smartphone or tablet. And now in more detail.

So, how to enable Animoji on iPhone 8 and 8 Plus, 7, 7 Plus, 6 (s), 6 (s) Plus, iPhone SE or iPhone 5s

The MrrMrr app is able to track your facial expressions just as well as the original Animoji and the TrueDepth supermega camera of the new iPhone X. over, in the absence of TrueDepth, MrrMrr can do quite well with your regular smartphone camera.

Currently, the MrrMrr gallery has six faces at once, which are copied with the utmost similarity from real iPhone X animoji. Plus, there are also a bunch of no less cool “Masks”, “Effects” and “Filters” with which it is also not boring.

In operation, the program, as expected, is extremely simple. The whole process of mastering Animoji is as follows:

  • download MrrMrr from the App Store (by the way, completely free) and install it on an iPhone or iPad;
  • after the installation is complete, launch the program (you will need to allow its access to the camera and microphone);
  • tap EMOJI on the panel at the bottom of the screen;
  • choose the animoji you like from the list of available ones;
  • we catch the face in the Focus camera and press the video recording button;
  • further. at your discretion: we smile, grimace, have fun
  • then you can tap the social network button and upload the finished video to fb, instagram or send it to someone through the messenger along with your Комментарии и мнения владельцев.

Or you can not send anything anywhere, but first save the video, and then slightly edit it, but with the use of built-in effects and additional masks. On Snapchat, for example

How to turn off iPhone 8 Plus?

Press and hold the side button until the Power Off slider appears. Move the slider and then wait 30 seconds for the device to turn off. To turn the device back on, press and hold the side button until the Apple logo appears.

How to Hard Reset iPhone 11?

If the gadget is not responding or you just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.

How to restart iPhone 8?

  • Press the volume up button and release.
  • Press the volume down button and release.
  • Press and hold the Power (Standby) button until the Apple logo appears on the screen.

How to turn on iPhone 8?

IPhone 8 or later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the side button until the Apple logo appears.

How to turn off iPhone 8 if sensor does not work?

It remains only to figure out how to turn off the iPhone if the sensor does not work. On a regular iPhone, where the touchscreen is not broken, you need to hold down the shutdown button for a couple of seconds. After, pull the slider to the right. done.

How to turn on / off iPhone 8?

Unlike the iPhone X, which caught the mainstream of buyers this fall, the iPhone 8 is a fairly budget-friendly fallback. In short, the iPhone 8 is a seven with some extra goodies. There is still a Home key in the figure eight, so there is no need to use only gestures, as it is done in X.

Turning on iPhone 8. If you have had any model of iPhone before, then of course you know that turning on the device is enough to press the Power button on the right, it is also called the Lock button. This algorithm was left the same, so to get the desired result, it is enough to do everything the same as before.

Shutting Down iPhone 8. With the release of iOS 11, you can shut down your iPhone in two different ways:

Go to Settings, then open the General section and find the Turn off button at the very end. Then just click on it.

If in model X the shutdown process is implemented using two buttons, then in the eight everything is implemented as before. Press the Power button and then slide your fingers to the right of the slider.

In addition, this action can be used as a reboot of the device. Most often, you can use it when it just starts to slow down or lag, but has not yet completely frozen.

How to Force Restart iPhone 8?

Taking into account all the bugs in iOS 11, it is very common for the iPhone to freeze.

I don’t know what the Apple engineers came up with, but the reboot process in the iPhone 8 was almost completely changed. Perhaps this is due to the fact that this is how the iPhone X reboots and in future models everything will happen the same.

READ  How to clean apps on iPhone

There is nothing complicated in this process, and in order to restart the iPhone 8, it is enough to follow a series of simple steps:

  • Press and release the Volume Up button
  • Press and release the Volume Down button
  • Press and hold the Power button

As soon as you have done all these steps, the device will be forcedly rebooted and after a while, you will observe the appearance of an apple and then the device itself turns on.

That’s all for me. With the advent of new devices like the iPhone 8 and iPhone 8 Plus, we all have to get used to new keyboard shortcuts. I think they will be used in future models.

Modern phones are more or less stable, but even the iPhone is not immune to freezing. If the iPhone is frozen tight (does not respond to touches and presses at all), then you have to do a forced hard reboot. The iPhone X, 8 and 8 Plus also have a certain key combination that allows you to restore the operation of a frozen phone.

In order to forcibly restart a frozen iPhone, you need to know the model of your device, if you don’t understand, then we read. determine the iPhone model.

For iPhones, there is no single combination of restart keys, so you need to know the exact model in order to apply the correct method of forced restart for your model:

  • Starting with the first model, up to the iPhone 6s Plus, a forced reboot is performed. like this.
  • You can reboot iPhone 7 and 7 Plus. in this way.
  • How to restart iPhone 8 plus

    In 2017, Apple released several redesigned devices, such as the iPad Pro or iPhone X. But unfortunately, all these changes practically did not affect the released iPhone 8. The smartphone turned out to be very similar to its predecessor.

    Of course, it was impossible to do without certain innovations, and in particular this concerns management. Therefore, in this article I want to talk about how to turn off or restart the iPhone 8.

    These functions, in my opinion, are among the most important and I think it will be interesting for you to know this kind of information so that you can be ready for any situation later.

    If iPhone X, 8, or 8 Plus is frozen

    Starting with the iPhone 8, for a forced restart, not a combination of buttons pressed together, but a certain sequential press was applied:

    How to restart iPhone X or iPhone 8

    Therefore, to hard reset iPhone X, iPhone 8, and iPhone 8 Plus, follow these steps:

    • Press and release the volume up button
    • Press and release the volume down button (-)
    • Press and hold the Power button (power and lock key). Don’t let go until iPhone 8, 8 Plus, or X reboots

    You need to hold the last button until an apple appears on the display. As a result of such manipulation, your iPhone should forcibly reboot and restore its previous work. The volume up and down buttons are pressed quite usually, without any holding or holding any pauses. I think you will succeed!

    If after rebooting, instead of the working screen, the iPhone displays the cable and the iTunes logo on the display, then try to do it. like this, or as it is written. here. If these two methods did not help, then perhaps in your case there is a serious failure, which can only be treated by restoring the iOS firmware in iTunes, which will lead to the loss of data in the phone. So don’t forget to make backups periodically.

  • If the iPhone freezes, slows down, but works, then instead of a forced restart, you can try. Reset RAM. The procedure clears the RAM and the phone works a little faster.
  • For whom other key combinations are interesting, see. Screenshot in iPhone X.
  • If you want to erase all information from iPhone, then use. Hard reset.
  • Many users who do not know about changing the reboot method use the old-fashioned way to clamp Home Power on their iPhone 8, but the phone will not reboot. IPhone X (aka 10) users are in confusion looking for the Home button, or trying various unsuccessful holds to reboot.

    The way to restart iPhone 7 seems to be more convenient than in 8-ke. I don’t know yet why we changed the restart key combination, perhaps we will find the answer in the following iPhone models.

    Even the new iPhone 8 is not immune to freezing, and then there is only one way left. to reboot.

    It may even turn out that just holding down the power button won‘t work, but there is a very tricky new key combination that should work anyway.

    Apple changes keyboard shortcuts to force restart Phone 8 and iPhone 8 Plus.

    Step 1: Press and quickly release the volume up button. Then you need to press and quickly release the volume down button.

    Step 2: After that, you need to press and hold the power (power) button until you see the Apple logo.

    Step 3: Wait until the iPhone boots up completely and displays the lock screen.

    That’s all you need to know to reset your iPhone 8 or iPhone 8 Plus.

    On iPhone 6 and earlier, press and hold the Power (Power) button and Home key at the same time.

    On iPhone 7 or iPhone 7 Plus, you need to hold down the Power and Volume Down key at the same time.

    How to unlock iPhone 8/8 Plus if you forgot your password step by step

    It is sometimes very possible to forget your iPhone’s passcode and then you need a way to bypass passcode lock. so you can reset your iPhone password. There are several methods you can use to reset your password, including performing a hard factory reset, which will delete all of your files on your iPhone 8/8 Plus. But there are other ways you can use to delete your files. You can follow the guide below to learn three effective ways to reset your lock password when you forget your password.

    How to Reset Password on iPhone Using iTunes

    If you have already synced iPhone via iTunes, you can restore it including passcode from iTunes. In this case, the data on the device and its password will be erased.

    You need to connect iPhone 8 plus to your computer

    Launch iTunes and enter the password, if you like, you can use another computer that you synced with your iPhone.

    Wait a few minutes for your iPhone to sync with iTunes and then back up.

    When the sync process is complete and the backup is complete, select “Restore [your device]”.

    Once the setup screen appears on your iPhone, click “Restore” from iTunes backup.

    Click on your iPhone in iTunes. Review the date and size of each backup and choose the one that suits you best.

    If you’ve never backed up on your iPhone before, or set up Find My iPhone in iCloud, once your screen locks you, that’s not possible. To reset your iPhone’s password, you will need to use recovery mode. Connect your iOS 11 device to your computer and open iTunes and force restart select “Restore”.

    How to Reset Passcode on iPhone 8 if Forgot Passcode?

    Bypass iPhone Passcode via iCloud

    Alternatively, if your iPhone is connected to your iCloud or Find iPhone, you can also use the iCloud method.

    On another device or computer, go to iCloud.com/find and sign in with your Apple ID.

    Enter your Apple ID to sign in when prompted.

    You can now click on “All Devices” located at the top of your browser.

    Click remove device. This will delete your iPhone and forgotten password.

    After that, you can now restore from a backup device or set up as new.

    It is imperative to note that you will need to connect your iPhone to Wi-Fi or a cellular network in order to use the Find My iPhone service.

    Reset iPhone Lock Password via Tenorshare 4uKey Tool

    If your iPhone is not connected to any of the services mentioned above, this article also provides one of the easiest and fastest ways to fix your problem. Tenorshare 4uKey. is an iPhone unlocking tool that allows you to unlock your iPhone without a passcode. The software is also available in Russian.

    Download and install the program on your PC / Mac before we start.

    Run the program and connect iPhone to computer via USB cable.

    After the tool recognizes your device, you can press “Start” to remove the iPhone passcode.

    Before unlocking iPhone passcode, download the latest iOS firmware over the Internet.

    When the software is downloaded to your computer, you can click “Start Unlock” to start restoring iPhone without passcode.

    The whole process takes a few minutes. Please keep your device connected to the system recovery process.

    When the iPhone passcode is removed successfully, you can set your iPhone as new, including passcode, touch ID.

    Setting up iPhone 8: 3) How to set up a new iPhone

    Turn on your new iPhone 8 or 8 Plus by pressing and holding (only a second or two) the oblong On / Off button in the upper right corner of the device. When the device is turned on, swipe your finger across the screen that says “Slide to set up”. Apple will now walk you through several parameters. First, you will need to select your language, country or region, connect to Wi-Fi, turn on location services. Then get the option to restore from iCloud Backup, Restore from iTunes Backup, or set up as a new iPhone. Since you have a backup, select the appropriate option (we’ll discuss setting up as a new iPhone below). How much has the iPhone 8’s capacity increased??

    READ  How to turn off ivie subscription on iPhone

    Setting up iPhone 8: 6) Users switching to a new iPhone

    If you’re switching from an Android, BlackBerry, or Windows smartphone to an Apple iPhone, it should be relatively painless. You can make it easier to transfer your data to a new device if you set up the right methods correctly. Make sure everything is set up correctly to begin with and there will be minimal problem later. Comparison of iPhone 8 and Samsung Galaxy S8 which is better?

    IPhone 8 Setting: 11) How to Import Contacts from a Really Old Phone

    If your phone has a nano SIM card installed, you can transfer contacts. Copy all your nano-SIM contacts to your old phone. Then, after you’ve set up your new iPhone, you can copy those contacts by replacing your iPhone’s SIM card with your old nano-SIM by going to Settings Mail, Contacts, Calendars Import SIM contacts. Once the import is complete, remove your old SIM and put the one you want. If your phone has a SIM card that doesn’t fit the iPhone 5, but comes with a USB cable to connect to your computer. You can transfer your contacts (and your photos) by exporting them through the software. Will iOS 11 support iPhone 5s, 5c, 5?

    turn, iphone

    Setting up iPhone 8

    How to activate your iPhone if you’re new to Apple

    Disconnect your iPhone and turn it on by pressing the On / Off switch. A welcome screen greets you with a Customization Slide that rotates between different languages. How to turn on iPhone 8 correctly on first activation?

    Setting up iPhone 8

    After you start the activation process, you will be asked to select your language and country. You can enable location services if you want. This allows Apple apps (and third-party apps) to access your location via Wi-Fi networks and GPS (Global Positioning System) location. Then your iPhone checks for Wi-Fi networks in the area your phone can connect to; If not, or if you prefer to use your cellular service, just click the Next button. How much has the iPhone 8’s capacity increased??

    Here you can set up your device like a brand new phone.

    Setting up iPhone 8: 2) Make sure you back up your old iPhone first

    If you are upgrading from an older iPhone, you can transfer all of your apps, data, and settings to your new iPhone. But for that, you need to make a backup (via iTunes or via iCloud) of your information. details, iPhone 5s, 6s, 7s, 8s backup, how to create a copy to iCloud and iTunes.

    How to Back Up iPhone with iTunes

    It is worth checking that you are using the latest version of iTunes before starting. Select “iTunes” from the menu and “Check for Updates”. To back up or update your existing iTunes, connect your old device to the computer you would normally sync using USB, open iTunes, select your device, and click the Sync button.

    Setting up iPhone 8

    New generation of processors

    The A11 Bionic is the most powerful and smartest smartphone processor to date. Some cores work for performance, some for energy efficiency. What it gives:

    • In multitasking mode, the gadget works 3-4 times faster than previous models.
    • Optimization of games and augmented reality applications.
    • Even with intensive use, energy consumption is minimal.

    The main feature of the A11 Bionic is the processor’s learnability. He does not easily pass a signal through himself, but remembers it, correlates it with others and develops a work strategy. If this continues, the emergence of artificial intelligence will only be a matter of time.

    Wireless LAN technology is present today in almost any device that has a chip. It is possible to develop here only in the direction of increasing speed and expanding the scope of use.

    Wi-Fi iPhone 8 features 802.11ac with MIMO technology for increased signal throughput. On iPhone 8 and 8 Plus, Wi-Fi does the following:

    • for data transmission;
    • to connect to the Internet;
    • to determine the geolocation;
    • for video communication.

    In previous Apple models, frequent complaints from owners are related to the non-working Wi-Fi: it is impossible to connect to the network, the password is not accepted, the Internet is slow. The problem is solved by updating to the latest software version. Back in iOS 11, the vulnerability problems of the Wi-Fi chip on iPhones were solved, and in iOS 12 even more so.

    Headphone jack

    Everyone is already a little used to the fact that iPhones now offer headphones exclusively with a Lightning connector. Although at first this decision by Apple annoyed users. Despite the universal hype, the reasons for the changes in the format of listening to music are serious.

    Whereas with a 3.5 mm jack, the sound quality depended on the device and the means of listening, now the functions of a digital-to-analog converter are embedded in the headphones themselves. Accessory manufacturers have the opportunity to create a product with their own settings. True, the cost of a decent product will be appropriate.

    Charging in a new way

    Back in the 90s and 00s, wireless charging was only in the arsenal of superheroes and heroes of science fiction films. And today, every year, the range of smartphones that support charging by means of inductive energy transfer is expanding. The iPhone 8 and 8 Plus are the first in Apple’s lineup to receive this technology. Advantage of wireless charging:

    • fast replenishment of energy volume, 100% battery in 30-40 minutes;
    • lack of wires;
    • remote charging.

    iPhone 8 wont turn on. the fix

    IPhones 8 and 8 plus are currently only equipped with a conventional charger. The company will start producing its own docking stations in September. October 2018. While the user is encouraged to purchase devices from other manufacturers. Fortunately, iPhones support the Qi transfer protocol, on the basis of which all such devices work.

    Weight and size

    The iPhone 8 and 8 have barely noticeable changes in size and weight, but for a complete analysis, even such trifles are important:

    • IPhone 8 weighs 148 g, which is 10 g more than the predecessor model, 8 “fatter” by 8 g.
    • IPhone 8 lengthened by 1mm, thickness by 2mm.

    Changes in weight and dimensions have occurred due to the appearance of the wireless charging function, as well as due to the change in the material of the back panel. Instead of aluminum, the lid is now made of tempered glass.

    Updated design?

    Every year, Apple gadget lovers expect something revolutionary, and every year they are disappointed. Yes, there are few external changes in the iPhone 8 and 8 Plus:

    • The back cover is now made of tempered glass.
    • The company logo on the back has been slightly displaced.
    • Three body colors are presented: “Gold”, “Silver”, “Gray space”. A limited edition of the red series of smartphones came out.

    If Apple did not make major changes to the appearance of the next model, then it was necessary to achieve a different goal than a couple of “Wow!” from users. The design of the iPhone 8 is a legacy of the style of the last ten years of the company’s work, the model became a transitional moment between the old and new generation of smartphones. The role of the flagship was assigned to the iPhone X, and the G8 was a pleasant surprise for fans of the familiar design. The latest engineering advances are embodied in the iPhone 7 body.

    Memory

    iPhone 8 received 2 GB of RAM, 8 respectively 3 GB. The digital storage of iPhone 8 is unchanged from the previous model, but the performance and other features of the smartphone have improved. The reasons:

    • A neural-brain processor that analyzes, learns, searches for optimal data use cases.
    • 6 cores distribute and simultaneously solve many problems.
    • IOS 12 is faster to process and respond to requests.

    Traditionally, the capacity of the iPhone 8 and 8 plus is 65 GB or 256 GB, depending on the configuration and price. Practice has shown that 2 GB of RAM and 65 GB of memory are enough to load “heavy” games and complex programs with augmented reality function.

    Water tightness

    Like the “seven”, the iPhone 8 received an IP67 degree according to the standard that determines the resistance of a smartphone to the ingress of solid objects and water. The model is protected from dust to the maximum, as indicated by the number 6. But with water resistance everything is not so simple. A value of 7 indicates the following:

    • the device can be in water for 30 minutes without damaging the electronics;
    • immersion depth 1.5 m.

    As a result, the iPhone 8 cannot be called waterproof, only devices with indicators of 8 and 9 points are called so. Apple’s smartphone is rather moisture resistant, withstands short exposure to water and moisture. over, liquids with a different consistency are doubly destructive. If you get sweet coffee, soda tea, you need to immediately clean the surface.

    BYRGPUB.COM 2021