Table of Contents

iPhone 7 won’t turn on

turn, iphone

There is no reason to panic if your iPhone 7 does not turn on the screen and does not respond to button presses when trying to start.

It should be borne in mind that the procedure for turning on the 7th iPhone and model 7 is slightly different due to the presence of a more recent version of the touch button “Home”. You need to press and hold down both the power button and the volume down key on the left side for about twenty seconds, after which you should see the Apple logo. Also, if the program freezes, pressing the button can be just as useless. As in the case described above, you can solve the problem by restarting the gadget.

What to do without contacting the service center masters?

If the iPhone 7 stops turning on and giving a reaction to your actions, you can first try to cope with the problem on your own, without involving qualified service personnel. To this end, you need:

  • make sure the battery is charged and also check if its charger is functioning. This recommendation, of course, is elementary, however, broken gadgets are often brought to workshops, whose only malfunction is a dead battery.,
  • carefully inspect the connector for the charging adapter, and if it is dirty, carefully clean it,
  • apply DFU mode in order to restore the factory hardware settings. There is a possibility that the iPhone 7 stopped turning on due to minor glitches in the work of programs.

If none of the above recommendations helps, you cannot do without the help of an experienced specialist. It is impossible to cope with the reasons for this behavior of the iPhone 7 at home, because for this you need to have special knowledge, diagnostic equipment, and a tool. Older models may also not turn on and glitch, for example, what to do if the iPhone 5s does not turn on?

Why iPhone 7 May Not Turn On After Update or Restore Procedure?

The question of why a smartphone sometimes turns off in case of an attempt to install new software on it worries many users of the “seventh” iPhones. With such a procedure, the gadget may turn off spontaneously and it will be impossible to revive it in the usual way. There are usually two possible reasons for this behavior.

The first is the failure of the GSM module, or rather, its Nor Flash microcircuit, which is responsible for configuring the device’s services for a SIM card of a cellular operator. In the event that a malfunction of this microcircuit occurs, the gadget turns off, and after that, even if it turns on, it will be almost impossible to make voice calls.

Reasons that cause the situation when the iPhone 7 does not turn on

All of the above is at the disposal of the employees of our professional service center, who every day have to cope with a variety of reasons for the malfunctioning of Apple gadgets.

The most common falls are the iPhone 7, which can lead to mechanical damage to the basic components, in some cases, the penetration of water inside the case.

Such negative impacts can lead to the following breakdowns:

  • breaking the loops, due to which the gadget may either not turn on at all, or turn off during operation, reboot for no apparent reason,
  • short circuit or oxidation of contacts due to wet exposure,
  • PCB breakage.

Other models of technology from Apple may periodically have problems: Why the iPhone 6 does not turn on

The situation when the iPhone 7 turned off and does not turn on

It may also be caused by the following problems with the power system:

the battery is worn out. It needs to be replaced at the service center, since this requires partially disassembling the device,

  • the charger for the gadget broke,
  • there was a break in the loop that connects the charging connector to the motherboard,
  • the charging controller is broken.

If the user wants to try to restore the operating system to and is not afraid of the loss of the data on the phone, you can try to do it. This will help turn on the iPhone 7 that is suddenly shutting down. To do this, you need a fresh version of the iTunes app. In addition, you should download the current version of the firmware in advance. You can always find software on the Internet.

iPhone turns on before logo

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

The most common reasons that the iPhone does not turn on. the apple burns and goes out, are mechanical damage and software malfunctions. After strong drops or moisture gets inside the smartphone, the display may stop working, due to which the touchscreen partially or completely stops responding. The apple often lights up, but the iPhone does not turn on, because there are problems with the hardware stuffing of the equipment.

For any problem, solutions can be found to quickly eliminate the cause of the problem. Breakdowns that are not related to damage or wear of internal elements are easily diagnosed and repaired on their own. In other cases, it is advisable to seek help from qualified specialists.

Reinstalling the system is a comprehensive solution to the problem

The appearance of a black screen with an apple primarily indicates a software malfunction. Breakdowns of this nature occur:

  • after installing unverified apps
  • after specifying incorrect parameters in the settings

To restore your iPhone yourself, you need to enter it into DFU mode. If all the steps are correct, the iPhone will automatically reinstall the system and then turn on.

To enter recovery mode, you need to do the following:

  • while holding down the button, turn off the smartphone completely (the Apple logo should not light up on the screen)
  • connect the USB cable to the computer and launch iTunes (at this stage, the iPhone itself does not need to be connected to the laptop)
  • simultaneously press the “Home” and “Power” buttons (after 10 seconds, release the button responsible for turning on, “Home” continue to hold down)
  • connect your smartphone to your laptop

After a few seconds, iTunes will detect the device, after which you must release the Home button and proceed to reinstall the system.

This method is also suitable if the phone takes a long time to load, often goes dead or programs hang from time to time. Try to restore the system by flashing, if the smartphone still does not start, then professional diagnostics is required.

Important! When you turn on the iPhone in DFU mode, the device will not start and the backlight will not work. Please note the following:

  • the logo will not light up
  • the screen must be completely black
  • only after the installation of the software is completed, an apple appears on the screen

It is recommended to use original USD cables and certified programs for flashing. Analogues do not always successfully cope with software updates, because iTunes may intermittently fail during device discovery.

What to do if the device does not boot

If you press the buttons, you see a black screen or the Apple logo glows and your device won’t boot, you need to follow the steps to find the cause of the problem. Disassembling an iPhone without professional tools is not worth it, as there is a risk of damaging the power button or power controller.

To independently identify the cause of the malfunction, you need to perform the following actions:

  • inspect the iPhone case and screen for chips, scratches and other damage (most often the iPhone turns on before the apple and turns off after a fall, because the internal elements were damaged)
  • check the battery charge (if the battery is not fully charged, the phone will not start, so you should connect the iPhone to the network and wait 20 minutes)
  • make a complex reboot (the power button and the “Home” button are simultaneously clamped)

When charging, the device may also not respond for a long time to pressing the power button, because the power adapter is faulty. Connect the iPhone to the laptop and, after waiting for a while, try to boot the smartphone again.

  • use non-original accessories (they may give an insufficient number of amperes, which will cause malfunctions)
  • install unverified applications and software
  • charge your phone in case of strong voltage fluctuations

If the iPhone does not turn on after the fall, the apple is on and goes out, and there is damage on the case or screen itself, then mechanical and software diagnostics of the smartphone is required, followed by the replacement of the display module.

The main causes of breakdowns

When the apple is on when turned on, but the system does not start, you can independently perform initial diagnostics and find the cause of the malfunction.

Most often, iPhone won’t boot due to the following factors:

  • malfunction of the “Power” button, power controller, display module and other internal elements (such problems occur when the iPhone is dropped)
  • incomplete battery charge (the device does not turn on further than an apple if there is not enough power)
  • defective USB cable or power adapter
  • corrosion of internal elements after moisture gets inside the phone
  • overheating of the device

It is possible to find a solution to the problem, if the root cause of what the apple lights up and goes out are not hardware problems, you can without outside help.

The “symptoms” of a malfunction can be different, for example:

  • smartphone turns on for a long time
  • after full discharge does not charge
  • when turned on, the logo lights up, but the system freezes and does not start
  • the screen is black, the logo is off
  • at startup, the icon appears, the system boots completely, after which the screen shows the logo and goes out

If the smartphone did not fall, all the buttons worked properly, but the phone for some reason does not turn on even after charging, most likely the battery has worn out. Such a malfunction can be prevented using routine device diagnostics.

How to fix hardware problems

If you have followed all the above steps, but the apple still does not light up when you turn it on, most likely, the smartphone has broken down due to wear of the internal elements, after falling or getting moisture inside the phone. It is not advisable to fix hardware problems on your own, since without knowing the technical features of the iPhone, you can disrupt the operation of the motherboard.

The apple is constantly on, but the device itself does not turn on, with such hardware problems:

  • the “Home” or “Power” button has broken
  • there were problems with the power circuit (during charging, there was a strong voltage surge, which led to the system freezing or a failure in the settings)
  • the battery is worn out (smartphones do not receive enough power, so they do not turn on)
  • there was a failure in the operation of the flash memory (any of the microcircuits can fail, therefore, it is possible to accurately determine the cause of the failure only after computer diagnostics)
  • the charging controller is broken
READ  How to password-protect iPhone notes

Also, when turned on, apples glow on the screens of smartphones, but the system does not boot if the motherboard is damaged. Without routine diagnostics, such a breakdown is difficult to detect in a timely manner, because at the initial stage the devices work, but after a while the phones turn off spontaneously, and apples burn on the screens when they start.

Only experienced craftsmen can accurately and efficiently eliminate such defects. Yudu’s professional qualifications allow you to quickly repair your iPhone and any malfunctions in accordance with the manufacturer’s recommendations.

  • complex mechanical and computer diagnostics
  • repair using original parts
  • home visit at a convenient time

By ordering repairs using the Yudu online platform, you will not waste time traveling to the service center. Experts at your home will determine why the iPhone does not turn on. the apple is on, and will fix the malfunction inexpensively.

Restore iPhone via iTunes

If the iPhone does not turn on even after connecting to the computer, then only recovery will help out.

❗ In most cases, recovery involves deleting all data from the device. You can return them only if you have an up-to-date backup.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

iTunes will report detecting iPhone in recovery mode. In the window that opens, select “Update”. Initially, this option should be selected, as it can allow you to return the device to a working state without losing data.

If data lossless recovery is possible, the iPhone update process will start. Wait for it to end. ❗ Never disconnect your iPhone from your computer.

If the update fails, then a recovery should be performed. Re-enter iPhone into recovery mode (step) and in the iTunes window that opens, select “Recover”. Wait for the end of the operation.

Updating or restoring will bring your iPhone back to working condition.

Perform a hard reboot

The first thing to do if the iPhone won’t turn on is to force it (aka “hard”) restart. It takes the iPhone out of recovery mode, which may have been accidentally turned on, and simply resets software errors on the device.

Force restarting works differently on different iPhone models.

On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (Power button, located on the side or top of the case) at the same time for 15 seconds until the Apple logo appears on the screen.

On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for 15 seconds until the Apple logo appears.

On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for 15 seconds until the Apple logo appears.

Connect iPhone to iTunes in Recovery Mode

If the iPhone does not respond to either charging or hard restarting, the smartphone must be put into recovery mode. Here we immediately note that you may not need to directly restore the iPhone. Everything in order.

The first step is to try to get your iPhone back in working order without restoring it. This method has saved thousands of iPhones without erasing data, which implies recovery. Therefore, we strongly recommend that you initially use it.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

In the iTunes window, click “Eject iPhone”.

Restart your iPhone. To do this, simply hold down the Power button (side button). Alternatively, you can perform a forced reboot using the method described above.

As a result of this operation, your iPhone can turn on and work again as before without the need to restore.

Connect iPhone to charger

Often, the iPhone won’t turn on and show no signs of life due to the fact that its battery is dead. Connect your smartphone to the charger and leave it connected for an hour.

Here are some important tips to keep in mind:

  • Use original or quality charging accessories. There have been cases in which the iPhone turned off due to a dead battery, but did not charge due to using a broken charging adapter or cable. Be sure to make sure the charger and cable are in working order.
  • Charge iPhone with electricity. It is very common for users to charge their iPhone from a computer USB port. But due to the old battery in the smartphone and the low power of the connector, charging simply does not occur.
  • Check if the connector is dirty. Sometimes iPhone won’t start charging due to a heavily soiled Lightning connector. Examine the charging port. If it is really dirty, gently clean it, for example with a toothpick.

⚡ How to understand that the iPhone has started to charge?

If the battery logo with the Lightning cable is on the screen. iPhone does not charge and asks for a connection to the charger. If this logo is displayed after you put the iPhone on charge, then the cable or adapter is out of order. Use other charging accessories.

If only the battery is displayed on the screen, then charging is successful. It is worth worrying only if this logo is displayed without changes for more than 30 minutes. In this case, you should also replace the charging adapter and cable.

? Remember how a forced reboot is performed on your device. It can help with most of these crashes that can happen on the iPhone.

A forced reboot is completely safe. Its execution does not delete any data on the iPhone, so you can perform it without fear.

❗ Methods to restore iPhone in this tutorial are arranged from easy to hard. If a hard reset doesn’t work, go to the next method. He will have to help solve the problem.

Restore via iTunes

If when you try to turn on the phone does not respond or displays an endless boot in the form of the Apple logo, you should use the Recover Mode to recover. To complete this procedure, you will need:

  • defective iPhone 4;
  • cable for connecting to a PC;
  • installed iTunes package.

First you need to install the program and driver for iTunes, and then put your phone into recovery mode. To do this, hold down the Home key. Without releasing the button, connect the PC cable to the charging connector.

At this point, iTunes should detect the connected device and display a corresponding notification that the iPhone is in Recovery mode. Using this mode, you can perform a full reset or install the OS firmware. In our situation, it is necessary to reset the device to factory settings. In the device information window, you can back up your personal data to a PC or iCloud. After that, start the procedure with the “Restore iPhone” button.

To install a new version of the OS, you must first download the firmware files to your computer.

If the breakdown of the iPhone 4 was preceded by mechanical stress, water ingress, overheating, etc., then hardware damage is most likely the cause. Take the phone to a service center for diagnostics, but first try to turn it on using our instructions.

Correct switching on with the key

Not all users know how to properly turn on and off mobile devices. Your iPhone 4 may be completely functional, but you are just doing the wrong startup procedure. To turn on the phone correctly, you need to do the following:

  • If the battery is low, connect your phone to a power source.
  • After a while, hold down the power key on the top panel of the device and hold it for 10-15 seconds.
  • As a result, the Apple logo should appear on the screen, and after 30-40 seconds the operating system will boot.

If this option did not help, then test another one: simultaneously hold down the power and Home keys for 10 seconds. Repeat the action several times. If the phone does not turn on, then the reason should be sought in faulty firmware or hardware failure.

Accumulator charging

The first thing you should do when a problem occurs is to fully charge the battery. The battery may be completely discharged, which is why you cannot start your iPhone. Connect the charger along with the cable to the corresponding connector and look at the screen. After a few seconds, the corresponding indicator will appear on it. Below it is an icon indicating that it is connected to a power source.

However, in this situation, the iPhone 4 user may face the following problems:

  • When you press the power key, the low battery indicator does not appear. In this case, the physical button malfunction can be blamed.
  • When the charging is connected, the corresponding icon does not appear, and the phone screen goes out. There are two options here: a faulty iPhone connector or a cable with a charger block.

How to turn on iPhone 4 if it turned off and won’t turn on

Despite the almost annual release of new iPhone models, many still use old models, up to the 4th generation. Accordingly, due to wear and tear of the device, problems in performance and even normal startup may occur. Today we are going to talk about how to turn on iPhone 4 if it turned off and won’t turn on.

These tips apply to iPhone models with a Home button. You can fix most of the software problems on your own, but if we are talking about a breakdown of hardware, then you cannot do without contacting a service center.

We are concluding the guide to restore iPhone 4 and hope that with the help of these recommendations you can easily identify the problem and turn on your mobile device! If you want to clarify any points from the instructions, then ask for help in the Комментарии и мнения владельцев.

IPhone 4, 5, 6, or 7 won’t turn on. power adapter

A fairly common problem that the iPhone 5s does not turn on is a power failure situation. The user, even when connected, may not see any reaction of the smartphone, but often they do not even suspect about such a banal solution to the problem as charging.

The iPhone owner needs to connect it to a charger, no matter what power source: 220 V, car or computer. Do not be alarmed if there is no immediate reaction. With deep discharge, for example, when the phone freezes, it takes time for the charging indicator to appear. It is worth waiting at least a few minutes, usually this time is sufficient. It is better to put it on charge for 1 hour, and then try to turn it on, do not forget about the previous method, it is still applicable now. Sometimes the process does not start, this can provoke various mechanical problems.

  • Check the cleanliness of the connectors, remove all kinds of foreign objects and dirt with a needle or brush;
  • Make sure that there are no kinks in the wire, probably there are interruptions;
  • Check the tightness of the contacts, perhaps the wire does not enter completely, then you will have to determine the reason for this;
  • We strongly recommend using original chargers. Lightning cables from Chinese manufacturers overheat during operation, may have insufficient power to charge or practically no power;
  • Sometimes the power or charging controller fails, then you will have to use the services of a service center.
READ  How to enable night shooting on iPhone

If the buttons do not work

There is also the following option: the iPhone does not respond to button presses, and the screen of the last application is frozen on the screen. The first thing to do in this situation is to force restart the device. To do this, simultaneously hold down the “Sleep” / “Wake up” and “Home” buttons, and after ten to fifteen seconds you will see that the apple is on the screen again.

It happens that the device still does not turn on. Then you should connect to the charger and leave the iPhone charging for fifty to sixty minutes. You will soon see that the charging screen is on. If this does not happen, check carefully the connector socket, charger and cable. Perhaps the reason is in them. Try the same procedure using a different source of battery power.

If the screen is black

When the iPhone looks at you with a blank, black screen, don’t panic. This does not mean that it is finished. Most likely, the reason is that the battery is completely discharged. The second reason may be a frozen iOS. It is easy to rehabilitate the device. The main thing is to do exactly what we tell you.

If the reason that the battery is discharged is the long stay of the iPhone in the cold, then first you should warm your device in your palms. Then connect the device to the charger for fifteen minutes. If the reason for the non-working iPhone is in a discharged battery, it will soon turn on. If this did not happen, it is possible that the frozen iOS is to blame. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten to twenty seconds. You will soon see an apple on the screen. Release the buttons and after about a minute iOS will launch.

If in this case the long-awaited apple does not burn, we will show you what to do. You need to turn silent mode on / off on iPhone two to three times in a row. Then plug in the charger for fifteen minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing the charger and cable. Perhaps they are the ones responsible for the iPhone not turning on. If, moreover, you are using not the original, but a cheap Chinese fake, this may be the reason.

How to turn on iPhone if it won’t turn on?

It happens that the iPhone charges, but does not turn on, especially often it reaches the logo and freezes at this moment or turns off. In this case, you can apply recovery mode. To use it, you need to have a computer at hand. It is highly desirable that the iPhone has already been connected to it beforehand, and the PC has been added to a trusted source of the connection, but this may not be useful.

  • Connect your smartphone and computer;
  • Launch iTunes;
  • Perform a forced restart of the device. Home (for the 7th version, the volume down button) and Power;
  • A message will appear on the computer screen allowing you to restore the operation of the iOS system, you should click on “Update”.

In this case, an attempt will be made to install the operating system without erasing the files. You may need to completely restore your iPhone to factory settings. Then in iTunes you will have to go to the main tab and click “Restore”.

Ultimately, if iPhone 6, iPhone 7, or any other version still won’t turn on, you need to contact technical support. They will remotely provide instructions on how to fix the problem, if this does not help, then they will direct you to the service center closest to you. This will mean that the problem is of a technical nature and the user is powerless here.

If the smartphone was used with care and charged with original chargers, then most likely it will be possible to restore its operation using the described methods. Otherwise, you will have to give the device to experts.

If you still have questions “What to do if the iPhone does not turn on?”, You can ask them in the Комментарии и мнения владельцев

Today the iPhone is super popular and in demand. Its excellent screen, which gives an incredibly high quality picture, has won over millions of users. Practical design, popular interface, convenient applications will not leave you indifferent to this crown of Apple’s creation. But what to do if even such a perfect device has problems. For example, it just doesn’t turn on. In this case, it is very important to correctly diagnose the cause. Only then act.

First of all, you need to diagnose problems

We will describe the most common causes of problems and tell you what to do.

Why iPhone won’t turn on?

It is not worth thinking about why the iPhone 5 and any other model does not turn on for a long time if it was externally exposed to unwanted influences:

  • Perhaps the smartphone was dropped into the water, even a short immersion or rain can provoke a short circuit and refusal to work. If the phone was really drowned, you should not turn it on right away, on the contrary, turn it off and put it off to dry. After 1 day, try to turn it on, so the probability of restoring its work is higher, otherwise a short circuit will occur at startup and the smartphone will be unusable;
  • Mechanical damage. An iPhone, falling from a height, often takes a hit on the display, and the insides are less likely to suffer. There is no way out except to give the smartphone for repair;
  • Freezing. Batteries are afraid of prolonged exposure to frost, and at one point they lose all their charge due to a chemical reaction. You need to warm it up in your hands, and then try to start it, most likely you will have to charge it.

In these cases, it is possible to eliminate the malfunction only at service centers. There are a number of other reasons that lead to a freeze, some of which can be easily eliminated.

IOS update via iTunes

Sometimes the smartphone turns on, the bull’s-eye is highlighted, but it immediately freezes and does not want to boot. The problem lies in the failure of the operating system. The issue can be resolved by updating iOS.

Iphone 7, 7, 8, 8, x black screen unresponsive, dead, won’t power on, quick and easy.

  • You need to connect your smartphone to your computer via a wire.
  • Then go to the section “About the device”. Create a backup.
  • Download the update file from the official website.
  • Click on the phone icon, find the “Update” button.
  • Select the downloaded file. Open it.
  • Click “Update” again.
  • The automatic installation of the update will start.

Standard loading

A common method that works for all Apple models is to hold down the power button for 3-4 seconds. If everything is fine with the smartphone, it will turn on immediately.

If the charging indicator appears with a red signal, it must be connected to the network. Retry download in 15 minutes.

Water hit

If the phone gets wet, it will not turn on. You can leave it in a warm, dry place for 2 days, then try all methods of switching on using charging, the “Home” and “Power” buttons. Chances are good that it will have to be carried into the hands of the master.

How to turn on a locked iPhone via iTunes

Step-by-step instruction to turn on locked iPhone via iTunes:

  • Connect smartphone to computer via USB.
  • Turn on iTunes.
  • Back up iPhone.
  • Find the “Restore iPhone” button.
  • Restore old phone memory from a copy.
  • New password will be requested during standard boot.

Standard method

This method is suitable for all models, it is considered the most correct. To turn on the iPhone 5, you need to hold down the “Power” button for 3-4 seconds (it is located on the top end). As soon as the Apple logo is displayed on the screen, you can release it.

How to turn on a locked iPhone

In the settings of any iPhone, you can turn on password, fingerprint or Face ID protection. If you enter the password incorrectly several times, the iPhone will be locked. The blocking time depends on the number of attempts, the more there are, the longer it is in the blocked state. On reboot, the user receives an inoperative “brick”.

Such a situation does not always mean that the phone was stolen. Perhaps the password has been forgotten or children have played with it.

It is not a problem to turn on a locked iPhone, it can be done in 3 ways:

  • by the standard method via the power button;
  • in an emergency way through the volume keys and power hold;
  • by connecting a discharged smartphone to the network.

But how do you turn on a locked phone so that you can access it? Consider below.

Ways to solve the problem

What to do if iPhone 7 won’t turn on? There are four options for solving the problem.

Power on problem after operating system update procedure

We decided to update the firmware, but it was unsuccessful. After that, charging does not work, the screen does not light up, the smartphone does not turn on.

Force reboot

The prompt solution to the problem is to restart the smartphone. To do this, hold down the Home and Power buttons with your fingers, then wait 10 seconds. When the specified time has passed, the smartphone logo will appear on the screen. The gadget will turn on, then connect the charger to the socket and wait for the battery to charge.

Mechanical deformation

The first reason is mechanical failure. People charge their smartphone carelessly, use it while charging, which is wrong. Gradually, the connector wears out, the contacts are erased, and it becomes problematic to charge the iPhone. The charging cable is frayed, from such manipulations the gadget also stops working. Sometimes a button on a smartphone fails and the gadget no longer turns on. The reason for such damage is the careless attitude of the owner of the smartphone.

IPhone 7 won’t turn on

If the iPhone 7 does not turn on, and the connection to the charger does not work, do not despair, it will be possible to repair it. Today we’ll tell you what to do if your iPhone won’t turn on.

Apple smartphones are reliable devices, but they also break down periodically. In 90 percent of cases, the fault is the user who treated the gadget carelessly. In other situations, this is a manufacturing defect. Let’s talk about what to do when iPhone 7 won’t turn on.

Recovery using DFU mode

DFU-mode. a special mode of operation of iOS, which is used to update and restore gadgets. If an emergency occurs when the smartphone cannot update, use this method. If your iPhone 7 Plus won’t turn on, you need to do the following:

  • run iTunes on your computer;
  • connect your smartphone to a PC using a proprietary cable;
  • turn off the gadget by pressing the power button;
  • while holding this key, press also the volume down button for 10 seconds;
  • then release the power button, wait 5 seconds.

iTunes will notify you when your smartphone is connected. Now click the “Restore” button in iTunes, wait until the operating system starts.

In case of difficulties, try manually selecting and installing the previously downloaded firmware. To do this, go to iTunes using the above method and select recovery while holding down the Shift key. Now select the firmware file and confirm your choice.

Sometimes the Apple gadget refuses to enter DFU mode. This can be understood by a number of signs:

  • the company logo is lit on the screen;
  • the iTunes icon flashed on the display (the phone is in Recovery Mode, there are no items you were looking for).
  • iTunes does not see the connected smartphone.

If you observe such symptoms, try repeating the procedure for switching to DFU mode. After the restoration is complete, the phone will return to normal state by itself.

Reasons iPhone 7 won’t turn on or charge

A common situation is that an expensive iPhone 7 does not turn on and does not respond to charging. Users in this situation panic, but do not be afraid. It is possible that the iPhone 7 does not turn on and does not respond to charging for simple reasons that the owner can quickly fix.

  • mechanical damage,
  • power failures,
  • difficulties with updating the operating system.

Now a little more about why the iPhone 7 does not turn on.

READ  iPhone se is frozen on apple

Why iPhone won’t turn on?

It is not worth thinking about why the iPhone 5 and any other model does not turn on for a long time if it was externally exposed to unwanted influences:

  • Perhaps the smartphone was dropped into the water, even a short immersion or rain can provoke a short circuit and refusal to work. If the phone was really drowned, you should not turn it on right away, on the contrary, turn it off and put it off to dry. After 1 day, try to turn it on, so the probability of restoring its work is higher, otherwise a short circuit will occur at startup and the smartphone will be unusable;
  • Mechanical damage. An iPhone, falling from a height, often takes a hit on the display, and the insides are less likely to suffer. There is no way out except to give the smartphone for repair;
  • Freezing. Batteries are afraid of prolonged exposure to frost, and at one point they lose all their charge due to a chemical reaction. You need to warm it up in your hands, and then try to start it, most likely you will have to charge it.

In these cases, it is possible to eliminate the malfunction only at service centers. There are a number of other reasons that lead to a freeze, some of which can be easily eliminated.

what to do if your Apple iphone 7 or 7 plus won’t turn on

IPhone 4, 5, 6, or 7 won’t turn on. power adapter

A fairly common problem that the iPhone 5s does not turn on is a power failure situation. The user, even when connected, may not see any reaction of the smartphone, but often they do not even suspect about such a banal solution to the problem as charging.

The iPhone owner needs to connect it to a charger, no matter what power source: 220 V, car or computer. Do not be alarmed if there is no immediate reaction. With deep discharge, for example, when the phone freezes, it takes time for the charging indicator to appear. It is worth waiting at least a few minutes, usually this time is sufficient. It is better to put it on charge for 1 hour, and then try to turn it on, do not forget about the previous method, it is still applicable now. Sometimes the process does not start, this can provoke various mechanical problems.

  • Check the cleanliness of the connectors, remove all kinds of foreign objects and dirt with a needle or brush;
  • Make sure that there are no kinks in the wire, probably there are interruptions;
  • Check the tightness of the contacts, perhaps the wire does not enter completely, then you will have to determine the reason for this;
  • We strongly recommend using original chargers. Lightning cables from Chinese manufacturers overheat during operation, may have insufficient power to charge or practically no power;
  • Sometimes the power or charging controller fails, then you will have to use the services of a service center.

iPhone Shut Down and Won’t Turn On. Force Start

If the iPhone 5s has turned off and does not turn on, you should use the function that forces the smartphone to start. The method is relevant for those cases when the smartphone is frozen at some stage, perhaps only a black screen is shown, but the backlight is working, or after turning it off, the phone stops turning on. In this case, the procedure does not clear the device data, so it should be used initially. For each version of the iPhone, there is the same key combination, only in the latest 7th model it is different:

  • Hold down the Home button and the Power button at the same time. The hold time should be more than 10 seconds, usually up to 20 seconds. Then the Apple logo appears on the screen in the form of an apple. This option works for all versions except iPhone 7;
  • A separate, more familiar approach is used in the new version, you need to hold Power and the volume control, namely the volume down button. Similarly, you need to hold until the action on the screen begins.

The problem can be fixed by this method, but there are several additional methods.

What to do if iPhone won’t turn on?

The iPhone is not an eternal device, although it breaks down a little less often than Android, but still it is not uncommon, then the question arises of what to do if the iPhone does not turn on. Gadgets often break down, freeze and stop responding to user actions. Often the reason is mechanical or external damage to the device, but this is not always the case.

How to turn on iPhone if it won’t turn on?

It happens that the iPhone charges, but does not turn on, especially often it reaches the logo and freezes at this moment or turns off. In this case, you can apply recovery mode. To use it, you need to have a computer at hand. It is highly desirable that the iPhone has already been connected to it beforehand, and the PC has been added to a trusted source of the connection, but this may not be useful.

  • Connect your smartphone and computer;
  • Launch iTunes;
  • Perform a forced restart of the device. Home (for the 7th version, the volume down button) and Power;
  • A message will appear on the computer screen allowing you to restore the operation of the iOS system, you should click on “Update”.

In this case, an attempt will be made to install the operating system without erasing the files. You may need to completely restore your iPhone to factory settings. Then in iTunes you will have to go to the main tab and click “Restore”.

Ultimately, if iPhone 6, iPhone 7, or any other version still won’t turn on, you need to contact technical support. They will remotely provide instructions on how to fix the problem, if this does not help, then they will direct you to the service center closest to you. This will mean that the problem is of a technical nature and the user is powerless here.

If the smartphone was used with care and charged with original chargers, then most likely it will be possible to restore its operation using the described methods. Otherwise, you will have to give the device to experts.

No votes yet! Be the first to rate this post.

What to do if iPhone won’t turn on?

The iPhone is not an eternal device, although it breaks down a little less often than Android, but still it is not uncommon, then the question arises of what to do if the iPhone does not turn on. Gadgets often break down, freeze and stop responding to user actions. Often the reason is mechanical or external damage to the device, but this is not always the case.

Why iPhone won’t turn on?

It is not worth thinking about why the iPhone 5 and any other model does not turn on for a long time if it was externally exposed to unwanted influences:

  • Perhaps the smartphone was dropped into the water, even a short immersion or rain can provoke a short circuit and refusal to work. If the phone was really drowned, you should not turn it on right away, on the contrary, turn it off and put it off to dry. After 1 day, try to turn it on, so the probability of restoring its work is higher, otherwise a short circuit will occur at startup and the smartphone will be unusable;
  • Mechanical damage. An iPhone, falling from a height, often takes a hit on the display, and the insides are less likely to suffer. There is no way out except to give the smartphone for repair;
  • Freezing. Batteries are afraid of prolonged exposure to frost, and at one point they lose all their charge due to a chemical reaction. You need to warm it up in your hands, and then try to start it, most likely you will have to charge it.

In these cases, it is possible to eliminate the malfunction only at service centers. There are a number of other reasons that lead to a freeze, some of which can be easily eliminated.

iPhone Shut Down and Won’t Turn On. Force Start

If the iPhone 5s has turned off and does not turn on, you should use the function that forces the smartphone to start. The method is relevant for those cases when the smartphone is frozen at some stage, perhaps only a black screen is shown, but the backlight is working, or after turning it off, the phone stops turning on. In this case, the procedure does not clear the device data, so it should be used initially. For each version of the iPhone, there is the same key combination, only in the latest 7th model it is different:

  • Hold down the Home button and the Power button at the same time. The hold time should be more than 10 seconds, usually up to 20 seconds. Then the Apple logo appears on the screen in the form of an apple. This option works for all versions except iPhone 7;
  • A separate, more familiar approach is used in the new version, you need to hold Power and the volume control, namely the volume down button. Similarly, you need to hold until the action on the screen begins.

The problem can be fixed by this method, but there are several additional methods.

IPhone 4, 5, 6, or 7 won’t turn on. power adapter

A fairly common problem that the iPhone 5s does not turn on is a power failure situation. The user, even when connected, may not see any reaction of the smartphone, but often they do not even suspect about such a banal solution to the problem as charging.

The iPhone owner needs to connect it to a charger, no matter what power source: 220 V, car or computer. Do not be alarmed if there is no immediate reaction. With deep discharge, for example, when the phone freezes, it takes time for the charging indicator to appear. It is worth waiting at least a few minutes, usually this time is sufficient. It is better to put it on charge for 1 hour, and then try to turn it on, do not forget about the previous method, it is still applicable now. Sometimes the process does not start, this can provoke various mechanical problems.

  • Check the cleanliness of the connectors, remove all kinds of foreign objects and dirt with a needle or brush;
  • Make sure that there are no kinks in the wire, probably there are interruptions;
  • Check the tightness of the contacts, perhaps the wire does not enter completely, then you will have to determine the reason for this;
  • We strongly recommend using original chargers. Lightning cables from Chinese manufacturers overheat during operation, may have insufficient power to charge or practically no power;
  • Sometimes the power or charging controller fails, then you will have to use the services of a service center.

How to turn on iPhone if it won’t turn on?

It happens that the iPhone charges, but does not turn on, especially often it reaches the logo and freezes at this moment or turns off. In this case, you can apply recovery mode. To use it, you need to have a computer at hand. It is highly desirable that the iPhone has already been connected to it beforehand, and the PC has been added to a trusted source of the connection, but this may not be useful.

  • Connect your smartphone and computer;
  • Launch iTunes;
  • Perform a forced restart of the device. Home (for the 7th version, the volume down button) and Power;
  • A message will appear on the computer screen allowing you to restore the operation of the iOS system, you should click on “Update”.

In this case, an attempt will be made to install the operating system without erasing the files. You may need to completely restore your iPhone to factory settings. Then in iTunes you will have to go to the main tab and click “Restore”.

Ultimately, if iPhone 6, iPhone 7, or any other version still won’t turn on, you need to contact technical support. They will remotely provide instructions on how to fix the problem, if this does not help, then they will direct you to the service center closest to you. This will mean that the problem is of a technical nature and the user is powerless here.

If the smartphone was used with care and charged with original chargers, then most likely it will be possible to restore its operation using the described methods. Otherwise, you will have to give the device to experts.

BYRGPUB.COM 2021