Table of Contents

The way for professionals. directly from the motherboard

The next method is suitable for those who, at least at a basic level, understand the PC device. This option is to close contacts, which leads to the activation of Windows.

In order to understand how to open the motherboard, look at the instructions for your laptop.

turn, asus, laptop, button

Usually, it is enough to pry off the protective cover next to the Power button with a flat object; this is done quite easily. Next, you need to close the contacts with a screwdriver.

If fixing the Power button is postponed for some time, you can bring the startup cable out of the laptop case. This will allow you to close the contacts whenever you want, without opening the protective case every time.

Tip: If your laptop is under warranty, do not use this method.

Before using the above methods, make sure that the reason for the lack of Power response is precisely in the start button. The malfunction may be different:

  • If the laptop has a completely discharged battery, then no method will help. The device needs to be charged.
  • Possible problem could be a faulty power supply or cable.
  • Broken or damaged motherboard.

ways in which you can turn on the laptop and sleep mode without the power button

Any, even the best laptop is not immune from the most common problem faced by users. the breakdown of the power key. Of course, if this problem occurs, you should contact the technical service for repair. If there is no such possibility yet or an urgent start of the computer is required, the question arises. how can you turn on the laptop without a working power button? There are several methods to start the laptop in a different way.

Power ON in BIOS

Using the BIOS menu, you can assign a specific key combination to start the laptop. After this procedure, the performance of the main Power becomes not particularly important.

To perform this operation, follow the instructions:

  • Enter BIOS (press the F2 key after starting the laptop).
  • After booting the system, look for the command “Power Management” in the continuation of “Setup” or “Power”, depending on the model.
  • In the menu that opens, select the command “Power on function” (these are the system power settings) or “Power On by PS2 KB / MS”.
  • Next, click “Any Key”, after “Hot Key”. now you can set the desired combination on the keyboard with which you will start Windows.
  • Press F10 to confirm the settings. Enter.

Reboot your laptop. Now, to turn on the system, you just need to click on the selected combination.

Hardware button to launch Boot Menu

Most laptops are equipped with an emergency power button that brings the PC into the Boot Menu. The main models equipped with this function are Lenovo, Sony, Acer, Asus, HP.

To use this option, inspect your computer for a similar button. The main places where it can be located are next to the Power key or to the side of the keyboard. It looks like a small circular depression.

Once the key you want is found, follow these instructions:

  • The hardware button can be hidden deep in the panel, so you cannot activate it by pressing your fingers. To activate, you need to press on it with a sharp object (needle, toothpick, pin).
  • The screen will light up a blue screen, find the “Normal stantup” command and click on it.
  • Confirm the action by pressing the Enter key. Next, the usual Windows boot will begin.

With this simple method, you can turn on your laptop and continue working. However, if your computer is from Dell, DEXP, or Samsung, your search for a hardware button will not be successful. It is not provided on these models.

Sleep mode

You can also just not turn off the laptop, but leave it in “sleep” mode. To install this mode, follow the instructions:

  • Follow the chain: Start. Control Panel. Power supply.
  • On the left, select “Sleep Mode Settings”.
  • Now you need to set the sleep time for mains and battery operation. Opposite the line “Putting the computer into sleep mode” set the desired time.

To get Windows to wake up from sleep, follow these steps:

  • Follow the chain: Start. Control Panel. Device Manager.
  • Click on the “Keyboard” RMB, select “Properties”.
  • Go to the Power Management section.
  • Put consent next to “Allow this device to wake up the computer”.
  • Apply settings.

With new settings, the laptop will go to sleep after a certain amount of time. Pressing any key on the keyboard will help you get the computer out of this mode.

Launching a laptop without a power button

A broken power button on a laptop is a common problem for many users. This situation leads to the inability to start the device. It would be most correct to fix the button, but it is not always possible to do this manually or immediately take it to a service center for repair. You can start the device without this button, but this is done in two simple ways.

Boot Menu

Almost all modern laptop PCs are equipped with a special button that allows you to launch a special menu. Most often it is located somewhere on the side of the case or at the top near the display and is pressed with a finger or a needle. You can turn on the laptop using it as follows:

    Examine the case of the device carefully or look for the description in the manual to find the button you need.

Press it once and wait for the menu to launch. A small blue window should appear on the screen. Navigate through it using the keyboard arrows, select “Normal Startup” and press Enter.

After a while, the operating system will boot successfully. Of course, you can use this button all the time, but it is not always convenient and causes some difficulties. Therefore, it is better to set certain parameters through the BIOS. Read more about them below.

We start the laptop without the power button

We do not recommend disassembling your laptop and trying to fix a button if you have never worked with such equipment before. Failure to do so can damage other components. Better to use the services of a professional or turn on the laptop without a button. Sometimes only the top of the button breaks, while the switch remains intact. To start the device, you just need to press the switch with any convenient object.

Power ON function

It is better to take care of how to turn on the laptop in advance if the start button breaks. In addition, this method will be useful for those who start the system through the Boot Menu. You just need to set certain parameters, and you can turn on the laptop from the keyboard. Follow the instructions:

Go to the Power Management Setup or Power section. Partition names may vary depending on the BIOS manufacturer.

Find the item “Power ON function” and set the value to “Any Key”.

  • Now you can reboot the device, just do not forget to save the settings before exiting.
  • Thanks to the change in this parameter, the laptop can now be started by pressing absolutely any key on the keyboard. After fixing the Power button, you can return the reverse settings in the same way if this configuration does not suit you.

    Today we have analyzed two options, thanks to which the mobile computer is turned on without a corresponding button. Such methods allow you not to disassemble the device for manual repair and do not urgently carry it to a service center for repair.

    In addition to this article, there are 11,998 instructions on the site. Add Lumpics.ru to your bookmarks (CTRLD) and we will definitely be useful to you.

    Thank the author, share the article on social networks.

    How to turn off a phone without a Xiaomi sensor?

    First you need to reboot your device. Since the sensor does not work, use the mechanical on / off button of your Xiaomi smartphone: press and hold it until the screen turns off. It usually takes 5-10 seconds.

    How to Turn Off Phone Without Samsung Power Button?

    As promised, the instruction will be very short, a forced shutdown consists of three simple steps:

    • Connect your Samsung Galaxy to the charger.
    • Press and hold the power button and volume down button.
    • Release the buttons after 8-10 seconds, the smartphone will be turned off.

    How to turn on the phone without Asus power button?

    To wake up a sleeping smartphone without a power button, you can use one of four available methods:

    • Connect your smartphone to the charger.
    • If your smartphone supports the function of activation through the screen, tap twice on the display;
    • Press the mechanical Home button;

    How to turn on Asus Zenfone?

    If the power button on Zenfon does not work, you can try to start the smartphone by connecting the charger to it. In this case, you need to hold down the volume up button to launch the boot menu.

    How to turn on the laptop if it freezes when turned on?

    Laptop freezes: how to restart with ALTF4 keys

    • Press Alt F4 at the same time. You will see a small menu offering several shutdown options: shutdown, reboot, hibernation.
    • Select the desired option and confirm the action with the Enter key.
    READ  Samsung a 10 won't turn on

    How to turn off the phone in settings?

    Go to “Settings” on your Android device. Then go to the “All” section. Then open the subsection “Schedule on / off device”. Schedule your Android device to turn on and off.

    Is it possible to turn on the laptop without the power button?

    To do this: After loading the BIOS, enter the Power Management Setup or “Power” section (different models vary). Click on Power on Function or Power On by PS2 KB / MS. Select Any Key (one key to enable).

    How to turn on the phone if the Samsung power button does not work?

    How to turn on or restart Samsung if the button doesn’t work

    • Even the most expensive smartphone is not immune to breakdowns.
    • We put the smartphone on charge.
    • If the first method does not work, try holding the volume button to the “-” position, the “home” button and, while holding these two buttons pressed, connect the power cable (do not release the buttons all the time!).

    How to turn on the laptop in sleep mode?

    • Make sure the computer device is on. to do this, check the operation of the indicator.
    • If your laptop does not respond to the mouse, touchpad or keyboard, press the Power key for 10-15 seconds and wait for the screen to turn off.
    • Click on Power again.

    How to restart phone without buttons?

    • Look for a hole on the body of the device, next to which there should be an inscription “Reset”.
    • Take a thin object (paper clip, SIM key or sewing needle) and gently press the button recessed into the hole.
    • The phone should restart.

    How to turn on Asus without power button?

    There is another way to turn on your Asus smartphone without a button. To do this, you need to disassemble the gadget and forcibly close two contacts on the lock button using a screwdriver or metal tweezers.

    What to do if your Lenovo phone won’t turn on?

    • Force restart the device Your phone may be turned on, but just frozen.
    • Take out the battery and put it back in. If your phone has a removable battery, remove the cover and slide the battery out of the device.
    • Put your phone on charge
    • Reset the machine to factory settings

    How to turn on the monitor using the keyboard?

    Click the Start button and select Keyboard accessibility options, and then turn on the toggle under Use onscreen keyboard. A keyboard will appear on the screen, which you can use to navigate the screen and enter text.

    What to do if the keyboard stops working on a laptop?

    Turn off your laptop, remove the battery and unplug the power cord. Then press the power button several times, then reconnect all the above components. Try turning the laptop back on. If water gets into the keyboard, the malfunction may be serious.

    Is it possible to turn on the laptop without the power button?

    For some models, the button is hidden and only a thin hole leads to it. Here the item Normal Startup is selected. The operating system then starts up normally. Having a button to enter the boot menu, you can easily turn on the laptop without the power button.

    How can you turn on a laptop without a button

    It is not advised to disassemble the laptop on your own and try to fix a button that does not work, if no work has been done with such devices before. Incorrectly performed actions will lead to breakage of other elements.

    It is best to use the services of specialists or turn on the device without a button. In some cases, only the top is broken, and the switch is in working order. To start the laptop, you will only need to press the base of the button in any available way.

    Boot Menu

    Almost all laptops have a dedicated button that, when pressed, allows you to activate a special menu. As a rule, it is located on some side of the case or on top of the screen and is pressed with a needle or finger. You can turn on the device in this way by observing the following steps:

    • Look closely at the laptop case or look for the description in the user manual to determine the required button.
    • Find a needle or pin if installed in the body itself.
    • Press once and wait for the menu to open. A small blue window should appear on the monitor. Moving around the window with the keyboard arrows, find the “Normal Startup” mode and then press the Enter key.

    After a certain time, the laptop will turn on successfully. Naturally, this button can be used all the time, but it is sometimes inconvenient and causes certain difficulties. Therefore, it is advisable to make certain settings in the BIOS.

    Power ON function

    It is better to first take care of how to turn on the laptop if the start key is broken. In addition, this method is useful for people who start using the Boot Menu. You only need to specify certain settings, and it will be possible to turn on the device from the keyboard.

    • Go to BIOS in any way.
    • Find the “Power” menu. The name may be different depending on the BIOS manufacturer.
    • Find the “Power ON function” submenu and set “Any Key”.
    • Next, you need to restart the laptop, but you must save before exiting.

    By changing these settings, the device can be turned on by pressing absolutely any button on the keyboard.

    How to turn on an Asus laptop without the power button

    Tell me, can I turn on the laptop if the power button does not work? The fact is that I have already changed it 1 time, I used to press it 10 times while the laptop was turned on (the laptop case in the place of the button is damaged, so something always gets under the button).

    The question is, of course, an interesting one. If you can turn off the laptop in different ways, including without physical keys (buttons), then turning it on is more complicated. Much more depends on the model and design of your device.

    In this article I will give several options for solving the problem, so to speak, with minimal “costs”. So.

    Alternative options for how to turn on the laptop

    Specialist. buttons for entering BIOS / UEFI

    Take a good look at your laptop. On some devices (for example, on a number of Lenovo laptop models) there are special buttons for entering the BIOS. In fact, this is an additional (emergency) button for turning on the device, and if the main button does not work for you, then try using it.

    For reference. In general, this button (“with an arrow”, see photo below) is used directly to enter the BIOS (and not an additional emergency to turn on). Press it when the laptop is turned off. After pressing, the device turns on and the start menu appears on the screen with a proposal to enter the BIOS or implement the norms. loading.

    Where to look for it, what it looks like: most often it is located either next to the power input, or next to the power button of the device. As a rule, to click on it, you need to use a pencil (pen).

    Lenovo B70. BIOS entry button next to the power input. It is most convenient to press with a pencil or pen

    Lenovo G700. button to enter device settings (including BIOS)

    After turning on the laptop using this “emergency” button: just select the “Normal Startup” option and continue working as usual. Or, if there is no normal boot option, you need to enter the BIOS and exit without saving. the device should reboot.

    By the way, if you have problems turning on the device, then, as an option, you can not turn it off, but put it into sleep mode. Simply, the laptop can be woken up from sleep mode using any button on the keyboard or mouse. To configure the automatic transfer of the laptop into sleep mode, go to the Windows control panel in the “Power supply” section (see screenshot below).

    Disassembling the laptop and closing the button contacts

    Important! Disassembly of the device may be the reason for the denial of warranty service. In addition, not careful and hasty actions can lead the device to even more expensive repairs than a simple replacement of the power button (therefore, everything you do according to the advice below. do it at your own peril and risk).

    In general, the Power button is designed to close the contacts that give a pulse to turn on the PC / laptop. Relatively speaking, if the button itself does not work, then these contacts can be closed with any conductive object, for example, an ordinary screwdriver.

    By the way, many people probably remember how in popular action movies, to start the car, they break the lock and instead of the key use several wires, closing them together. Everything is the same here.

    That is, the motherboard must have PWRSW connectors: if you disconnect the button from them and close the PWR and Ground contacts for 0.5 ÷ 1 sec the device turns on!

    However, there may be some complications here. There are many designs of laptops, and it is not always so easy to get to the power button. In this article (of course) I cannot give step-by-step instructions for disassembling a laptop (use the specification for the device for this, and disassembly reviews on specialized resources).

    In my example below, I gave a couple of photos of a laptop with a very simple disassembly:

    • to get to the power button, it is enough to pry off the protective cover located next to the keyboard;
    • then under the power button there is a small board with a cable that goes to the mat. board. There are two ways here: you can close the contacts on this small board with a screwdriver, or you can disconnect the cable from the mat. board and close the contacts directly on it.

    Instead of a button, we close the contacts with a screwdriver

    You can short-circuit the contacts on the motherboard

    Alternatively, instead of a button, you can remove the cable from the laptop case. And to turn on the device, you will close the contacts among themselves. In general, there are options here.

    By the way, I want to note that if your laptop does not react to the power button in any way, it is possible that everything is in order with the button itself and the reason lies elsewhere:

    • dead battery;
    • faulty power supply (including damage to the power cable);
    • those. malfunction mat. boards, processor, etc.

    I recommend that you read one of my previous articles on why the laptop may not turn on (it lists the main reasons, and how they can be solved).

    Broken power button is one of the most common problems for laptop users. This fault prevents the device from starting in the usual way. It is best to repair and replace the button, but it is not always possible to do this at home or immediately take the laptop to a repair shop. You can turn on the device bypassing this button, and you can do this in several ways.

    What other ways are there to turn on the laptop without a button

    Some laptops are not equipped with keys to enter a special menu. Turning on the device will not work without it. But the launch can be done from the motherboard through the BIOS. To get to it, you need to disassemble the laptop case.

    Tell me, can I turn on the laptop if the power button does not work? The fact is that I have already changed it 1 time, I used to press it 10 times while the laptop was turned on (the laptop case in the place of the button is damaged, so something always gets under the button).

    The question is, of course, an interesting one. If you can turn off the laptop in different ways, including without physical keys (buttons), then turning it on is more complicated. Much more depends on the model and design of your device.

    READ  How to set up Samsung Ji 6

    How To Turn On Laptop Without Power Button || Turn On Laptop With Phone

    In this article I will give several options for solving the problem, so to speak, with minimal “costs”. So.

    Alternative options for how to turn on the laptop

    Specialist. buttons for entering BIOS / UEFI

    Take a good look at your laptop. On some devices (for example, on a number of Lenovo laptop models) there are special buttons for entering the BIOS. In fact, this is an additional (emergency) button for turning on the device, and if the main button does not work for you, then try using it.

    For reference. In general, this button (“with an arrow”, see photo below) is used directly to enter the BIOS (and not an additional emergency to turn on). Press it when the laptop is turned off. After pressing, the device turns on and the start menu appears on the screen with a proposal to enter the BIOS or implement the norms. loading.

    Where to look for it, what it looks like: most often it is located either next to the power input, or next to the power button of the device. As a rule, to click on it, you need to use a pencil (pen).

    Lenovo B70. BIOS entry button next to the power input. It is most convenient to press with a pencil or pen

    Lenovo G700. button to enter device settings (including BIOS)

    After turning on the laptop using this “emergency” button: just select the “Normal Startup” option and continue working as usual. Or, if there is no normal boot option, you need to enter the BIOS and exit without saving. the device should reboot.

    By the way, if you have problems turning on the device, then, as an option, you can not turn it off, but put it into sleep mode. Simply, the laptop can be woken up from sleep mode using any button on the keyboard or mouse. To configure the automatic transfer of the laptop into sleep mode, go to the Windows control panel in the “Power supply” section (see screenshot below).

    Disassembling the laptop and closing the button contacts

    Important! Disassembly of the device may be the reason for the denial of warranty service. In addition, not careful and hasty actions can lead the device to even more expensive repairs than a simple replacement of the power button (therefore, everything you do according to the advice below. do it at your own peril and risk).

    In general, the Power button is designed to close the contacts that give a pulse to turn on the PC / laptop. Relatively speaking, if the button itself does not work, then these contacts can be closed with any conductive object, for example, an ordinary screwdriver.

    By the way, many people probably remember how in popular action movies, to start the car, they break the lock and instead of the key use several wires, closing them together. Everything is the same here.

    That is, the motherboard must have PWRSW connectors: if you disconnect the button from them and close the PWR and Ground contacts for 0.5 ÷ 1 sec the device turns on!

    However, there may be some complications here. There are many designs of laptops, and it is not always so easy to get to the power button. In this article (of course) I cannot give step-by-step instructions for disassembling a laptop (use the specification for the device for this, and disassembly reviews on specialized resources).

    In my example below, I gave a couple of photos of a laptop with a very simple disassembly:

    • to get to the power button, it is enough to pry off the protective cover located next to the keyboard;
    • then under the power button there is a small board with a cable that goes to the mat. board. There are two ways here: you can close the contacts on this small board with a screwdriver, or you can disconnect the cable from the mat. board and close the contacts directly on it.

    Instead of a button, we close the contacts with a screwdriver

    You can short-circuit the contacts on the motherboard

    Alternatively, instead of a button, you can remove the cable from the laptop case. And to turn on the device, you will close the contacts among themselves. In general, there are options here.

    By the way, I want to note that if your laptop does not react to the power button in any way, it is possible that everything is in order with the button itself and the reason lies elsewhere:

    • dead battery;
    • faulty power supply (including damage to the power cable);
    • those. malfunction mat. boards, processor, etc.

    I recommend that you read one of my previous articles on why the laptop may not turn on (it lists the main reasons, and how they can be solved).

    How to turn on a laptop without a power button, is it possible?

    Tell me, can I turn on the laptop if the power button does not work? The fact is that I have already changed it 1 time, I used to press it 10 times while the laptop was turned on (the laptop case in the place of the button is damaged, so something always gets under the button).

    The question is, of course, an interesting one. If you can turn off the laptop in different ways, including without physical keys (buttons), then turning it on is more complicated. Much more depends on the model and design of your device.

    In this article I will give several options for solving the problem, so to speak, with minimal “costs”. So.

    Alternative options for how to turn on the laptop

    Specialist. buttons for entering BIOS / UEFI

    Take a good look at your laptop. On some devices (for example, on a number of Lenovo laptop models) there are special buttons for entering the BIOS. In fact, this is an additional (emergency) button for turning on the device, and if the main button does not work for you. then try using it.

    For reference. In general, this button (“with an arrow”, see photo below) is used directly to enter the BIOS (and not an additional emergency to turn on). Press it when the laptop is turned off. After pressing, the device turns on and the start menu appears on the screen with a proposal to enter the BIOS or implement the norms. loading.

    Where to look for it, what it looks like: most often it is located either next to the power input, or next to the power button of the device. As a rule, to click on it, you need to use a pencil (pen).

    Lenovo B70. a button to enter the BIOS next to the power input. It is most convenient to press with a pencil or pen

    Lenovo G700. button to enter device settings (including BIOS)

    After turning on the laptop using this “emergency” button: just select the “Normal Startup” option and continue working as usual. Or, if there is no normal boot option, you need to enter the BIOS and exit without saving. the device should reboot.

    By the way, if you have problems turning on the device, then, as an option, you can not turn it off, but put it into sleep mode. Simply, the laptop can be woken up from sleep mode using any button on the keyboard or mouse. To configure the automatic transfer of the laptop into sleep mode, go to the Windows control panel in the “Power supply” section (see screenshot below).

    Disassembling the laptop and closing the button contacts

    Important! Disassembly of the device may be the reason for the denial of warranty service. In addition, not careful and hasty actions can lead the device to even more expensive repairs than a simple replacement of the power button (therefore, everything you do according to the advice below.Do at your own peril and risk).

    In general, the Power button is designed to close the contacts that give a pulse to turn on the PC / laptop. Relatively speaking, if the button itself does not work, then these contacts can be closed with any conductive object, for example, an ordinary screwdriver.

    By the way, many people probably remember how in popular action movies, to start the car, they break the lock and instead of the key use several wires, closing them together. Everything is the same here

    That is, there must be PWRSW connectors on the motherboard: if you disconnect the button from them and close the PWR and Ground contacts for 0.5 ÷ 1 sec, the device will turn on!

    However, there may be some complications here. There are many designs of laptops, and it is not always so easy to get to the power button. In this article (of course) I cannot give step-by-step instructions for disassembling a laptop (use the specification for the device for this, and disassembly reviews on specialized resources).

    In my example below, I gave a couple of photos of a laptop with a very simple disassembly:

    • to get to the power button, it is enough to pry off the protective cover located next to the keyboard;
    • then under the power button there is a small board with a cable that goes to the mat. board. There are two ways here: you can close the contacts on this small board with a screwdriver, or you can disconnect the cable from the mat. board and close the contacts directly on it.

    Instead of a button, we close the contacts with a screwdriver

    You can short-circuit the contacts on the motherboard

    Alternatively, instead of a button, you can remove the cable from the laptop case. And to turn on the device, you will close the contacts among themselves. In general, there are options here.

    By the way, I want to note that if your laptop does not respond in any way to the power button. it is possible that everything is in order with the button itself and the reason lies elsewhere:

    • dead battery;
    • faulty power supply (including damage to the power cable);
    • those. malfunction mat. boards, processor, etc.

    I recommend that you read one of my previous articles on why the laptop may not turn on (it lists the main reasons, and how they can be solved).

    How to make a different power button on a laptop?

    Changing the default settings in the Start menu

    • Open the properties window of the taskbar and start menu.
    • Go to the Start Menu tab.
    • From the Power button action list, select the appropriate option, and then click OK.

    What to do if the laptop power button does not work?

    If the button does not work and you cannot turn on the laptop, first of all you need to make sure that there are no problems with external devices. They may be as follows. The battery is discharged or damaged. Then the power button is pressed while the laptop’s network adapter is on.

    How to turn on the monitor using the keyboard?

    Most keyboards and laptops have function keys. They are easy to find by the “Fn” label. Typically, this button is located on the bottom line next to [Ctrl], [Windows], [Alt] and [Alt GR]. To turn off the monitor, the most commonly used combinations are [Fn] [F6], [Fn] [F4] or [Fn] [F7].

    How to turn off a laptop using the keyboard?

    Laptop freezes: how to restart with ALTF4 keys

    • Press Alt F4 at the same time. You will see a small menu offering several shutdown options: shutdown, reboot, hibernation.
    • Select the desired option and confirm the action with the Enter key.

    How to get out of sleep mode on a laptop?

    Whenever you need to put your computer to sleep, simply press the power button of your desktop, tablet or laptop computer, or close the laptop lid.

    ASUS LAPTOP HOW TO POWER ON IF THE POWER BUTTON IS DEFECTIVE

    How to turn on an Asus laptop?

    If you open the lid, that is, the screen, of the laptop, then in the upper right corner above the keyboard you will find the Power button. Pressing it once will turn on the computer. If it does not turn on when pressed, then it is worth checking the battery charge, you can simply connect the charger to the laptop and try to press the button again.

    READ  How to turn off the flashlight on iPhone 10

    How to understand that the power supply is not working?

    • The computer shuts down by itself at any time.
    • Requires multiple PC launches to boot successfully.
    • The cooler in the power supply unit does not spin.
    • The computer starts up, but shuts down after a few seconds.

    What other ways are there to turn on the laptop without a button

    Some laptops are not equipped with keys to enter a special menu. Turning on the device will not work without it. But the launch can be done from the motherboard through the BIOS. To get to it, you need to disassemble the laptop case.

    We start the laptop without the power button

    We do not recommend disassembling your laptop and trying to fix a button if you have never worked with such equipment before. Failure to do so can damage other components. Better to use the services of a professional or turn on the laptop without a button. Sometimes only the top of the button breaks, while the switch remains intact. To start the device, you just need to press the switch with any convenient object.

    How can you turn on a laptop without a button

    It is not advised to disassemble the laptop on your own and try to fix a button that does not work, if no work has been done with such devices before. Incorrectly performed actions will lead to breakage of other elements.

    It is best to use the services of specialists or turn on the device without a button. In some cases, only the top is broken, and the switch is in working order. To start the laptop, you will only need to press the base of the button in any available way.

    How to turn on a laptop without a power button, is it possible?

    Tell me, can I turn on the laptop if the power button does not work? The fact is that I have already changed it 1 time, I used to press it 10 times while the laptop was turned on (the laptop case in the place of the button is damaged, so something always gets under the button).

    The question is, of course, an interesting one. If you can turn off the laptop in different ways, including without physical keys (buttons), then turning it on is more complicated. Much more depends on the model and design of your device.

    In this article I will give several options for solving the problem, so to speak, with minimal “costs”. So.

    ways in which you can turn on the laptop and sleep mode without the power button

    Any, even the best laptop is not immune from the most common problem faced by users. the breakdown of the power key. Of course, if this problem occurs, you should contact the technical service for repair. If there is no such possibility yet or an urgent start of the computer is required, the question arises. how can you turn on the laptop without a working power button? There are several methods to start the laptop in a different way.

    How to turn on a laptop without a power button

    A broken power button on a laptop is a common problem for many users. This situation leads to the inability to start the device. It would be most correct to fix the button, but it is not always possible to do this manually or immediately take it to a service center for repair. You can start the device without this button, but this is done in two simple ways.

    Power ON function

    It is better to take care of how to turn on the laptop in advance if the start button breaks. In addition, this method will be useful for those who start the system through the Boot Menu. You just need to set certain parameters, and you can turn on the laptop from the keyboard. Follow the instructions:

    • Enter BIOS via Boot Menu or in any other convenient way.

    Go to the Power Management Setup or Power section. Partition names may vary depending on the BIOS manufacturer.

    Find the item “Power ON function” and set the value to “Any Key”.

  • Now you can reboot the device, just do not forget to save the settings before exiting.
  • Thanks to the change in this parameter, the laptop can now be started by pressing absolutely any key on the keyboard. After fixing the Power button, you can return the reverse settings in the same way if this configuration does not suit you.

    Today we have analyzed two options, thanks to which the mobile computer is turned on without a corresponding button. Such methods allow you not to disassemble the device for manual repair and do not urgently carry it to a service center for repair.

    We are glad that we were able to help you solve the problem.

    Bookmark the site Lumpics.ru and we will still be useful to you. Thank the author, share the article on social networks.

    Describe what did not work for you. Our experts will try to answer as quickly as possible.

    Power ON in BIOS

    Using the BIOS menu, you can assign a specific key combination to start the laptop. After this procedure, the performance of the main Power becomes not particularly important.

    To perform this operation, follow the instructions:

    • Enter BIOS (press the F2 key after starting the laptop).
    • After booting the system, look for the command “Power Management” in the continuation of “Setup” or “Power”, depending on the model.
    • In the menu that opens, select the command “Power on function” (these are the system power settings) or “Power On by PS2 KB / MS”.
    • Next, click “Any Key”, after “Hot Key”. now you can set the desired combination on the keyboard with which you will start Windows.
    • Press F10 to confirm the settings. Enter.

    Reboot your laptop. Now, to turn on the system, you just need to click on the selected combination.

    Disassembly

    In order to figure out how to turn on the laptop without the power button and why it “refuses” to work, we remove the battery. As soon as the battery is removed, proceed to the next step. The laptop model is of great importance here. It depends on it where the power button is located: on the case, on the side, near the keyboard, on the panel above. Let’s start with the last option. If the button is located on the top of the panel, we need a neutral flux, a screwdriver and a soldering iron. Gently pry off the bezel. For this we use a screwdriver. Next, we solder two conductors, thereby bringing them up. To do this, we drill two holes on the top panel. This is required as it is not recommended to use an open device. We install the panel in place. We perform all actions carefully so that a short circuit does not happen.

    Input device

    Before moving on to drastic measures, let’s discuss how to turn on the laptop without the power button from the keyboard. This option exists, but it needs to be configured in advance while the device is still working well. To activate the required function, go to the BIOS. To do this, press the Delete button continuously. The BIOS menu appears. We use arrows to work with it. If we have an HP laptop, go to the Power Management Setup section. We open the power settings. To do this, use the Power on Function item. In some BIOS models, the required function may be called Power On by PS2 KB / MS. Next, we indicate the method of turning on the laptop. To make it work with one key, select Any Key. We confirm the changes with the F10 key and press Enter. To enable activation by means of a specific button, instead of Any key, select Hot Key. We indicate the most suitable keyboard shortcut. Apply changes with F10.

    If the laptop does not turn on already, and the previously described settings were not made, it is impossible to activate it from the keyboard, so go to the next section of this material. It describes a step-by-step process for solving the problem.

    Until the last screw

    Now let’s consider how to turn on the laptop without the power button, if the element of interest to us is located on the side of the case. In this case, we disassemble the entire apparatus. We start with the display. We remove the caps from the mounts on it. Next, let’s move on to the keyboard. Disconnect it. We unscrew all the screws from the bottom cover, remove the top one. We get access to the very place to which the button is connected. Solder two parallel conductors under neutral flux. We bring them out. We assemble the laptop in the opposite order. The last one is to connect the battery, as well as the mains cable.

    Launch

    The laptop model does not really matter when using this manual, since the basic elements of different laptop computers are similar. We turn on the laptop. To do this, using tools with insulated handles, we connect the wiring together. We use pliers or a screwdriver. Thus, it will be possible to avoid an unpleasant and painful electric shock. There are cases in which the button is pressed and is in its place, and the laptop for some reason does not want to turn on. Here it is especially necessary to understand the reasons. This situation can be caused by minor malfunctions and major breakdowns. In the first case, the problem can be eliminated by hand. Sometimes starting does not occur because the battery or the connection cord has been damaged.

    Details on how to turn on the laptop without the power button

    Now we will look at how to turn on the laptop without the power button. There are situations in which it is necessary to bring the device into working condition urgently. However, the trigger button at this moment may “refuse” to work. Let’s try to figure out what to do in a similar situation.

    Tools

    So, let’s get down to a direct discussion of the question of whether it is possible to turn on the laptop without the power button and how to do it. To begin with, we need the following tools: a soldering iron, neutral flux, electrical tape, a screwdriver and pliers equipped with an insulated handle, a tester. Situations are different, for example, if an HP laptop is used, the “start” button can get stuck in the plastic panel. This often happens with devices from other manufacturers. In any case, the laptop is useless in this state. First of all, we clarify whether the warranty period at the service center has expired. The fact is that we have to disassemble the device, which will make further free repairs impossible.

    External elements

    We check the outlet for voltage. If it is present, disconnect the cord from the laptop and check it on the connection. If the problem is caused by the battery, remove it and connect the device directly to a power source. We perform similar actions with a special device. a tester. When replacing the battery, disconnect the laptop from the power source.

    It is much more difficult to solve problems with starting the device if the damage has touched the basic I / O system, video card or microcircuits. In this case, it is possible to determine the cause of the breakdown only with special devices. oscilloscope or probes. This will have to be done at the service center. Another problem that only experts can solve is the unexpected freeze and failure of the restart button. Now you know how to turn on your laptop without the power button.

    BYRGPUB.COM 2021