Step. configuring language settings

Allows you to set the menu display language as well as the track for digital TV. Provided that the channel is broadcast in several languages ​​at once. Also, the user will be able to customize the main and auxiliary language support.

It is imperative to configure the language for voice search and keyboard. Absolutely all of the options listed above can be edited in one menu. How to enter it? Follow this step by step algorithm:

• Take your remote control.
• Click on the “Home” button. the icon with the image of the house.
• Go to the “Settings” section. the gear icon.

• Click on “”. the ellipsis icon.
• Select the “General” tab.

• Go to the subsection “Language”.

It is clear that if the default language is Russian, then this step can be skipped.

Step. date and time

Sometimes it is the incorrectly set date and time that causes various software failures. Therefore, before you tune the television, you must first set these parameters. For this:

• Take your remote control.
• Click on the “Home” button. the icon with the image of the house.
• Go to the “Settings” section. the gear icon.
• Click on “”. the ellipsis icon.
• Select the “General” tab.
• Go to the subsection “Time and date”.

Should I consider adjusting the sleep timer and automatically turning on / off the TV as a mandatory setting for LG? In principle, each user chooses these parameters based on their own preferences.

Basic LG TV settings when you turn it on for the first time

Setting up your LG TV starts right after it is turned on for the first time. Of course, this is not a prerequisite, so you can ignore setting such parameters as time, date, language, sleep timer, etc. However, it is better to do everything at once, so as not to return to this issue in the future.

We bring to your attention a step-by-step guide, after reading which you can set all the necessary parameters. In total, you will spend a minimum of free time on everything. The main thing is to follow the suggested recommendations.

Step. choice of location

Using the parameters of the remote control, the user must select a country. If this is not done, then it will be impossible to set up digital TV broadcasting. The region and city are configured here. You can select a country from the drop-down list or simply by specifying the postal code. Modern models are equipped with the option of automatic location determination. However, if there is no Internet connection, then you will have to do it all manually.

• Take your remote control.
• Click on the “Home” button. the icon with the image of the house.
• Go to the “Settings” section. the gear icon.
• Click on “”. the ellipsis icon.
• Select the “General” tab.
• Go to the subsection “Country”.

How to search and tune channels on LG TV

A TV with a bright and rich picture is the most optimal way to spend your daily leisure. Mostly a modern user prefers to watch movies and favorite TV series online, but fans of the classics have not disappeared either, so knowledge about setting up television broadcasting will undoubtedly come to the court.

How do I tune channels on my LG TV? Devices from the popular South Korean brand have no distinctive features, at least in this matter. Therefore, the TV channels are tuned according to the standard algorithm. The only difference is that, depending on the brand, the name of commands, parameters, options will change.

The paper manual included in the basic package of the TV-device contains all the information necessary for setting up channels. However, this process is described there superficially, now we will consider the most basic commands and the specifics inherent in LG technology.

Automatic tuning

To tune your LG TV to receive digital TV, you just need to have a connection to the most common antenna. You will also need a T2 receiver, but modern models of equipment from this manufacturer are equipped with a built-in module. This means that you don’t have to buy an additional set-top box.

Auto search allows you to find both analogue and digital channels. The main advantage is speed. You do not have to enter additional values, adjust the frequency, etc. Just open the main menu, select “Automatic channel tuning” and wait for the TV-device to do everything for you.

In general, the whole process takes no more than 5 minutes. Of course, you first need to choose source of connection. a cable or an antenna. Now you know how to tune channels on your LG TV automatically.

Manual setting

If you do not have the desire and time to manually tune the channels, then you can always contact the specialists. However, everyone can also do it on their own. There are no significant difficulties on LG, the process is the same when compared to TVs from other manufacturers.

To receive channels on the TV, take the remote control and open the main menu. Then select the “Manual search” command in the settings. After that, select in the parameters “Cable digital TV”, and also specify the frequency. 170,000 kHz. Set the speed to 6900, and the modulation to 1280 AM. Then click on the “Start” button.

When the tuning of channels on this frequency is completed, a notification will appear in the menu, how many programs have been found and stored. After that, you need to change the frequency: set 178000, the speed and modulation remain unchanged. Run the search again. Gradually increase the frequency by 8000 kHz. This is how HD broadcasting is configured.

How to clear the cache

The system requires the user to clear the cache in order to reduce the load on the RAM. However, it is absolutely not necessary to delete temporary files of absolutely all applications, it will be enough to clear the cache of the browser you are using.

Remember that deleting temporary files of absolutely all applications will lead to the fact that the settings set in them will be reset to the default parameters. You will need to log in to your account again.

How to clear memory on LG TV? It is enough to have a remote control handy. Follow the simple step-by-step instructions:

• First you need to go to the main menu of Smart TV. To do this, press the “Smart” button on the remote control.

• To the right or to the left (depending on the version of the installed OS) click on the “Change” button.

• Select the software you are using and click on the “Uninstall” command that appears in the window that opens.

This cleans up the memory of the LG TV. Therefore, temporary files of absolutely all applications will be deleted.

If you would prefer to clear the cache exclusively of the built-in browser, which you use directly to play content, then follow this step-by-step instruction:

• Click on the “Smart” button to switch to Smart TV mode.
• Launch the built-in browser, and then in the right corner click on the settings menu icon.
• Select the command “Clear cache”, and then again confirm the performed action.

After a short period of time, the files saved by the browser will still be deleted. After cleaning is complete, absolutely all video and audio will start playing correctly, and the error will disappear. It is advisable to restart the TV immediately after cleaning.

How to Clear Cache on LG TV Easily and Easily

Without a doubt, the owners of LG TVs were faced with the problem of lack of memory. The error code appears on the screen as soon as the user tries to play any media content. over, regardless of the type of Internet connection: cable or wireless.

How to clear memory on LG TV, thereby restoring correct operation of Smart TV? There are several proven methods, in fact, which will now be discussed. If you get an “Out of Memory” error on your LG TV, you first need to determine what caused the software failure.

Reasons for the memory overflow error

Unsurprisingly, the software glitch alert only lights up on the TV screen when you go online. That is, standard TV viewing will be available. The built-in browser of the TV is used to play multimedia content. Sometimes an error appears when trying to start an audio track or enter a game.

Please be aware that this error is in no way related to the malfunctioning of a particular website. In addition, a software failure code may not appear immediately. For example, you first started a video, but after a few minutes it is interrupted and an alert appears on the LG Smart TV screen that there is not enough memory for the TV.

A banal page reload will allow you to eliminate the error for a certain time, but definitely not for long. After a few minutes, the code will appear again.

The error appears when the user tries to play the streaming video. Gradually, the free space for storing temporary files becomes less, because of this, the picture will take much longer to download. To avoid software glitches, try to use web portals where files are saved in blocks. As a result, it will be possible to avoid cache overflow in Smart TV.

How To Set LG TV Start Up Channel ON/OFF

There are several ways to solve the problem. As noted earlier, it is not possible to expand the internal memory. Therefore, it is necessary to install additional software to prevent the error from occurring. As a result, the content will be played through such programs.

The second way is to update webOS (smart TV operating system). It is possible that in later versions such failures will be eliminated. Since the software is constantly being improved by the developers of the equipment manufacturer.

Removing applications

The internal memory stores not only temporary files, but also user-installed applications. Therefore, sometimes, in order to free up space, you have to delete applications from Smart TV that you do not use. This can be done in 2 ways.

How do I clear the memory of my LG Smart TV? First, move the cursor over the application you want to remove, then you need to open the context menu and select the “Remove” command. Confirm uninstallation again. This is how games, movies, various widgets and all kinds of programs are removed.

In addition, there is a different way to uninstall applications. Open the directory “My Applications”, and then move unnecessary files to the right corner of the screen, until the uninstallation begins. To complete the process, just confirm the action.

How to turn off the demo mode on an LG TV

Depending on the specific model of the device and the remote control itself, the option process may be slightly different. Always, if you cannot cope with the task without the help of others, contact the LG service center, the wizard, of course, not only set up the TV set, but also additionally update the software for the computer, if desired.

Let’s take a look at the option process using the example of LG Smart TV, a “smart” TV set from one book of the best manufacturers in the world community, which is trusted by millions of buyers.

Take the remote from your own LG TV and do a few subsequent actions: first, press Smart on the remote control itself and go to this section “settings”. Next, go to this section “setup”. “Mode setting”. Here you need to choose the mode in which your TV set works, in our case it will be called “home”.

Now advertising during TV viewing will stop showing on your screen.

You need to ask a question to the masters from our service center by calling the phone or writing your own question to the customer contact form.

How to Hide Demo Mode on LG TV

1st LG Smart TV setup

In this small review, we will answer the question of our readers, how to turn off the demo mode on the LG TV.

Setting up the TV set “LG” in the automatic mode

Setting up the LG TV. auto mode. Reset to factory settings and search for channels automatically.

Repair of LG TVs in 1 day

Order a repair in the presented service, and get a working device on the same day, with a guarantee up to 1 year

Find out the exact time and price of the repair Thank you, you should not

Repair of LG TVs in 1 day

Order a repair from our car service, and get a working device on the same day, with a guarantee up to 1 year

Find out the exact time and price of the repair Thank you, no need

Tags: Gadgets, demo, mode, TV, remove

How to Disable Sleep Mode on LG TV

1st LG Smart TV setup

In this small review, we will answer the question of our readers, how to turn off the demo mode on the LG TV.

Interface language options

It is important to initially choose the correct language design, both for the keyboard and for voice search, which is available on almost all LG models. In addition, the language in which the channels will be broadcast depends on these settings. To accurately specify the parameters, follow the step-by-step algorithm:

• We connect the TV to the electrical network, then we start it using the remote control (remote control). We wait a few seconds until the device is fully loaded, then press the “Home” button. She can be depicted as a “House”.
• Open the “Settings” section in the internal TV menu, select the “Advanced” sub-item. On the screen, it looks like a “Three Dots”.
• A set of tabs appears. Of these, you should choose only “General”.
• Open the “Language” section. We carefully review here so that everything is in Russian.

The interface language setting can be changed at any convenient time

How To Skip Unwated LG TV Channels

If, when you turn on the TV, all steps are performed in Russian, this does not mean that the TV is already fully tuned. It may be necessary to change the interface language for searching on the Internet or within the software.

On the newest models

The search for channels on LG smart TVs is carried out for a short time, so the owner only needs to make part-time settings, and then start an automated process. Here it is important to choose the right type of the wanted programs: analog or digital. Sometimes it is easier to do this by specifying the frequency of sending radio waves.

When setting up each channel, the user sees its parameters on the screen

For each individual program setting, you can select the mode of the incoming signal

Upon completion of the search process, the system will automatically number the programs, while paid and encrypted channels will be skipped.

Manually tuning satellite channels

This search method is more complicated, however, it becomes relevant when it is necessary to make adjustments to the initial settings, or there have been some changes in the signal provision services.

When changing satellite settings, it is recommended to perform channel search again

To perform such an operation, you need to enter the “Satellite settings” on the TV, make the necessary changes, enter the data of the transcoder and convector. After that, start the search for programs.

First, you need to cancel the entire list of channels, and then search for updated

Often, all the settings are easy to do on your own. Problems can only arise if the hardware is defective. To avoid this, the user, without fail, must strictly adhere to all instructions.

There is no picture

This may be due to improper cable connection from the antenna or set-top box. It is important to check the plug, remove and reinsert it into the connector. If Internet channels are connected, it is recommended to press the corresponding button on the distribution device and on the TV (if available).

General screen settings and format may affect the quality of signal reception.

Make sure noise canceling is turned off on your LG TV

The wrong choice of the mode between the video inputs also causes the loss of the image. Press the corresponding button on the remote control and make sure that the setting is correct.

LG TV Digital Channels: General Connection Rules

Almost all LCD TVs have a built-in digital T2 module. Therefore, there is no need to purchase a separate set-top box. Accordingly, the entire setup will be much faster.

Disable auto-update

Any Smart-TV, including LG, has an option to auto-update software and the operating system as a whole. When updated regularly, all configured programs will be reset. To avoid constantly searching for them, you should disable this option:

• We go to the “Settings” of the TV, select the item “Digital” or “Digital cable”.
• Click “Disable auto-update”.

To update the software version of the TV, it may be necessary to remove the plug from the TV connector

The settings provide two types of update “Now” or “Auto update”

However, several times a year, the developers recommend starting this process. The operating system may become outdated and, in the future, will not accept the installation of some applications. Or, perhaps, he will completely refuse to play video in new formats.

Free satellite auto tuning

To search for free programs, you need to perform a step-by-step algorithm on the TV:

• A special set-top box is purchased that connects to the HDMI output on the TV.
• If the TV model has a built-in receiver, then the satellite dish plug is connected directly to the output of the connector.
• Go to the “Menu” item, visit the “Channels” subsection.
• In the next window, click on the source, choosing “Satellite”, start the process by pressing the “OK” button.
• In the “Satellite settings” section, be sure to select the option by which the search is carried out. Only suitable when multiple plates are installed.
• Click on the “Automatic search” button and wait for the TV signal about the end of the operation.

When choosing a satellite, it is important to check the box correctly in order to save the channel parameters

As a result, the programs will be displayed in the corresponding section of the operating system.

It is better to configure programs with the Internet turned off so that there is no signal loss. Internet connection is required only when searching for IPTV channels.

check the connection settings

Most modern routers support the distribution of the Internet at a frequency of 5 GHz, the same can be said about TVs in terms of signal reception. However, it is strongly recommended to check if the TV supports the selected frequency. If everything is in order and the error persists, then it is necessary to configure the router channels correctly. To do this, use the following instructions:

• Opening the router settings.
• Go to the section “Wireless mode”.
• Go to the “Wireless Settings” menu.
• In the “Channel” field, set one of the following values: 36, 40, 44 or 48.

Depending on the router model, the section names may differ, but the principle of action is the same everywhere.

change the values ​​of the DNS address

Error 106 indicates an unstable connection, which may be the result of incorrectly selected DNS address settings. We recommend visiting certain sections of the settings and changing the values. To do this, you can use the following instruction:

• We tear off the settings by clicking on the corresponding button on the remote.
• Go to the “Network” section, and then go to the “Wi-Fi network connection” menu.
• Click on the line “Advanced settings”.

Click on the line “Advanced settings”

These simple manipulations allow you to fix error 106 on your LG TV.

Error 106 on LG TV. How to fix it? Step-by-step instruction

Many owners of modern TVs are faced with errors related to the connection to the network. They can appear during Smart TV download, browser opening and video launching from the Internet. There are a lot of reasons due to which the problem appears, so it makes no sense to disassemble each of them. In this article, let’s take a look at error 106 on LG TV, which is accompanied by the text “Network not connected”. We recommend that you carefully follow from method to method until the failure completely disappears.

checking function support

As silly as it sounds, some users are trying to turn on Wi-Fi on a TV that doesn’t even have a built-in module. Naturally, such attempts are unsuccessful. To check if your LG TV supports wireless connectivity, please refer to the following information:

• If the TV does not support Smart TV, then it cannot be connected to the Internet in any way. over, it does not matter at all how the connection is made: via a cable or an external module.
• The TV supports Smart TV, but it does not have a built-in Wi-Fi module. In this case, you can connect the device to the network via a cable, or using a special device. a repeater.
• TV without built-in Wi-Fi module, but supporting the installation of an external receiver. As a rule, it is enough to insert a special Wi-Fi receiver into the USB connector of the device, and the error will disappear.

All information about a specific TV model can be found in the instructions, or on a specialized website on the Internet.

How to fix the error?

It’s actually not difficult to fix the error that appears. You do not need any specific knowledge, skills and devices. Most often, the problem disappears after disabling or activating a certain option in the settings.

In summary, fixing error 106 on an LG TV is pretty easy. Most often, it is enough to set the correct DNS address settings and after that the problem will be solved by itself. But if none of the presented methods helped, then describe your problem in the comments. We will try to answer and help you!

From a flash drive

Basic conditions for using a flash drive to install programs:

• formatting the partition in FAT32 format;
• the presence of the distribution kit of the desired application downloaded to the root of the drive from a third-party resource in the form of an installer.

Now you need to insert the USB flash drive into the USB connector on the TV and wait a little. After a few moments, a new icon will appear on the screen, indicating the presence of an external resource. You need to click on it and the contents of the drive will open.

The installer of the required application is selected from the programs on the card and starts. Usually, you need to confirm the actions several times, since installing from external resources always involves certain risks. And by means of warnings and agreements, the publisher of the webOS operating system disclaims responsibility for possible malfunctions.

The installation will take some time. At the same time, you must not remove the drive from the TV or turn off the equipment, as such actions can lead to a failure of the installation or unstable operation of the entire system. After the process is complete, the corresponding icon will appear in the list of applications.

Sometimes Smart TV does not see the connected USB flash drive. This could be due to a malfunction of the drive itself or the USB interface on the TV. However, the second option appears much less frequently. So it is recommended to check the port functionality using other connected equipment.

On some models, there is only one USB socket (which will be occupied by another device and cannot be disconnected), or there may not be such interfaces at all. The solution to this problem will be the use of special adapters to connect a flash drive to another connector.

How to connect internet to LG TV

Internet connection is a prerequisite for using Smart TV features. Without it, the device will be like an ordinary TV, on which you can watch only terrestrial channels.

To quickly set up Smart TV on your LG TV, it is advisable to use the connection at the fastest speed. Otherwise, various lags and freezes may occur during viewing. This is especially true for watching streaming video from the Internet without downloading.

There are two ways to connect to the Internet:

• via a cable connecting the LAN connector on the TV to the corresponding connector on the router (sometimes a straight cable from the provider can be used, but this is not encouraged);
• via WI-FI to the router distributing the network (the speed will be reduced).

Also, connection using a USB-modem with a SIM-card of the mobile Internet is gaining popularity now. In some cases, it is possible to use the Internet from a smartphone using Wi-Fi interfaces (with the Wi-Fi Direct function).

How to install apps on LG Smart TV

Immediately after installation, the application will appear in the general list of programs, and will also take its place in the “My Apps” section of the main menu, which can be accessed by pressing the corresponding Smart button on the remote control.

Games are installed approximately as well. The only difference is. That for them there is a separate application “LG Game World”. There they are sorted by genre in the catalog.

You can purchase an application or game not only from a TV, but also from any device with Internet access. However, they can only be installed on LG Smart TVs.

It is worth noting. That some applications may not be available for certain regions. This is due to the specifics of the state policy in the field of information.

Installation of applications is possible both on the internal memory of the TV and on external media. But they will only work while the media is connected to TV.

TV for LG Smart TV: All Internet Content on Your TV

The appearance in the house of Smart TV from LG is becoming a rather important event, as it significantly expands the well-established understanding of the capabilities of the TV. Unlike ordinary “boxes”, such devices allow you to use all available content from the Internet and install various applications. However, it is recommended to understand in advance the procedure for setting up TV on LG Smart TV.

How to tune channels on LG Smart TV

The channels on LG Smart TVs can be digital or cable. The digital transmission method differs in that a decrypted signal is sent to the TV at once, which does not require a TV tuner. For cable TV, a tuner is required.

The channel setup process for both cases is approximately the same. It consists in performing the following actions:

• using the remote control, you need to go to the TV settings (most often this is the “Settings” button;
• in the “Channels” section, select the “Autosearch” item;
• now in the list of signal sources that appears, you must select those to which the cables or antennas are connected;
• in the next window, you will need to enter information about the service provider, which can be found on the official website (in most cases, you just need to select the desired operator from the list of the most popular ones);
• after selecting the operator and the type of channels, you must start the search by pressing the corresponding key;
• usually the process takes a few minutes, the found channels will appear in the list of available.

The system sorts the found channels on its own, and it is not always convenient for the user. But on most modern Smart TV models, you can manually arrange TV channels by assigning them the desired numbers.

When setting up a satellite connection using Smart Maps, the process is not much different. After connecting the dish, you will also need to specify information about the operator and the transmitting device itself. In this case, when choosing a signal source, a tick must be put only in front of the “Satellite”.

Best Smart TV Apps for LG

Modern LG TVs with Smart TV functionality are full-fledged multimedia centers for using various content. A variety of applications allow you to watch your favorite movies and TV shows in good HD quality, search the Internet, chat on social networks and even play games. It is impossible to name the number of existing applications for such TVs, since this number is growing every day. It’s no surprise that novice users can get confused by the abundance of suggestions. Especially for them, below are the best applications that open up impressive opportunities for the use of content.

Official

The following applications are rightly considered the most popular:

• YouTube. The full version of the application for using the most famous hosting. There are all the possibilities for watching videos, commenting and rating.
• Ivi.ru. Online cinema with different films and TV series. The regular version contains ads that you can get rid of when you subscribe.
• Gismeteo. Meteorological application with the ability to watch the weather for several days in advance. Can function as a widget and constantly display relevant data on the TV screen.
• SS IPTV. IPTV Player for LG Smart TV, which allows you to watch IP TV by paid subscription to playlists from servers.
• 3D World. Impressive 3D movie experience on TV.