How to connect a wireless joystick to Xbox 360: What to do if the wireless joystick does not connect to the game console.

recently, all connections of multimedia devices were carried out using wires. This delivered many inconvenience to users, because the wires are confused and interfered. Thanks to the development of modern technologies, it became possible to connect devices in a wireless way. This version of the connection and the game industry did not bypass. All existing consoles allow you to connect the joystick to them both by wires and without them.

But sometimes connecting the second gamepad causes complexity users. This is due to the fact that the prefix is ​​usually equipped with only one manipulator. However, if necessary, it is quite possible to connect the second gamepad.

Mating of your controller with PC, Mac, etc.

You can also connect your controller to other devices through the standard Bluetooth connection. This process is similar to conjugation with Xbox, but you probably will have to adapt some steps depending on the device.

However, as a rule, to conjure your controller with another device, press and hold the conjugation button along the upper edge next to the battery compartment. You will find out that your gamepad is in mating mode when the Xbox logo begins to flash quickly.

Now you have 20 seconds to connect the controller with the device you want to use. Open the Bluetooth conjugation integration intensity and select the controller. He must immediately connect if it is compatible.

You will need to do this if you want to play Xbox games remotely on your smartphone. Please note that the Xbox Series X and S Controller is currently originally incompatible with the iPhone or iPad, so they refuse to connect.

Microsoft promised that in the future update the support of Apple devices would be added, but you will need to connect the controller to the Xbox to apply the update.

Connect the controller using the USB-Micro-USB cable

This is a simple method that works with both wired and wireless controller. You will need a micro-USB cable, preferably attached to the Xbox One Play, and a set for charging or any other that works with your phone.

synchronize, xbox, controller, console
  • Connect the end of the USB cable to one of the Xbox One USB ports.
  • Insert the cable charging port into the Xbox One controller.
  • Wait until you see that the Xbox One button is turned on and remains like that.

How to Connect Controllers to Xbox Series S

This is that I use most of the time because I use the same wired cable to connect it to my PC. You do not need to press any conjugation button, and it’s instantly. However, you must know that it will be assigned to the profile of the current user Xbox One. Therefore, if you have several users in the console, first go into your account, and then try it. After that you can remove the cable, and it will again automatically connect to the console.

If this does not work, you can check two things. Firstly, the AA battery is not discharged, and secondly, you definitely pressed the connection button in the case of a wireless controller. Finally, you can reload the console once to check if everything works fine.

Connection to PC

This section will be useless for you if you read instructions that the manufacturer carefully puts in a box with goods. If you do not read the instructions, try everything experimentally or immediately climb on the Internet for advice, then this section is specifically for you.

There are 3 ways how to connect the Xbox One gamepad to the computer on Windows 10:

  • Using a special Xbox Wireless Adapter.
  • According to Bluetooth, using a built-in laptop or a standard external Bluetooth adapter
  • Using USB wire.

Connection of the Xbox One gamepad to PC using Xbox Wireless Adapter

This method is our choice. Because without wires it is more convenient, you can simultaneously connect up to 8 gamepads to the computer, and headphones will also work (up to 4x).

If you connect your laptop or PC through the standard Bluetooth, the headphones will not work and only one gamepad will be connected.

So, the first thing you need to do is take an adapter and stick it into a standard USB connector of your computer.

We go to Windows 10 into “Parameters”. “Devices” and in the “Other devices” section “We are looking for“ Xbox One Wireless Controller ”, if it is there, then everything OK and Windows automatically put the right drivers.

If the devices are not there, you can start pestering the Microsoft support service or run to the store change the adapter.

We take the gamepad in your hands. See the Xbox logo in the very center? This is a button. If you squeeze it for 3 seconds, the gamepad will turn on (unless you forget to insert the “living” batteries). Click and wait until this logo begins to blink.

There is another button nearby nearby. We clamp it for 3 seconds and wait until the logo at the gamepad does not start to flash quickly.

Now look at the adapter. It also has a button on it, if you press it, it starts the process of conjugation with the gamepad. We pinch it for 3 seconds and wait.

As soon as the logo at the gamepad begins to burn with constant light. the gamepad is completely connected and is ready to serve you with a weapon of victory games.

Connection of the Xbox One gamepad to PC using Bluetooth

If you clamped money on a special adapter or you can’t buy it anywhere, then you can connect the gamepad through the standard Bluetooth. For this:

synchronize, xbox, controller, console
  • Turn on Bluetooth on your laptop or PC (of course, on your PC or laptop should be a built.in or external Bluetooth adapter)
  • Turn on the gamepad using the “button”, wait until the logo starts to blink
  • Click on the gamepad button “Sworddown”. Zhdme until the logo starts to flash quickly
  • In Windows 10, we go to “Parameters”. “Devices”. “Add Bluetooth or another device”. “Bluetooth device

Connection of the Xbox One gamepad to PC using a USB cable.

If your Bluetooth Compector does not and you made money on the adapter-your choice of USB-MicroUSB wire.

  • Stick one end into the gamepad, the second in PC.
  • Waiting for Windows to install the device.
  • Play (unless of course the game supports the gamepad)

About support for the gamepad games.

This gamepad supports the XINPUT standard.

In simple language, this means that if the game comes out with the shortcut “Games for Windows”, then it supports this Xbox gamepad 100% without any unnecessary settings and emulators.

How to connect a second gamepad to Xbox One using a button on a console

Most gamers claim that you can get the maximum pleasure of the game only with a wireless connection of the gamepad.

To use a new joystick in wireless mode, you need:

  • Install two batteries or AA size battery in the gamepad.
  • Connect the prefix to the power supply and enable it.
  • Turn on the gamepad, for which press and hold the Home button (large key on top in the central part). If the “Home” button lights evenly glow, then synchronization with this gamepad was carried out earlier and the process is not required to repeat the process. If this gamepad has not previously been synchronized with your console, you will see flashing the backlight of this button.
  • Click on the button once on the left on the console responsible for synchronization of wireless devices.

Now you have 20 seconds to click on the synchronization button on the joystick. It is located on the upper end, in the immediate vicinity of the micro-USB connector.

ATTENTION! The oversight of the “Home” button of the controller will quickly flash, indicating the search for devices for synchronization. In case of successful synchronization, flashing will be replaced by a uniform glow of the “Home” button of the gamepad.

The process is over. The new gamepad is connected and synchronized with your prefix, you can enjoy the game in the company of friends.

There is another method of wireless synchronization using the Kinect prefix.

The procedure is similar to the previous method, the only difference is that you do not press the synchronization button on the console, but simply turning on all the components, direct the joystick towards the Kinect camera and press the synchronization button. The Kinect camera will catch an infrared signal from the controller and synchronization will occur in automatic mode.

What problems may arise

The most common problem is that the prefix does not perceive the gamepad. Try to perform the following actions:

  • Pull out the cable from the USB sneak and put it back. Check the port, plug and cable for external damage. But the problem can also concern the inside of the wire, for example, a layer of isolation or closed contacts is damaged. In such cases, they contact the service center.
  • If the connection is wireless, try connecting the device again. Make sure Bluetooth is turned on and works.
  • Reload the console.
  • Reload the gamepad by pressing the Xbox key. and holding it for 5 seconds. Turn on the device by pressing this button again.

If all these methods have not helped, there is a high probability of damage to the cable or port. Then repairs are needed. In this case, it is necessary to attribute the joystick to the service center or buy a new. If you understand the arrangement of the gamepad, you can do everything with your own hands.

Reference! Another problem. the joystick managed to connect, but it does not work. This nuisance is rare. We need to install the connection again. If the connection is wireless, it is highly likely that some device is interfering (this applies to Wi-Fi and Bluetooth devices). The joystick should be used away from them.

The last problem. the gamepad is outdated. Some modern games do not support outdated versions of gamepads. Unfortunately, repairs are not possible, it remains only to buy modern equipment.

There are some notes that must be taken into account:

  • One console is able to work no more than 8 joysticks at the same time.
  • It is necessary to appoint a joystick specifically for the user who will keep it (something like an account).

What problems may arise

The most common problem is that the prefix does not perceive the gamepad. Try to perform the following actions:

  • Pull out the cable from the USB sneak and put it back. Check the port, plug and cable for external damage. But the problem can also concern the inside of the wire, for example, a layer of isolation or closed contacts is damaged. In such cases, they contact the service center.
  • If the connection is wireless, try connecting the device again. Make sure Bluetooth is turned on and works.
  • Reload the console.
  • Reload the gamepad by pressing the Xbox key. and holding it for 5 seconds. Turn on the device by pressing this button again.

If all these methods have not helped, there is a high probability of damage to the cable or port. Then repairs are needed. In this case, it is necessary to attribute the joystick to the service center or buy a new. If you understand the arrangement of the gamepad, you can do everything with your own hands.

Reference! Another problem. the joystick managed to connect, but it does not work. This nuisance is rare. We need to install the connection again. If the connection is wireless, it is highly likely that some device is interfering (this applies to Wi-Fi and Bluetooth devices). The joystick should be used away from them.

The last problem. the gamepad is outdated. Some modern games do not support outdated versions of gamepads. Unfortunately, repairs are not possible, it remains only to buy modern equipment.

synchronize, xbox, controller, console

There are some notes that must be taken into account:

WHAT HAPPENS WHEN YOU CONNECT AN XBOX ONE CONTROLLER TO A PS4 ( EXPERIMENT )

  • One console is able to work no more than 8 joysticks at the same time.
  • It is necessary to appoint a joystick specifically for the user who will keep it (something like an account).

Connection to Xbox or other device when starting

When you press and hold the Xbox button on the gamepad, the console turns on automatically. But what if you want to use a controller with another device, not including the console first?

You can do this by holding the synchronization button for about two seconds. The controller must turn on, find the last known device and connect to it. and all this without turning on Xbox. If you press the synchronization button twice to return to Xbox mode when the console is turned off, it will automatically start.

Microsoft

Remember: if you want to connect to a new device (for example, to a friend’s phone), press and hold the synchronization button until the Xbox indicator starts flashing endlessly (about three seconds) to skip automatic conjugation.

BYRGPUB.COM 2022