Table of Contents

What is DFU Mode in iPhone?

It differs from the Recovery Mode in that in this mode the device does not show visible signs of life (the control button does not work, there is no image on the display).

In this mode, the iDevice works without loading the operating system shell, so no picture is visible on the iPhone display and the device does not react in any way to pressing the “Power” and “Home” buttons separately.

start, iphone, recovery, mode

How to put iPhone into DFU mode?

DFU-mode in iPhone 5 and iPhone 4, and in any other mobile device from Apple (iPhone, iPod Touch and iPad) is launched in exactly the same way:

  • Connect iDevice to your computer (it can be Windows PC or Mac).
  • Disconnect the iPhone in any way possible, or press and hold the “Home” and “Power” buttons in this state for 10 seconds.
  • After 10 seconds, release the “Power” button, while continuing to hold the “Home” button pressed.
  • Hold the Home button until the computer recognizes the iPhone in DFU mode.

Recall that it will not be possible to recognize the DFU mode in the iPhone by external signs, in this mode it does not respond to single button presses and the display does not work.

It’s good when the iPhone is working properly and all the controls work, but it also happens that one of the “Home”, “Power” buttons, or both, do not work at once, what should I do? In this case, our instruction “How to enter DFU mode on an iPhone with a broken Home or Power button, or both at once, will be useful to you.

What is DFU mode in iPhone for, for example?

DFU mode is used to restore or update the iPhone firmware (aka iOS) in cases where the required operation cannot be performed using the standard iTunes tools.

In some cases, DFU mode can fix a system crash in the iPhone, allowing the device to reboot normally.

DFU iPhone Mode: How to Enter DFU Mode and Why You Need It?

Novice iPhone and iPad users often face difficulties in the process of flashing iPhone and updating iOS to the latest version. This is especially true for the owners of jailbroken iPhones, the flashing of which from under iOS sometimes causes iTunes errors. In this manual, we will acquaint you, dear readers, with what the iPhone DFU mode is, what it is for, how to enter DFU mode and what to do if the iPhone is “stuck” in this mode and does not boot.

To do this, simultaneously press and hold down the “Power” and “Home” buttons for about 10 seconds. Then briefly press the iPhone’s power button (aka Power). A corporate logo should appear on the screen of the device, which is an indication that the device is booting in normal mode.

How to recognize DFU mode?

DFU in iPhone or iPad can be recognized only when the device is connected to a computer and only with a USB cable. It is the computer that will notify the user about the device firmware update mode. iTunes recognizes “Device Firmware Update” as a recovery mode.

How to put iPhone 11 and iPhone 11 Pro into recovery mode or DFU

Got yourself a new iPhone 11 or iPhone 11 Pro and don’t know how to put it into recovery or DFU mode? Below we will tell you everything.

These modes are used to solve iPhone problems. The method differs from the method on older models with the Home button. Also, it is important to know the difference between recovery mode and DFU mode.

Recovery mode

Unlike DFU mode, recovery mode invokes the iBoot process. The process verifies that the user is installing firmware that is either correct or newer than the current one. When iPhone is in recovery mode, there will be an iTunes connection icon on the screen. This is the only way to distinguish recovery mode from DFU.

DFU mode

DFU stands for Device Firmware Update. This is a special mode that allows you to connect your iPhone to iTunes on a Mac or PC without invoking the iBoot process. Since the method bypasses iBoot, DFU mode can be used to update iOS, rollback, and even reboot tethered jailbreak devices. When iPhone is in DFU mode, its screen is completely black.

How to put iPhone 11 and iPhone 11 Pro into recovery mode

First, update iTunes to the latest version available. If iTunes is already running on your Mac or PC, close it. If you have macOS Catalina, you can skip this step.

Connect your iPhone 11 or iPhone 11 Pro to your computer. If this is your first time doing this, start trusting the device.

Force restart your iPhone 11 or 11 Pro without disconnecting it from your computer. To do this, press the Volume Up button, then the Volume Down button, and then hold down the Side button until the iPhone restarts. Don’t release the side button until you see the Apple logo.

You can now update or restore your smartphone using iTunes or Finder in macOS Catalina. If you choose to update, the smartphone will be updated to the latest available iOS version and your data will be saved. If you choose to restore, all data will be reset.

To exit recovery mode, disconnect your iPhone 11 or iPhone 11 Pro from your computer and turn it back on as usual.

How to put iPhone 11 and iPhone 11 Pro into DFU mode

This method is mainly used for downgrading to older versions of iOS.

  • Connect your smartphone to your computer.
  • Press and quickly release the volume up button.
  • Then press and quickly release the volume down button.
  • After that press and hold the side button until the screen turns black, then press and hold the side button and volume down.
  • After 5 seconds, release the side button while continuing to hold the volume down button.
    If the Apple logo appears, the side button was held down for too long.

In DFU mode, there are no identification marks on the screen, the screen is completely black, iTunes will inform you that the device is in recovery mode.
If your device displays a screen that says to connect your device to iTunes, repeat these steps.

How to enter Recovery Mode

In order to use this recovery mode, the iPhone 5s or a similar device of another modification must be completely turned off.

  • Press and hold the Home button and connect the supplied USB cable to the phone.
  • Only after the iTunes and USB logo is displayed on the mobile screen, the held down key can be released.

Of course, the connecting cable must be connected to the computer, on which the current version of the above program for working with the iPhone device must be installed. If all your actions are performed correctly, a service message will appear on the monitor, notifying that the connection was successful.

Returning to the original iOS state through Recovery Mode

The knowledge of how to enable iPhone recovery mode is not enough to correctly and correctly carry out the entire process of this kind of software maintenance.

  • After you are connected, a system prompt will appear on the screen with three displayed (at the bottom of the window) buttons: cancel, update and restore.
  • Your choice is the last of the listed options.
  • In the iTunes window that opens, you also need to activate the “Restore” button.
  • After that, the recovery process will begin.

How to put iPhone 5 into recovery mode

A smartphone from the California Apple brand is a technological sophistication, multiplied by the absolute practicality of the device, and all this is raised to a degree of reliability. Such a statement in favor of the mentioned American company today is a kind of a priori in the industry of mobile devices. But no matter how perfect the qualities of the “apple” phone, and without a kind of airbag, which can be considered the iPhone recovery mode, in a critical situation, the user will not be able to get by by definition, since the operating environment iOS is a system whose work is associated with mandatory process. setting up functionality. Dear reader, you have to learn about this option and how to use it from the material of the presented article.

How to know if Recovery Mode is running on iPhone

If you succeed in starting the recovery mode, then the iTunes icon and the charging icon will be displayed on the smartphone screen. Since Recovery Mode is a software mode, when you start it, the device continues to respond to button presses. Just click on one of them and if the familiar iTunes icon appears on the screen, then you have successfully started the phone in recovery mode.

In rare cases, nothing will be displayed on the smartphone screen. For example, this can happen if the iPhone does not turn on due to a broken screen. In this case, you need to focus on the message in iTunes about the detection of iPhone in recovery mode.

As a reference: the concepts of “upgrade” and “rollback

The name “iPhone recovery mode” means both the implemented method of returning to the initial settings of the device, so to speak, to the factory settings, and the implementation of the algorithm for updating the operating environment by completely replacing the system files. In this case, the OS version can be left the same or upgraded to the current state. The two points described above are fundamentally different. Therefore, the user must independently decide which option is the most appropriate in terms of implementation. However, in order to determine which method is the most rational, you should pay attention to the signs of malfunction and only then activate the iPhone recovery mode.

How to Exit Recovery Mode on iPhone

The procedure for exiting Recovery Mode is as simple as the procedure for entering.

  • Disconnect the USB cable from your phone
  • Hold down the Power button and turn off your iPhone
  • Then, with a short press on the “Power” button, turn on the device
  • The iOS download should proceed as usual, with all system glitches and errors fixed.
READ  Audio drops out when recording video on iPhone

In some cases, a regular reboot of the smartphone does not help to exit the recovery mode. If you encounter such a problem, then force restart your iPhone.

  • To do this, disconnect the USB cable from the device.
  • Hold down the Home and Power buttons (on the iPhone 7, the Power and Volume Down buttons) until the Apple logo appears on the screen.

If the iPhone does not exit recovery mode even after a forced restart. write in the comments, we will tell you what special software you can use for this.

Firmware bypassing the operating system of the device

Despite the fact that the iPhone screen of the device continues to frighten with its display blackness (meaning the “Device Firmware Update” mode), iTunes detects the connected device and displays a corresponding message on the monitor. The recovery procedure remains the same (see step). However, in DFU mode, the firmware process is most correct, since the smartphone’s memory is first formatted and the operating system is installed in the cleared area of ​​the mobile storage.

  • Download the latest iOS version from the official Apple Support site.
  • Hold down the “Shift” key and click the “Restore” button.
  • Specify the directory where the downloaded version of iOS is located.
  • After a short firmware process, the user is given the opportunity to return the saved data (backup) to the updated device.
  • If you don’t have a backup, just disconnect your phone from your computer and deactivate recovery mode.

iPhone 4 or Apple device of another modification cannot be flashed with a downgraded version of iOS. However, this restriction is of a purely official nature, since today there are a lot of ways in the implementation of which the older (than the originally installed in the phone) system software, so to speak, proved to be working stably, may well be installed on the iPhone without any further negative consequences. By the way, custom firmwares are incredibly popular among the owners of presentable Apple devices, as they allow you to significantly expand the functionality of the “canned” capabilities of the official version of iOS.

Recovery Mode activation instructions

Let’s say right away that whatever state the iPhone is in, it is still possible to put it into recovery mode.

It is also worth clarifying that to perform all operations, you will need a computer with iTunes installed, as well as a USB cable to connect an iPhone to a PC or laptop.

To do this, you need to do the following:

  • Turn off your device. To do this, press (and hold) the key lock button. On older models, it is on the top, and on new ones. on the side. This button is also often called “Power”, as it is also responsible for turning on / off the device. The screen will display “slide to power off”. You just need to drag it from left to right, that is, make a swipe. Then the smartphone will turn off.
  • Take a USB cable, but don’t do anything with it yet. don’t connect the machine to your computer. Hold down the “Home” button (or “Home”. For whom, as usual). It is located in front of the device, directly under the screen.
  • Hold the Home button and connect your device to your computer using a USB cable. It is very important not to release the button while doing this. As for the computer and its operating system, it does not matter at all whether it is Windows or Mac OS.
  • An image of the cable and the brand name of the iTunes program will appear on the gadget. This will mean that the connection was successful and the device is in Recovery Mode, which is what we needed.
  • On the computer, a message will appear stating that iTunes has detected a device that has been entered into recovery mode. In the future, you will need to click “OK” in the message and the “Restore iPhone” button in the opened iTunes program.

So now you know how to enter Recovery Mode. Now you need to understand how to get out of this mode.

How to exit the mode

In principle, everything is extremely simple here.

You should do the following:

  • Remove the cable from the iPhone.
  • Turn off your gadget. To do this, hold down the “Power” button and hold it until the device starts to turn off.
  • Press Power again to turn on the device. Wait for this process to finish and the device will work normally.

As you can see, there really is absolutely nothing complicated here.

How to put iPhone into Recovery Mode. Recovery Mode

Many users don’t know how to put iPhone into recovery mode. But Recovery Mode helps to restore the device’s performance or update it. To start this mode, follow the further instructions.

Recovery Mode features

Interestingly, many users cannot clearly say what Recovery Mode is, and some even confuse it with DFU mode. By the way, we also wrote about the latter (here is the link to the article).

So, it is important to understand that the recovery mode is designed to restore the operating system to a working state, as well as update it.

Important! The use of Recovery Mode, as well as DFU, does not affect the manufacturer’s warranty obligations in any way and does not remove them.

Although some users think this way, you can find this opinion on the forums. And the difference between RM and DFU is that the former involves restoring to an earlier version of the same operating system (like rolling back a system in Windows).

The second is the bootloader mode, in which the OS is not rolled back, but reinstalled. When using DFU, there is absolutely nothing on the iPhone screen. You shouldn’t confuse these concepts!

If you have any other questions, feel free to ask them in the comments below.

Firmware bypassing the operating system of the device

Despite the fact that the iPhone screen of the device continues to frighten with its display blackness (meaning the “Device Firmware Update” mode), iTunes detects the connected device and displays a corresponding message on the monitor. The recovery procedure remains the same (see step). However, in DFU mode, the firmware process is most correct, since the smartphone’s memory is first formatted and the operating system is installed in the cleared area of ​​the mobile storage.

  • Download the latest iOS version from the official Apple Support site.
  • Hold down the Shift key and click the Restore button.
  • Specify the directory where the downloaded version of iOS is located.
  • After a short firmware process, the user is given the opportunity to return the saved data (backup) to the updated device.
  • If you don’t have a backup, just disconnect your phone from your computer and deactivate recovery mode.

iPhone 4 or Apple device of another modification cannot be flashed with a downgraded version of iOS. However, this restriction is of a purely official nature, since today there are a lot of ways in the implementation of which the older (than the originally installed in the phone) system software, so to speak, proved to be working stably, may well be installed on the iPhone without any further negative consequences. By the way, custom firmwares are incredibly popular among the owners of presentable Apple devices, as they allow you to significantly expand the functionality of the “canned” features of the official version of iOS.

As a reference: the concepts of “upgrade” and “rollback

The name “iPhone recovery mode” means both the implemented method of returning to the initial settings of the device, so to speak, to the factory settings, and the implementation of the algorithm for updating the operating environment by completely replacing the system files. In this case, the OS version can be left the same or upgraded to the current state. The two points described above are fundamentally different. Therefore, the user must independently decide which option is the most appropriate in terms of implementation. However, in order to determine which method is the most rational, you should pay attention to the signs of malfunction and only then activate the iPhone recovery mode.

Returning to the original iOS state through Recovery Mode

The knowledge of how to enable iPhone recovery mode is not enough to correctly and correctly carry out the entire process of this kind of software maintenance.

  • After you are connected, a system prompt will appear on the screen with three displayed (at the bottom of the window) buttons: cancel, update and restore.
  • Your choice is the last of the listed options.
  • In the iTunes window that opens, you also need to activate the “Restore” button.
  • After that, the recovery process will begin.

How to enter Recovery Mode

In order to use this recovery mode, the iPhone 5s or a similar device of another modification must be completely turned off.

  • Press and hold the Home button and connect the supplied USB cable to the phone.
  • Only after the iTunes and USB logo is displayed on the mobile screen, the held down key can be released.

Of course, the connecting cable must be connected to the computer, on which the current version of the above program for working with the iPhone device must be installed. If all your actions are performed correctly, a service message will appear on the monitor, notifying that the connection was successful.

Analysis and diagnostics

So, first of all, you need to understand what exactly happened to the phone:

  • Systematic “glitches” are observed during communication device operation.
  • The phone is frozen and does not respond at all to pressing the navigation keys.
  • At the first stage of loading iOS, the logo simply “hangs”, without obvious signs of OS activity.
  • When you turn on the phone, a black screen and nothing more
  • Mobile device spontaneously reboots.
  • The user is firmly convinced that the phone was not subjected to any mechanical stress, while the touch panel or one of the device’s devices: Bluetooth, Wi-Fi or a camera stopped working.

IOS Update (Device Firmware Update)

Putting the iPhone into DFU recovery mode is quite simple, however, do not forget that after the subsequent flashing process, all user information from your device will be destroyed. Therefore, if there is such an opportunity, you must first make a backup copy of the data.

  • Connect your phone to your computer with a USB connection cable.
  • Turn off the device completely.
  • Hold Home and On button for 10 seconds.
  • After the above time has elapsed, release the power key.
  • After a while, a message will appear on the computer screen that the DFU iPhone 5 recovery mode (modification is indicated as an example) is activated, that is, you can carry out further actions with the phone.

Banal reboot

  • It is necessary to simultaneously hold down the “On” and “Home” keys and hold them in this state for 10 seconds.
  • After the logo appears in the form of a bitten apple, the phone will begin to “come to life”.

How to enable iPhone recovery mode: step by step instructions

You should not immediately resort to drastic measures, one of which is considered to be the direct process of flashing. It is quite probable that an elementary “reset” will become precisely this means of restoring the operability of the illuminated communication device. Perhaps activated “Recovery Mode” is able to heal a mobile ailment. Start with simple solutions and only when they are useless, move on to more serious iPhone reincarnation scenarios.

How to enable recovery mode using the device buttons

You can put your iPhone or iPad, as well as iPod into Recovery Mode using the buttons located on the device. For iPhone models up to version 6, the algorithm of operations is slightly different from entering into the recovery mode of later versions. First, let’s look at the instructions for starting recovery mode on iPhone 3G, iPhone 4, 4S, iPhone 5, 5S, iPhone SE iPhone 6, 6S, Plus.

Connect the device to your PC with a USB cable.

Launch iTunes on your PC. Attention: the latest version of the program must be installed on your PC.

Press and hold the Power and Home buttons. If the USB cable and iTunes logo appear on the phone screen, the device is in recovery mode.

When prompted by iTunes, select the Refresh option, if available, to keep your device data. If not, select the “Restore” function to reset the phone to factory settings. After that, all personal data will be erased, and the latest version of the system is installed on the iPhone.

READ  How to see passcode on iPhone

To exit recovery mode, press and hold the Power and Home buttons at the same time, after which the device will turn off. The next time you turn it on (by pressing the power button), the device will boot normally.

In order to start recovery mode on iPhone 7 and 7 Plus, you need to take the following steps.

Connect the device to your PC with a USB cable.

Launch iTunes on your PC. Attention: the latest version of the program must be installed on your PC.

Hold down the power button and the volume down button. If the USB cable and iTunes logo appear on the phone screen, the device is in recovery mode.

When prompted by iTunes, select the Refresh option, if available, to keep your device data. If not, select the “Restore” function to reset the phone to factory settings. After that, all personal data will be erased, and the latest version of the system is installed on the iPhone.

To exit recovery mode, simply reboot your device by pressing the power button.

In order to start recovery mode on models 8 and higher, you must perform the following steps.

Connect the device to your PC with a USB cable.

Launch iTunes on your PC. Attention: the latest version of the program must be installed on your PC.

Press and quickly release the volume up button, then the volume down button. Hold down the power button. If the USB cable and iTunes logo appear on the phone screen, the device is in recovery mode.

When prompted by iTunes, select the Refresh option, if available, to keep your device data. If not, select the “Restore” function to reset the phone to factory settings. After that, all personal data will be erased, and the latest version of the system is installed on the iPhone.

To exit recovery mode, simply reboot your device by pressing the power button.

How to enter iPhone / iPad recovery mode

Recovery mode is a special mode provided by the developers of iOS devices and designed to “reanimate” any iOS device after the gadget is turned off as a result of a system failure or other software malfunction. There can be many reasons why a user decides to enable Recovery Mode on their iPhone / iPad. For example, the gadget turns off and does not start normally, the gadget does not respond to pressing the buttons on the case when the screen is on, the screen hangs on the apple logo, iTunes cannot recognize the device, or, on the contrary, the screen displays a connection to this program. There is another special DFU mode (firmware update mode), which is used when the screen of the device is completely turned off, if the phone does not charge, does not respond to connection to a PC, does not turn on when buttons are pressed. If you are a novice user, perhaps, with the above problems, it is better to contact the specialists or to the Apple service center in your city. If you can easily cope with many malfunctions of your device on your own, then try the methods of entering iPhone / iPad recovery mode that we proposed in this article. In Recovery Mode, the file system is checked and all settings are reset, as well as, if necessary, the operating system version is updated to the latest.

iPhone 8 / iPhone X: how to Force Restart, enter recovery, and DFU mode

How to put iPhone / iPad into recovery mode using ReiBoot

Apple device users will surely appreciate Tenorshare ReiBoot, which can also enter Recovery Mode on an iPhone or iPad. In this case, you literally need to “click” only once! The advantage of using a separate program for this operation is that users do not need to memorize the various combinations of buttons that are required to restart the device and which differ depending on the available model. To put your iOS device into recovery mode using ReiBoot, follow steps 1-3 below. If you also want to restore the device, follow all the steps in sequence.

Download the program from the developer’s official website and install it on your PC.

Connect your iPhone or iPad to your PC using a USB cable. Run the program.

Select the function “Enter recovery mode”, after 10 seconds, you can enter recovery mode.

If your device is not found, follow these steps to put it into recovery mode (just follow the prompts on the screen):

 For iPhone 8/8 Plus / X: Press and release the volume up button and then the volume down button. Press and hold the power button until the screen turns off. Continue to hold the button after the Apple logo appears on the phone display. Release the power button when the USB cable and iTunes logo image appears on the screen.

 For iPhone 7/7 Plus: Press and hold the Power button and Volume down button. Release both buttons when the USB cable and iTunes logo image appears on the screen.

For other iPhone models: Press and hold the Power and Home buttons at the same time. Release both buttons when the USB cable and iTunes logo image appears on the screen.

Check the model information of your device displayed on the PC screen and select “Download” to download the appropriate firmware package. Once the firmware package has been downloaded, click “Fix Now”.

After completing the process, your iPhone will be restored to factory settings, and all confidential device data will be completely erased. Click “Finish” to finish working with the program.

Thus, putting an iOS device, be it an iPhone or iPad, into Recovery Mode is not particularly difficult. You can use the special ReiBoot program for this to avoid memorizing step-by-step instructions for various models of Apple gadgets and launch Recovery Mode with just one click. After that, this program, like iTunes, will provide you with the opportunity to restore the device for subsequent successful work with it.

Get iPhone into Recovery Mode and Exit Without iTunes and Buttons

How to put your phone into recovery mode?

How to enable Recovery Mode on smartphones from different manufacturers

  • Turn off your smartphone.
  • Press and hold the Power and Volume Down buttons until the menu opens.
  • Select Recovery Mode using the volume buttons to navigate and then confirm the action by pressing the power button.

How to enter iPhone 7 into recovery mode?

To do this, you need to hold down the screen lock button and swipe to the right of the shutdown slider that appears. Hold down the Power and Volume (-) buttons and hold them for 10 seconds. Release the Power button, but keep holding the Volume (-) until iTunes prompts you to enter recovery mode.

How to exit recovery mode?

  • Press and hold the power button for more than 15 seconds
  • Remove and reinsert the battery
  • Wait for the Android device to discharge itself
  • Connect Android to PC, in ADB RUN program under Manual Command menu. ADB enter the following command adb reboot normal (does not work on all devices)

How to enter iPhone 11 into DFU?

  • press and hold simultaneously the Home button and the side (top) buttons for 10 seconds.
  • release the side (top) button, but continue to hold the Home button until iTunes or Finder displays a window stating that our gadget is recognized in recovery mode.

How to enter iPhone X into DFU mode?

Press and hold the side button until the screen turns black, then press and hold the side button and volume down. After 5 seconds, release the side button while continuing to hold the volume down button.

How to enter into DFU iPhone 8 Plus?

How to put iPhone 8, iPhone 8 Plus, or iPhone X into DFU mode:

  • Step one: install the latest iTunes and connect your device to your computer.
  • Step two: quickly press and release the “Volume” button, and then quickly press and release the “Volume.”
  • Step three: press and hold the device lock button for 10 seconds (the screen should go dark)

Put iPhone 6s / 6 / 5s / 5c / 5 / 4S into Recovery Mode

Step 1 The first step will be the same, you need to press the Power button to turn off your iPhone.

Step 2 Open iTunes on your PC / Mac. Press and hold the Home button of your iPhone and connect it to your computer.

Step 3 When the iTunes image appears on the screen, release the Home button.

In just three steps, you can easily put your iPhone 6/5/4 into recovery mode. If you want to put iPad or iPad into recovery mode, the method will be the same.

How to put iPhone into recovery mode and exit it

“What is iPhone Recovery Mode? Yesterday I connected my iPhone 6 to iTunes for the latest iOS 14 update, it said my iPhone was in recovery mode and I need to restore it. Now I cannot use my iPhone and it is not responding. What does iPhone recovery mode mean? How do I get my iPhone out of recovery mode? “

Have you ever faced a situation where your iPhone is frozen in recovery mode? You may not know anything about this until some errors happen. In fact, your iPhone will be in recovery mode while updating or restoring. Sometimes, in order to fix problems, you also need to put your iOS device into recovery mode. This guide will show you what iPhone recovery mode is and how to put your iPhone 5 / 5s / 5c / 4S / 6/7/8 / X / 11/12 into and exit from this mode.

  • What is iPhone Recovery Mode
  • How to put iPhone into recovery mode
  • How to Get iPhone Out of Recovery Mode

Basic tries to get iPhone out of recovery mode

Press and hold the Power and Home buttons for at least 10 seconds until the Apple logo appears on the screen.

When the process is complete, your iPhone will restart and exit recovery mode.

Exit iPhone Recovery Mode with iTunes

iTunes also offers a way to get your iPhone out of recovery mode, but you should be aware that this method may result in some data loss. If you have a suitable iTunes / iCloud backup file, you can refer to this method.

Step 1 Launch the latest iTunes on your computer and connect your iPhone to it.

iTunes may detect that your iPhone is stuck in recovery mode and will prompt you what you need to recover yourself.

Step 2 In the pop-up window, click the “OK” button and then use the recovery function to get your iPhone out of recovery mode.

Put iPhone 7/8 into Recovery Mode

iPhone 7/8 is designed with a capacitive Force Touch Home button. The original recovery mode has been moved to the Volume Down button. Thus, the method will be different from other iOS devices. Now You Can Check How To Put iPhone 8/8 Plus / 7/7 Plus Into Recovery Mode.

Step 1 Press the power button for 3-5 seconds until you see the presentation to turn off, slide the button to turn off your iPhone.

Step 2 Launch the latest version of iTunes on your computer. Press and hold Volume Down on iPhone 7/8 and connect to iTunes.

Step 3 Release the button when you see the iTunes icon appear on the screen. Your iPhone is now in recovery mode.

What is iPhone Recovery Mode

When you google “What is iPhone Recovery Mode”, you cannot find a straight answer. All related results talk about how to get an iPhone / iPad in or out of it. Even from the official Apple website, the answer has not yet been found. Actually, iPhone recovery mode. it is just a way to restore on your iOS device. When your iPhone enters this mode, you can restore a suitable backup and sync all iOS data to it. Apple introduces iPhone recovery mode when updating or restoring iPhone / iPad / iPod, although you hardly know your iOS device is in this state. Alternatively, you can use recovery mode to fix some iOS errors.

Best Way to Get Out of iPhone Recovery Mode

To solve the problem that iPhone freezes in recovery mode, you can try the professional iOS System Restore.It has the ability to return your iPhone to its normal state safely. You don’t have to worry about data loss or privacy issues. Just download it for free and try it.

Step 1 Run iOS System Recovery

Launch this powerful iPhone system recovery tool and connect your iPhone to it with a USB cable. Click ” Tools” in the left column and select “iPhone System Restore”. After that, you need to press the “Start” button to start waking iPhone out of recovery mode.

READ  iPhone 7 hangs on an apple

iOS Systme Recovery can automatically detect when your iPhone is frozen in recovery mode. To complete this step, you must select your iPhone model and download the refurbished device plug-in.

Step 3 Get iPhone Out of Recovery Mode

When the plugin is loaded, it will automatically fix the problem and wake up your iPhone from recovery mode.

You can learn how to get iPhone out of recovery mode from the video below:

How to put iPhone into recovery mode

During your daily use of your iPhone, you can run into problems of all kinds. In most cases, problems can be easily fixed by rebooting. Although for some tricky issues, you need to rely on recovery mode. So you can see that many iOS users are looking for a way to put iPhone into recovery mode.

How to put iPad into DFU mode?

  • press and hold simultaneously the Home button and the side (top) buttons for 10 seconds.
  • release the side (top) button, but continue to hold the Home button until iTunes or Finder displays a window stating that our gadget is recognized in recovery mode.

How to connect iPhone in recovery mode?

IPhone 7, iPhone 7 Plus, and iPod touch (7th generation): Press and hold the Top (or Side) and Volume Down buttons at the same time. Keep holding them until the recovery mode screen appears.

What to do if iTunes won’t restore iPhone?

What to do if iTunes won’t restore iPhone, iPod or iPad

  • Recommendation 1. Update the application.
  • Recommendation 2. Restart your devices.
  • Recommendation 3. Replace the USB cable.
  • Recommendation 4. Use a different USB port.
  • Tip 5. Reinstall the application.
  • Edit the Hosts file.
  • Method 8.

How to enter DFU mode on iPhone with a broken button?

Launch iTunes and hold Alt / Option (MAC) or Shift (Windows) click on Restore. Select the firmware created by redsn0w “ENTER_DFU_” and upon completion the device will enter DFU mode.

How to start iPhone 5s in recovery mode?

Disconnect the iPhone in any way possible, or press and hold the “Home” and “Power” buttons in this state for 10 seconds. After 10 seconds, release the “Power” button, while continuing to hold the “Home” button pressed. Hold the Home button until the computer recognizes the iPhone in DFU mode.

How to put iPhone into iTunes mode?

You can transfer iOS devices to this mode from any state with simple clicks on the “Home” and “Power” buttons, for this:

  • Disconnect the device completely
  • Press and hold the “Home” button;
  • Connect the device using a USB cable to a computer (this can be a Windows PC or Mac) while holding down the “Home” button;

How to Exit Recovery Mode on iPhone?

Exiting recovery mode is easier than enabling it, for this you need to restart the device in the usual way:

  • Disconnect the USB cable from the iPhone;
  • Turn off the device by long pressing the power button;
  • Turn it on again by short pressing the same “Power”;
  • Wait for the device to boot in normal mode.

How to Get iPhone Out of Recovery Mode

In some cases, iPhone may freeze in recovery mode. This happens most often when trying to install a new version of iOS. It’s easy to understand that the device is frozen, just look at the phone screen, where the iTunes logo will be displayed. Restarting does not always help.

You can get your smartphone out of Recovery Mode using the iMyFone Fixppo program. In the utility window, go to Enter / Exit Recovery Mode and connect the iPhone to the PC. The application is able to automatically detect the device that is in recovery mode, pressing one button returns it to its normal state. The process takes no more than 30 seconds, after which the phone restarts, and a sign of a successful process is displayed on the program screen.

How to put iPhone into recovery mode

You can enable recovery on any smartphone using the buttons. Touch phones often drive users into a stupor, since there are few keys in the devices. To properly perform a recovery on 4, 4 S, 5, 5 SE and 6 S models, follow these instructions:

  • The device always turns off.
  • While holding down the “Home” button, you should connect the phone to the PC using a USB cable.
  • Once connected, the iTunes logo appears on the device. Connecting to iTunes means Recovery mMode is activated.
  • Then iTunes opens through the computer, while it is important to ensure that the iPhone is in Recovery Mode.
  • After a few seconds, a window will appear on the PC screen with the inscription that the device has been detected and you need to restore the smartphone before use. The user must confirm the action with the “Ok” button.

Note! To work correctly, the latest version of iTunes must be installed on the PC.

Algorithm of action for owners of iPhone 7 and 7 Plus:

  • The gadget is connected via USB to the computer.
  • The new version of iTunes is launched.
  • Next, hold down the power and volume down buttons. After the iTunes icon and cable appear on the screen, the phone goes into recovery mode.
  • The system can offer two options: “Refresh” if data saving is available, or “Restore” to completely clear the settings to factory defaults. The user chooses himself.
  • After everything is done, you need to exit the program by restarting the iPhone.
  • The device is connected to a PC via a cable and iTunes is launched.
  • You should quickly press first the volume up key and then the volume down.
  • While holding down the power button, you must wait until the display shows the cable icon and iTunes.
  • In the iTunes program, you must select the “Update” or “Restore” option.

After confirmation, the smartphone will be cleaned and updated to the latest version of the system.

To disable recovery mode, just restart the device

Note! You can restore the system using the Tenorshare ReiBoot software. It helps you enter Recovery Mode in a few seconds. The advantage of using the additional program is that it is easy to operate, since users do not need to memorize key combinations for different models.

Recovery mode for iPhone 5s and other models using Tenorshare ReiBoot:

  • You need to go to the website of the official developer and download the program to your computer.
  • Connect the device to the computer using a cable.
  • Run the program, where the partition for entering the recovery mode is selected. After 10 sec. the mode will start.

If the device cannot be found, you need to follow these steps, which are slightly different for different models:

  • iPhone 8 and 10. Press the volume up and down buttons (one at a time). Restart the device via the shutdown key and wait until the iTunes connection icon appears on the screen;
  • Recovery Mode iPhone 7 and 7 Plus turns on after holding down the power button and turning down the volume. Thus, the device reboots and connects to the program.

Important! For other models, the actions are identical, only you need to press the power button and “Home”.

After completing the above steps, you need to check the device model information on the PC and select the “Download” item to download the new firmware. After installing the firmware, you need to go to the “Fix it now” section. Recovery mode will restore factory settings.

How to get iPad out of recovery mode

You can take the iPad out of the mode in this way:

  • The gadget connects to the computer via a USB cable.
  • Next, the TinyUmbrella utility is installed and launched (suitable for Windows and Mac OS).
  • Be sure to translate iPad into DFU Mode.
  • After the application detects the device, the “Fix Recovery” window will switch to active mode. The message “Attempt to fix recovery?” Will appear in the window that appears. (“Trying to fix the recovery”), here you must click “Yes”. The device will reboot by itself and will work normally.

Control panel in the TinyUmbrella program

Note! TinyUmbrella is a handy utility that allows you to work with any Apple technology. It allows you to quickly remove the device from Recovery Mode without using additional keys.

How to put iPad into recovery mode

To put the tablet into Recovery Mode, turn it off. Then the “Home” button is clamped, and the device is immediately connected via USB to the computer. The device should display the iTunes icon and the connected cable. This image signals the transition of the device to Recovery Mode.

Important! It is necessary to enter the gadget into special mode through the latest version of iTunes.

After connecting to the program, a window will appear on the screen with information about the successful connection of the iPad in recovery mode. Then “Ok” is pressed to start the process. To take the device out of the mode after the end of the procedure, disconnect it from the PC and reboot.

What is iPhone Recovery Mode and how to enable

Apple smartphones have been ranked among the best for many years. Despite all its advantages, the technique has its drawbacks, which often appear at the wrong moment. Recovery Mode iPhone is a kind of airbag that saves the gadget in unforeseen situations. Many users do not know what this function is for and how to use it.

What is iPhone Recovery Mode and what is it for

Translated from English, the name Recovery Mode is translated as “recovery mode”. You can launch this function to restore the working state of the smartphone in the event of an emergency. Often this mode helps in the event of software failures that do not make it possible to turn on the equipment and use it as usual.

Recovery Mode and DFU are two special modes on Apple devices

For your information! Transfer to a special mode is provided on all Apple equipment.

It is necessary to use Recovery Mode if the gadget has turned off and will not start. In this case, neither the display nor the buttons will respond to attempts to start the iPhone.

Each smartphone manufacturer adds a special feature to the menu that allows you to roll back the device to factory settings. It helps to return the phone to normal operation. IOS devices have a special feature called Recovery Mode. If a software crash occurs, a factory reset is used. The advantage of this function is the preservation of the warranty.

In general, the recovery function can be used in several cases:

  • restoration of the working state in the event of software failures. In this case, the problem affects the normal functioning of the device, blocking its inclusion. During recovery, the mode performs the following operations: checks the integrity of the files and resets the content with the settings;
  • iOS update to a new version. In the process of work, the following are checked: file integrity, firmware of additional modules and system partitions.

What is the difference between Recovery Mode and DFU mode

The main difference between these two parameters is that DFU works bypassing the operating system of the device and flashes the firmware directly. In fact, this is a convenient way to solve a number of problems if you cannot reflash through iTunes and Recovery Mode. This method will significantly improve the efficiency of recovery and serious software failures.

Recovery Mode, on the other hand, is part of the operating system and uses its resources. When Recovery Mode is activated, the display shows a cable icon and an iTunes notification. If DFU is used, the screen remains black. You can understand that the mode works only by displaying it in iTunes.

Note! Recover Mode, compared to DFC, is able to restore the iPad to factory settings without destroying the data stored on the system. The mode only fights with fixing features. The undeniable advantage is that the internal memory of the tablet is not affected.

When changing settings or software that should optimize system performance, there are often problems with turning on the device or loading the OS. In such situations, experts recommend doing a system restore immediately. This is a simple procedure that will help restore the life of the device and normal operation.

BYRGPUB.COM 2021