Table of Contents

How to distribute the Internet to Xiaomi (Redmi) via Wi-Fi or USB

With active use of the network, sometimes there is a desire to distribute the Internet through a Xiaomi (Redmi) smartphone, but it is not obvious how to do this, although intuition suggests that the solution should be simple.

This is partly the case, however, before sharing the Internet, carefully read your tariff of the cellular operator, access to which you want to share. Make sure that you have a sufficient supply of traffic so as not to end up in debt to the operator later.

It is possible to distribute from a Xiaomi smartphone in two ways:

How to distribute the Internet via USB via Xiaomi

Make sure to use an original USB cable, this is important, only it provides a stable connection to a computer or laptop, or not original, but good, complete. I am talking about this because I have a USB cable on my hands, which looks perfect, but it is only suitable for charging, it is impossible to transfer data on it due to design features.

Connect the USB cable to the computer and to the Xiaomi phone, then enter the gadget settings and find the line “Wi-Fi hotspot”. Yes, I understand the oddity of placing the USB modem settings here, previously it was available in the “Connection and Sharing” menu, but on the current firmware 11.0.3.0 it moved under the Wi-Fi roof. Find the line “USB modem”, it should be available for activation, and the status bar should say “USB connected, check access”. This means that the computer is ready to receive the Internet from the phone. After activating the function, a request will appear on the computer to connect to a new network, agree, and now you can use the mobile Internet from Xiaomi on PC.

How to share internet using Wi-Fi on Xiaomi

In the same menu, find the line “Wi-Fi access point”, activate it. Now enter the AP Settings menu. In the “SSID” line, enter the name of the Wi-Fi network to which other devices will connect to get the Internet. In the “Password” line, set the password that the connected devices will have to specify in order to establish a secure connection. Connect and enjoy the flexibility of Xiaomi to share the internet in a variety of ways.

How to distribute mobile Internet from Xiaomi to other devices?

Modern man does NOT imagine his own life without a network. The web is everywhere: on PCs, TVs, tablets and devices. The need to distribute the web from one device to others appears quite often. In cases where you have access to the grid at hand, but you need it, the mobile web comes to the rescue. It can be distributed without any problems without wires and other attributes to a user in need.

There are two methods for connecting your phone and other devices to share the web. 1st. with a USB cable, 2nd. via Bluetooth or Wi-Fi.

Wi-Fi hotspot

This method of providing access is ideal when using multiple phones, tablets or other mobile devices. This method is also very useful if the web came in handy, which is called, “on the go”.

1) Open “Settings” on Xiaomi-phone.

2) Select the item “Wi-Fi access point”. Don’t rush Go this option. Better to go to “Wi-Fi access settings”, this item is located below.

  • SSID. set the name of the network at your own discretion. By default, it will be called Redmi if you have, say, Redmi 4, 4x or 5, 5 plus;
  • Protection. we recommend choosing the option with protection (WPA2 PSK)
  • Password. enter the password (preferably from 8 different characters, so that it is more reliable)
  • Access point identification. choose a suitable option;
  • Wi-FI frequency spectrum. leaving 2.4 GHz as the most widely used value.

3) Now we are again on the previous page, located next to the “Wi-Fi access point” switch, set to “On”.

Access to the web, which is provided by a Xiaomi phone over Wi-Fi, is open. Connect to users, to which you provide the password you have given. In general, it is easier to generate a QR code, such a function is also available right there in the settings.

How the phone case works

In order not to destroy the accessory, it is good to know how it works mechanically, which parts are blocked, etc.

The entire body on the back is made of aluminum with plastic inserts. On Xiaomi Remi 4x and Xiaomi Redmi Note 4x there is also a fingerprint on the back.

There is a motherboard inside the phone. A screen is attached to one side of it. in other words, the screen, while on the other hand, is attached to the microprocessor, camera, battery, mini-boards and other elements. The screen is attached to the rear panel with special snap parts. They just lend themselves to unfastening.

Sharing via Bluetooth

The connected device must have a preinstalled Bluetooth adapter. The web is distributed only for 1 device. The Web Distributor in this case, the PC becomes.

In the “Settings” menu, select the term “Additional functions”, turned on Bluetooth.

The phone must be seen by other devices.

On the computer in the lower right corner of the monitor, find the Bluetooth icon, click on it, select “Add Bluetooth devices”.

After the phone number, select it in the list and click “Contact”.

Messages with a connection code appeared on the phone screen and on the computer monitor, which should be similar. Comparing the codes, if they are similar, then on the computer Confirm the choice, and on the phone click “Connect”.

The phone will now have an internet connection.

Question Xiaomi DOES NOT distribute internet via Wi-Fi.

If you are unable to share the web via Wi-Fi:

  • First, read the annotation provided in this article;
  • Pay attention to the name of the access point, which is entered in the “SSID” field during the option;
  • Check the “Password” field to see if you are entering it correctly when you try to connect to the access point;
  • Also check the “Wo-Fi Frequency Range”, it is better to set it to 2.4 GHz, because. A large percentage of devices work with this purity.
READ  How to turn off headphones on a Xiaomi phone

Share internet over Wi-Fi

Share the web using Wi-Fi on Xiaomi. perhaps the most ideal option. No wires will be needed and this method is perfect for laptops or tablets. Stationary PCs have integrated Wi-Fi modules, so only the USB option remains for them.

  • Turn on “Wi-Fi” on your phone;
  • I went to “Settings”, select the item “Wi-Fi access point” and activate the switch.
  • Then you need to go to “Access point settings”. By default, the Device Name (SSID), password and frequency spectrum will already be set there. The last point It is better not to touch, but you can change the SSID and password at your discretion.
  • On the computer, in the Wi-Fi list, we find our phone by the name that was specified in the SSID and click “Connect”.
  • Enter the password given earlier and you’re done.

On your phone, you can set limits in advance for the distribution of traffic:

If it is exceeded. Web distribution via Wi-Fi will be stopped automatically.

Replacing the touchscreen

The difference between the screen and the touchscreen is that the broken glass simply interferes with the introduction of the phone, and the broken touchscreen prevents the detector from working.

How to Activate Portable Hotspot in XIAOMI Redmi Note 9s – Share Internet

Changing the touchscreen is very similar to changing the monitor.

  • After removing the battery and the motherboard, clean this area from the remaining glue and dust.
  • Next, once again Warm up the phone with special paradoxes.
  • If the screen is broken, use scotch tape to prevent debris from scattering or getting into your fingers.
  • Pry the touchscreen with tweezers or other sharp object and remove.
  • Wipe and degrease the monitor mold. It is also recommended to use isopropyl alcohol, but under no circumstances do NOT use a cloth soaked in ordinary water.
  • Along the perimeter of the frame Apply glue.
  • After passing all the cables, place the new module on the case. Do not press very much, the screen will grip so well.
  • Wait a while for the fastening process to end.
  • Attach all internal components of the phone to the back link.

Using a Xiaomi smartphone as a USB modem

The second method is more “collective farm”. Why, you ask? At least since it is necessary to use a USB cable for it, as in the good old days, when there were no storages yet, high data transfer speed and some of you (younger generation) can only be heard or read

From the above, you have already realized that for this method a computer and a USB (USB) cable are useful for you. Of course, it is recommended to use a unique cable, which you can only use to charge your phone.

So, we start setting up a Xiaomi connection as a modem via USB from the phone:

  • Connect your phone with a USB cable to your PC;
  • Then we press “Settings”;
  • “Additional functions”;
  • Choosing USB. modem by dragging the slider to the “On” position.

If everything is in order, you have a grayish inscription “connected” under USB activation. modem. Also, by pulling the curtain of notifications on the main screen, you will see the notification “Modem mode is on”. Clicking on the message will open the setting. How to make it you can read above in the section “Configuring the access point”.

  • Left-click on the “Network” icon (Windows 8, 10);
  • Here you see “Local Area Connection”. connected.

To disconnect the phone as a modem from the computer, do the following:

  • Pull the curtain on the desktop;
  • Click “Disable”.

Share Internet from Redmi via USB cable

Distribution of the Internet from the phone via a USB cable. Step-by-step actions:

  • Connect Redmi to your device via USB to the Internet.
  • Open “Settings”.
  • Go to “Connections” or “Networks and Internet”.
  • Then “Mobile hotspot”.
  • And activate “USB tethering”.

How to share Internet from Redmi via Bluetooth

Distribution of the Internet from the phone via Bluetooth. This is not the fastest and most efficient option. You can send emails or transfer small files. This method is not popular with users. For example, many laptops do not have Bluetooth, so they cannot use this method.

Consider the step-by-step steps:

  • Turn on Bluetooth on two connected devices.
  • Find devices, connect them.
  • Open the “Settings” of your Redmi phone.
  • Go to “Connection” or “Networks and Internet” (depending on the version of Android) then select “Mobile hotspot and tethering”.
  • Activate “Bluetooth modem”.

How to Share Internet with Redmi: 3 Ways to Share an Access Point

Internet from your phone is needed when your home or work connection is lost. Knowing how to distribute the Internet from a phone, for example, to a computer or tablet, may sooner or later be useful. To do this, you can use the Wi-Fi hotspots feature in your phone.

share, internet, xiaomi, redmi

Xiaomi and Redmi are selling budget Android smartphones. They are good phones with many useful features. For example, you can back up photos, videos from Xiaomi to your computer via Bluetooth. If you like, you can run an FTP server on your Xiaomi Redmi phone and then use the FTP client to freely exchange files between Xiaomi and your computer.

FileZilla is a free and open source FTP application. You can connect to Xiaomi FTP server via FileZilla to upload or download files, data between mobile phone and PC via FTP.

Consider 3 ways to distribute the Internet from your phone.

Share Internet with Redmi via WI-FI

An easy way to share internet with Redmi is to make it a portable Wi-Fi hotspot. Thus, we can provide the Internet to any computer or mobile device equipped with a working network card. over, in smartphones equipped with Android, iOS Internet sharing is similar.

Consider on Redmi Note 7. Step by Step:

  • Make sure your smartphone has 3G / 4G mobile network activated. The smartphone must be unlocked. Swipe down from the top of the screen. Shortcuts to device settings are displayed. Antenna icon should be blue, otherwise press to activate it.
  • On Redmi Note 7, go to the device settings, this is the gear icon, which is located on the home screen or in the smartphone menu.
  • Tap Wireless & Networks or Connections and then tap
  • Click Tethering & Portable Hotspot.
  • Activate the Wi-Fi hotspot in your Redmi phone. Now click on “Configure Wi-Fi hotspot”. Here enter a name for the network, select a security type, enter a password. Come up with any secure password. This will prevent unauthorized third parties from using your Wi-Fi network.
  • Click “Save”. Find and configure this network to share with Redmi on another device.

How to distribute the Internet from a Xiaomi phone (MIUI 10, 11, 12)

Today it is difficult to imagine life without the Internet. The ability to access the Internet is vital for many, and it’s not even about dependence on social networks, many people have been working on the Internet for a long time.

But what if you turn off the electricity, or you are outside the Wi-Fi distribution area with your laptop? This is where your Xiaomi smartphone comes to the rescue. If you have a couple of gigabytes of traffic or unlimited Internet, you just need to distribute the Internet from your Xiaomi phone. You will learn how to do this by reading the detailed instructions in this article.

READ  How to Recover Deleted Videos on Xiaomi

As you already understood from the title, you can distribute the Internet from your phone in three different ways:

  • Via Wi-Fi, great for connecting a laptop or other smartphones;
  • Via USB (USB), this method is irreplaceable if you want to access the Internet from a stationary computer that does not have Wi-FI and Bluetooth modules;
  • Via Bluetooth (Bluetooth), it is convenient to use to connect a laptop, due to the fact that the module is preinstalled.

Each of them has its own specifics. Let’s move on to a detailed examination.

Answers to frequently asked questions

For this heading, a separate block is formed at the end of the article for ease of navigation. Ask questions in the Комментарии и мнения владельцев, email or PM. You will receive the answer in the article, so you will help other readers quickly find answers and solve the problem.

Access point activation

Being in the “Access Point” menu, to enable the option, we just had to move the “Wi-Fi Access Point” slider to the active position.

The point is active, you can connect from other devices. I also recommend enabling the “Auto Disconnect Access Point” option. it automatically disconnects the access point when there are no connected devices, which is very convenient.

And in order to continue to activate the access point from your Xiaomi smartphone even faster there is an excellent feature.

Sharing the Internet via Wi-Fi

In my opinion, this is the easiest and most effective way to distribute the Internet from a Xiaomi phone. Please note that in order to connect your computer to the phone in this way, you need a Wi-FI module. In order to use it:

  • go to “Settings”;
  • click “Wi-FI access point”.

First of all, we need to configure the access point.

Creating a Hot Button “Access Point”

To do this, you need to do a few simple manipulations:

  • pulling the notification shade;
  • pull down again;
  • go to the second space of the quick access menu by swiping to the left;
  • click “Sort”;
  • drag the “Access Point” option in the quick access menu, setting it to a position convenient for you.

Now, by pulling the shutter, you can instantly use your Xiaomi to share the Internet via Wi-Fi.

It remains to connect from the computer, for this:

  • click on the “Network” icon;
  • “Wireless network”, move the slider to the “On” position;
  • select our smartphone, in my case “Mi Phone” (the name written in the SSID field during the access point setup);
  • then click “Connect”;
  • after that you will see the inscription “Connected”.

That’s it, your computer is successfully connected to the Internet. Of course, you can also connect tablets, smartphones, etc. to your access point.

We distribute the Internet with Xiaomi via Bluetooth

The third method is more widely used when working with a laptop. This is due to the fact that it is in the laptops that the Bluetooth module is built-in. As for stationary PCs, this opportunity can also be used by purchasing the necessary equipment for this.

  • go to “Settings”;
  • “Additional functions”;
  • we move the slider “Bluetooth-modem” to the “On” position

We turn to the computer, I draw your attention to the instruction is intended for devices with a Bluetooth module. So:

How to Use Portable Hotspot in XIAOMI Redmi 8A. Share Internet

  • we find the Bluetooth icon, as a rule, it is located in the lower right corner of the screen;
  • select “Add Bluetooth device”;
  • add a device;
  • choose the type of device;
  • among the available devices, we find our Xiaomi smartphone (be sure to check the inclusion of Bluetooth on the phone);
  • a security code will appear on the phone screen, click “Connect” on PC and smartphone.

Next, you will see the inscription “Your device is ready to use”.

Question Xiaomi does not distribute the Internet via Wi-Fi.

If you cannot distribute the Internet via Wi-Fi:

  • First of all, carefully read the instructions given in this article;
  • Pay attention to the name of the access point that you entered in the “SSID” field during setup;
  • Check the “Password” field, if you enter it correctly when trying to connect to the access point;
  • Also check the “Wo-Fi Frequency Range”, preferably 2.4 GHz. a large percentage of devices work with this purity.

Internet distribution methods

The Xiaomi Redmi 9 function, which provides access to the network to other devices, works completely free of charge, unless the corresponding restrictions are imposed by the cellular operator. You can use it in a variety of ways.

Via Wi-Fi

The most popular way that Xiaomi Redmi 9 owners use the most. To distribute the Internet via Wi-Fi you will need:

  • Open device settings.
  • Go to the “Network and Internet” section (the item name may differ depending on the firmware version), and then. “Wi-Fi access point”.
  • Activate option.

Next, it remains to activate Wi-Fi on the device that you want to connect to an access point, and select Xiaomi Redmi 9 using the list of available networks.

Via bluetooth

This method largely copies the previous version, but in this case, network detection is not over Wi-Fi, but over Bluetooth. However, the internet itself works wirelessly. To set up a connection, you need to follow steps 1-3 from the previous instructions, and then activate the “Bluetooth modem” slider or put a checkmark in front of it.

To connect on a device that should receive traffic, you must activate Bluetooth and connect to Xiaomi Redmi 9 through the list of available Bluetooth networks.

Important nuances

Before turning to the methods of activating the function, it is necessary to focus on some aspects, thanks to which it will be possible to avoid misunderstandings. The Internet distribution option is available on all devices based on the current version of Android, including Xiaomi Redmi 9. The principle of its operation is that the phone begins to be used as a Wi-Fi access point, that is, it becomes a kind of router for other gadgets.

For the option to function on Xiaomi Redmi 9, 3G or 4G mobile Internet must be active, and Wi-Fi must be disabled. But even this is not enough, since mobile operators can set their own restrictions. In particular, owners of tariffs with unlimited Internet will not be able to distribute traffic. In most cases, the option works only on tariff plans with a limited gigabyte package. However, this information should be checked with your operator.

Via USB

A great option for those who want to distribute the Internet to a computer that does not support a wireless Wi-Fi connection. In this case, traffic is transmitted via USB, for which a complete cable is used:

  • In the phone settings, activate the USB tethering.
  • Connect the gadget to the PC.
  • Confirm the operation in the “Modem and access point” mode on the smartphone screen.
  • Open the list of available networks on your computer, then activate a new connection.

Now Xiaomi Redmi 9 distribute gigabytes of mobile traffic to a computer without using a wireless Wi-Fi network. At any time, the connection can be interrupted by accessing the gadget’s settings, or by disconnecting the USB cable.

How to distribute the Internet from a Xiaomi Redmi 9 phone

The Xiaomi Redmi 9 smartphone has a full range of functions necessary for a comfortable use of the gadget. In particular, it supports the tethering option. It allows you to set up a network connection for those devices where it is not available (for example, if a friend’s smartphone does not have 4G, or Wi-Fi does not work on the computer). It remains only to figure out how to distribute the Internet from the Xiaomi Redmi 9 phone.

READ  How to connect Xiaomi camera to computer

Through the app

If you can’t distribute traffic using built-in tools, you can try a special program like FoxFi. It is presented on Google Play and works according to a similar algorithm. To activate the access point, you just need to open the application, set a password and tick the “Activate Wi-Fi Hotspot”.

If necessary, you can use any other similar program. In any case, the owner of Xiaomi Redmi 9 will have access to the entire list of functions, including a connection via Bluetooth or USB.

Important nuances

Before turning to the methods of activating the function, it is necessary to focus on some aspects, thanks to which it will be possible to avoid misunderstandings. The Internet distribution option is available on all devices based on the current version of Android, including Xiaomi Redmi Note 10. The principle of its operation is that the phone begins to be used as a Wi-Fi access point, that is, it becomes a kind of router for other gadgets.

For the option to function on Xiaomi Redmi Note 10, 3G or 4G mobile Internet must be active, and Wi-Fi must be disabled. But even this is not enough, since mobile operators can set their own restrictions. In particular, owners of tariffs with unlimited Internet will not be able to distribute traffic. In most cases, the option works only on tariff plans with a limited gigabyte package. However, this information should be checked with your operator.

Via USB

A great option for those who want to distribute the Internet to a computer that does not support a wireless Wi-Fi connection. In this case, traffic is transmitted via USB, for which a complete cable is used:

  • In the phone settings, activate the USB tethering.
  • Connect the gadget to the PC.
  • Confirm the operation in the “Modem and access point” mode on the smartphone screen.
  • Open the list of available networks on your computer, then activate a new connection.

Now Xiaomi Redmi Note 10 can distribute gigabytes of mobile traffic to a computer without using a wireless Wi-Fi network. At any time, the connection can be interrupted by accessing the gadget’s settings, or by disconnecting the USB cable.

How to distribute the Internet from a Xiaomi Redmi Note 10 phone

The Xiaomi Redmi Note 10 smartphone has a full range of functions necessary for comfortable use of the gadget. In particular, it supports the tethering option. It allows you to set up a network connection for those devices where it is not available (for example, if a friend’s smartphone does not have 4G, or Wi-Fi does not work on the computer). It remains only to figure out how to distribute the Internet from the Xiaomi Redmi Note 10 phone.

Via bluetooth

This method largely copies the previous version, but in this case, network detection is not over Wi-Fi, but over Bluetooth. However, the internet itself works wirelessly. To set up a connection, you need to follow steps 1-3 from the previous instructions, and then activate the “Bluetooth modem” slider or put a checkmark in front of it.

To connect on a device that should receive traffic, you must activate Bluetooth and connect to Xiaomi Redmi Note 10 through the list of available Bluetooth networks.

Internet distribution methods

The Xiaomi Redmi Note 10 feature, which provides network access to other devices, works completely free of charge, unless the corresponding restrictions are imposed by the cellular operator. You can use it in a variety of ways.

Via Wi-Fi

The most popular way that Xiaomi Redmi Note 10 owners use the most. To distribute the Internet via Wi-Fi you will need:

  • Open device settings.
  • Go to the “Network and Internet” section (the item name may differ depending on the firmware version), and then. “Wi-Fi access point”.
  • Activate option.

Next, it remains to activate Wi-Fi on the device that you want to connect to an access point, and select Xiaomi Redmi Note 10 using the list of available networks.

Through the app

If you can’t distribute traffic using built-in tools, you can try a special program like FoxFi. It is presented on Google Play and works according to a similar algorithm. To activate the access point, you just need to open the application, set a password and tick the “Activate Wi-Fi Hotspot”.

If necessary, you can use any other similar program. In any case, the owner of Xiaomi Redmi Note 10 will have access to the entire list of functions, including a connection via Bluetooth or USB.

How to share over Wi-Fi?

The most convenient and widespread distribution method. The smartphone is used as a wireless router, allowing multiple devices to be connected.

In order to configure the network parameters, you need:

  • go to “Settings” and click on the item “Connection and Sharing”;
  • then select “Wi-Fi access point”;
  • click on “Configure access point”;
  • enter the name of your access point in the SSID field;
  • set WPA2-PSK protection;
  • enter a password;
  • specify frequency range (2.4 GHz / 5 GHz if available).
  • go to “Settings” and select “Connection and Sharing”;
  • click on the item “Wi-Fi access point”;
  • set an active value in the “Wi-Fi access point”.

For more convenient activation, we recommend placing the “hot” button in the upper curtain.

How to connect a smartphone as a USB modem?

This method is suitable for distributing mobile Internet from a smartphone to a computer:

  • connect the smartphone to the computer via a USB cable (it is better to connect with the original cable. this may affect the connection speed);
  • go to “Settings”, click on “Connection and Sharing”, then select “Wi-Fi hotspot”;
  • select “USB modem”;
  • a notification about new network connections will appear on the computer.

How to distribute mobile Internet from Xiaomi to other devices?

Modern man cannot imagine his life without the Web. The Internet is everywhere: on PCs, smartphones, tablets and TVs. The need to distribute the Internet from one device to another arises quite often. In cases where access to the grid is not at hand, but it is necessary, the mobile Internet comes to the rescue. It can be easily distributed without wires and other attributes to a user in need.

There are 3 ways to connect a smartphone and other devices for distributing the Internet: via Wi-Fi, Bluetooth or USB cable.

How to connect using bluetooth?

This method requires a Bluetooth adapter on the connected device. Unfortunately, you can only share the Internet with one device.

You will need to do the following:

  • go to “Settings”, click on “Connection and Sharing”, then select “Wi-Fi hotspot”;
  • set an active value in the “Bluetooth modem” item;
  • open the Bluetooth menu and click on the device with which you want to share the Internet;
  • verify the code on both gadgets.
BYRGPUB.COM 2021