Configuration via WI-FI

Working with setting up an IP camera via Wi-fi requires special software on a mobile device or computer. It can be obtained, depending on the type of camera, as follows:

• on the disc enclosed with the purchase. This is not available for all manufacturers’ models;
• purchase from an authorized dealer;
• download the camera manufacturer’s website and install it on your computer;
• purchase special applications for mobile devices.

It is best to configure the ip-camera using the program that can be found on the disk, this will avoid many mistakes.

• to the power grid;
• to a computer using an ordinary twisted pair Ethernet.

expensive models are capable of transmitting both power and picture via one cable. The ip-camera is connected to the receiving device either:

• through a browser;
• or via software.

Connection algorithm

The step-by-step algorithm for connecting an ip-camera is as follows:

• Determining the initial IP address of the device. Most likely, it can be found on a sticker on the box.
• After that, the local network of the computer is set to an IP address that has the parameters of the same subnet as the camera. To do this, go to the network management tab, find the “Properties” window there in the “Local Area Connection” menu, select the “Internet Protocol Version 4” option and specify the IP address of the camera in the gateway parameters.
• Change camera settings via browser. The default (public) IP-address of the camera is hammered into the search bar of any browser used. The browser finds it and offers to enter the settings window. The password and login are in the instructions of the camera.
• When organizing a security system, only one ip-camera is rarely used. Each of them will need to assign its own address. This will require some effort and the use of a WI-FI router.

Watching the video, setting up a WI-FI ip-camera for broadcasting over the Internet.

How to set up an ip camera via WI-FI?

When organizing a security system for an apartment, a country house, an office, it is not always convenient to use wired connections. Sometimes you need to configure an IP camera via WI-FI, which will allow you to receive an image from it online directly on the screen of your mobile device. The finished video, compressed to a convenient size, is instantly transmitted over network protocols. Further, with the help of special programs, it can not only be viewed, but also processed.

Connecting multiple cameras via Wi-fi router

The cameras are configured in the following way:

• Each of them must get its own ip-address. To do this, you need to connect it to the computer, then go to the “Administration” menu. After that, a side menu will appear, in which you need to select the tab: “Configuration” and then go to network connections.
• Some routers offer the ability to automatically assign addresses to each individual device. The disadvantage of using it will be the inability to view images from cameras via the Internet. To select an option, check the box “DSHP”.
• Manually configuring the camera is more difficult. The address of the router is selected, each camera will receive a serial number, which will be put after the dot at the end of the router address. A fixed addressing model is selected in the menu and sequential numbers are entered manually for each camera. In addition, you need to specify the data of the gateway and DNS IP, in both cases it will match the address of the router. The “Mask” parameter contains the numbers 255.255.255.0, this is a parameter that determines the address of the subnet host.
• The port number is indicated. Usually by default it will be equal to “80”, if it cannot be set by default, then the number “8181” is registered. You do not need to enter any more parameters, the columns of the settings window are left empty.
• Click “Apply”, disconnect the ip-camera from the computer and connect it to the router. This restores all automatic parameters on the workstation.
• Enter the new address assigned to the camera into the browser. Enter the data of the Wi-fi router network into the windows. name and password. Save.
• Reboot the camera and check if it works.

Setting up an IP camera via Wi-fi is easy and takes half an hour. A little more time will be required for the subsequent configuration of the router, in which you need to register the ip-addresses and gateways of ip-cameras and the name of the protocol used, by default. ТСР with number 1.

Watching the video, connecting the ip-camera to a wi-fi router.

How to connect to IP camera after settings?

To access the web interface of the camera via the Internet, you just need to enter your external IP address and the port that you have chosen into the address bar of the browser. If your external IP is 22.125.45.16, then the connection to the camera will look like this: 22.125.45.16:8081.

How to install BESDER Bulb wifi camera & Setup the camera in iCSee App

You must have a static IP to access devices. If you are using dynamic, then connect this service with the provider.

How to connect an outdoor IP camera?

It is located further from the power source and is connected to the Internet via a long cable. The twisted pair has limitations on the distance of laying. if they are not observed, then the resistance will completely or partially jam the signal. A similar situation with power wires. their cross section directly depends on the power of the cameras and voltage. Also remember that almost all IP cameras operate on 12V voltage, when connecting you need to use the appropriate power supply.

How to programmatically configure IP cameras

When the camera is connected to a router, it needs to be configured so that it can be accessed via the Internet. To do this, you need to connect to the Ivideon service or use manual settings.

Manual camera setup without Ivideon

If you have a regular camera, then you need to set its IP address and port through which it will be possible to connect to it. The device must be on the same network as the computer:

Setting up an IP surveillance camera through the Ivideon service

In order not to maintain your own server and forget about the network drive, you can use the online video surveillance service Ivideon. It works with any model of equipment, but for those that do not support UPnP (Universal Plug and Play) technology, you will need to manually configure the IP camera before connecting.

How to connect an IP surveillance camera via Ethernet

Twisted pair cable can be purchased with ready-made plugs, but if you need to use multiple fixed cameras, you will need a crimping tool. So you can independently adjust the length of the cable so that there are no hanging skeins and unnecessary loops.

If you use up to 5 cameras, then a router is enough, but with more devices, a switch is needed.

How to connect an IP camera to Ivideon Server?

WEB cameras can be divided into two main groups: regular and smart. A conventional camera simply transmits the image to a predetermined location or on demand from the outside. Smart cameras are a modern device that can configure itself, has additional functions and can be easily integrated with Ivideon video surveillance services.

Manual way

Step-by-step IP camera setup when connected to Invideon software.

• Once you have connected one of these IP surveillance cameras, you need to register on our service.
• Download Ivideon Server software and install it.
• In the main window you will see a group of “IP cameras”, right-click on it and select “add an IP camera.”.
• Enter a name for the camera and select a manufacturer. In order not to scroll through the entire list, just start typing the first couple of letters, and the system will display hints.
• Enter the standard IP address, you will find it on the box.
• If you did everything correctly, a login and password entry window will appear. If the camera is new, then enter the standard pair. In order not to look for factory settings, use these standard logins and passwords for IP cameras. If the settings have changed earlier, then use the current data.
• A menu appears where you can enter additional settings. They are needed if your camera model has special modules, for example, a microphone, speaker, and others. Also here you can specify ports if you use special values.

The whole process can be seen in the video. There are other detailed video instructions on our channel, don’t miss!

Stage 2: Configuring the router

Setting up a router for the IP camera to work is a little easier. First, make sure that the router is connected to your computer and has Internet access. Naturally, you will also need to enter the router settings interface. below you will find links to instructions.

Open your router’s web configurator. The function we need for our today’s purpose is called port forwarding. This feature can be named differently and located in different places. As a rule, in most devices it is referred to as “Port Forwarding” or “Virtual Server”, and is located either in a separate section of the settings, or in the categories “WAN”, “NAT” or advanced settings.

First of all, this option should be activated if it is not enabled by default.

Next, you need to give the future virtual server a unique name. for example, “Camera” or “Camera_1”. Of course, you can call it whatever you like, there are no restrictions here.

Changing the “Port range” option depends on whether you changed the connection port of the IP camera. in this case, you need to specify the changed one. In the line “Local IP-address” enter the address of the device.

How To Set Up PTZ WiFi IP Camera With iCSee App/Pro Configure Add Connect Link To Mobile Smart Phone

Set the “Local port” parameter as 8080 or leave 80. if you cannot change the port on the camera. “Protocol” must be selected “TCP”, if it is not installed by default.

Don’t forget to add a new virtual server to the list and apply the settings.

For many connected cameras, repeat the manipulation, keeping in mind the fact that you need different IP addresses and ports for each of the devices.

Let’s say a few words about the option to connect to the camera from any Internet site. For such a possibility, static IP addresses of the router and / or computer are used, or, more often, the “DynamicDNS” option. Most modern routers are equipped with this feature. The procedure consists in registering a personal domain in a special DDNS service, as a result of which you will have a link of the form http: //personal-domain.address-DDNS- provider. The domain name must be entered in the router settings and the service host must be entered there. After that, using the specified link, you can access the camera interface from any device connected to the Internet. be it a computer, laptop or even a smartphone. Detailed instructions deserve a separate description, therefore we will not dwell on it in detail.

Via USB

IP cameras can be connected to a computer, DVR or router via a USB cable. At the same time, the camera also receives power via USB and there is no need for a separate power source. However, this connection is limited by the length of the USB cable. Therefore, this method can be used if the camera and router are nearby.

How to set up an IP camera via a WI-FI router

A video surveillance system may be needed for a variety of reasons, both for a company and for an individual. The last category is very profitable to choose IP cameras: such a technique is inexpensive and you can use it without any specific skills. As practice shows, users experience difficulties during the initial setup of the device, in particular when using a router as a means of communication with a computer. Therefore, in today’s article, we want to tell you how to connect an IP camera to a network router.

Camera setup

Camera IP address

Like a router, an IP camera is a stand-alone network device that has its own IP address. It can be dynamic or static. If the camera address is dynamic and the DHCP service is enabled on the router, additional manipulations with the connection are not required. After you connect the camera and router with a cable, the router will assign an IP address to the camera and it will appear in the list of network devices.

But most IP cameras have a static IP address by default. And it may not match your network’s address range. Then, to connect the camera to the router, you need to change the address.

There are cameras that first try to get an address via DHCP. If they do not find a server, they take a static address for themselves.

Wi-Fi

This connection does not require wiring. The IP camera connects to the router over the air, via a Wi-Fi connection. But you need to keep in mind that most home routers have a short Wi-Fi range, so this solution is suitable for small rooms where the distance between the camera and the router is small and there are no obstacles between them that interfere with the signal transmission. The farther from the router, the worse the signal quality and there may be problems with image transmission. In large rooms, in buildings with reinforced concrete floors and outdoors, it is better to use a cable connection.

Connection algorithm

The step-by-step algorithm for connecting an ip-camera is as follows:

• Determining the initial IP address of the device. Most likely, it can be found on a sticker on the box.
• After that, the local network of the computer is set to an IP address that has the parameters of the same subnet as the camera. To do this, go to the network management tab, find the “Properties” window there in the “Local Area Connection” menu, select the “Internet Protocol Version 4” option and specify the IP address of the camera in the gateway parameters.
• Change camera settings via browser. The default (public) IP address of the camera is loaded into the search bar of any browser used. The browser finds it and offers to enter the settings window. The password and login are in the instructions of the camera.
• When organizing a security system, only one ip-camera is rarely used. Each of them will need to assign its own address. This will require some effort and the use of a WI-FI router.

Watching the video, setting up a WI-FI ip-camera for broadcasting over the Internet.