ADVERTISING AND DONATS
Respect for the post! Thanks for the job!
Want more posts? Looking for technology news? Read reviews on gadgets? For all this, as well as for website promotion, purchase of a new design and payment for hosting, I need help from you, loyal and grateful readers. Read more about donations on a special page.
Thank you in advance! All collected funds will be used for the development of the site. Project support is a gift to the site owner.
Run Windows Update using Windows PowerShell
Running Windows Updates in Windows PowerShell will require you to manually install the Windows Update module, download the updates, and install them.
To do this, open Windows PowerShell with administrator rights.
to install the Windows Update module for Windows PowerShell.
to connect to Windows Update servers and download updates if found.
to install Windows updates downloaded to your computer.
How to run updates from the command line in Windows 10
How to run updates from the command line in Windows 10
In some cases, Windows 10 updates fail to start from Settings. However, just updating can fix these system problems. So today we are going to talk about another way to run these updates.
Launching Update Center from Task Manager
Using the built-in task manager, you can also start the update center service. To do this, we will do the following steps:
We open “Task Manager”, by pressing the keyboard shortcut “Ctrl Shift Esc” or by selecting the appropriate item from the context menu of the button “Start”.
Launch “Task Manager” from the “Start” button menu
After the performed operations, the service will start. Update center is ready to go!
Options for enabling Update Center
To enable the service in Windows 10, you can use both the settings available in the system and use third-party applications. Consider each way.
Editing Local Group Policy Settings
This option of enabling the update center will require the user to perform more operations (compared to the previous method), but when using it, it is possible to set additional settings, including the time and frequency of updates. To do this, let’s do the following:
- Launching the dialog box “Run”, using the keyboard shortcut “Win R”.
- In the line that appears, enter gpedit.msc
- Click on the button “OK”.
Computer Configuration Administrative Templates Windows Components Windows Update
Open the option “Configure automatic updates”
In the parameters section, you can configure the type of update and its schedule. These settings can only be set if the value is set. “4”. The function of each parameter is described in more detail in the help block.
After making all the changes, click on the button “OK”.
Turn on updates and set the settings
How to enable Windows 10 update
Updated files of the Windows operating system are delivered to the user using a special program built into the system. “Update Center”. It automatically checks for new packages on the official Microsoft website and installs them. Also, with its help, you can rollback to the previous state in the event that an unsuccessful installation was carried out.
A large number of users disable this function on their computer, since after installing updates, errors often appear, and the system starts to work slowly. In some Windows assemblies, this item is disabled by default. Next, we will take a closer look at how you can activate Windows 10 Update using several methods if it is deactivated for some reason.
Option: PowerShell or Command Prompt
Using the Windows command line, you can easily start the service that is responsible for automatic system updates. To do this, you need to do the following steps:
Open PowerShell or Command line from the context menu of the button “Start”. The program should be run with administrator rights.
Launch PowerShell from the Start Button Menu
We enter the command to launch the update center
How to Run Windows Update Troubleshooter in Windows 10
To ensure that the user does not have to download each update separately, Microsoft has created a special update center. This solution is quite convenient, but it also has its drawbacks. Installation packages are downloaded in the background, consuming traffic, and installed automatically, which in some cases leads to errors and slows down the system.
Based on the above, many users are in no hurry to install them and disable this feature. In addition, you can always update Windows manually, making sure that new files do not interfere with the normal functioning of the system.
How To Update Your Windows 10 Laptop Computer. Update Drivers. Process Updates. Shown On An HP
Win Updates Disabler
With this little application, you can customize various system functions and enable or disable Windows updates. It is possible to download both the installation package and the portable version of the application from the official website of the program. Both options are the same size and only weigh about 2MB.
Download Win Updates Disabler from the official site (the site may not work on the territory of the Russian Federation).
After downloading the file, install the program or immediately launch it by unpacking the archive in case of using the portable version. To enable the update center, do the following:
- Go to the tab “Turn on”.
- We put a tick in the paragraph “Enable Windows Updates”.
- Click on the button Apply Now.
Turn on updates on the appropriate tab
These are the ways you can enable the Update Center in Windows 10. We hope that with the help of our instructions you will be able to do this without much difficulty.
Windows 10 update step by step
STEP 5. wait for the installation to complete
Then you will see the message: “Working with updates. Completed: 30%. Do not turn off the computer.”.
You just have to wait until the installation is complete.
Working with updates. completed 30% / Clickable
By the way, to see what updates have already been installed, you can use the specials. magazine. A link to it is available in Windows Update (to open Windows options. press Wini).
In the log, all updates are arranged by installation date (see screenshot below).
STEP 3. run the check and wait for the download to finish
In the “Update and Security” section, go to the “Windows Update” tab and click on the “Check for Updates” button.
Check for Updates / Screenshot for the article “How to update Windows 10”
Then Windows will check for updates. if they are found, it will automatically start downloading them (nothing more is required from you).
Note that the download can take quite a long time (depending on the speed of your Internet and the size of the updates).
Windows Update. Download Updates
If you cannot do this through the Windows settings (errors, crashes, etc.), go to the Microsoft website and click on the “Update now” link.
After downloading the update assistant. just run it and wait until it finishes working. See screenshot below.
Launching an update via the command line
If updating the system through the Windows settings did not work, then you can try to do it forcibly (through the command line).
1) To do this, first you need to run the command line as administrator (press the key combination CtrlShiftEsc. To open the task manager. Then click the file / new task and enter the command cmd. Click OK. Example below).
Run command line as admin
2) In the command line, type two commands in sequence (the screen below is for help):
- wuauclt / detectnow. searches for updates (forced);
- wuauclt / UpdateNow. installs found updates.
Updating Windows 10 via command line
STEP 1. connect your device to the internet
First you need to make sure (check) that there is an Internet connection. In most cases, it is enough just to pay attention to the network icon in the system tray (next to the clock).
How to find out the speed of the Internet on a computer. testing and verification
Note that there are ways to update without connecting to the network (however, this is much longer (you will need a special program, and you still need some kind of computer with the Internet)). Therefore, in this note, I do not consider this option.
Is it possible to update Windows using the command line?
Windows Update is one of the most notable features of Windows 10. Since with the release of Windows 10, Windows was offered to customers as a service, not as a product. In the Software-as-a-Service scenario, this caused Windows 10 updates to be enabled by default and no one could turn them off. Now, while some have criticized the move by Microsoft, it is ultimately a move towards the customer. Because Windows Update helps users stay protected from all kinds of threats and provide them with the latest and greatest solutions from Microsoft. So, for those who appreciate this service, today we will talk about another way to launch these updates.
] Run Windows Update using Windows Powershell
To run Windows Updates in Windows Powershell, you will need to manually install the Windows Update Plug-in, download the downloaded Windows Updates, and install Windows Updates. And to do this, open Windows Powershell by searching for Powershell in the Cortana search box and run it with administrator level privileges.
The Windows Update Module for Windows Powershell will be installed.
It will connect to the Windows Update servers and download updates if found.
Windows updates downloaded to your computer will be installed.
] Start Windows Update using the command line
The command line has been around for a very long time in Windows operating systems, while Windows Powershell is relatively new. Hence, it has similar capabilities for running Windows Updates, but it should be emphasized here that you do not need to download any module for Windows Updates.
First open a command prompt by searching for cmd in the Cortana search box and run it as administrator.
Click Yes to receive the UAC prompt.
Finally, enter the following commands and press the Enter key to perform the corresponding operations.
Start installing the downloaded updates:
How to update your Windows 10 PC to the latest Windows 10 version
Restart your device after installing updates:
Check, download and install updates:
It is worth noting that the command line commands mentioned above are only for Windows 10. For older versions of Windows, you need to use the following commands.
Start installing the detected updates:
Check, download and install updates: