Why iPad freezes

Any device freezes primarily due to memory load. The processor cannot cope with the volume of incoming information, and there is not enough space in the RAM to store the data that the chipset needs at the moment. This is often associated with a large number of running applications, especially when the owner uses several of them at the same time, forgetting to close the software at the end of the work.

Sometimes, the reason that the iPad freezes can be a system crash or a poor-quality update. The latter rarely happens with Apple technology, since most often the developers carefully check the operability of the firmware before sending it to the “masses”. However, even the apple brand has glitches. The biggest of them is a crooked update on iPad 2. Then many users were faced with a poor-quality operation of the operating system.

Another point that can cause a crash is the installation of the application. Despite the fact that only high-quality applications get into the AppStore, it happens that they can cause problems. If the device freezes after installing the application, you should remove it and check if the device works better after that. It is worth rebooting the iPad in a situation when it freezes, works slowly, does not launch applications, heats up.

other methods

In fact, the above methods are official options from Apple that will help return the tablet to normal performance if it does not turn off, freezes or slows down a lot. But to troubleshoot problems, you can use a few more recommendations.

Owners of a gadget with Jailbreak installed can install the Activator program on their device, in which you can set up control of a tablet or smartphone using gestures. For example, if the button does not work, but you will not be able to go to the service in the near future, you can come up with a gesture that will bring up the shutdown menu. It is important to come up with such a gesture so that it is not accidentally activated.

The official Apple website offers an option for those situations when the device has turned off, but does not turn on, but freezes in the process. The procedure was updated with the release of new smartphones, but for all versions of the tablet (iPad 2, 3, 4, iPad Mini and others) it remains the same. On the device, hold down the “Home” button and the power button and at the same time insert the cable connected to the PC. In this case, the recovery mode will turn on, and through iTunes you can turn on the gadget again, having previously restored it.

Among the fairly simple and tricky procedures that allow you to reboot the gadget, but provided that the sensor continues to work. changing the font, resetting the network settings. Both of these actions ask the user to restart the device, it is enough to agree, and the gadget will turn on and off itself.

Another option that will take time but still help restart iPad 4 and other versions is to wait until the battery runs out. It is recommended to resort to this method in a situation when the device does not respond to touches, and it is impossible to turn it off with physical buttons. It remains only to wait until it is completely discharged and then connect the device to the power supply.

Standard reboot

A standard restart for Apple means that you just need to turn off and then turn on the gadget. The method helps in cases where the device freezes, but at the same time reacts to user actions. To restart the iPad, just hold down the power button and wait until the screen dims and the shutdown slider appears on it. In some situations, the transition to this item already eliminates minor problems, so before rebooting, you should try to return to the menu and check if the problem is gone. If not, then you need to completely turn off the iPad and, if it gets hot, wait until the case cools down and turn it on again.

All ways to restart iPad

When working on mobile devices, it happens that they freeze. This can even happen with Apple’s technology, despite the fact that their iOS operating system is considered the most stable among the existing ones. Interestingly, many do not know how the iPad reboots, or rather, how it can be started. There are several ways. standard and more stringent ones that will help if the device does not respond to the actions provided by the manufacturer.

As practice shows, in most situations with iPad freezing, the user is to blame. Simple recommendations for those who do not want to face the problem of freezing. periodically turn off the device, do not run a large number of applications and turn them off when not needed. And, most importantly, you shouldn’t install dubious applications, especially in “hacker” ways from incomprehensible sources.

Force reboot

Many users wonder how to restart iPad if it is completely unresponsive. In such a situation, you will have to force restart the iPad. To do this, simultaneously hold down the power supply and the “home” button. After a few seconds, the device will turn off, all that remains is to restart it by standard pressing the “power” button.

It is important to understand that forced loading should not be used often, and you can resort to it only as a last resort, if the sensor does not work due to a failure, and it is impossible to turn off the gadget in the usual way. The fact is that a standard shutdown pre-terminates all processes, saves all information and unloads memory. If a hard reset is applied to the iPad, then the device simply turns off without any preliminary preparations. All this affects memory, it can fail over time, in addition, there is a high probability of losing unsaved information. It will simply be erased from RAM and not written to the main drive. Assistive touch

How To Reset & Restore your Apple iPad Pro 3rd Gen. Factory Reset

What if the tablet freezes and its buttons stop working? In this case, you can use another reboot mode. Assistive Touch. This method performs the same action as during a standard reboot. it unloads memory, saves data and brings the device into a state of normal operation.

Important! It should be understood that if the buttons stopped working not because of a system failure, but because of a physical breakdown, then there is no particular point in such a reboot. The buttons will not work, and without them it is not very convenient to use the gadget, here you need a trip to the service center.

However, you can restart your iPad using Assistive Touch as follows.

  • In the settings, go to the “basic” item and activate “universal access”.
  • A system key will appear, you must press it.
  • In the window that appears, go to the “device” tab.
  • Select “Screen Lock” and click on it until the usual slider for turning off the device appears.

You can turn off the iPad in this way only if it freezes, but still reacts to actions, albeit slowly.

How to restart iPhone and iPad: 3 ways

Given the high cost of the iPhone and iPad, it can be assumed that the majority of users prefer careful storage and use of their smartphones. And then the question arises. how long can the device work without rebooting without losing performance?

In theory, a preventive restart of an iPhone or iPad is not required at all, at least Apple does not mention it. However, practice shows that with continuous operation for a long period of time, the device can significantly reduce performance or even switch to “save mode”, that is, freeze or simply turn off and not respond to buttons (the problem and its solution are described here).

For the smooth operation of the smartphone, it will not be superfluous to perform a complete restart of the operating system once or twice a month. Below are the common ways to restart iPhone and iPad.

Restart iPhone and iPad standard

If you have an iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone SE (2020), iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro, or iPhone 12 Pro Max

Press and hold the volume up (or down) button and the side button together until the Turn off slider appears.

Move the slider. The shutdown process can take up to 30 seconds.

To turn on the iPhone, press and hold the side button on the right side until the Apple logo appears.

If you have an iPhone 6/6 Plus, iPhone 6S / 6S Plus, iPhone SE 2 (2020), iPhone 7/7 Plus, iPhone 8, iPhone 8 Plus

Press and hold the side button until the screen with the “Turn off” slider appears.

restart, ipad

Move the slider. The shutdown process can take about 30 seconds.

To turn on the iPhone, press and hold the side button until the Apple logo appears.

If you have an iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone SE 1 (2016)

Press and hold the top button until the screen with the “Turn off” slider appears.

restart, ipad

iPad Pro: How to Force a Restart (Forced Restart)

Move the slider. The shutdown process can take about 30 seconds.

To turn on the iPhone, press and hold the top button until the Apple logo appears.

If you have an iPad with Face ID (no Home button)

Press and hold together the volume up (or down) button and the top button until the “Turn off” slider appears.

iPad Pro. HOW TO RESTART & SHUT DOWN (11 & 12.9-inch)

Move the slider. The iPad shutdown process may take about 30 seconds.

To turn on iPad, press and hold the side button on the right side until the Apple logo appears.

If you have an iPad with a Home button

Press and hold the top button until the screen with the “Turn off” slider appears.

Move the slider. The shutdown process can take up to 30 seconds.

To turn on the iPad, press and hold the top button until the Apple logo appears.

Force restart iPhone and iPad

If the iPhone or iPad does not respond to commands (freezes), then make a forced reboot. Hard reset methods differ depending on the Apple smartphone or tablet model. The hard reboot process for all iPhone and iPad models is described in detail in this article.

Restarting iPhone and iPad via Settings

Starting with iOS 11, in the iOS Settings (iPadOS), in the General section (at the very bottom), the Turn off item has appeared, which allows you to turn off the iPhone or iPad.

For the subsequent activation, it is enough to perform the Activation procedure described in the previous section of this article.

Restart iPhone or iPad with Assistive Touch virtual button

Assistive Touch is a virtual button on the iOS screen that you can assign to various actions, including Restart iPhone or iPad.

To turn on Assistive Touch, open the Settings app and go to General → Accessibility → Assistive Touch, where you need to set the corresponding switch to On.

Then a virtual button will appear on the screen.

Press the Assistive Touch button and follow the path Device → → Restart to restart your iPhone or iPad.

Confirm your intentions by clicking the Restart button in the pop-up window that appears.

restart, ipad