How to reset iPhone not knowing password

What if I forgot the password from the iPhone. a question that can put in a dead end of any Apple product owner. Solutions of the problem. in the material RIA Novosti. RIA Novosti, 24.12.2020

Moscow, 24 Dec. RIA Novosti. What if I forgot the password from the iPhone. a question that can put in a dead end of any Apple product owner. Solutions of the problem. in the material RIA Novosti.How to unlock the iPhone through an iTuneSpecial program for Apple product owners can help in case of a forgotten password from the gadget. To do this, do not need a consultation of a specialist or campaign to the service center.If you have forgotten the password from the iPhone, it is enough: with the help of the remote service IClOUDE, the iCloud is installed on the phone and the data transmission on a wireless network is enabled, you can restore the gadget with personal account assistance when you forgot the iPhone password. To do this, it is necessary: ​​after the end of the configuration process, the question “how to restore the password on the iPhone” will disappear by itself.Resetting the counter of incorrect attempts configured to synchronize with a computer via iTunes, you can unlock the iPhone with resetting the counter of incorrect input attempts. The method is suitable if the password is not forgotten, and until the next input attempt on the screen displays not minutes, and hours and days.The following algorithm is as follows: Note that if earlier the iPhone was not synchronized with PC, then reset the counter will not work.Restoring mode to unlock an iPhone if you forgot the password-roll phone settings can be in Recovery Mode mode. This is another answer to the question of what to do if I forgot the password from the iPhone. In Recovery Mode, the gadget will roll back to the recovery point.This will require: Important: If an error 3004 appears when installing a new firmware, close all browsers and make the Internet Explorer default browser.Note that for iPhone 8 and above models, the recovery mode starts differently. The smartphone must be turned off and connect to the computer, then quickly clamp and release the audio add button, and after the same operation, it should be done with the volume key. In the end you need to press the “Power” button, and the recovery mode mode will start.Installing a new firmware via DFU mode on the iPhone if you forgot the password iPhone can be used and using the DFU mode. True, in this case, he will return to the factory state and the information will have to restore from scratch.It will be necessary: ​​an example, how to translate the iPhone X into the recovery mode DfuaPhone of the 10th model when a forgotten password can be restored as follows: After that, you can perform the same steps as in Recovery Mode mode: Install a new firmware.What to do if nothing helps?If there is no access to a computer with authorized iTunes, you can use third-party applications for restoring a blocked iPhone, such as iMyfone Lockwiper or 4UKey. The first spends recovery through the DFU mode by replacing itunes, and the second allows you to reset iPhone without iTunes and install the firmware.If nothing helps, it remains to appeal to professionals. in the service center know what to do if you forgot the password on the iPhone. During the visit, you need to have documents confirming the right of ownership of the iPhone. Only in this case, experts will be able to tell how to unlock the iPhone if you forgot the password.Why the iPhone can be the iPhone locked blocking is possible if:

But first. backup

If you are important to the data that is on the smartphone, do not forget to create a backup before further manipulations, if possible. Skip this step if the smartphone automatically copies the data in iCloud and you have a fresh copy.

To create a local backup, connect the iPhone to the computer, with which the smartphone has previously synchronized. This condition is really important because iOS requires the password-to-pass to connect to an unfamiliar PC. which you cannot do, not knowing the password.

On your computer Open iTunes (or Finder, if you have MacOS Catalina and newer) and open the section with the desired iPhone. Make sure that there is no fresh copy of iCloud, and that there is enough free space on the computer, then click “Create a backup now”.

Bacup Finder Step 1

Next you need to choose whether you want to protect backup password. Do not worry: enter the same password that is used on the phone, not required, the password is invited to create a new.

After that, it remains only to wait for the end of the backup. The procedure period depends on how much data is stored on the iPhone, and how high the data transfer rate (it is determined by the bandwidth of the computer connector and the Lightning. USB cable used).

Appendix 4UKey

If you are using an older version of iOS, or the gadget was not connected to the Internet before locking, you will not be able to reset it in the way: after the multiple input of the wrong password, the message “iPhone is disabled. Connect to iTunes “, Options wipe the iPhone will not appear.

In this case, you can use the useful Tenorshare 4UKey utility to bypass the lock and set a new password code. This program is available for Windows and MacOS and compatible with all relevant iPhone, iPad and iPod, as well as with the latest IOS and iPados versions.

Download Tenorshare 4UKey from the official site and activate the license.

Connect your smartphone to a computer using a cable and run the program.

See also  How to enable geolocation on samsung. How to locate a person by phone number without his consent?

In the main menu of the application, click on the “Start Unlock” button.

Make sure the program correctly recognized the smartphone or tablet, and click “start”.

On the screen will appear instructions for transferring the device to recovery mode. If necessary, change the type of smartphone in the top panel and follow the instructions on the screen.

After that, the application will prepare for downloading the current version of iOS. We are talking about Apple’s official firmware: You do not perform a jailbreak or otherwise compromise the device. Select the appropriate folder to save the file and click “Download”. You may need to download for a few minutes: Wait for it to complete and do not try to turn on the smartphone.

When the download is completed, click on the “Press Unlock” button. Do not touch the iPhone and do not disconnect it from the computer until the process is completed and the smartphone will not reboot (when it happens, the welcome screen will appear in different languages).

And this is all: you can re-configure the device. You can create a new code password, add data for Face ID or Touch ID, as well as restore your files and settings from the backup.

If you have any questions about the work of the program, the video will help to figure it out.

How to reset the iPhone settings if you forgot the password

If you never synchronized your iPhone with iTunes, you have no backup and not activated “Find iPhone” function in ICloud, only a way of recovery mode remains to delete the password. I will note that this method is always working, but not only password will be erased on the iPhone, and all media infals and information.

To enter the recovery mode: Turn off the iPhone, now the “Home” button and not releasing it, insert the USB cable must, the iTunes icon will appear with a cord.

If the iTunes program has not automatically opened, open it. Immediately a proposal will appear update or restore the iPhone.

Choose “Restore” and wait until the restoration is over. At the end of the process, the iPhone will be “clean” from the store and without passwords. Use!

There were questions?

You have remained questions on unlocking the phone, if you forgot the password from the iPhone? You can’t restore forgotten ID on iPhone? Write in the Комментарии и мнения владельцев and try to help you!

If you did not help not one of the listed ways or you do not remember Apple ID! Check out this instruction What to do if I forgot for ICloud, iTunes or App Store? How to reset forgotten password apple id

How to unlock iphone if you forgot the password on the iPhone?

Your iPhone password protects your device from unauthorized access, and may also prevent you from using the device, how to unlock the iPhone if you forgot the password. This message usually appears after you at least six times tried to enter the wrong password. When we see the message “iPhone is disabled”, first follows the instruction: repeat the attempt after 1 minute or repeat the attempt after 5, 15, 60 minutes.

10 trying. You will receive a message “iPhone disabled. Connect to iTunes »or your iPhone will be completely deleted if in the” Touch ID and Password “menu (or” Settings “” Password “for the iPhone without Touch ID) enabled” Reset Data “.

Too many unsuccessful attempts, and your iPhone is automatically blocked for a short period of time. If you continue to enter the wrong password, the phone will either turn off until it is connected to iTunes, or automatically erase all your data if you enabled this option. Many users want to know how to delete access code iPhone lockout without password? How to unlock off iPhone without password? How to unlock the iPhone without a password. Do not worry, this article will tell you five effective iPhone unlocking methods without password.

Phone ensures user security. There are many valuable data on your phone, including contacts, photos, accounts on social networks, passwords and even electronic wallets. Almost everything is hidden on the other side of the lock screen, and it seems that you can not get it if you don’t know the password. It seems that everything is safe, but with the iPhone there may be problems. Your iPhone 5S / 6 (Plus) / 7 (Plus) / 8 (Plus) / X / XS / XS MAX / 11/12 / 13. can be blocked by a variety of reasons. Most often, children enter the wrong password and ultimately block your phone. Here we will provide several general solutions, you can unlock the iPhone without a password.

Data recovery

If you have a backup, use it to return your data. Even if the copy is old, it will still be useful: at least you can restore contacts, part of the correspondence, photos and other files.

Make it very simple regardless of the method you used to reset to factory settings. When the smartphone restarts, you can set a new password, configure the Face ID or Touch ID, after which the data recovery mode selection window will appear: from the computer, iCloud or old iPhone. Select the most convenient method and follow the instructions on the screen to complete the synchronization.

In addition, you can connect a reassembly smartphone to a computer and download backup manually. For this cable, connect the iPhone to the PC, which was previously made a backup, and open iTunes or Finder depending on the operating system of your computer.

Open the page with the desired device. If you did everything right and successfully stolen the smartphone, “Meet your new iPhone” will appear here. Below you will see a list of available backups. Select the appropriate and do not disconnect the smartphone from the computer until the data synchronization is completed. After that, the iPhone will restart again. with all your data and settings.

Ways how to reset iPhone if you forgot password

Method Passfab iPhone Unlocker iTunes Recovery Mode DFU ICLOUD Mode Find My App Settings
Index recommendations
Need a screens password
Need a password apple id
Need iTunes
Need a computer

According to my research, Passfab iPhone Unlocker. The best and only option for resetting the iPhone 12/13 settings to the factory settings, if you have forgotten the password for the screen and the apple ID password. But if you know the Apple ID password, you can also select iTunes, recovery mode, DFU, ICloud mode, or “Find my application”, how to reset the iPhone to factory settings If you forgot the device settings password. over, if you want to quickly reset the iPhone settings or prevent other problems with the iPhone, Passfab iPhone Unlocker will continue to be your best choice.

See also  Apple Watch requires an iPhone update

Reset the iPhone to the factory settings without a password via Passfab iPhone Unlocker [the best way]

As we know, reset the settings on the iPhone without a password is quite difficult. What more complicates the task, so this is what you also forgot your Apple ID password and cannot use iTunes or iCloud to restore the iPhone factory settings. However, Passfab iPhone Unlocker. An ideal solution to restore the factory iPhone settings without a password. And it is also available to restore the factory settings iPhone 13/11/12 / X / 8/9 / 6 / 5/4. Passfab iPhone Unlocker with an absolutely reliable set of functions can easily and 100% efficiently bypassing the iPhone / iPad screens password to understand how to reset to the iPhone factory settings.

4 Reasons Select Unlock iPhone from Passfab

  • Password is not needed.
  • The highest level of success: 100%.
  • Multiple functions: Fast unlocking lock screen, reset iPhone settings to factory settings, Delete Apple ID or screen access code, MDM bypass.
  • Simple control: just need to click on-screen buttons to understand how to reset the iPhone if you forgot the password.

Use a powerful iPhone Passfab unlocking program that will make all the work for you in just 3 steps. Just follow the instructions below:

Download and install iPhone Unlocker

To start the process, simply download this software to your working PC or MAC. After installation, start the application and click “Unlock the iOS screen”.

Then plug the device to a computer or Mac and click “Start” in Intees.

You will need to download the last firmware package. Make sure that you have chosen the right path, and then click “Download” to continue.

Reset iPhone to factory settings without password

After downloading the firmware package, the program will reset the iPhone settings to factory. Click “Start” to delete iPhone Access Code.

Just wait a little. Once the password is deleted, configure your new iPhone and make changes to security settings. In case you have a common backup iTunes / ICloud, restore the iPhone from the backup.

Reset iPhone if you forgot the password through iTunes

iTunes, official iPhone media player. This is primarily a music application for Apple users. But it can be used to solve how to erase the iPhone without a password, as well as for other purposes, such as device update. If you want to access the second iPhone device, eliminate software / hardware problems or eliminate any failures, reset iPhone settings to factory settings using iTunes. The best way to make and understand how to reset the iPhone to the factory settings without a password. All you need is a connection between the device and the PC, and follow these steps:.

To erase the data from the iPhone using iTunes, you need:

  • Know Apple ID and Password.
  • Disable the “Find Me” function on your device.
  • Have you ever synchronized the iPhone with your computer and trusted him.

Reset iPhone without password in recovery mode

Iphone translation to recovery mode can eliminate a number of problems such as iPhone jam on the screen with Apple logo. Of course, it can also be used to reset the iPhone without a password in a situation, but you need to know the Apple ID password, and the “Find My Fears” function is disabled on the device.

  • 01 Load the latest version of iTunes and open it on your computer.
  • 02 Move the iPhone to Recovery Mode.
  • For iPhone 8 and newer: Press and hold one of the side buttons and one volume button. Drag the shutdown slider to turn off the iPhone. Then press and hold the “Volume Reduction” button to connect the iPhone to iTunes and enter the recovery mode.
  • For iPhone 7 and 7 Plus: Press and hold the “Side” button until you see the “Shutdown” slider. Drag it to the right to turn off the phone. Press and hold the “Volume Reduction” button until you see the recovery mode screen.
  • For iPhone 6 and earlier versions: Press the side button and release it when you see the “Shutdown” slider. Drag it to turn off the iPhone. And press and hold the “Home” button to enter the recovery mode.

Situation 1 Delete your iPhone without a screen password

There are several ways to erase the data from the iPhone, even if you forgot the password on it. Depending on the various scenarios, you can choose one of the following ways.

By the way, keep in mind that erasing your iPhone will delete all the data on it, so you call backup locked iPhone if you need.

Erase data from iPhone via icloud

After the appearance of the Find My iPhone is on on the iPhone, you can try log in to iCloud.COM and erase your iPhone.

Open the browser and visit ICloud.COM, log in with your Apple ID and password.

Step 2 Will erase your iPhone

On the device, select the one you want to erase, click IPhone, enter your ICLOUD password to confirm. After that, iCloud will start emanating data from your iPhone.

When iCloud completes erasing data from the iPhone, turn it on and adjust it. You may encounter activation lock, simply enter your Apple ID and password to unlock it. Later you can return your iPhone to normal condition.

Erase data from iPhone through iTunes

If you have previously synchronized your device with iTunes, just do it once again and use iTunes to erase the data from the iPhone, restoring it. In iTunes, go to the device Summary Restore iPhone To erase the data from your iPhone.

If iTunes cannot be successfully synchronized, you can still connect your iPhone to iTunes and erase it with the transfer of your iPhone to recovery mode.

Step 1 Enter the recovery mode

Turn off the iPhone and connect it to a computer using a USB cable,

Then, since different iPhone models use different ways to enter the recovery mode, you can follow the instructions below and set the iPhone to the recovery mode.

For iPhone 8/8 Plus or earlier models: Press and release the volume button and the volume button, then hold the side button until you see the recovery mode screen.

For iPhone 7 / 7Plus: Continue to hold the volume button and release it when you see the recovery mode screen.

For iPhone 6 / 6S or earlier models: Press and hold the main button until the recovery mode screen appears.

Step 2 Restore your iPhone

iTunes will start automatically when your device is detected. Then go to the device in the inteeis, and click the iPhone icon.

There will be a notification that your device has a problem and it must be restored or updated. Here we need to click Restore To Erase Data from Your iPhone.

See also  Connect iPhone to LG Wi-Fi TV. TVs with built-in support AirPlay

After that, iTunes starts to erase data from your device. During the process you may need to enter your identifier and password to pass the activation lock.

As soon as iTunes completes its work, you can enable the device and adjust it again.

  • There is a 15% chance to get stuck in recovery mode, if this happens, you can fix the iPhone, stuck in recovery mode.
  • If the recovery process takes more than 15 minutes, your iPhone will come out of the recovery mode, you will need to enter it again.

Erase the iPhone data using iPhone Unlocker

There is one powerful tool that you can use to erase data from iPhone: Unlock iPhone. iPhone Unlocker can help erase data from the iPhone without a password or password, you also do not need to enter the recovery mode. All you need is to connect the iPhone to a computer and run iPhone Unlocker. Then the program will need a few minutes to erase the data from your iPhone.

Step 1 Load the iPhone Unlocker to your computer

Step 2 Start it and select Wipe Passcode.

Unlocking iPhone offers 3 functions in the intees, wipe the password to erase password and data; Delete Apple ID for deleting an Apple account; and on-screen time to reset password restrictions.

Here, select Wipe Password To Erase Data from Your iPhone.

Click Start To start the process. Connect your iPhone to PC using a USB cable.

Confirm your device information and download the firmware in accordance with the model of your iPhone.

When the firmware boots to your computer, click Unlock and enter the code for cleaning the device, “0000”, click Unlock To Make Final Confirmation.

Then, unlocking the iPhone subsequently eaten your iPhone. Just wait a little.

Your iPhone can be configured for free and use after unlocking iPhonelays. Easy and fast, though? Come and find out yourself.

Reset iPhone without an Apple ID / password when the “Find My iPhone” function is disabled

Reset the iPhone to the factory settings is quite simple when the “Find iPhone” function is turned off, you can directly erase all data through the iPhone settings, DFU mode / Recovery Mode.

How to reset the iPhone settings through the iPhone settings

Go to Settings ⟶ General ⟶ Transfer or Reset iPhone ⟶ Erase Content and Settings, Enter the password to confirm, then you will see the Apple icon and the execution indicator. A few minutes later you will get a new iPhone.

Note. When you are prompted to enter an Apple ID password to disable the “Find iPhone” function, stop and first remove the Apple ID especially if you forgot it. Because the activation lock will be displayed, even if you have successfully forced the device to erase the data.

How to reset the iPhone using the recovery mode

Without using iPhone Access Code, you can restart the device using iTunes. For this method, please read the recommendations below. (Before that, make sure that the “Find iPhone” function is disabled)

Run iTunes and plug the device

To reset the iPhone settings using iTunes, you need to access the device by connecting it to the computer.

To do this, make sure that you will use the appropriate USB cable to prevent failures in the future.

Enter the recovery mode on the iPhone

You can manually enter the recovery mode by pressing certain buttons on your iPhone.

iPhone models buttons to speed up recovery mode
iPhone 8 or newer (including iPhone SE 2ND) Press and release the volume zoom button, then press and release the volume button and continue press the power button. Do not release the buttons while the iTunes / Computer connection icon appears on the screen.
iPhone 7 Continue pressing the volume button and the power button at the same time
iPhone 6S or earlier (including iPhone SE1ST) Continue simultaneously press the “Home” button and the power button.

When you see the Apple logo disappears, it means that you have successfully transferred your iPhone to DFU mode. Click to learn more about how to enter the DFU mode here.

However, if you find the aforementioned process too complicated, you can try another option.

Restoring iOS System. Free IOS Recovery Mode tool in the world can translate your iPhone to the recovery mode with just one click.

On your iTunes computer will display a notification when it detects that your device is in recovery mode.

Then you can restart your iPhone. To continue, click OK ⟶ Conclusion ⟶ IPhone Restore.

After the reset is completed, you will receive a notification, and your iPhone will automatically restart.

Now you are ready to erase your iPhone without Apple ID, regardless of whether the “Find iPhone” function is enabled or not. After that you can use the iPhone again.

Open App Settings, Touch Your Name, and you will find an Apple ID account. Then tap Find mine and you will know the status of locking activation icloud.

Open Apple ID from your web browser. Then enter your information, such as your name, surname, and email address associated with your Apple ID.

Then you can choose “Recover by email” or “Answer Safety Questions”. Then you can reset your Apple ID and password. And that yes yes! You have successfully dropped your Apple ID.

Here are some more other methods that will help you with this. Please check “if you forgot your Apple ID” from Apple Support.

Go to Appleid.Apple.COM then tap Forgot Apple ID or password? Under Control your Apple account.

On the new page you must enter Apple identifier to start. Then select Options to reset the password and select “Reply to security questions”.

Follow the step-by-step instructions to reset the password. If you can’t remember the answer to the control questions, there are other options, such as reset, receiving an email, or reset the password using the recovery key.

For more information, you can check “If you forgot your Apple ID password”.