Removing a cartridge from Samsung printers

The well-known company Samsung has previously been actively involved in the development of printers of various types. However, later this branch of production passed into the hands of another corporation called HP, after which it became the copyright holder and is responsible for product support. Nowadays such devices can still be found in the homes and offices of users, and almost everyone is faced with the task of removing the cartridge in order to carry out other actions. As part of today’s article, we would like to talk in detail about the production of this procedure using the example of an inkjet and laser device.

Laser printer

Of all the models, Samsung’s laser printers stand out the most, printing only black ink, but doing it much faster than inkjet machines. The peculiarity of their design lies in the fact that the paint is used in powder form, and is also poured into the compartment of the toner cartridge, which in turn forms a single printing system with other components. All this structure is extracted separately, and then other actions are performed. The whole operation looks like this:

  • Turn off the device and unplug it. Wait for internal components to cool down if active printing was in progress.
  • Open the top cover or scanner module if you are using an all-in-one.

Lift the inner cover by grasping the plastic tab.

Remove the toner cartridge. You can only hold on to a specially made handle so as not to damage fragile components with your fingers.

Replace the scanner unit without touching the inside of the scanner unit.

As you can see, there is nothing difficult in completing the task, however, it is necessary to take into account several important factors so that problems do not arise in the future:

  • After removing the toner cartridge from the box, keep it away from light sources and try to immediately put it away in a dark place such as a box. If you can’t pull it out quickly, cover the possible spots of light with an improvised means, for example, a sheet of paper;
  • Pay attention to the green area of ​​the cartridge. You cannot touch it with your hands; for all movements of the structure, a special handle is provided;
  • If toner gets on your clothes, wipe it off with a dry cloth, hot water will only fix the stains on your clothes;
  • Hold the entire structure together (document feeder and control box) when opening the scanner unit.

All other nuances will be associated only with the design features of specific models of printers from the company in question, so in order to avoid problems and breakdowns, before starting the entire operation, read the instructions included in the kit.

Removing the cartridge from the Samsung printer

There is nothing difficult in performing the procedure under consideration, because the main thing is to perform all steps carefully and in accordance with the instructions so as not to accidentally touch the fragile internal components of the printing equipment. In addition, each of the types has its own extraction characteristics, which you will learn about further.

Jet printer

As you know, inkjet models are designed for color printing and have several separate cartridges inside. They take up quite little space and are presented in the form of small containers. Each of them is removed in turn from a special connector. Our other article at the following link details this process using an example of a printer from HP. In the case of Samsung, no differences are observed.

samsung toner refill-Samsung Xpress M2876ND tonner refilling

As for the subsequent actions, for example, cleaning or replacing the cartridge, then these procedures are also devoted to other materials on our website. with them to learn all the subtleties of tasks and simplify their implementation.

Now you know all about removing ink cartridges from Samsung printers. As you can see, everything is done in literally a few minutes, but do not forget about precautions and accuracy.

How to remove a cartridge from the HP Deskjet 2050 All-in-One printer?

We turn on the printer. Open the paper exit tray and cartridge access door. When the carriage moves to the center of the printer and stops, lightly press on the required cartridge and pull it out of the slot. Carriage contains two cartridges.

remove, cartridge, samsung, printer

All-in-one EPSON TX219

Removing the ink cartridge is very easy on this model. Please note that manual movement of the print head is strictly prohibited. This could damage the printer.

On the control panel, press the “Index Sheet” and “Scan” buttons simultaneously. On the printer screen, use the arrows to move through the points until the inscription: “Ink replacement”. Click the Start button. Lift the printer cover and see that the print head has stopped in ink replacement mode. Open the lid and take out the cartridge of the desired color.

How to remove the cartridge from the printer “Samsung” CLP320?

This is a color laser printer with flat cartridges. To remove them, press down the button on the front cover of the printer. Inside we see four cartridges. Bottom-up: black, blue, red, yellow. We take with both hands the special handles of the cartridge and remove it by pulling.

HP Laser Jet 1020 Printer

Similar to this model, it is removed in models 1010, 1015, 1018. So how do you remove the cartridge from the printer? Very simple. Open the lid upward. Pull the cartridge towards you by the handle and remove.

HP Photosmart C4280 All-in-One Printer

We turn on the printer. Open the cartridge access door. We are waiting for the carriage to move to the right side and stop. The cartridges are in the carriage. Press lightly on them to release, and pull out.

HP Laser Jet CP1025 Color Printer

How do I remove the cartridge from the printer in this model? It has its own indicator for each color. When the paint runs out, the indicator starts blinking, and when there is no more paint, it will light up. Print stop.

To remove the cartridges, proceed as follows:

  • click on the indicator of the required color;
  • waiting for the printer to issue a cartridge for removal;
  • open the lid;
  • take out the cartridge and close the lid.

We carry out similar steps for the following cartridges.

Removing the cartridge from the Samsung printer

There is nothing difficult in performing the procedure under consideration, because the main thing is to perform all steps carefully and in accordance with the instructions so as not to accidentally touch the fragile internal components of the printing equipment. In addition, each of the types has its own extraction characteristics, which you will learn about further.

Laser printer

Of all the models, Samsung’s laser printers stand out the most, printing only black ink, but doing it much faster than inkjet machines. The peculiarity of their design lies in the fact that the paint is used in powder form, and is also poured into the compartment of the toner cartridge, which in turn forms a single printing system with other components. All this structure is extracted separately, and then other actions are performed. The whole operation looks like this:

  • Turn off the device and unplug it. Wait for internal components to cool down if active printing was in progress.
  • Open the top cover or scanner module if you are using an all-in-one.

Lift the inner cover by grasping the plastic tab.

Remove the toner cartridge. You can only hold on to a specially made handle so as not to damage fragile components with your fingers.

Replace the scanner unit without touching the inside of the scanner unit.

As you can see, there is nothing difficult in completing the task, however, it is necessary to take into account several important factors so that problems do not arise in the future:

  • After removing the toner cartridge from the box, keep it away from light sources and try to immediately put it away in a dark place such as a box. If you can’t pull it out quickly, cover the possible spots of light with an improvised means, for example, a sheet of paper;
  • Pay attention to the green area of ​​the cartridge. You cannot touch it with your hands; for all movements of the structure, a special handle is provided;
  • If toner gets on your clothes, wipe it off with a dry cloth, hot water will only fix the stains on your clothes;
  • Hold the entire structure together (document feeder and control box) when opening the scanner unit.
READ  How to insert a SIM card into a Samsung phone

All other nuances will be associated only with the design features of specific models of printers from the company in question, so in order to avoid problems and breakdowns, before starting the entire operation, read the instructions included in the kit.

How to remove a cartridge from a Samsung m2070 printer

The well-known company Samsung has previously been actively involved in the development of printers of various types. However, later this branch of production passed into the hands of another corporation called HP, after which it became the copyright holder and is responsible for product support. Nowadays such devices can still be found in the homes and offices of users, and almost everyone is faced with the task of removing the cartridge in order to carry out other actions. As part of today’s article, we would like to talk in detail about the production of this procedure using the example of an inkjet and laser device.

Jet printer

As you know, inkjet models are designed for color printing and have several separate cartridges inside. They take up quite little space and are presented in the form of small containers. Each of them is removed in turn from a special connector. Our other article at the following link details this process using an example of a printer from HP. In the case of Samsung, no differences are observed.

As for the subsequent actions, for example, cleaning or replacing the cartridge, then these procedures are also devoted to other materials on our website. with them to learn all the subtleties of tasks and simplify their implementation.

Now you know all about removing ink cartridges from Samsung printers. As you can see, everything is done in literally a few minutes, but do not forget about precautions and accuracy.

Thank the author, share the article on social networks.

To purchase replacement parts, go to where

you purchased the device. It is highly recommended to entrust the replacement of components

authorized service provider, dealer, or organization that has

which the device was purchased. Warranty does not cover

to replace replaceable components at the end of their service life.Such components must be replaced at regular intervals,

to avoid print quality degradation and feed problems

paper. See the table below. The purpose of replacing components is

ensuring optimal operation of the device. Replaceable components,

listed below must be replaced at the end of their service life.

a.Printing speed varies by operating system,

the speed of the computer, the applications used, the method

connections, media type and size and complexity

About 50,000 black and white pages or 12,500

About 50,000 black and white pages or 12,500

About 50,000 black and white pages or 12,500

The device prints in four colors and has four

Toner Cartridge: Yellow (Y), Magenta (M), Cyan (C), and Black

How to Replace Toner Cartridges on Samsung Color Laser Printer

(K). Cartridge has reached estimated life. Device

stops printing. At the same time, a window appears on the computer

Smart Panel program with a message about the need to replace

cartridge (see “Using the Smart Panel Program” on page 77). In this case, the cartridge needs to be replaced. Check Model Number

of the cartridge installed in the device (see the section “Available

Samsung does not recommend using

non-original Samsung cartridges, including remanufactured

refueled or remanufactured. Samsung does not

guarantees high quality printing during use

non-original Samsung cartridges. The device does not have a warranty

applies to repair and maintenance work,

caused by the use of non-original cartridges

Turn off the device and wait a few minutes for it to

Press the latch and open the front cover fully.

Grasp the cartridge by the handles and remove it from the product.

Remove the packaging from the new cartridge. 5. Pull the plastic sheet out of the new toner cartridge.

Grasp the cartridge by both handles and turn it several times out of

side to side to distribute toner evenly.

Samsung Xpress Sl M2070 Replacing The Toner Cartridge

Kyocera M2040Dn Strip When Scanning Through ADF

Replacing an Ink Cartridge in the HP Deskjet 3634 Printer

Samsung Ml 2160 Laser Printer Review

Reseteando Samsung Laser Multifuncional Sl M2070 M2070W

How to Remove Cartridge From Canon Fc Series Copier

Epson Xp 207 Replace Ink Cartridge Reset Errors

How Samsung M2070 Office Equipment Manufacturers And Dealers Cunning

Unknown Toner Pc Kyocera 2040 2540 Installed

Samsung Xpress M2020W Printer Compact & Wireless

Reset Xpress Sl M2070 M2070W M2675N M2875Nd M2885 Fix Firmware Resoftare Cip Key

How To Install Ink Cartridge In Epson Xp 342 Replacing The Cartridge

How to Remove Ink Cartridges from the HP Deskjet 1510 Printer

Narashvat24. an objective opinion on IT technology

Printer Canon Lbp 3010 HP 1005 1006 How To Turn On And Get The Cartridge

How to Remove Cartridges From Carriage Using Epson Stylus Nx130 Example

Christian Bible Story Reading Wall

Chris Drifter Flashback Matt Time Remix

Quality Control 24Heavy Longtime Ft Young Thug

Christina Don’t Say Love Backing Track Demo

Samsung M2070 How to Get Pull Out the Cartridge

Teen Wolf 5X15 Malia Helps Kira Practising

Rammstein Du Riechst So Gut Live De Kuip Rotterdam 2019

Leave And Close The Door Where Has Singer Zhenya Otradnaya Gone

Xxxtentacion Look At Me Official Video

Three Screensavers Seven 2011 3 Left 2 1 Day Until Disney Channel

Kya Banogi Meri Gf Funny Propose Day Song For Boys Bf Gf Funny Funzoa Videos

Black Flag Rising By Jt Music An Assassin S Creed 4 Rap

Saraiki Funny Ustad Student Saraiki Comedy Clips Saraiki Lok

Completa La Letra Del Roast Yourself Challenge Lyna Vlogs Ft Kevsho

Conversation Before Baptism Priest Stanislav Rasputin

Early Bird Episode 51 Series Finale Jana Y Sanem’s Wedding

New Tyga Ft Rick Ross The Game 2019 Biggest Explicit

Lata Darde Muhabbat Vol 52 Jhankar Songs

Westy Watches Hard Play Watches Top Moments From Twitch Hard Play Bombs From Brother

Icd 10 Pcs Example Guideline B3 2A Multiple Procedures

Lirik Lagu Banyu Langit Reggae Version Acakmusik Banyulangit

How to remove the cartridge from the printer

Many of us in the office or at home have an extremely useful and even irreplaceable device. a printer. With it, you can print a large amount of documentation that we need in our studies, work or just for what we love. However, sooner or later the moment comes when you need to figure out how to pull the cartridge out of the printer. This need arises for the following reasons:

  • the coloring matter (ink, powder) has run out;
  • there is poor or faint typing of the text;
  • a sheet of paper has jammed and has stopped the operation of the device;
  • stripes, streaks, blots are observed on the printed paper;
  • an error has lit up on the computer monitor or printer display.

Description of the procedure

Removing the cartridge from the printer is not difficult. Difficulties can arise only the first time. Then you will do it with your eyes closed.

First, find the instructions. Often it clearly describes how to remove the cartridge correctly. Many manufacturers use diagrams or even pictures in their instructions that make the user’s life extremely easy. Cheat sheet images are also found on the device body itself: on the back, side or under the top cover.

For most printer models, this procedure is similar, since the position and fixing of the cartridges are almost the same. Therefore, we will give a general description of how to quickly remove this element from the printing device.

We start by plugging the device into the network. Electric shock will not shock you, and power is necessary due to the fact that in many devices, when turned off, the cartridge is securely fixed inside the device and it becomes impossible to pull it out.

We are waiting for a few minutes: the device will boot up and be ready for use. Then we open the top cover. no special tool is needed for this, everything is done even with one hand. Usually there is a special platform or notch on the side or under the lid that you can pull on.

After this action, the unit with the cartridge moves to the middle, the so-called service window. Here it is just and easy to remove. It remains only to understand the fastening system. For most models, the cartridge is removed as follows: lightly press on the front, lower the element down and pull it out of the grooves. In some printers, the cartridge is fixed with special clips. Press the buttons or small protrusions (levers) on the sides and pull towards ourselves.

READ  How to connect Sony headphones to Samsung

If something does not work out, then do not be nervous and do not use force. The result will be the same. the failure of the device. Read the instructions carefully, try to find information on the forums, or ask there a question about your printer and how to safely remove the cartridge.

Did you succeed and notice that the inside of the printer is stained with ink? Take a dry cloth or a piece of unnecessary clean cloth and gently wipe off any dirt.

Precautions

Below is a video on how to remove the cartridge from the HP Deskjet 2050 and Canon LBP 2900 printers.

How to remove a cartridge from a Canon printer

During the operation of the printer, a situation often arises when there is almost no ink in the cartridge, and you need to pull it out in order to refill or replace it with a new one. Basically, this process is not difficult if you can do all the procedures accurately and correctly.

The most important thing is not to rush, do everything as carefully as possible, and not try to put a lot of physical strength into the process, as this can cause something to be accidentally broken.

As a rule, it is not only very clear and written in detail, but it is not uncommon for there to be a photo of the instruction, where the arrows describe how to get it out, remove it, and then how to insert the cartridge into the printer.

Often, even for different brands, this procedure is very similar, since the distribution and fastening of cartridges are almost the same for the device.

First, we need to turn off the power to the printer. After that, you need to wait a little, since it is important that the printer is completely ready and started. Now open the cover of your device.

Often, after such an action, the head moves very easily to the place where the cover needs to be removed.

Wait until the movement of the head is completely stopped and then try to remove the cartridges.

How to remove a cartridge from a Canon printer

On most models, the cartridge is removed by pulling it towards you. At the same time, it is released from the retainer and perfectly removable. At the same time, a characteristic click is heard, which means that the latch no longer holds the cartridge.

If this method does not work, and you do not yet understand how to remove the cartridge from the Canon printer, then do not pull the cartridge too hard, otherwise you will simply break it. Look, maybe there is a special release lever somewhere. If one is found, just move it to another position and you can pull out the cartridge.

In some models, in order to figure out how to remove a cartridge from a Canon printer, you just need to press on it, lightly. After that, a click is heard and then the cartridge is easily removed from the print head.

Certain printer models are designed in such a way that it is easier to remove the entire printhead and then remove the cartridge from it. This should also be remembered if you do not know how to get a cartridge from a Canon printer.

How to open a Canon printer

The main thing is not to rush and do not be nervous when extracting, do not pull anything through force. If something does not want to detach, this does not mean that the element needs to be pulled out of the printer by force, maybe you are just doing something wrong. Once again, carefully re-read the instructions for the printer.

If not, search the Internet for information about your device, and you will find everything related to removing the cartridge. You can also visit forums specializing in this topic and ask your question there.

In extreme cases, contact the service center, as they will help you with the problem and explain in detail how to correctly remove the cartridge from your printer.

There is enough ink or toner to print a certain number of pages, and then every printer owner is faced with the need to change or refill the cartridge.

Therefore, you need to be able to extract it and install it back. The design of different models of Canon printing equipment is different from each other, but individual units have much in common.

How to remove the cartridge from the Canon mg2440 printer

Probably the easiest way is to get a monochrome laser cartridge, it doesn’t even require a network connection. The main thing here is to get to the very detail. For printers with a paper tray at the bottom, lift the top cover (often made of translucent plastic) that receives the printed pages.

Then open the second one that covers the internal mechanism of the device. This lid has a small notch (it can be located either on the left or on the right), under which your fingertips can easily slip. Some Canon printer models, such as the LBP810, load paper from the top. In such a printer, the cartridge is usually placed behind a cover located on the front of the case.

It is necessary to pull it towards you and fold it down.

The path is now clear and the cartridge can be easily pulled out by the handle. It is also easy to return the part back, but if something does not work out, you should never use force. Possible misalignment, and in order to avoid breakage it is better to make a second attempt.

When the cartridge is brought straight to the guides, it practically falls into its intended place. The final stage: press until a characteristic click, so that the contacts are in place. The location and design of cartridges depends on the technology used in a particular device.

For example, the Canon i-SENSYS LBP7110Cw printer uses a single-pass printing method and includes four separate print engines. Cartridges are located one after the other in a special tray.

Their replacement is carried out as follows: pull towards yourself and lower the cover on the front wall of the device; pull the block out by the handle; get out the cartridge that needs refilling; install full.

Important: do not leave the cover open in the printer, remember that the drum unit may light up.

We take out the cartridge

It is necessary to lift the cover of the scanning device, and then fix it with a special stop. Opening the paper receiving tray, you will see the compartment for the cartridges. When the lid is open, they can move. We must wait for them to stop. In doing so, give up:

  • self-braking;
  • holding the retainer.

Doing so is dangerous to the printer. In addition, you need to act carefully so as not to hurt the head.

Typically, the cartridges are housed within a top-closing retainer box. You need to open it, then, slightly pressing in front, push out the cartridge so that it leaves the compartment. If necessary, remove other cartridges in the same way. By the way, it makes sense to change all the ink blocks at once, and then align the printheads.

In the event that ink is present on the inner parts, wipe them thoroughly. A soft dry cloth will help with this. When removing the cartridge, be careful not to get your hands dirty.

When changing ink, do not touch metal parts in the printing device. In addition, do not leave the printer without cartridges for a long time. This can cause print elements to dry out.

Accordingly, you need to replace cartridges with new ones as quickly as possible.

HP Color LJ Pro M177 Color Printer

On the touch panel of the printer, we find the toner indicator at the top right and click on it. We see the amount of toner for each color. Removal of cartridges occurs in turn of all or only the required color.

For example, press the black indicator on the panel. The message “Moving Black Cartridge Forward” appears on the screen. We open the top cover and remove the cartridge. After closing the lid, select the next color and wait for the printer to move the cartridge to remove.

How to remove the cartridge from the printer

How to remove the cartridge from the printer “Samsung” CLP320?

This is a multicolored flat cartridge laser printer. In order to get them, press down the button on the front cover of the printer. In depth, we note 4 cartridges. Bottom-up: dark, blue, crimson, yellow. With 2 hands, we grasp the hand of the cartridge and remove it by pulling it towards ourselves.

READ  How to set up Internet on a Samsung phone

Working with inkjet device types

Inkjet printers require cartridge replacement if gaps or black streaks appear during printing. How to get a cartridge out of a Samsung printer is a topical issue in a situation when the device jams on paper.

Inkjet technology is designed for a shorter cartridge life, which must be remembered by the user.

When figuring out how to remove a cartridge from a Samsung printer or other equipment, first lift and fix its cover.

At this point, the cartridges can still move by inertia, so wait until they come to a complete stop. Do not hold the latch yourself so as not to damage the equipment.

Most printers have a special cartridge retaining box. The latter can be easily removed by lightly pressing on the front of the block and slightly lowering the part down. After this procedure, you may need to align the printheads. Be careful not to get smeared with ink.

Do not leave the device without a cartridge for a long time, as the parts may dry out. When removing the cartridge from the printer, do not raise the drum shutter or expose the device in direct sunlight.

The procedure should not take more than 2-3 minutes, otherwise the ink may dry out. Therefore, it is recommended to act promptly.

Below is a video with an example of how the procedure takes place:

How to remove the cartridge from the printer

The advances we make every day make our lives easier. Much becomes easier, faster. In this case, there can always be small troubles that require a solution. For example, in the event that the printer runs out of ink, you need to change the cartridge.

The topzapravka.ru website can help with this. However, you must first remove the cartridge from the printer.

Jet printer

As you know, inkjet models are designed for color printing and have several separate cartridges inside. They take up quite little space and are presented in the form of small containers. Each of them is removed in turn from a special connector. Our other article at the following link details this process using an example of a printer from HP. In the case of Samsung, no differences are observed.

Read more: Removing a cartridge from an inkjet printer

As for the subsequent actions, for example, cleaning or replacing the cartridge, then these procedures are also devoted to other materials on our website. with them to learn all the subtleties of tasks and simplify their implementation.

Now you know all about removing ink cartridges from Samsung printers. As you can see, everything is done in literally a few minutes, but do not forget about precautions and accuracy.

We are glad that we were able to help you solve the problem. Describe what did not work for you. Our specialists will try to answer as quickly as possible.

Wait a minute.

Turn on cookies and reload the page.

This process is automatic. Your browser will redirect you to the requested content shortly.

Samsung laser printers. How to set up Wi-Fi Direct

Enter the printer’s IP address into your web browser.

Log in by clicking the Login option in the upper right corner of the display.

note: Default user id / password: admin / sec00000.

Figure: Click “Settings” and select “Network Settings”.

On the left side of the display, under Wireless, select Wi-Fi Direct. and then turn on Wi-Fi Direct.

Figure: Select Wireless Wi-Fi Direct

Device Name: Enter a printer name to search for your printer on the wireless network. The default is the device name. this is the model name of the printer.

IP Address: Enter the IP address of the printer. This IP address is used for Wi-Fi Direct only and is not used for a wired or wireless network. It is recommended to use the default local IP address (192.168.3.1).

Group Owner: Activate this option to assign a Wi-Fi Direct group owner to the printer. Group owner acts like a wireless access point.

Network Password: If your printer is the owner of the group, the network password is required for other mobile devices to connect to your printer. You can set up the network password yourself or leave the specified network password, which is randomly generated by default.

Figure: Wi-Fi Direct Settings

Click Apply. to save changes.

After Wi-Fi Direct is enabled, you need to download a mobile printing application such as Samsung Mobile Print App to print from your smartphone or other mobile device.

Removing the cartridge from the Samsung printer

There is nothing difficult in performing the procedure under consideration, because the main thing is to perform all steps carefully and in accordance with the instructions so as not to accidentally touch the fragile internal components of the printing equipment. In addition, each of the types has its own extraction characteristics, which you will learn about further.

Did this article help you?

Laser printer

Of all the models, Samsung’s laser printers stand out the most, printing only black ink, but doing it much faster than inkjet machines. The peculiarity of their design lies in the fact that the paint is used in powder form, and is also poured into the compartment of the toner cartridge, which in turn forms a single printing system with other components. All this structure is extracted separately, and then other actions are performed. The whole operation looks like this:

  • Turn off the device and unplug it. Wait for internal components to cool down if active printing was in progress.
  • Open the top cover or scanner module if you are using an all-in-one.

Lift the inner cover by grasping the plastic tab.

Remove the toner cartridge. You can only hold on to a specially made handle so as not to damage fragile components with your fingers.

Samsung Xpress M2070 M2070W M2070F M2070FW. Replacing the Toner Cartridge

After installing a new cartridge, close the inner cover.

Replace the scanner unit without touching the inside of the scanner unit.

As you can see, there is nothing difficult in completing the task, however, it is necessary to take into account several important factors so that problems do not arise in the future:

  • After removing the toner cartridge from the box, keep it away from light sources and try to immediately put it away in a dark place such as a box. If you can’t pull it out quickly, cover the possible spots of light with an improvised means, for example, a sheet of paper;
  • Pay attention to the green area of ​​the cartridge. You cannot touch it with your hands; for all movements of the structure, a special handle is provided;
  • If toner gets on your clothes, wipe it off with a dry cloth, hot water will only fix the stains on your clothes;
  • Hold the entire structure together (document feeder and control box) when opening the scanner unit.

All other nuances will be associated only with the design features of specific models of printers from the company in question, so in order to avoid problems and breakdowns, before starting the entire operation, read the instructions included in the kit.

Resetting the page counter on a laser printer

[Brian] was very fond of his Samsung color laser printer until it was time to replace the toner cartridges. A complete set of toner cartridges sells for about the same price as the printer itself, so [Brian] figured he could just refill the toner cartridges he already had. The printer will give a “low toner” warning based on the number of pages and will not print if the number of pages is too high, which negates the savings on the toner refill kit. Fortunately, [Brian] has come up with an extremely easy way to reset the page counter so that it could use third party top-up kits.

All configuration settings and page counts for the printer are stored in the I2C EEPROM. After dumping the data stored in that EEPROM with the Arduino and sniffing whatever gets into the EEPROM with the Bus Pirate, [Brian] was almost on the edge of his wits. Fortunately, intuition intervened. When [Brian] restarted the printer with the Bus Pirate connected, he noticed that initialization took much longer. After printing out the configuration report, he was delighted that all the page counters had been reset.

The final trick that allows [Brian] to reset the page counter and used refilled toner cartridges. it is a simple wire that connects the SDA EEPROM line to ground when loaded. [Brian] used a snap-action switch, but given that this is a once every few months operation, a simple wire will suffice. Watch a demo of [Brian’s] page reset after a break.

BYRGPUB.COM 2021