Webcam recording: instruction for beginners

Today we will analyze the question of how to record from a webcam. At the moment, almost every Internet user has this device. After all, a webcam is built into laptops, tablets and many phones. For ordinary stationary computers, you can purchase a separate “webcam”, which is quite inexpensive. This article will provide Step-by-Step Instructions with a detailed explanation of each step. So, below you will learn how to record from a webcam.

Training

The first step for us will be preparation. Here we need to bring all the necessary tools into full operation. And let’s start with the webcam itself. In order for it to work properly, you need to install drivers. In some cases, installation of this GoPro software is NOT required. You can download the drivers on the official websites of the device manufacturer. Sometimes (this happens in most cases) the software is loaded automatically the first time the webcam is connected to the computer. But at the same time, the Internet must be connected to the PC. After installing the drivers, it is recommended to reboot the system. Webcam recording cannot be performed without the appropriate GoPro software. To check for the driver, you need to right-click on the shortcut “My Computer“, select “Properties”, click on “Device Manager”. If there is a question mark next to the name of the webcam, then you need to install the drivers.

Control program

In addition to installing the appropriate drivers, you will need to additionally download the management utilities. Recording from a webcam is done using THESE programs. There are plenty of similar applications. On my own I can recommend the Screen Capture Studio utility. There are many settings and options in this software. The utility allows you to record from a webcam with sound, with various special effects and other additional features. When you turn it on for the first time, the settings wizard will appear, with which you can immediately select the parameters convenient for you. If you did everything right at the preparation stage, then the program will independently determine the webcam.

Start recording

To start recording from your webcam, you need to click on the “Import” tab and select the “Delight” tool. As already mentioned, the source of sound and picture will be detected automatically. Therefore, you do not need to configure anything else. After clicking the “Start Capture” button, the recording will start. I hope you don’t need to explain that an additional microphone is required to create a recording with sound. For him, you also need to separately install drivers and prepare.

Addition

In order to stop recording, you must click on the “End delight” button. After this, GoProsto save the resulting file into a separate file. To do this, click on “Save” and select the parameters of interest. In addition to the resulting recording, you can immediately add some built-in effects. For example, increase brightness, increase contrast, or make it black and white. It is worth noting that you can use any other program to create a webcam recording. As a rule, this process always occurs according to the same princIPle, which is described in the article.

How to record a webcam with iMovie

Imovie. It is more than a simple editor. You can record webcam from iMovie on Mac too. Later you can edit the recorded webcam in iMovie.

Step 1: Download and install iMovie on Mac. Select New Movie from Submit dropdown.

Step 2: Click the down arrow on the iMovie interface. Select the FaceTime HD camera under the camera in the left pane of iMovie.

Step 3: Expand Import to the list on the top toolbar. Then select the iMovie project you are working with.

Step 4: Click record at the bottom to record webcam on Mac with iMovie. You can click Close in the lower right corner to stop webcam recording.

Step 5: Select Projects in the upper left corner to export your iMovie recording project from your webcam.

How to record a webcam with a camera

If you want to record your webcam on your PC, you can use the built-in Camera app. Although the quality recorded from a webcam is not as good as from a special camera. Let’s see how to record a webcam in Windows 10 and earlier in Camera.

Step 1: Open the Start menu to find the camera app. Or you can use the Search bar to find your camera quickly.

Step 2: Find and Click the camera. To switch to Windows webcam recorder.

Step 3: Click the camera again to start webcam recording on Windows computer.

Step 4: Click Stop to end the webcam recording in Windows. You can Get your webcam screen recording into the Camera Roll folder inside the Default Pictures.

How to record webcam and screen at the same time

If you want to create training courses and online tutorials, Using AnyMP4 Screen Recorder It is the most economical choice. You can add annotations and voiceover directly to the recording screen. Built-in trimmer can remove unwanted clIPs before exporting. Then you can save from webcam or share to YouTube in one stop.

• 1. Record a webcam with and audio from the screen in high quality.
• 2. Add rectangle, ellIPse, line, arrow, text and other annotations while recording.
• 3. Trim recorded with custom start and end times.
• 4. Set the output format, folder, codec, quality and other parameters.
• 5. Set hotkeys to open / close webcam and control screen recording.

Step 1: Launch AnyMP4 Screen Recorder after installation. Choose a tape recorder to record your webcam on your computer.

Step 2: Set up the screen capture area. Turn on Sound System and Microphone. Don’t forget to turn on your webcam. To activate the webcam recording function.

Step 3: Press REC to start recording from webcam and screen. You can pause, resume and stop screen recording of your face. When the recording process is over, you can preview and crop it in the preview window. Finally, click discount to export screen from webcam.

How to record from a webcam online

You can also use AnyMP4 Free Online Screen Recorder to record your webcam and desktop. It’s completely free. Although the frame rate is reduced from 60 to 24 frames per second. If you are not too concerned about the quality of the recording. You can do as shown in the following paragraphs.

Step 1: Click Launch Free Recorder and load eGoProgram Launcher as pop-ups show.

Step 2: Draw on the desktop screen to set the capture area. Then turn on the Webcam and Audio options.

Step 3: After cooking, press REC to record webcam and screen online for free.

How to record a webcam using QuickTime Player

Quicktime Player comes preinstalled on most Mac computers. You can also use QuickTime as a free webcam recorder for Mac. Here’s a guide to recording webcam on Mac with QuickTime Player.

Step 1: Launch QuickTime Player on Mac. Select Record New Movie from the Submit dropdown menu.

Step 2: You can see the front camera appear on Mac.

Step 3: Press REC to start and stop only webcam recording on Mac.

Frequently asked questions about webcam recording

Why is my webcam not detected?

Bad drivers or driver conflicts can cause the problem. You can uninstall and reinstall the Built-in Camera to make your webcam discoverable. Alternatively, you can update your driver to fix this problem.

Can I customize the screen size of the webcam capture?

No. The webcam size is NOT adjustable. You can adjust the position of the webcam for recording from the webcam and your computer screen only.

How to Record on Mac from External Camera?

Just connect your external camera to your computer. Once it is recognized, you can use the above webcam recorders to record directly from your Mac webcam. Just set up your webcam source before recording.

How to Record Webcam on Windows and Mac with 5 Tools

You can make films about yourself while sitting in front of your computer. If you add lighting and choose a clean room with no background noise, you can also get high quality from your webcam. All the need to buy professional equIPment. In fact, you can record a webcam on your computer using the built-in camera. Filming yourself with a computer webcam is easy. Just read and get full guides here.

How to record a webcam

• How to record webcam and screen at the same time
• How to record from a webcam online
• How to record a webcam using QuickTime Player
• How to record a webcam with iMovie
• How to record a webcam with a camera
• Frequently asked questions about webcam recording

Conclusion

These are 5 different ways to record a webcam with or without screen. You can choose any of them to record from your webcam on your Windows or Mac computer. Just read and pick one to write your own

Here is a complete list of the top 10 webcam recording software available for Windows 10/8 / 8.1 / 7, Mac OS X and Linux users to capture everything in front of your webcam.

In this article, we will show you how to record a FaceTime call on your IPhone, IPad or Mac. With our guide, you can simply save important conversations.

Want to record your GoToMeeting session? Here in this post, we are going to bring you 3 effective solutions to record GoToMeeting on Windows 10/8/7 and Mac.

How can I convert my GoToMeeting recording to other standard formats for easy playback? Follow the steps to convert G2M to MP4 MOV, WMV, AVI, etc. right now

Auto upload photos and

By connecting the camera to your Mac using Wi-Fi, you can also import a photo recorded on the camera. Start Finder and click [Applications], then double-click [Wireless Auto Import]. Import and take photos using a Wi-Fi connection. Before Implementation To use Wi-Fi connection, you need to register the access point with the camera in advance. For details, refer to the instruction manual supplied with the camera.

Modern software for organizing online surveillance

To gain access to the archive of recordings from surveillance cameras, as well as to view in real time on a computer, you must:. You can download the settings file in the site section for your home. Step 2. import the settings file. Step 3. View from live cameras. The device section on the left side of the program should display the device that matches your home.

Imovie for Mac: Record Directly to iMovie

Save photos from your mobile device, camera or memory card to your Google Photos library. If you try to add a file of type not listed here, it may NOT work with Google Photos. If you want to save photos from your phone, camera or memory card using a computer, use one of the following methods:. You may already have the Startup Sync app for Google Drive installed. If you have the Google Photos Downloader installed: You can uninstall the Google Photos Downloader after installing the Startup Sync app. They will be loaded into the album where you dragged them.

All-Audio.Pro. How to record from a WEB-camera to a computer

Effects creation. Creation of presentations. Working in Adobe Premiere. Delight. This is a transfer of footage from a miniDV camera to a computer. This name is not entirely accurate, since it is just copying from the camera without any changes. But this very term is used in all programs that we will use.

Don’t be confused by the USB output on your camera. It serves to dump photos recorded on a memory card onto a computer, and is copied using IEEE. IEEE FireWire, i-Link is a high-speed serial bus for exchanging digital information between a computer and other electronic devices.

Main application. Copying from miniDV cameras to files on your computer is a delight. The resulting files with the AVI extension in DV format can be used in any editing program or converted to the desired format. Actually, there is nothing difficult about capturing comments. Surely, if you have a not very old computer, the motherboard has the aforementioned IEEE controller, and therefore the corresponding input output.

In this case, the only thing you need to do is purchase a special cable:. When buying, be sure to tell what you need the cable for. The price can vary depending on the length of the cable and is about a couple of dollars. It is possible that the cable was included with your camera equIPment.

Sometimes it comes with the correct cable. The controller is inserted into the PCI slot of the computer. This IEEE card provides two large 6-pin ports and one small 4-pin.

Notice the cable in the picture above: it has a large 6-pin connector on one side and on the other. Small 4 pin. If you already have IEEE built into your motherboard, then most likely it will be large, and small on the camera.

Although you need to check for your specific case. When connecting the controller, no drivers are required, Windows XP and above will determine and connect everything by itself.

In the “Network Connections” folder you will have a new connection. When connecting a camera, the system or itself will detect a new device, the camera must be turned on and stand in Play mode. Or it will ask for a driver for a new device. Use the installation disc from your camera. Often there are capture programs on such a disk, you can install them, but I do not advise you, they are primitive and will only clog your system.

You can do without them. By editing. You can again transfer it to a miniDV cassette, that is, the process of transferring files goes in both directions: from camera to computer, and from computer to camera.

Some people prefer to store valuable on cassettes. So, your vamera is connected to the computer and is in Play mode. The cassette is rewound. Everything is ready for capture

The capture time is equal to the duration of the recording on the tape, that is, copying is in real time. If the duration is removed for 2 hours, then the same amount of delight will go.

Please note that in DV format Takes up a lot of GoPro disk space, 1 hour. Approximately GB, so there should be enough space on your computer’s hard drive. Now in the programs with which you can capture. Almost all editing programs have a capture function. Look in the functions of THESE programs Capture from device. Capture or Capture. After that, you can start delighting, that is, merging onto the computer. I cannot but mention the best capture program in my opinion. Scenalyzer.

Having tried to work with this program, you won’t want the second one. Editing rules Computer for editing Programs for converting The emergence of cinematography. Sounds and music Collage frames Futazhi transitions Programs. A subscrIPtion form to receive lessons and useful materials on working with

Popular articles Editing tools Working with formats Converting Editing basics Choosing a cameragraphy rules Posting on YouTube What is footage Create congratulations. Latest articles Online photo editing Logo creation Universal converter Frame composition while shooting How to download from any site Online cropping Checking images for uniqueness online. Capture from miniDV camera to computer. SubscrIPtion form.

Your name. Your email:. Confidentiality guaranteed.

How to transfer from camera to PC?

Register Login. Mail replies. Questions. Leaders How much does a good photographer cost? Category leaders Anton Vladimirovich Artificial Intelligence.

Wait until the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Go to search results

Capture from camera.

To edit, create films and transfer to DVD from cassette cameras, it is necessary to rewrite the materials on the cassette to the hard disk of your computer, or in other words, to delight. Sometimes this operation is also called digitization. Cassette cameras come in more modern digital and ancient analog. Capturing from cassette cameras is carried out using a computer with the introduction of Special programs for capturing or using the capture modules included in the universal editors. The actual process of capturing from analog and digital cameras does not differ in any way. The differences are in connecting cameras to a computer. over, I strongly recommend using the FireWire interface and then there will be fewer problems. Motherboards Some computers have built-in FireWire ports.

How to record with a WEB camera

Let’s consider all the methods. from using built-in programs to separate specialized software.

Using third-party software

There are many programs for screen recording and WEB-cameras. Next, the most popular.

Without programs

Without installing additional programs and using the software built into Windows, users will be able to remove only through the software installed along with the drivers to the connected webcam. However, this method is not suitable for everyone:

• First, not all webcams have proprietary recording applications;
• Secondly, webcam laptops do not have their own programs.

Windows 10

Modern Windows 10 has a dedicated built-in webcam control program. It’s very easy to use it:

• Open the Start menu.
• In the list of installed applications we find “Camera”.
• In the program menu, on the right side, select the “”.
• Click on the “” icon again to start recording.

While filming, users can Pause the recording at any time, and the finished material can be viewed or transferred to another device. Despite the fact that the program does not have a wide variety of functions in its arsenal, it copes perfectly with its main purpose. taking photos from the webcam.

Smrecorder

Another interesting program that, unfortunately, does not allow you to apply effects. But it has additional features (for example, a converter and its own player).

Using the tool is not difficult at all:

• Launch the program and in the main window, click on the first button “New entry”.
• A window with settings will appear on the screen. Here in the “General” tab specify the type of capture (camera), and audio input (camera and microphone), duration and location of its saving on the computer. Having configured all the necessary parameters, click on “OK”.
• From this moment, recording will begin. You can pause it using the Ctrl P key combination, and completely interrupt it by right-clicking on a special icon.

All Saved can be found through the path that was specified in the settings

Download SMRecorder program from software. Portal

Online services

Some users do not want to download any additional software to their computer. Especially for them, various online services were developed, which only need access to a webcam to work

List of Most Popular Resources:

• ClIPchamp. One of the highest quality and most convenient online recording services with simple and straightforward elements to manage the Key site functions. The main advantage of this service is that the created project can be instantly sent to the Desired Cloud service or social network. True, the recording time is very limited. the user is given only 5 minutes to shoot.
• Cam-Recorder. Another service that does not require downloading a program to a PC. All functionality is accessible on a convenient website, working with Which is unlikely to bring any difficulties.
• Online Recorder. One of the best sites to record from a camera website with no length limit. Developers promising their users complete data security when using the service’s capabilities.

Windows 7

There is no built-in software for working with web-site cameras in the “7”. We will have to resort to the functionality of third-party GoPro software, downloaded from the Internet.

Installation

The Montage program is fully compatible with Windows XP, Vista, 7, 8, 10, and at the same time weighs significantly less than analogues. The entire software installation process is accompanied by prompts, so at this stage difficulties should not arise.

After installing and running the program:

• Open Montage from the shortcut on the desktop.
• In the main menu, click on “Webcam”.
• We turn on the device. If several cameras are connected to the computer, select the one you need in the list that appears. Shooting device. If there are several cameras, then in the first paragraph you should find the desired.
• Specify the sound recording device (microphone) and select the frame size. Also, before starting work, you can adjust the display of the picture: increase or decrease the brightness, saturation, adjust the hue, sharpness, white balance, etc.
• After editing the shooting parameters, click on the “Start recording” button. The screen will broadcast an image from the webcam, start recording online.
• To end shooting, click on the “Stop recording” button, and then. “Add to project”. When saving material, it is better to create a separate folder.

After saving, the main working window will open with the following tabs:

• Adding materials, titles, screensavers and footages;
• Editing;
• Selection of transitions;
• Replacing sound or adding background music;
• Saving the resulting clIP.

Using all the features of the program, the user can efficiently edit the footage. In this he will be helped by a large number of tools that can significantly improve the quality of the wallpaper.

Download the installation program from the software portal

With built-in software

Explore all options for the most popular version of Windows.

Add music

You can not only shoot on a webcam, but also make a music out of it. To do this, go to the Related section. Choose a suitable composition. strangers or record your own voiceovers from the microphone. Click the button “Loudness and Effects”, to adjust sound settings and add fade in and fade out.

Set anti-aliasing animation

In chapter “Transitions” you can choose the appropriate type of animation for smoothing jumps at the junction of the clIPs. You will have access to 3D, gradient and double transitions. You can set the same animation at all seams or let the program add it randomly. Optionally, you can add a watermark to

Improve recording

Now the captured webcam should be added to the project. You can edit the entry by clicking on the pencil icon. Select the recording layer. In this section, you can stretch, return, crop and use the option “Chromakey” to replace the background.

Take off

In the “Slide” menu, select the option “Recording from a webcam”. A new working window will open. First, turn on the camera. Select and audio device, adjust resolution. You will see which area falls into the frame. Adjust the position of the device so that the picture looks harmonious and start recording from the WEB-camera.

You can record material with or without sound. In the first case, you should specify the audio recording device (external microphone or built into a laptop), in the second, select the item in the drop-down list “Without sound”.

Install the program

Download the editor installation file from our website. Open the distribution folder, start the installation and follow the wizard’s prompts. Make sure that you have confirmed the creation of the shortcut on the desktop. this will allow you to launch the program faster. Check if the webcam is connected to your computer, or if you have a laptop, make sure it works. Then you can start recording.

How to take a quality webcam and edit it?

Do you want to record a for a blog or an original greeting on a webcam? This can be done using the built-in function of Windows 10. However, It does not allow you to fully edit the footage. Third party apps like Viber or Skype only record calls. If you want to shoot, enhance and creatively handle your clIPs, SHOW is the best solution. From the article you will learn how to record from a WEB-camera to a computer, as well as arrange a in our program.

How to shoot from a WEB-camera in a SHOW

SHOW is a convenient and multifunctional editor in Russian, which works on any version of Windows 7, 8, 10, XP, Vista. It will not be difficult for even novice users to find the right tool and quickly figure out how to use it. In the program, you can not only shoot with the built-in or connected camera, but also:

• Trim boring pieces
• Glue multIPle rollers together,
• Add titles and screensavers,
• Apply interesting effects,
• Set smooth transitions between clIPs,
• Change the background using the “Chromakey” option.

To record on a webcam, you must do the following:

Add splash screen

Go to section “Titles”. There is a catalog of simple, universal, children’s and themed screensavers with animation. Choose the appropriate one and add text. By going to the editing section, you can change the background in the titles, apply photo filters and other settings.

Apply effects

Recorded can be transformed using various effects. You can find them in the tab of the same name. The editor offers sections with motion effects, 3D, natural, complex. Just select the animation you like and apply to the slide. In the player, you can preview how this or that effect will look.

How to install a WEB-camera?

You promised your relatives a long time ago to make a communications call; for example Skype or Viber, instead of texting in Odnoklassniki. And finally, you bought a WEB-camera, brought it home, maybe even connected it to a computer, but it doesn’t work. And in general, how to install the WEB-camera correctly and on the first try? About this in order.

Connect the camera

WEB cameras are connected via USB.

WEB-camera is connected via USB interface

For example, connect a Genius FaceCam 1005 webcam. Find the required connector on the case of the system unit, it can be on the front panel and on the back or on the end faces of the laptop and plug the camera cord into it.

Let’s check maybe? Is everything already working? To do this, go, for example, to Skype, if it is installed. If you have NOT used this program yet, see: how to install Skype.

If Skype is already installed, you need to go to the “Tools” menu and after “Settings”.

We select the item “Settings” and lo and behold, our WEB-camera already shows the image.

As you can see, our camera is installed perfectly

This means that it is already working and you can freely call friends and acquaintances.

But, if your camera is not visible in the list of Skype cameras, most likely the reason is related to the lack of a driver.

The sequence of installing a WEB-camera on a computer

In fact, there are more words here than deeds. To install a WEB-camera, you need to take two steps:

• Physically connect the camera to the computer;
• (Often) Install a camera driver (program) that will allow the computer to recognize it as a device.

How to install the driver on a WEB-camera?

The delivery set, as in our case, always includes a disk with drivers for the WEB-camera. Insert the disc into the drive.

Usually, there is always some proprietary program for working with the camera on the disk, but we still need a driver. Usually it is called “Driver” or “Drivers” or “Camera Name Drivers”. In our case, it was named Genius Utility.

Disk menu with drivers for WEB-camera

Select and Install as a regular program.

The camera driver is installed like any other program

If the camera did not work before, now it will work for sure.

By the way, as I said on the disk there is a program for working with the camera, here you can even curl up at the interlocutor or add yourself unusual effects, Turning, for example, into a fairytale hero :).

Crazytalk Cam Suit PRO allows you to add different effects to the image Here, for example # 128578;

The question of how to install a WEB-camera can be considered closed. Now you have set up the camera Not only yourself, but you can also help your friends in this!

We write from the webcam

Good day, Dear Readers!

In this article, we will talk about how to record from a webcam.

For example, you want to send a letter to someone or record some kind of appeal and publish it on the Web on the same YouTube (by the way, here is an article on how to download from YouTube).

The quality of the still leaves much to be desired and not everyone has good cameras that record in high quality. In such cases, it is quite possible to get by with recording from a webcam.

I am often approached by users who still have the Windows XP operating system with requests that it is still too early to “discount” this operating system. Therefore, now I will try to show everything using the example of two operating systems. Windows XP and Windows 7.

So, Windows XP has a pretty handy program to work with. This is Windows Movie Maker. Although it is considered primitive, in our case this program will be a very suitable solution. over, it is NOT required to install a separate software.

Launch Windows Movie Maker and go “File”. “Burn”. Next, we select our webcam. It’s simple.

Now let’s try to record from a webcam in Windows 7. I tried to remember. in some OS, or in Win7 or Windows Vista, there was also a built-in Movie Maker Live program, but in my version of Win7 I never found it. Maybe someone in the comments will tell you what system this program was on? By the way, whoever DOES NOT know how to reinstall the system, you can see my

Well, since I did NOT find it, I had to resort to a third-party program, namely VirtualDub. The program is great and can do a lot, from cutting and gluing. Finishing with overlaying various filters and delight. Well, and of course, he writes from the webcam. You can download the program here. Within the framework of this article, we are interested in, for now, the last point. However, I cannot but name its merits:

• Cuts and glues; (How to cut a song read here, and how to cut a song from a I wrote here)
• Re-encodes and converts various file formats;
• It is possible to work with MultIPle audio tracks;
• Works with formats such as.Avi.Dat.Mpeg.Mpg.Divx.

How to record from a webcam?

Launch VirtualDub and click “File”. “CaptureAVI”.

As you can see, the appearance of the window has changed and you can see the image that the webcam captures. If there is, then we need to tell the program our webcam. Click “Device” to the right of the “File” menu and select the model of our camera (in my case, it is Pleomax PWC 4200).

Now we can specify the path in which our files will be saved by default. We go “File”. “SetCapturefile”. Next, specify the path.

Recording from a webcam is very simple, just press the F5 key on your keyboard and the recording will begin. To stop it, press the Esc key.

In my opinion, VirtualDub has proven itself only on the positive side. Being a free program. And I think that I will write about it more than once in future articles. In order not to miss them, we subscribe to updates.

Well, if you want to more seriously master the editing on a computer, I can recommend you the course of my good friend. Andrei Wilke. Editing Basics in 115 minutes. The course is very high quality, I got acquainted with it myself before I started to get goods.

Well, today you have learned how to record from a webcam. Did you succeed? We ask questions and express ourselves in the comments.

Yes, and in addition to this article, I wrote a sequel that addresses Potential Issues with VirtualDub.

STUDIO-LEVEL CONTROLS

Numerous controls let you do layout, work with transition effects, and customize the display of materials as you wish.

LEARN MORE

CREATE vertical view for mobile devices

9:16 vertical mode is optimized for recording content that can be conveniently viewed on mobile devices and shared on social networks.

Live TEXT overlay

Now a row can be easily supplemented with text by choosing the most suitable option from a variety of font styles, colors and predefined background settings.

LEARN MORE

RECORD FROM MULTIPLE SOURCES

The software allows you to quickly edit Scenes from recordings made with two webcams, as well as those shot in application windows or directly on the desktop, and quickly switch between them in picture-in-picture or split-screen modes (the number of recording sources when this can reach six).

Live Stream

Logitech Capture Software can be added as a recording source to any streaming platform, YouTube, Live, or Twitch, using XSplit or Open Broadcaster Software (OBS). 1

LIGHT, CAMERA, SHOOTING

Logitech Capture App makes creating content with your webcam simple, fast and incredibly easy.

VERTICAL SHOOTING

9:16 recording is the best way to create portrait content for viewing on mobile phones.

LEARN MORE

CAMERA SETUP

Logitech Capture Software lets you not only adjust webcam settings, but also save up to six presets.

LEARN MORE

RECORD FROM MULTIPLE SOURCES

The software allows you to quickly edit Scenes from recordings made with two webcams, as well as those shot in application windows or directly on the desktop.

READ MORE