Yi Action Camera for Xiaomi smartphone

quickly, turn, camera, iphone

Connecting Action Camera starts with turning on gadgets and configuring phone settings.

  • Turn on the device by pressing the large button next to the lens. She is responsible for turning on / off the camera. To quickly find it, you can see the instructions.
  • Press the button on the right side (in the instructions it is indicated as the Wi-Fi On / Off button) until the indicator light comes on. This is a wi-fi module to which the mobile device will be connected.
  • Download from Google Play for Android gadgets or AppStore for iOS devices YI Action Cam app.
  • Connect your smartphone to the camera’s Wi-Fi network, which will look like YDXJ-XXXXXXXXX. The password is specified in the Xiaomi camera manual.
  • Connect your phone to this network by syncing your gadgets.
  • Turn on the downloaded application and select the required device.
  • Click on the required model and wait for the synchronization process.

Important: Updates will be received for this application. The software itself will signal the presence of drivers and offer to install them.

How to connect Action Camera to your phone

Action cameras work with a similar algorithm. But each manufacturer has its own differences, which need to be told.

  • for correct operation, you need to download special applications from the manufacturer;
  • if the action camera does not connect to the phone, you should double-check the stability of the connection and the version of the installed software.

Instructions on how to connect Action Camera to a phone, using the example of 3 popular manufacturers

Action cameras are some of the most purchased gadgets for extreme photography. They are compact and at the same time can work in any conditions: from a simple walk around the city to mountain climbing or a long swim. To control the device remotely, it is synchronized with a smartphone. How to properly connect an action camera, what applications to use for phones with Android and iOS. in the material below.

Action Camera GoPro

To work with devices of this brand, you should download the GoProApp app. It can be used to control the camera remotely.

To start connecting a GoPro camera and a smartphone, you need to do the following:

  • Turn on Wi-fi on devices.
  • Enable shooting mode.
  • Select a Wi-fi network. Its name repeats the serial number.
  • Launch application on mobile.
  • Select a camera (the network name will correspond to the serial number of the device).
  • Enter the password that is printed on the serial number sticker.
  • Go to the app and work with the camera through the GoProApp.

Why connect Action Camera to your phone

This will allow control directly from the phone. The smartphone will replace the external monitor and viewfinder (if the device does not have one), so that you can see the entire frame on the screen of the mobile.

With this connection, you can transfer files “over the air”, which simplifies work in those conditions where it is impossible to quickly send data by other means.

Action Camera Sony

The connection mechanism of the action camera depends on the device model and the technologies supported by the mobile phone. Sony gadgets work via WI-FI and NFC. To find out what a particular device works with, you should look at its instructions.

Important: Before connecting the camera to a smartphone, you need to install the PlayMemories Mobile app, as the devices will connect through it.

When connected via NFC, gadgets connect automatically.

NFC connection algorithm:

  • Turn on Wi-Fi on the camera and select one of the shooting modes.
  • Enable NFC on Smartphone.
  • Attach gadgets to each other.

When connecting via Wi-Fi, the algorithm is as follows:

  • turn on Wi-fi on the camera and select any shooting mode;
  • launch PlayMemories on mobile;
  • select a camera (network name. its serial number);
  • enter the password that is printed on the sticker with the serial number;
  • go to the application and start working with the camera.

Apps from Play Market to synchronize Action Camera and smartphone

What applications should owners of other popular brands use, such as SJ, Sigma, Delta, etc.? In this case, you can use third-party applications.

Universal software is listed in the table:

Mobile connection allows you to view, edit and share video even when you are at a distance from the camera. The main thing is to adhere to the instructions from the manufacturer, and then Connect between gadgets will pass quickly and without problems.

Silent mode

It is enough to lower the volume on the device to zero or switch the phone to silent mode for the shutter sound to disappear. The disadvantage of this method is that you have to do some manipulations with sound every time before taking a photo. To get rid of the shutter sound completely, use the second method.

How to set up your iPhone camera

Apple phones and tablets have always had a great camera to take fantastic pictures. On older models of devices, photos may not be quite clear by modern standards, but the ability to properly configure the camera, enable or disable functions can save the situation and greatly improve the quality of the photo.

What is HDR mode in iPhone and how to turn it on

HDR mode allows you to increase the range of colors available to the camera when shooting. You can see the difference between a regular shot and a shot taken in HDR mode in the example below.

You can activate the mode in the “Camera” application itself. In the top bar, click on the HDR button and wait for the mode to activate.

How To Open The iPhone Camera In One Second

But turning on the mode does not guarantee that the picture will be better, in some conditions this is not the case, therefore it is recommended to save not only the photo in HDR mode, but also without it. In order not to photograph everything twice, you can follow these steps:

Interval setting

The interval parameters are set in order to change the frequency between the creation of a new snapshot. For example, you can set three seconds, so that during automatic shooting, photos were created every three seconds. You can set the interval in the “Camera” application itself by clicking on the clock-shaped icon and selecting the desired time parameter.

How to turn flash on and off

The flash has three modes: automatic, manual and one in which it is disabled. The first allows the phone to decide on its own whether to turn on the flash or not. In the second option, the flash will be used in any case, and in the third, vice versa. By clicking on the lightning in the “Camera” application, you can select one of the above-described operating modes.

How to use manual exposure

In addition to autofocusing the camera, you can use bulb exposure to sharpen your shots. Press and hold your finger on the center area for focusing. At the same time, you can increase or decrease the brightness by moving your finger up or down, respectively.

How to set up camera on iPhone, iPad, iPod touch

This section will take you through the settings you can change on the camera and the features to help you improve the quality of your shooting.

How to make a quality video

Going to the “Photo and Camera” section in the device settings, you can select the resolution in which the videos will be recorded, as well as the number of frames per second. The higher the resolution, the better the shooting quality.

Photo mode

Photo is the default mode that is selected when you open the Camera program. It is used to take regular photos and Live Photos that come to life when touched.

The camera automatically adjusts the Focus of the image and adjusts the exposure for the selected subject. This way, the photos are well-lit right from the start.

You can change the Focus and exposure of the camera for a selected area of ​​the frame. Before taking a photo, touch the area on the screen for which you want to adjust the settings. Then, if you want to leave Focus and exposure at the same point, press and hold the screen until the message “Locking the exposure / focus” appears.

Press and hold the shutter button to start burst shooting and release it to end.

If you have an iPhone 11 or iPhone 11 Pro, you can use the QuickTake function to easily capture video in photo mode.

How to turn on the front camera on iPhone?

So, a guide to working with smartphones and tablets based on iOs:

  • Find a gray icon with a camera in the middle in the main menu and activate it. If you are wondering how to turn on the front camera on iPhone quickly, we recommend using the additional function. In cases where you urgently need to turn on the camera, just swipe to the left on the lock screen.
  • In the screen that appears, there is an icon with two arrows (lower right corner), click on it if you want to take a selfie.
  • At the very bottom there is a round white button, and above it is a horizontal list of all available shooting modes. To take a standard photo, set the photo mode and click on the round button.
  • For movie shooting, set to v

Well, that’s all. If you wish, you can edit the resulting photos at your discretion in the “Settings” tab.

Learn how to use Portrait, Panorama, Slow motion and other camera modes on your device.

Choosing the Right Mode for Shooting

A variety of camera modes, available directly on iPhone, iPad and iPod touch, help you get the perfect shot for your photos and videos. Swipe left or right to switch between modes. The following modes are available: Photo, Video, Time Lapse, Slow Motion, Square, Portrait and Panorama.

Make sure you have the latest version of iOS installed before getting started.

How to turn on the front camera on your phone?

When it comes to video calling, usually the front camera turns on automatically. This is especially true for laptops. But sometimes on tablets and smartphones you still have to do it manually.

READ  Connecting An IP Camera To A Video Recorder

Let’s say you are chatting with a friend via WhatsApp or Skype, but the other person does not see you or instead of your face sees a completely different image, that is, the main camera is on. How do you turn on the front camera then? You need to find the icon representing the camera and click on it. Usually after this there is a change of camera.

If you intend to take a photo of yourself and are wondering how to turn on the front camera on an “Android” smartphone, the approximate procedure is as follows:

  • activate (unlock) the smartphone screen;
  • find the icon with the camera on the desktop or in the main menu;
  • By default, on all Android gadgets, the main camera is turned on first. In shooting mode, there should be an icon on the screen in the form of a camera with two arrows that go around it, click on it.

That’s it, you now know how to turn on the front camera. The interface of smartphones and tablets based on “Android” is approximately the same, so this guide is valid for all gadgets.

How to turn on the front camera on iPhone

Now you will not surprise anyone with the presence of a camera, all laptops, tablets and smartphones are equipped with them. Some are capable of taking photographs that are not inferior in quality to professional cameras. The article provides information about the front camera, which is designed to take pictures using the front panel of the gadget.

Portrait mode

Portrait mode, available on iPhone 7 Plus and later, uses a dual camera system to create a depth-of-field effect. Thus, a clear subject is obtained against a blurred background. If you own an iPhone X or later, you can also take Portrait mode selfies with the TrueDepth camera on the front.

Open the Camera app and select Portrait mode. If the program advises to move further from the subject, do so. When the Depth Effect field turns yellow, take a photo.

Photos captured in Portrait mode on iPhone 8 Plus and later can now be enhanced with studio-quality lighting effects. After shooting, press “Edit” and choose one of the effects: “Studio Light”, “Contour Light”, “Stage Light”, “Stage Light. Mono” or “High Key. B / W”

On iPhone XR, Scene Light, Scene Light. Mono, and High Key. B / W are not supported by the rear camera.

What is a front camera and why is it needed?

There are two types of cameras: main and front. Front camera is called the camera, which is located on the front panel of the gadget. Usually, the front camera is slightly inferior in quality to the main one, for example, if the resolution of the main one is 8 Mp, then the front camera will most likely be about 5 Mp.

The front camera is designed to make video calls, that is, while communicating via Skype, or similar programs, the interlocutors see each other using these cameras. Therefore, before turning on the front camera, it would be good to tidy yourself up.

Taking selfies has become very popular lately. For those who do not know. this is a self-portrait, that is, after you turn on the front camera, pictures of yourself are taken.

Square mode

In the “Square” mode, the frame on the camera screen becomes square. It is a photo format optimized for most social media programs. Thus, the taken photo can be immediately published in your favorite social network.

On iPhone 11 and iPhone 11 Pro, click the arrow. to see other options, including Square mode.

Our experienced team of editors and researchers contributed to this article and reviewed it for accuracy and completeness.

The wikiHow content management team closely monitors the work of the editors to ensure that each article meets our high quality standards.

This article will show you how to use the preinstalled Camera app on iPhone.

How to turn on the front camera on “Android” and iOs gadgets

Now you will not surprise anyone with the presence of a camera, all laptops, tablets and smartphones are equipped with them. Some are capable of taking photographs that are not inferior in quality to professional cameras. The article provides information about the front camera, which is designed to take pictures using the front panel of the gadget.

What is a front camera and why is it needed?

There are two types of cameras: main and front. Front camera is called the camera, which is located on the front panel of the gadget. Usually, the front camera is slightly inferior in quality to the main one, for example, if the resolution of the main one is 8 Mp, then the front camera will most likely be about 5 Mp.

The front camera is designed to make video calls, that is, while communicating via Skype, or similar programs, the interlocutors see each other using these cameras. Therefore, before turning on the front camera, it would be good to tidy yourself up.

Taking selfies has become very popular lately. For those who do not know. this is a self-portrait, that is, after you turn on the front camera, pictures of yourself are taken.

How to turn on the front camera on your phone?

When it comes to video calling, usually the front camera turns on automatically. This is especially true for laptops. But sometimes on tablets and smartphones you still have to do it manually.

Let’s say you are chatting with a friend via WhatsApp or Skype, but the other person does not see you or instead of your face sees a completely different image, that is, the main camera is on. How do you turn on the front camera then? You need to find the icon representing the camera and click on it. Usually after this there is a change of camera.

If you intend to take a photo of yourself and are wondering how to turn on the front camera on an “Android” smartphone, the approximate procedure is as follows:

  • activate (unlock) the smartphone screen;
  • find the icon with the camera on the desktop or in the main menu;
  • By default, on all Android gadgets, the main camera is turned on first. In shooting mode, there should be an icon on the screen in the form of a camera with two arrows that go around it, click on it.

That’s it, you now know how to turn on the front camera. The interface of smartphones and tablets based on “Android” is approximately the same, so this guide is valid for all gadgets.

How to turn on the front camera on iPhone?

So, a guide to working with smartphones and tablets based on iOs:

  • Find a gray icon with a camera in the middle in the main menu and activate it. If you are wondering how to turn on the front camera on iPhone quickly, we recommend using the additional function. In cases where you urgently need to turn on the camera, just swipe to the left on the lock screen.
  • In the screen that appears, there is an icon with two arrows (lower right corner), click on it if you want to take a selfie.
  • At the very bottom there is a round white button, and above it is a horizontal list of all available shooting modes. To take a standard photo, set the photo mode and click on the round button.
  • For video shooting, set the video mode and press the white button again.

Well, that’s all. If you wish, you can edit the resulting photos at your discretion in the “Settings” tab.

Exposure / Focus Lock

An extremely useful feature that every iPhone user should know about. You’ve probably come across a situation where the camera focused on the wrong object that you want. You can fix this by tapping on the desired object. And if you hold your finger for a long time, the application will keep Focus on it.

To adjust the exposure, tap the subject, then, without lifting your finger, swipe up or down to increase or decrease the brightness, respectively.

Activating the “Grid” function

Harmonious composition is the basis of any artistic shot. To create the correct proportions, many photographers include a grid on the iPhone, a tool that allows you to balance the position of objects and the horizon.

  • Move the slider next to “Grid” to the active position.
  • Using a smartphone headset as a shutter button

    You can start shooting photos and videos on the iPhone using a standard headset. To do this, connect a wired headset to your smartphone and launch the Camera application. To start taking photos or videos, press any volume button on the headset once. Similarly, you can use the physical volume up and down buttons on the smartphone itself.

    HDR is a must-have tool for capturing high-quality images. It works as follows: when taking a photo, several images with different exposures are created, which are subsequently glued into one photo of excellent quality.

      To activate HDR, open the Camera. At the top of the window, select the HDR button and then Auto or On. In the first case, HDR images will be created in low light conditions, and in the second, the function will always work.

  • However, it is recommended to activate the function of saving originals. in case HDR will only harm your photos. To do this, open the settings and go to the “Camera” section. In the next window, activate the option “Leave original”.
  • Shooting video at 60 frames per second

    By default, iPhone records Full HD video at 30 frames per second. You can improve the quality of shooting by increasing the frequency through the phone parameters to 60. However, this change will also affect the final size of the video.

      To set a new frequency, open the settings and select the “Camera” section.

  • In the next window, select the “Video recording” section. Check the box next to 1080p HD 60fps. Close the preferences window.
  • Using filters in real time

    The standard Camera application can also act as a small photo and video editor. For example, in the process of shooting, you can immediately apply various filters.

    READ  Connecting a rear view camera to the car

      To do this, select in the upper right corner the icon shown in the screenshot below.

  • Filters will be displayed at the bottom of the screen, between which you can switch by swiping to the left or right. After selecting a filter, start a photo or video.
  • Slow motion

    An interesting effect for video can be achieved thanks to Slow-Mo. slow motion mode. This function creates a video recording at a higher frequency than normal video (240 or 120 fps).

      To start this mode, make a few swipes from left to right until you go to the “Slow” tab. Point the camera at the subject and start shooting a video.

    When shooting is complete, open the movie. To edit the beginning and end of the slow motion fragment, tap on the “Edit” button.

    A timeline will appear at the bottom of the window, on which you need to position the sliders at the beginning and end of the slow-motion fragment. To save the changes, select the “Finish” button.

    Slow-motion video is shot at 720p by default. If you plan to view the video on a widescreen screen, you should first increase the resolution through the settings. To do this, open the options and go to the “Camera” section.

    Open the item “Slow motion video”, and then check the box next to the option “1080p, 120 fps”

    Taking a photo while shooting a video

    While recording a video, iPhone allows you to take photos. To do this, start shooting a video. On the left side of the window, you will see a small round button, after clicking on which the smartphone will instantly take a photo.

    How to set up the camera on iPhone 6. How to set up the iPhone camera

    Exposure / Focus Lock

    A desperate feature that every iPhone user should know about. You’ve probably come across a situation where the camera focused on the wrong object that you need. You can fix this by tapping on a suitable object. And if you hold your finger for a long time. the application will keep Focus on it.

    To adjust the exposure, tap on the object, and then, without removing your finger, slide up or down to increase or decrease the brightness, respectively.

    Slow motion

    An interesting effect for video can be achieved thanks to Slow-Mo. slow motion mode. This function creates a video recording with a higher frequency than in an ordinary video (240 or 120 fps).

      To start this mode, make several swipes from left to right until you go to the “Slow” tab. Point the camera at the subject and start shooting a video.

    When shooting is complete, open the movie. To edit the beginning and end of the slow-motion fragment, tap on the “Edit” button.

    A timeline will appear at the bottom of the window, on which you need to place the sliders at the beginning and end of the slow-motion fragment. To save the configurations, select the “Finish” button.

    Slow-motion video is shot at 720p by default. If you plan to view the video on a widescreen screen, you should first increase the resolution through the options. To do this, open the options and go to the “Camera” section.

    Open the item “Slow motion video”, and then check the box next to the parameter “1080p, 120 fps”

    How to make a high quality video

    Going to the “Photo and Camera” section in the device settings, you can choose the resolution in which the videos will be recorded, as well as the number of frames per second. The higher the resolution, the better the shooting quality.

    Taking a photo while shooting a video

    While recording a video, iPhone allows you to create a photo. To do this, start shooting a video. On the left side of the window, you will see a small round key, after pressing which the phone will instantly take a photo.

    Silent mode

    It is enough to reduce the sound on the device to zero or switch the phone to silent mode for the shutter sound to disappear. The disadvantage of this method is that you will have to make shenanigans with sound every time before taking a photo. To get rid of the shutter sound one hundred percent, use the second method.

    Interval setting

    The parameters of the interval are set in order to change the frequency between the creation of the newest snapshot. For example, you can set three seconds, so that during automatic shooting, photos were created every three seconds. You can set the interval in the “Camera” application itself by clicking on the clock-shaped icon and selecting the appropriate time parameter.

    Turn on recording

    To take a photo or turn on a video, press one of the volume buttons on your iPhone. This will either take a photo or start video recording. In normal mode, you will hear the corresponding beep and see the flash if it is on and you are shooting in the dark.

    Of course, to conduct a hidden recording, the phone should be switched to silent mode, and in the settings, turn off the flash, of course, if you do not want everyone around to hear the sound of a triggered camera or see a bright flash that will instantly give out your intentions.

    It’s also worth noting that as soon as you open any other application from the multitasking menu, the recording will stop, but the video file will be saved. Thus, the above shooting capability only works when you are in multitasking mode.

    How to remotely turn on the camera on iPhone

    In order to carry out remote video surveillance via iPhone or iPad, you just need to purchase one of the video surveillance kits. UControl Start. UControl Economy UControl Profi or UControl Business. configure cameras and install the Q-See QT View program on the mobile device.

    Follow the instructions step by step to connect your mobile device to the UControl demo system via the Internet:

    Install a free program for remote access to a video surveillance system from the Apple Store:

    Install the program. When the installation is complete, the Q-See QT View icon will appear among the programs. Click on it to run.2.

    When you start the program for the first time, you will be prompted to send notifications and brief information about its capabilities will be displayed. Click “Allow” and scroll through the information screens, or click “hide” in the upper right corner of the application window. Then click on the button “Let’s go”.

    In the “Add device” window that opens, enter:

    91.219.164.146:80. standard and AHD cameras

    Nickname. the name of the device, set arbitrarily, for example, “yukontrol”

    3.After entering the data, select the “Preview” button at the bottom. Click “OK” on the prompts that appear. Live camera images from the selected system will be displayed on the screen. To view the camera in full screen, double-click on its image. To switch between cameras, swipe left or right on the image, or click on the desired number under the image.To view the video with higher detail, double-click the selected camera to full screen, then shortly click on the image from it and select from the icons that appear. hereinafter referred to as “Ultra High Resolution”. Reverse switching occurs in the same way.

    You can change camera display parameters, configure the system, view archived recordings, save screenshots and video clips, etc. Using this program, you get absolutely all the same opportunities as with direct access to the video surveillance system.

    recorder settings, local settings, browse locally saved files, list of saved devices, on / off. notifications, list of notifications, help;

    the name of the system to which the connection is made (displayed only when the system is online);

    numbers of cameras of the video surveillance system (pressing turns on playback from the selected camera);

    switch to full-screen viewing mode (horizontal mode);

    setting the image parameters of the selected camera (not available for digital cameras of the HD-SDI standard);

    saving a freeze frame from the selected camera (when viewing several cameras simultaneously, freeze frames from each of them are saved);

    selection of the resolution of the displayed video;

    enable / disable local recording to a mobile device from the selected camera;

    viewing the names of cameras of the video surveillance system (pressing turns on playback from the selected camera);

    stop viewing all displayed cameras;

    enable / disable two-way audio communication with the system (you need a microphone and speakers connected to the video surveillance system);

    enable / disable listening to the sound from the selected camera (a microphone connected to the video surveillance system is required);

    enable / disable push notifications, create groups of favorite cameras and start viewing them on one screen (including when using multiple video surveillance systems), activate / deactivate the alarm output of the recorder.

    Surely, many users of Apple gadgets have heard that the latest versions of the iOS mobile operating system began to support multitasking. that is, the running applications in the background mode, even when they are minimized.

    It is thanks to this functionality that we have the opportunity to conduct “hidden shooting” on the iPhone and iPad. We are talking about the ability to record video or take photos even when anything other than the Camera application is displayed on the screen of your iPhone, that is, no one nearby will know that you are currently taking a video or photo.

    Turn on your iPhone’s camera

    First of all, launch the standard Camera application on your iPhone or iPad as you normally would. Depending on your goals, choose the mode of taking a photo or recording a video.

    Minimize the application

    Double-click on the “Home” button to turn on the multitasking mode. all applications running at the moment will appear on the screen.

    To hide the fact that you are currently running the camera, simply flick a couple of applications to the side, for example, to the open in the background the application of maps or browser.

    Enabling Covert Shooting on iPhone

    Xakep # 251. Strengthening VeraCrypt

    Fastlane.tools developer and creator Felix Krause recently warned about how dangerous fake dialog boxes can be for iOS users, just like system prompts for passwords from iCloud, iTunes or GameCenter.

    READ  How to remove an account from an iPhone

    Now Krause has discovered another nasty iOS feature. As it turned out, any application that has access to the device’s camera is capable of taking photos and videos, and this can happen secretly from the user. The researcher explains that this is not a bug, as it is this behavior that allows spy apps like Stealth Cam and Easy Calc. Camera Eye to exist.

    Nevertheless, Krause is seriously worried, because most users do not remember at all what permissions they have given to applications. Many applications request access to the camera immediately after installation, for example, to set an avatar.

    “Most people have no idea about this, they believe that the camera is used only when they work with it and see the LED blinking,” says the specialist Messengers or applications that work with news feeds can easily track the user’s face, take pictures, or transfer the image from the front and main camera of the device to the outside, without the user’s consent. “.

    Krause notes that in the latest version of iOS, applications can also automatically detect the presence of a second person in the frame, activate the toolkit responsible for detecting faces, monitor the user’s mood while working with the application, and so on. As a proof-of-concept, the researcher presented the watch.user application, which takes pictures of the user’s face while he is simply scrolling through the feed.

    The researcher writes that the only and most reliable way to protect against such surveillance is to physically cover the camera lenses with something. He also recommends revoking camera permissions for third-party applications and using only the built-in solution for shooting. Krause advises Apple developers to add a clear LED indication of the camera‘s operation, as well as introduce one-time permissions for applications.

    Open / Disable Camera from Lock Screen on iPhone 12/11 / XR / X / 8/7. the best tips you should know

    To capture precious moments as an image or video, you can open the camera on the iPhone 12/11 / XR / X / 8/7 lock screen directly. Each sword has two blades. Of course, other people can also use the camera and flashlight without permission. How to disable the function to eliminate the risk of unauthorized access and accidental clicks?

    Of course, you can read more about the method to open or disable the camera from the lock screen on iOS 14/13/12.In addition, you can also find tips for using the camera on the iPhone lock screen. Just read the article and find the information you need now.

    Open / Disable Camera from Lock Screen on iPhone

    How to open the camera from the lock screen on iPhone 12/11 / XR / X / 8/7

    When using older iPhone models, you need to swipe left from the lock screen to open the iPhone camera. How to open the camera app or turn on the flashlight from the lock screen of iPhone 12/11 / XR / X / 8/7? Just find out more details by following these steps.

    Step 1Just wake up your iPhone 12/11 / XR / X / 8/7 without locking the screen. Find the camera and flashlight icon at the bottom of your iPhone 12/11 / XR / X / 8/7.

    Step 2Tap the camera icon to open the camera app from the lock screen, or simply swipe left to open the camera. You can also use 3D Touch to access this feature on your iPhone.

    Step 3After that, you can swipe up to return to the lock screen or home screen on your iPhone, or you can also press the Slide button to lock your iPhone X directly.

    How to Disable Camera from Lock Screen on iOS 14/13/12

    If you’ve already upgraded to iOS 14 or later, you can simply turn off the camera from the lock screen on your iPhone using the Screen Time option. When you disable this feature, it will also remove the camera app from the home screen on iPhone 12/11 / XR / X / 8/7.

    Step 1Go to the Settings app on iPhone 12/11 / XR / X / 8/7 and scroll down to find and access the Screen Time option. Enable Screen Time by tapping the Enable Screen Time option.

    Step 2Screen Time has parental control over apps and games. You can click Continue and select This is My iPhone to confirm that the iPhone belongs to you.

    Step 3Scroll down to find the Content and Privacy Restrictions option. On the Content and Privacy Restrictions screen, turn on Content and Privacy Restrictions. Click on the “Allowed Applications” option.

    Step 4After that, you can turn off the “Camera” option to turn it off. After you disable the camera from the lock screen in iOS 14/13/12, your iPhone’s lock screen will remain the same.

    How to delete others on lock screen without screen time

    Is there a way to turn off other options like View Today, Control Center, Siri, Action Center, and other on-screen features? Just learn more about the method to disable features on your iPhone without using screen time as below.

    Step 1Go to the Settings option and select Touch ID & Passcode, which will prompt you to enter your iPhone’s passcode to control other options on the iPhone lock screen. (Touch ID not working?)

    Step 2Scroll down to find the Allow Access When Blocked option. You can turn off other options for these shortcuts with a tap of your finger. But this does not include disabling the camera from the lock screen on iOS 14/13/12.

    How to get into a locked iPhone without a passcode

    From the locked screen, you can only access the camera. If you want to access and use your iPhone normally but forgot your iPhone passcode, you need an iPhone unlocker to enter it.

    Apeaksoft iOS Unlock is a professional iPhone password remover. It can erase all types of passwords from iPhone, iPad and iPod. If you forgot your passcode or iPhone turns off after repeated incorrect entries.

    • Wipe a variety of passwords like 4/6 digit, Face ID, Touch ID, alphanumeric, customized numbers, etc.
    • Remove Apple ID and help you create a new Apple ID to access all the benefits on iPhone.
    • Recover password or erase password from Screen Time Limits.
    • IOS 14 & 12 support for iPhone 12, 11, XS, XR, X, 8, 7, iPad Pro, etc.

    Download for WinDownload for Mac

    Step 1. Download this iOS unlock to your computer for free. Install and run it right away on your computer.

    Step 2. Launch the software and select Wipe Password, Click Start and connect your iPhone to this computer with a USB cable.

    Step 3. Before unlocking, please check the device information and change it if it is wrong, and then click the Start button. This software will then automatically download the firmware package from the Apple server. This process will take some time and you must wait patiently.

    Step 4. When the download is complete, click Unlock and follow the onscreen instructions to enter 0000 in this software. Finally, click Unlock to start erasing password on iPhone.

    After that, your iPhone will restart and you can use your iPhone like new.

    Frequently asked questions about removing and opening the camera from the locked screen on iOS

    Can you access all camera photos from lock screen?

    Not. You can only open the camera and use it to take photos or videos, but you cannot access all the photos you took before. To access all your photos, you need to unlock your iPhone and open the Camera app to view your photos.

    Can’t access camera from iOS 13/14 lock screen?

    If you can make sure you have enabled the camera access feature on your iOS device, then you can tap the camera app on the home screen or swipe left from the lock screen to open the camera in photo mode. Also, for iPhone XS (Max) / XR / 11/11 Pro (Max) users, touch and press the camera app on the locked screen until it wiggles and slide to the left to access it.

    Can I lock the camera on iPhone?

    Besides the screen time restrictions for locking the camera on your iPhone, you can also download the camera lock app, which will require you to set a password to lock the camera app.

    If you need to take full advantage of the iPhone 11 / XS / XR / X / 8/7 camera function, you should know how to open and unplug the camera from the lock screen on iOS 14/13/12 from the article above. over, you can also find out more about the method for disabling other options on your iPhone.