Samsung Adaptive Fast Charging
- the technology is used in the vast majority of Samsung devices;
- technology compatible with Quick Charge 2.0.
Disadvantage. there is some conservatism of the manufacturer regarding the further improvement of this standard.
Initially, Samsung only used Adaptive Fast Charging on its Galaxy series devices. Unlike Quick Charge and other rapidly evolving standards, adaptive charging is fully compatible with the Exynos on-chip system commonly found in devices intended for sale in the global market. Adaptability implies the ability to vary the process for different conditions. As for charging, in this case, its power changes / adjusts. When the battery is heavily discharged, it charges with increased power. As soon as the battery reaches a sufficient level, the power decreases, but not smoothly, but in steps.
There are several charging options available for Samsung devices today. Now it is not only 18 watts, but also 25, and even 45 watts. Support for higher indicators was carried out not in hardware, but at the firmware level.
If a Samsung phone owner intends to use Adaptive Fast Charge for their device, they must additionally purchase a certified cable and adapter. By the way, there are also devices for car and regular fast wireless charging on sale. However, most Samsung smartphones support Quick Charge compatible accessories.
Fast charging standard
USB Power Delivery (USB-PD) technology has become the standard for fast charging. It was developed several years ago to transfer power in larger quantities. The maximum power of USB-PD, as we can see in the table, is up to 100 watts. Consequently, from the USB-PD connector, you can charge not only smartphones, but also some laptops that are equipped with USB-C.
The advantage of the USB-PD standard is that portable chargers that have a USB-C port can serve as a power source for other gadgets, or, conversely, these chargers can take charge for themselves, being powered by energy from third-party devices. USB-PD chargers are capable of transferring energy at high speed, for example, to a smartphone battery. And then, also at the highest speed, charge the laptop.
Different manufacturers use the USB-PD standard in different ways, each has its own pros and cons.
Quick Charge Basics
So, we know how batteries are charged and discharged. But fast charging is different from normal charging, and in order to understand how it works, you have to learn a little about what a battery charge controller is. You will also have to remember from the school physics course that voltage is measured in volts, current is in amperes, and watts are a unit of measure for power, that is, the amount of energy that is consumed per unit of time.
Higher amperage and higher voltage charge the batteries faster. But when it comes to the battery, these parameters are limited.
Smartphone batteries are recharged when an electric current flows through them. But it must be remembered that the battery cannot take on infinitely much current; at peak loads, it breaks down and collapses. This is where you need a device such as a charge controller. This controller protects the battery from dangerous current peaks. It regulates the flow of electricity that goes into and out of the battery. Simply put, controllers regulate the current (in amperes) at which the charging process takes place, measuring both the strength and the voltage. They do not allow critical exceeding the permissible parameters that can damage the battery.
Acceptable / standard values for USB charging are shown in the table below.
|Voltage||Current strength||Max. power|
|USB 1.0||5 in||0.5 A||2.5 watts|
|USB 2.0||5 in||0.5 A||2.5 watts|
|USB 3.0||5 in||0.5 / 0.9 A||4.5 watts|
|USB 3.1 (USB-C USB-PD)||5–20 V||0.5 A / 0.9 A / 1.5 A / 3 A / 5 A||100 watts|
Using Fast Charging on Samsung Phones
No matter what smartphone you use, you will constantly monitor the battery level and regularly connect your mobile device to a power source. Different models of mobile devices take different time to replenish the battery. Fast charging technology helps to reduce it. Today, more and more Android and iOS devices are receiving this feature. From the name of this technology, it follows that, subject to certain rules, the phone can be charged up to 80% in just half an hour.
Some Galaxy S10 phones (S10, S10 Plus and S10e) use a 15W charger (Qualcomm QuickCharge 2.0 technology), Samsung Fast Charge for the Galaxy S10 5G is rated at 25W, and the S20 and Note 10 adapter supports 45W The standard charger, with which most phones are charged, has 10 watts.
How to Activate or Deactivate Fast Charging on Samsung Phone
You can enable or disable the fast charging function in the settings. There are two ways to get into the settings on Samsung phones:
- lower the notification curtain and tap the gear icon, then open the “Settings” section;
- tap on the “Settings” application icon, which is located on the home screen of the phone.
In the settings, open the “Optimization” section, then go to the “Battery” section (the icon in the lower left corner). The next step is to go to “Advanced Settings”. To enter this menu, find three dots in the upper corner on the right side of the screen and click on them. In the “Additional settings” there is an item “Fast charging”. Turn it on by sliding the slider all the way to the right. If fast charging is already on, and you want to turn it off, then put the slider in the extreme left position.
How Standard Charging Works
Let’s remember the main points: every mobile phone is powered by a rechargeable battery, and each battery functions according to more or less the same principle. It consists in the fact that the battery has two electrodes. positive and negative, anode and cathode. The electrodes are immersed in electrolyte. This is a special liquid that is a catalyst for physicochemical processes, during which the movement of electrons from the anode to the cathode occurs. When electrons move, an electric current is generated, which feeds the battery and charges it.
In disposable batteries, which cannot be recharged, the chemical reactions that trigger the flow of electrons only occur once. After that, the batteries become unusable. But in a lithium-ion battery with reusable charging cycles, as used in a smartphone, these reactions are renewable. During the period when the battery is gradually discharged, chemical reactions generate electricity. When the battery is recharged, these reactions, on the contrary, absorb energy.
Why fast charging doesn’t work
Often on the Internet, owners complain that the smartphone has stopped working normally. fast charging has disappeared. When the phone has a “fast charge”, but this function does not turn on or suddenly stops working, you need to find out the cause of the problem. There may be several reasons why the device takes longer to charge than usual:
- use of non-certified accessories. adapter and cable;
- physical malfunction of the phone connector or adapter / cable for connecting power;
- deactivated (in software settings) fast charging function;
- using the phone while charging (screen backlight on, running apps).
What can be done to make the smartphone charge quickly? First of all, check if the corresponding option is enabled in the “Settings” section. Then stop applications running in the background and do not use your phone while it is charging. Purchase and continue to use only manufacturer-approved accessories.
As a conclusion, we can say that Samsung Adaptive Fast Charge technology is an innovation that is very much in demand in modern conditions, which, if used correctly, does not harm a mobile device and allows the phone to be prepared for further work much faster.
Battery percentage on Android built-in system tools (System UI Tuner)
The first method usually works on almost any Android device with up-to-date versions of the system, where there is no charge percentage point in the settings. over, the method works even in cases where the manufacturer has installed its own launcher, which is different from the “pure” android.
The essence of the method is to enable the option “Show battery level as a percentage” in the hidden settings of the System UI Tuner, having previously enabled these same settings. This requires the following steps:
- Open the notification shade so that you can see the settings button (gear).
- Press and hold the gear until it starts to rotate and then release it.
- The settings menu will open with the notification that “System UI Tuner has been added to the settings menu.” Keep in mind that steps 2-3 are not always obtained the first time (you should not let go immediately, as the gear began to rotate, but after about a second or two).
- Now, at the very bottom of the settings menu, open the new item “System UI Tuner”.
- Turn on the “Show battery level percentage” option.
Done, now the percentage of charge will be shown in the status bar on your Android tablet or phone.
How to enable battery percentage in Android
On many Android phones and tablets, the battery status in the status bar is simply displayed as “fullness”, which is not very informative. In this case, there is usually a built-in ability to enable the display of the battery charge as a percentage in the status bar, without third-party applications or widgets, but this function is hidden (except for the latest versions of the system).
In this instruction. how to enable the display of the battery charge as a percentage by the built-in tools of Android 4, 5, 6 and 7 (when writing it was checked on Android 5.1 and 6.0.1), separately. on the latest Android 9 Pie and newer, on Samsung phones Galaxy as well as a simple third-party application that has one single function. toggles the hidden system setting of the phone or tablet, which is responsible for displaying charge percentages. May Help: Battery Drain Fast on Android, How to Find Current Android Battery Capacity.
Note: usually, even without turning on special options, the remaining percentage of the battery charge can be seen if you first pull out the notification shade from the top of the screen, and then the quick action menu (charge numbers will appear next to the battery).
Enabling battery percentage display on pure Android 9
In the latest versions of Android, you can enable the display of the battery percentage in the status bar using a simple setting (if you do not have one, use the methods from the following sections). Steps to enable:
- Go to Settings and click on the item “Battery”.
- Turn on the item “Battery level”.
These are all the necessary actions. the necessary information should immediately appear at the top of the screen of your smartphone.
Battery Percentage on Samsung
Samsung Galaxy phones have a built-in function to turn on the display of battery charge in percent, but it is not in the most obvious location for beginners:
- Go to Settings. Notifications. On the next screen, click on the item “Status bar”.
- Turn on the item “Show charge percentage”.
After that, your Samsung Galaxy will show the percentage of charge next to the battery icon in the upper right corner of the screen, as required.
Using the Battery Percent Enabler app
If for some reason you cannot turn on the System UI Tuner, then you can use the third-party application Battery Percent Enabler (or “Battery with a percentage” in the Russian version), which does not require special permissions or root access, but reliably enables the display of the percentage of the charge batteries (moreover, the same system setting that we changed in the first method just changes).
- Run the application and check the “Battery with percentage”.
- You immediately see that the top line began to display the percentage of the battery (in any case, I had it), but the developer writes that you need to reboot the device (turn it off and on completely).
Done. At the same time, after you changed the setting using the application, you can delete it, the percentage of the charge will not disappear anywhere (but you will have to reinstall it if you need to turn off the display of charging in percentage).
Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)
Question about Demonstration in System Ui Tuner. There it is disabled for me, but in system processes this Demo mode works and cannot be stopped or disabled (the buttons are not clickable). And the battery then eats, for 5 days from this process, 10% of the charge flies away. The phone has all default settings. Moto G4 Play. If anyone knows how to disable it, I will be grateful for the help. thank.
I don’t know the answer. Now I looked at my Moto X Play. there is such a process, but I used 0% of the charge in 3 days (from the moment of full charge)
Hello, I have a Moto-g, I press, hold, (for a long time) does not rotate. What to do?
Now on Google, they write that it works on Moto G3 / G4 From ideas. clear the cache and data of the “settings” application and try again.
Hello, sorry for not being in the subject, but still: tell me how to display the temperature of the battery / processor in the status bar?
Without Root. nothing. And with Root there are different possibilities, like “CputTemp in Status Bar”.
There are many such applications. I use Phone temperature. Shows battery temperature simply and clearly in a line
Explain what does the gear mean to turn? Moto-g Android 5.1. I was holding, not spinning.
In a literal sense, start rotating when you hold it down (the truth may be hard to see under your finger). On Moto X Play it worked exactly in 5.1.1 and 6.0.1
And how to turn off the percentage of battery power, I did not find the whole bodies
So exactly the same as turning on, i.e. everything is the same, but turn off in the System UI Tuner. Provided that you do not have any special firmware, where there is no possibility of turning off.
After disabling the System UI Tuner, the percentage of charge is still not displayed, Android 7.1.1 help to solve the problem
on a Samsung Galaxy tab 2 (Android 4.2.2), this function is turned on differently: you need to go to settings. display. show the percentage of charging and put a tick
My gear does not spin, but in the application it says that it is successful, but the percentage does not show, help (Samsung Galaxy j5 2016)
On Xiaomi Mi 2 Lite it does not work. Fucking bare Android you can’t even change the back buttons
On bare Android 8 and 9 works.
Works on Moto C 4G too (Android 7).
I have a tablet megaphone login 3t, the gear does not spin, I can not set the percentage of charge, how to be.
I have a megaphone login 3t on my tablet, this gear does not spin, how to make it show the percentage of charge on the display.
I have a tablet megaphone login 3t gear does not spin I can not set the percentage of charge, what to do.
It does not work for me!
Android version 5.1
And does not work
What to do.
Thank. Your site has the most complete and detailed answer. After the update, the battery level is no longer displayed. Solution helped me. Settings. Notifications. Status bar.
thanks for the help!
I have a Samsung note 10, so that the battery charge is displayed as a percentage, you need to go through the “status bar” and enable this function. She herself would never have guessed to look there. Here is a clear step-by-step instruction in pictures.
A very intelligible instruction, the whole process of restoring the “visibility” of the battery charge percentage took several seconds. Thank you so much!
On an excellent day, I was looking, I could not find it, but here everything is so simple that not much they posted this function. thanks for the help
Thank you, the battery level now shows as a percentage, Android 7.1, through the system ui tuner did
How to check battery status on iPhone?
Battery Health On iPhone 6 and later, new features are available when you update to iOS 11.3 or later: View the battery status and notify you when you need to replace it. These functions are found in the menu “Settings” “Battery” “Battery status”.
How to turn on the flashlight during a call on iPhone?
How to turn on flash on incoming calls and notifications on iPhone with iOS 5. iOS 12
- Go to Settings and select the General section.
- Scroll down and enter the Accessibility menu.
- Select the Hearing section and activate the Flash alerts switch.
How to Recover iPhone Battery Capacity?
- First of all, you need to completely drain the battery of your iOS device.
- After that, we put the device on charge and charge it up to magical 100%.
- Once your iPhone or iPad is charged to 100%, leave it hanging on the lanyard for another hour (to be sure).
How to turn on charge percentage on iPhone X?
You can view the battery percentage in the status bar on your iPhone, iPad, or iPod touch, or in Control Center. On iPhone X and later, the battery percentage is displayed in Control Center. Just swipe down from the top right corner of the display.
How to properly charge iPhone 11?
It’s better to charge your iPhone or iPad several times a day than to charge it once from zero to full. If possible, keep the charge level in the 40-80% range. You can connect to charging already at 50% discharge, and should be disconnected when the charge does not exceed 90%.
How to make a screen on 11 iPhone?
- Press the side button and the volume up button at the same time.
- Release both buttons quickly.
- After taking a snapshot, a thumbnail will temporarily appear in the lower left corner of the screen. To view the photo, tap on a thumbnail, and swipe left to remove the thumbnail from the screen.
How to enable charging percentages on iPhone 10?
As we know, in the new Apple flagship, unfortunately, there is no way to see the battery charge as a percentage. This is due to the new design of the top of the iPhone X display, which simply has no room to display percentages. In order to find out the percentages, you just need to open the Control Panel.
Why did you remove the percentage of charging
Of course, the main reason why you can’t see the exact charge level now is the lack of free space due to the cutout. However, fans of the apple brand have put forward their own theory. Since Apple has always prioritized user comfort, they could deliberately hide the percentage display.
It’s all about psychology. Even when 49% of the battery charge remains, a person starts to get nervous. suddenly there will not be enough for the rest of the day. In fact, in this state, the smartphone (at medium loads) will work for another six to eight hours. But the discomfort has already appeared. Accordingly, if the digital values are not visible, the person worries less about the battery charge.
How to enable charging percentages on iPhone XR?
The battery, or rather its capacity, is one of the most important factors when choosing a smartphone. The iPhone XR is no exception. Most users are accustomed to keeping track of the charge level as a percentage. clarity makes it possible to better navigate how much more time you can actively use the gadget. But with the release of the tenth episode, everything became much more complicated.
How to put charging percentages on iPhone XR
The answer is simple. no way. Yes, it’s sad, but you cannot enable the display of percentages on the main display. Although all previous models of smartphones from Apple had this feature, with the release of the tenth series, the function disappeared. The reason for this is the transition to frameless devices with a cutout at the top of the screen. Everything is trite. there is no room for interest. It is this cut that most of all causes complaints from users, but they have to endure.
For the iPhone XR, like the entire X-line, the ability to turn on the charge as a percentage has been removed from the settings. But one option remained, let now you have to do extra body movements for this. If you are more comfortable focusing on specific percentages, you need to go to the “Control Center”. The developers left us no other options. This is done in the following way:
- You need to touch the upper right corner of the screen. Where the battery icon is displayed.
- Hold down the button and drag it down. The “Control Center” should open.
- An indicator and percentage of the consumed charge will appear at the top of the display.
Displaying charge as a percentage on iPhone XR
The need to carry out such an action every time causes discomfort for users. But only the first time. then you get used to it. By the way, there is another way to see the percentage charge. To do this, you need to ask the voice assistant Siri: “What is the current battery level?” Smart utility will answer you with a voice message.
As it was before
In previous iPhones, in order for the numbers to always be visible on the home screen, it was necessary to activate the corresponding function in the settings. This was done as follows:
- Go to “Settings”.
- Click on the “Battery” tab.
- We translate the slider “Charge in percent” to the green position.
After that, on older iPhones, the percentages could always be seen on the main information panel.
How to enable charging percentages on Samsung
By purchasing a brand new smartphone, we are forced to customize it to fit our needs and preferences. Since the default settings are not always acceptable. It is important not only to change the desktop, but also to change some of the system parameters. In this article, you will read about how to put charging percentages on your Samsung smartphone.
Saving battery on Samsung
Now that we have set the charging percentages on the smartphone, we can know when we should start conserving battery more carefully. Since its level is reduced to a minimum. A useful utility has been developed for mobile devices of this brand. Samsung Max. You can download it in the Play Market using this link.
- Manage your applications;
- Store data of applications that are installed in the smartphone;
- Check the file system of your mobile phone for viruses and bugs that track your actions;
- Fully controls the charge consumed by applications. For the most demanding applications, you can limit traffic if applicable;
- The user will receive the most accurate graph with the consumption of Internet traffic by applications on Samsung;
- Turn on “Incognito” mode in apps to prevent ad platforms from tracking your actions.
All this and not only you get by installing on your Samsung Max phone.
|You can enable the function of percentage indication, save traffic and limit it both for a smartphone and for a separate application.||The app is not intended for tablets (no horizontal screen orientation).|
|You can set the traffic limit for different periods of time.||It consumes a lot of RAM (up to 200 MB). But their developers promise to eliminate soon.|
Way to set charging percentages on Samsung S7
As we said, different Samsung models may have different ways to change charging settings. For owners of Samsung S7 and S8 mobile phones, the process of displaying the charge level as a percentage is the same.
- Go to phone settings again. To do this, open the quick access menu (swipe the Android shutter);
- Select the gear button;
Immediately after activating this option, at the top of the screen, you will be able to see the battery percentage of your Samsung phone.
Panel with indicators on Samsung smartphones
There are always a few small icons or indicators displayed at the top of our Samsung smartphones. The inclusion of any technology. Wi-Fi, Bluetooth, Data transmission. is accompanied by the appearance of the corresponding icon. It also displays a charge indicator.
Most Android mobile phones have the ability to customize the appearance of this indicator. We can make it so that only the small battery is displayed. Or make it so that the display of the remaining battery power is presented as a percentage.
How to display charging percentages in Samsung
This representation of the remaining battery power does not make it clear how many hours we can still use the device. This is especially important to know when the rate is low. Most users are not yet familiar with the Android system.
We have prepared a simple instruction for them:
Select the settings icon on the main screen;
On the same settings window, you can change how notifications are displayed on Samsung.
After changing these parameters, the window can be closed.
What to do if you don’t receive charging percentage notifications on your Samsung Galaxy S10 lock screen
In the new models of the popular Samsung brand, developers continue to make mistakes. For Galaxy S10, no battery notification appears on the locked screen. They should notify us about receiving letters by E-mail or in social networks. This issue can be resolved with the third-party Always on Edge Lighting application.
It contains a large number of settings related to mobile device notifications. And also backlit. You can also put the display of charge percentages on your Samsung through the program. And turn on the backlight of indicators when receiving notifications.
How to enable charging percentages on Samsung?
Almost all Android smartphones do not use the percentage of charge by default. Why? Apparently, this has something to do with Google’s Android policy (the operating system belongs to the world’s largest search giant). Or maybe it’s something else. In any case, the user needs to independently “set” percentages. How to do it if you have a Samsung smartphone?
By the way, this is how the charging icon without interest looks like:
The manual is suitable for smartphones based on One UI: A10, A30, A50, S10, etc. Open the Settings app
Toggle the “Show Charge Percentage” switch to the “On” position.
The item “Show charge percentage” is disabled. Turn it on by pressing the switch.
We look at the status bar, see the charge level as a percentage and rejoice.
Instructions in case nothing works. Open the settings section, look at the top of the window. here you will see the search bar.
Click on it and indicate the search word “percentage” (indicate without quotes). And the desired menu item is immediately displayed.
It remains only to click on it and enable the function.
Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:
- Subscribe to our YouTube channel.
- Subscribe to our group.
How to enable charging percentages on Samsung phone screen
One of the most important components of a mobile device is the rechargeable battery. It depends on its state how long we can use our phone without connecting it to a charger. Without a doubt, when choosing a smartphone for yourself, you must first of all pay attention to the capacity of the built-in rechargeable battery. When the battery has a higher capacity, less often you have to think about charging.
The ability to display battery percentage is essential for any phone, regardless of model or brand. However, the problem is that on many out-of-the-box devices, this function is often inactive. For example, on Samsung smartphones, the user has to configure it manually. The step-by-step steps may differ from model to model. We will tell you how this is done in more detail.
Manual for phones with TouchWiz shell
Tachwiz firmware is the oldest version of the proprietary shell / launcher created for Samsung smartphones. It appeared back in 2008 and lasted until 2016. TouchWiz interface is installed on such models as Galaxy S3 or J3.
In general, if you have a phone with TouchWiz, then in order to set the charging percentage for Samsung in the same way as in the “Method one”, which is described above, you will need to go to the status bar settings: application “Settings” “Display” ” Status bar”.
By clicking on this item, we enter the menu and put the slider opposite the option “Show charge percentage” to the on position.
Manual for phones with Samsung Experience and One UI shells
Note that until 2018, Samsung’s branded shell was called Samsung Experience (for example, the popular budget phone J7 runs on it). Later models began to appear on One UI. In general, this includes many smartphones of the A-series: A10, A30, A40, A50, A51, A71 and S-series: S8 / S8, S9 / S9 / Note9, S10 / S10, S20 and others.
First, you need to start by opening the Settings app. This can be done by tapping on the corresponding icon on the home screen.
In the “Settings” select the “Notifications” section. Blocking, permission, adding to priority “.
This section contains a set of options. Find among them the “Status bar” and click on this item with the mouse.
A menu will open in which you will see “Show charge percentage”. To activate this option, just slide the slider to the right.
Now, if you look at the top panel of your phone, which is the status bar, you will see that percentage is displayed next to the charge indicator.
If you see only the battery icon on the phone screen (say, Galaxy S9 or S9), then you can enable charging percentages on Samsung like this:
- swipe down on the home screen to open the notification shade;
- on the open notification curtain, find the settings icon. It is drawn in the form of a gear. Tap on this gear;
- Scroll down the settings menu and find the Battery section. It can be located under the “Notifications” section (it all depends on the firmware version that is installed on your Samsung);
- find and select “Show battery level in percent”;
- set the switch next to this item to the “On” position.
As you can see, just a few simple steps, and you were able to put the charging percentages on Samsung.
Battery Checker Apps
If you are more serious about always being aware of the state of the battery of your mobile device, we recommend downloading and installing one of the following applications on your phone:
- Battery HD Pro,
- Nova Battery Tester,
- Power battery,
- GSam Battery Monitor,
- 3C Battery Monitor Widget.
These programs will help you get a complete picture of the degree of battery wear (Nova Battery Tester), show you how many minutes of phone calls, surfing the net and watching videos (Battery HD Pro) the battery will last. Battery Life, for example, will provide detailed data on battery temperature, charge level, capacity and number of cycles. The most comprehensive in terms of diagnosing and fixing battery problems is the Power Battery app. Some of its functions can work in automatic mode. GSam Battery Monitor and 3C Battery Monitor Widget also provide very decent monitoring of the battery condition.
How to Add Battery Percentage % on Galaxy A10/A20/A30/A40/A50/A50s
In general, third-party applications can provide additional capabilities for tracking the battery life of a smartphone. For example, to give an accurate analysis of its condition in the form of graphs and tables. Or display, for example, information about the percentage of charging on the main screen when locked, and much more.
How to put charging percentages on Samsung a51
The Korean packed all his models, including the Samsung a51, with rather large batteries, but unfortunately they don’t have crazy endurance.
If you want to better monitor the battery discharge, you need to enable display of consumption as a percentage in the status bar.
By default, the a51 only shows an icon showing how much charge is left before you need to “top up”.
To set the default percentages you have to scroll through a bunch of menus to get the number and usage statistics.
Fortunately, it’s easy to crank with a simple toggle switch. turn on charge percentages in the status bar.
In order to facilitate access to checking the battery statistics, at the end I will give another useful trick.
How to set the percentage of charge on Samsung a51
Going into the “Settings” menu, you can customize a lot. In our case, we’re going to head to the notification section.
From there, tap the status bar. This menu has a simple toggle slider at the bottom of the list that, when turned on, displays the battery percentage in the Galaxy a51’s status bar.
If you go to the Play Store and download a free app called “Quick Settings”, you can add a shortcut to the battery menu in your quick settings, I, for example, am “shocked” by this, but the Korean himself does not offer it.
After downloading the app, tap the side options at the bottom of the screen, tap Utilities and then Battery.
When the icon is added, open quick settings on your a51, tap the three-dot menu in the upper right corner, select Button Order and drag the battery icon to the desired location.
Once added, this shortcut will open the battery usage graph when you click on it. Have a good day.
8 Comments on “How to put charge percentages on Samsung a51”
Vitannya! At me at a time, if the smartphone is connected to charging and it reaches 100 hectares of repairs, my melody is a ringing tone, so I can’t seem to be able to see it, but it’s not worth mentioning, but it’s not the same for the last day. Chargers and if it reaches 100 per cent, it will turn out to be saved from the battery of charges. The memory was lost after inserting the memory card into the phone without the card, if the phone was on the charger, if the picture got better and better. In principle, it’s not a problem for me at all, and I may sound altogether so I’m not alone, but I have a bedroom in my room and there’s my mother, it’s sensitive and not easy, if you want to see it in the evening. Say whether weasel is really helpful, the memory card has become very clean and the melody of dzvinka has already begun to grate?
Greetings, most likely you have not a standard sound set on the notification, but the ringtone is registered.
Aaa shanovny to Yaroslava, well, that’s why I’m digging around here and I’m trying to do it myself. And from bachit You can know some tricks Giblets and little by little start to work and axis Well, everything is clear. Dyakuyu for the opinion. Good day to you, and now I can feel it like that. I want the nobility to be charged with chi ni. Skilches here Androide Van Love.
Thanks for your help), Samsung Galaxy A 6 is the same principle.
How to properly charge your Samsung Galaxy smartphone
Modern batteries for mobile devices are distinguished by better reliability and performance, so many of their problems, which everyone knows about, have ceased to be relevant. Today we will renew your knowledge in this area so that you know how to properly charge your Samsung Galaxy smartphone.
There is no instruction as it is unnecessary. First, don’t bother with how and when to charge the battery. Just connect your phone or tablet to the power adapter and that’s it. The only thing you need to know is that you should not cover the gadget so that it does not overheat. Excessive heat will negatively affect battery life.
Secondly, do not use a non-original charger. Beware of cheap adapters from unknown manufacturers. You can use high-quality chargers from reputable brands that claim to be compatible with your mobile gadget model. If the smartphone supports fast charging, then the charger should also have this function.
It is no longer necessary to discharge and charge it fully three times in a row after buying a brand new device. Modern self-contained power supplies are devoid of the “memory effect”, so this recommendation is no longer relevant.
Is fast charging harmful for a Samsung smartphone??
The first versions of fast charging technologies did have a negative impact on battery capacity due to the fact that the phone got quite hot during the process. Modern developments are much more efficient than before, thanks to which they charge faster and heat less.
The drop in battery power is now so slight that after several years of use, you won’t even notice a change. So do not be afraid that a few months after using the smartphone battery will become unusable.
Of course, if you still don’t trust these technologies, then disable fast charging if you’re not in a hurry. Luckily, many smartphone manufacturers allow this to be done. If you cannot turn off fast charging in your device, then use a quality power adapter that does not support fast charging. The phone will charge more slowly, but more confidently.
Tips on how to properly charge your Samsung smartphone
Charging the phone every time from 0% to 100%, its battery will last a maximum of 500 cycles, and then lose most of its capacity. So what can you do to maximize your battery life? Here are some tips:
- Charge your phone regularly. Do not let the phone drain completely before shutting down, and do not charge it 100% and keep it that way for a long time.
- Keep the charge in the range of 10-80% and you can extend the life of the battery at least 2 times.
- Don’t leave your phone on a charge overnight. This only overloads the battery.
- Do not overheat the battery too much.
Of course, you shouldn’t get hung up on all this. Don’t worry if your phone runs down to zero and you can’t charge it for a while, or if you fully charge it on a long journey. Even without our recommendations, an autonomous power supply for a mobile device will still serve you for several years.
Can I use wireless charging?
This method of recharging the battery can also overheat the phone and reduce its life. If you find that wireless charging is the reason your device is always warm, then try to avoid using it.
Modern induction coils tend to get hot, there is nothing strange about this.
How to properly charge a new smartphone battery?
Many “experts” will advise that a new battery should be charged in the off state of the device for about a day, while others argue that three full charging and discharging cycles are indispensable. I hasten to inform you that these tips are not suitable for modern Li-Ion batteries, as they are devoid of the “memory effect” and other disadvantages.
So what do you do with a new battery, you ask? It’s simple. practically nothing! We changed the autonomous power supply to a new one, charged it 100% and use it. Do not drain your phone to zero, there is no need for this. Over time, the phone will “get used to it” and will start working at its full capacity, as well as display the correct charge level.
Follow the aforementioned tips and this time your battery will last significantly longer. All recommendations are also valid for new mobile devices with completely new batteries.
If you want to extend the life of the battery of your smartphone or tablet, then these tips and tricks will definitely help you, but if you do not want to bother, then it will still work for at least 2-3 years without problems.
Beware, first of all, of the high heating temperature of a mobile gadget, since modern lithium-ion batteries are very sensitive to overheating.
How to enable and disable T9
To turn T9 on or off on Samsung Galaxy A6, A10, A20, A50, A51, A71 and Galaxy J2, J3, J5, J6 series, do the following:
- go to the “Settings” of the smartphone;
- scroll down the page until you find General Settings. Tap them with your finger;
- in the category “Language and Time” go to “Language and Input”;
- a list will open in which select “Virtual keyboard”;
- from above, open the item “Samsung Keyboard”;
- next to “T9” you can enable or disable T9 on Samsung by tapping on the switch opposite.
If you cannot find the location of the above item, use the search bar. click on the magnifying glass icon in the main settings menu. Then enter “Language and input”.
Alternatively, how to enable T9 on your Samsung phone:
- click on the text input form (search bar in settings / browser, messenger dialog box);
- the keyboard appears. In the lower left or upper right corner, tap on the gear icon;
- turn on T9 by clicking on the switch opposite the function.
On Android, when you decide to install a third-party keyboard, the mode will be inactive or you will have to use its analog built into the application.
- start typing “When” in the dialing line;
- 3 variants of the word spelling should appear at the top of the keyboard panel;
- if you enter a word completely, you will be prompted to insert the next phrase.
T9 on Samsung: how to turn on, turn off, set up automatic error correction
Samsung’s T9 mode is a predictive typing system. If you connect it, when typing a message, the user will be offered words for forming sentences, auto-correction of errors will work. Explain how to configure, disable enable T9 on Samsung.
T9 settings on Samsung
To make the mode more convenient / productive, return to the window where it was activated and examine the available settings:
- AutoCorrect automatically changes letters in a word if it is misspelled;
- Text Labels creates labels for frequently used phrases, which are then used when writing text;
- Auto Spell Check underlines misspelled expressions. If the latter are not in the dictionary, it is required to indicate the languages of verification;
- “Automatic use of capital letters”. a capital letter will be put at the beginning of each sentence;
- “Spaces automatically”. a space will be inserted after adding a word;
- “Automatic punctuation”. double tap on the space will allow you to put a period, comma, semicolon;
- “Swipe control” includes typing words using a swipe to spell.
Settings help remove annoying auto-typing features like correcting mistakes or highlighting misspelled words.
When, after the update, T9 does not work on Samsung or the dictionary disappears with a suggestion to insert the next word, the problem is solved:
- re-activation and setting the mode;
- resetting the smartphone to the factory state for new system updates to take effect.
T9 on smartphones from the South Korean giant is an easy-to-use text input system that saves time by suggesting the use of frequently used words. The accuracy of the suggested phrases grows with the expansion of the built-in dictionary.
Charge from the correct source
Charging from a wall outlet will always be faster than from a computer, because its USB ports have too little power. Thus, the phone charges much faster from the outlet.
Also, the problem may be that you are using an adapter from another device, for example, from a Bluetooth headset, which is not intended for your gadget. This adapter does not supply enough current. In the case of the latest high-end smartphones, you may have a device that supports fast charging, but the adapter is not suitable.
Remember. safety first
Do not charge your gadget near water or in extremely hot or humid conditions. Do not keep the device connected to the charger for too long. Do not leave it to recharge overnight when it only needs 2-3 hours. This could damage the hardware.
If you want to replace the charger or the wire to it, be careful: cheap third-party adapters are quite dangerous. Recently, there have been many cases of mobile phone fires due to them.
The video below captured one of these cases:
Clean the charging port from dust and third-party fibers
Do you keep your phone in your jeans ? If so, then fibers may be the culprit: we have already lost count of how many times the fibers in our clothes were the cause of faulty charging.
You can also normalize the charging connector by blowing compressed air into it.
Replace the battery
A battery does not last forever, and after several years of use, it loses its capacity. The more often you charge and discharge it, the more likely it will deteriorate. Of course, if the battery stops working after six months of use, then you need to contact the seller for a warranty.
Some defective batteries can be easily identified by their appearance. If it is swollen, then it should be replaced immediately.
Try a different cable
The most fragile part of the charger is the cable. He constantly bends, which can damage him over time.
The easiest way to diagnose a damaged cable is to take another one and see if it works properly with your device. If so, you know the original charger wire is faulty. If not, then you need to look for a solution further.
Update software or downgrade to previous version
Software updates can impair cell phone battery life, especially when the old device gets a fresh version of Android. Newer smartphones and tablets are often optimized to take advantage of the latest software.
If this happened to you and you can’t find a solution, try rolling back to the previous version. You can, of course, try to do a hard reset first, as the manufacturers recommend, so as not to compromise the data on the device due to the old version of Android.
Likewise, sometimes the battery life of a smartphone can be significantly improved with a fresh update.
Use a different adapter
You have ruled out the presence of problems with the cable, then you need to check the performance of the charging device itself. This is much easier if you can pull the wire out of the adapter. We have come across many chargers where USB ports were worn out due to endless plugging and unplugging of the cable.
Also check the charging / wire operation on other phones, as this will help rule out the possibility that this is a problem with your smartphone. In addition, you must make sure that the socket is working properly.
Very often the metal coating inside the USB port and micro USB has poor contact, either through a manufacturing defect or through cable wear.
All you have to do is turn off the device, remove the battery if possible, and clean the contacts inside with something like a needle or toothpick. Do this very carefully and carefully, then insert the battery and reconnect the charger. 9 times out of 10, that’s all you need to do.