How to make everything remains on the memory card

Memory on smartphones is nonezin, despite the huge amount of information that many of us keep on them. That is why some manufacturers to this day do not refuse to expand the built.in memory using Microsd cards.

The current flagships support cards up to two terabytes, which repeatedly increases the internal reserves of smartphones. However, this does not solve another problem. all applications are automatically installed in the internal memory, and its number cannot be expanded. In this regard, we decided to write an article on how to make sure everything is saved on a memory card. It proposes several ways for owners of different devices at once-from budget models, which built 4-8 GB and ending with flagships on the latest versions of the Android operating system.

Why are the applications on the memory card do not save?

We hasten to upset you. in some devices by software, it will not be possible to allow automatic installation on Microsd by software. In particular, this applies to Android 4 devices.4.2 and above. up to the “marshmallows”. Fortunately, there is third.party software that allows you to do it. But we will not rush events. you will learn about everything in order.

We find out the version of the Android and now we will put everything on the shelves. First we need to find out the version of Android.

In this case, this is Android 5.one.one. This method is suitable for both smartphones and tablets. Actually, on this device without “external” intervention it will not be possible to make sure that all applications are automatically installed on the map. But, as you have already noticed, we have a third-party firmware with built-in ROOT laws.

With their help, you can easily install additional software, which, working in the background, will “throw out” all files from programs and playing on the flash drive.

Memory setting

Back to system tools again. On Android you can specify the SD card as the location site by default. Again, this does not always work.

How to Enable UEFI Boot in ASUS Mother Board / CSM.compatibility Support Module

In any case, try to do the following:

While in the settings, open the section “Memory”.

Click on the “preferred installation site” and select “SD-card”.

You can also assign a storage to save other files by designating the SD card as “default memory”.

The location of the elements on your device may differ from the above examples.

Android 7 and earlier versions

In these versions of the OS, the process of transferring the application to the memory card looks a little different. Go to “Settings”. “Applications”, then click on the desired application and click “Change”. Here you can choose where the program should be saved. Only for obvious reasons, this option in the old versions of the OS supports even fewer programs.

Link2SD allows you to transfer several applications to the memory card at once and provides a lot of useful information

If your phone does not support the movement of applications to the SD card, but you still want to do it, there is a program that can help you with this. It is called Link2SD. And it will be useful not only in the above situation, but also if you want to move several applications at a time, and not do it for each program manually.

We transfer games to the SD card to Android

Most of the user memory is the cache of the set games. To move it, we will use the Foldermount program. which knows how to mount directors from internal memory to external. Its work requires ROOT Rights.

Download Foldermount, run and grant the rights of the super sexman.

In the “List of steam” tab at the top click on “”.

Invent and enter the name of the folder-para in the first line.

Click on the second, after which the built.in file manager will open. The cache of the games is in the “Android/OBB” catalog, and applications in “Android/Data”. Go to the folder you want to mount and click on the checkmark.

A request will appear on the screen if you want to create the final folder automatically. Click “Yes” if you agree. In this case, Foldermount copies the path from the internal storage and creates the same on the external drive. Click “No” if you want to manually set the final mount of the mount and select the folder where to move the files.

To start copying, click on a checkmark and confirm the transfer by choosing “yes” in the next window.

The process will be displayed in the notifications panel.

move, card

Upon completion of copying, switch the toggle switch in the “List of steam” tab to install.

Below there is a button with the image of the pin, clicking on which, all the directors are mounted at once.

To move the files back from the destination folder to the source folder, first promote the pairs: turn off the toggle switch or click on a crossed punch, then hold the finger on the pair and click on the basket icon.

What you need to know about the additional storage

In general, one must understand that not all Android devices allow you to move parts of the installed application to the memory card, but for those that can do this, the process occupies only a few straightforward movements. Most flagships refused to support this function, and therefore it is more common in medium and low levels, but most often these are devices that provide for the ability to use an additional storage.

Unfortunately, even if your smartphone supports this function, not all applications support it. Large applications, such as games, leave most of their data in the internal memory. For example, Asphalt 8 puts only 64 MB of its data on a memory card, leaving as many as 1.4 GB to fill out the memory of a mobile device. Nevertheless, you can still save a precious place in this way, especially if you have many applications, just moving as many of them as possible to a memory card.

How to Move Apps to Sd card and Install Apps to sd card on Asus Zenfone 2 Laser

move, card

How to transfer photos and videos to Microsd Card to Samsung Galaxy

At its core, the methods of transferring photos for Samsung Galaxy and other Android devices do not differ, but I decided to separately describe this method using only those tools that are already preinstalled on devices of this, one of the most common stamps.

The first step (not mandatory, if you are not required). configure the camera so that the photo and video are shot on the Microsd memory card, it is very simple:

Open the Camera application.

Open the camera settings (gear icon).

In the camera settings, find the point “Storage place” and instead of “Memory of the device”, select “SD-Card”.

move, card

After these actions, all (almost) new photos and videos will be stored in the DCIM folder on the memory card, the folder will be created at the moment when you take the first picture. Why “almost”: some videos and photos that require high recording speed (photo in continuous shooting mode and 4k 60 frames per second) will continue to be stored in the internal memory of the smartphone, but they can always be transferred to the SD card after shooting.

move, card

Note: at the first launch of the camera after connecting the memory card, you will automatically be invited to save photos and videos on it.

We transfer Android applications to a memory card

Most default applications are installed in the internal memory. But it all depends on what place for the installation the developer of the program prescribed. He determines and whether it will be possible to transfer these applications to the external memory card or not.

Not all applications can be transferred to the memory card. Those that were preinstalled and are systemic applications cannot be moved, at least in the absence of Root rights. But most downloaded applications tolerate “moving” well.

Before starting transfer, make sure that there is enough free space on the memory card. If you remove the memory card, then the applications that were transferred to it will not work. Also, do not calculate that applications will work in another device, even if you insert the same memory card into it.

It is worth remembering that the programs are not transferred to the memory card completely, some part of them remain in the internal memory. But the main volume moves, freeing the necessary megabytes. The size of the transferred part of the application in each case is different.

Third.party software

The task can be completed using third.party applications. There are many file managers, with different intenses and functionality, but the way to move images is not much different in them. Consider how to transfer the photo from the device to the SD card using Total Commander.

    Run the application, select the “memory of the device” and go to the “DCIM” folder. Usually, photos taken on camera are stored in it.

You can familiarize yourself with other applications that provide the possibility of solving the problem under consideration in a separate article.

BYRGPUB.COM 2022