Table of Contents

How to enable and adjust sound on iPhone

Along with their other advantages, iPhones have the status of devices with the best speaker sound quality. But sometimes the owners of “apple” devices face a problem and wonder why the signal disappeared and how to turn on the sound on the iPhone again.

Turning on

It is not difficult to turn on the sound of an incoming call: you need to switch the toggle switch on the side of the gadget. It is intended to be in a position where the red stripe is not visible.

But sometimes the settings get lost, or the mode of use is chosen that is not suitable for the situation.

The ring signal is configured in a standard way. Check the position of the switch on the side of the machine. If at the top, beeps will be heard. If at the bottom, the sound is completely turned off and the owner will not wait for notifications about calls, messages “out loud”. Try to switch, the problem most often was this.

The call is not accompanied by a sound signal due to the out of order settings of the gadget. Try:

  • open the “Settings” of the phone;
  • select the item “Sounds”;
  • go to “Calls and alerts”.

If the slider is on the right: the melodies are heard. Left: iPhone is muted. You may have selected the wrong mode, or accidentally turned on Do Not Disturb or Airplane. Options exclude receiving signals, messages, notifications. Information is available through the menu, “Settings”.

Possible problems and solutions

Often, the sound is muted due to the lack of transition to the standard mode from the “Headphones”. Apple has provided two types of signal volume.

  • Normal: Standard volume.
  • “Headphones”: the sound is muffled in order to maintain the integrity of the eardrums.

Due to out of order phone settings, not updated operating system, mechanical damage to the headset connector, the iPhone “refuses” to switch to maximum volume when the headphones are disconnected. In this case, you just need to solve this problem, and the sound will return.

IPhone user inattention is another common reason for no sound.

While listening to music, watching movies, smartphone owners can adjust the volume using buttons or controls, forgetting to return to standard mode.

Review the parameters: if the settings are knocked down, you need to specify the initial data.

If the measures taken did not help, then the malfunction lies in the dynamics of the device. The mechanism may be clogged with dust or wet. Correcting the situation on your own is not always a justified attempt, there is a risk of harming the iPhone. It is recommended to contact a specialized service center.

How to turn off sound on iPhone

The easiest way to put your iPhone on silent is with a dedicated switch on the left side of your smartphone. It is located above the volume buttons and serves to mute the sound on the iPhone.

When the switch is closer to the back of the smartphone, and the orange indicator is visible, the sound is muted. When you slide the switch to this position, an icon with a crossed out bell will appear on the screen.

To enable ringtone on iPhone, slide the switch closer to the front of your smartphone. The bell icon reappears on the screen.

How to turn on silent mode on iPhone

Your iPhone can notify you of an incoming call not only with a ringtone, but also with vibration. When someone calls you, you will not hear the ringtone, but you will feel the vibration.

You can adjust vibration in Settings Sounds and vibration patterns (or Sounds).

  • Vibration while ringing: your iPhone will vibrate and you will hear a ringtone
  • Vibration in silent mode: iPhone will vibrate in silent mode.

make, sound, iphone

How to turn sound on or off on iPhone

On iPhone, you can mute an incoming call. This can be done using a dedicated switch or through the settings. Below we will show you how to turn sound on or off on iPhone.

This method is relevant for iPhone 7 and newer. For older models go to Sound Settings.

Other options

There are many options on the iPhone related to calls, messages, notifications, and more. To customize them, go to Settings Sounds. These options are responsible for this:

Silent mode is off, but there is no sound?

Controlling silent mode on an iPhone is simple in theory. with a toggle switch. However, in reality, everything is a little more complicated. Silent mode is disabled on iPhone, but you still can’t hear the sound of an incoming call? There may be several reasons for this.

You may be in Do Not Disturb mode. You may have blocked the number calling you, so you cannot hear the sound. First, check everything, and then review the settings again.

Standard adjustment methods

There are several ways to increase the volume on your mobile phone. The most common is to press the buttons on the end of the gadget. The upper button is responsible for increasing the volume, the lower one for decreasing.

If this method does not bring the desired result, then another one can be used:

  • Go to the device settings, open the “Sounds” section.
  • To increase the volume level, move the slider to the right side to the very end.

If you are not satisfied with the sound quality of the standard melodies, you can replace them with your own. To do this, you need to open the file located at the following address /System/Library/Frameworks/Celestial.framework/.

Then find the SystemSoundMaximumVolume document, which stores the maximum volume settings for the entire device.

The installed parameter will be 0.7, increase it to 0.99, reboot the gadget. After that, the mobile phone will start to sound louder.

How to increase sound on iPhone: sequence of actions

Having missed a few important calls on your mobile phone, you should think about how to increase the sound on the iPhone.

After all, periodically the volume can decrease for various reasons, as a result of which the subscriber does not know about the incoming calls and messages.

What to do in the event of a breakdown

If the mobile phone is in good condition, then there are no difficulties with adjusting the sound. But when the gadget is broken, problems can appear.

In this case, you can use the following instruction to increase the sound:

  • Turn off and on the device. This will reset the audio settings.
  • Disconnect the headset from the mobile phone, as when a call comes in, the sound will go through the headphones, and not the speaker.
  • Reset all settings. Before that, you need to create a backup to save data from your mobile phone.
  • If the side buttons are damaged when the mobile phone falls, this may cause a deterioration in the sound. The buttons could freeze, as a result of which the sound will either decrease or increase.

In such a case, the elimination of the problem is possible only through a specialist.

How to create a ringtone from a song directly on iPhone

Making ringtones on iPhone has always been a tricky quest. Previously, you had to use a computer, special applications or even jailbreak your device to do this.

With the release of iOS 13, a lot has changed, now a ringtone can be made from a favorite track right on the iPhone.

How to create ringtone on iPhone

Find and download any song or ready-made ringtone in MP3 format.

Now you can easily download almost any track on the network, and the new Safari features in iOS 13 allow you to download any type of file.

Save the melody you like in the Files application. This is where another useful iOS 13 feature comes in handy.

Download the GarageBand application to the iPhone. Free music creation software from Apple to turn a song into a ringtone in no time.

Launch GarageBand and select the Track template. Audio Recorder.

Switch to track editing mode.

Opening the object manager.

Select the downloaded ringtone from the Files application.

Drag it to a free track.

How to boost Iphone Audio Volume and Quality

You can trim the melody at your discretion, add filters, apply effects and even mix with another melody.

Go to the menu with the created melodies.

In the context menu of the melody, select Share.

In the export window, select Ringtone.

At the last step, we indicate which melody we want to use the track.

Everything! You can set your own melody for all incoming calls or for calls from selected subscribers.

If you go along the path Settings. Sounds, tactile signals. Ringtone, you will see all the created melodies.

With the help of a side swipe, you can delete unnecessary.

Artyom Surovtsev

I love technology and everything connected with it. I believe that the greatest discoveries of humanity are yet to come!

VivaVideo

A functional video editor with which you can quickly remove sound from a video. Please note that in the free version you can export a video no longer than 5 minutes.

On the “Video” tab, select a video from the library with which further work will be carried out. Tap on the “Next” button.

The editor window will appear on the screen. At the bottom, on the toolbar, select the “Mute” button. To continue, select the “Send” item in the upper right corner.

When you save a video to your smartphone’s memory, you have the option to save it either in MP4 format (quality is limited to 720p resolution), or export it as a GIF animation.

  • The export process will begin, during which it is not recommended to close the application and turn off the iPhone screen, as saving may be interrupted. When finished, the video will be available for viewing in the iPhone library.
  • Remove audio from video on iPhone

    The iPhone has a built-in tool for editing videos, but it does not allow you to mute the sound, which means that you will need to turn to the help of third-party applications anyway.

    VideoShow

    Another functional video reactor with which you can remove sound from a video literally in one minute.

    • Download VideoShow app for free from the App Store and launch.
    • Tap on the “Video Editing” button.

    A gallery will open, in which you will need to mark the video. In the lower right corner, select the “Add” button.

    An editor window will appear on the screen. In the upper left area, tap on the sound icon. a slider will appear, which will need to be dragged to the left, setting to the very minimum.

    READ  How to bring iPhone screen to TV

    After making changes, you can proceed to save the video. Select the export icon and then check the desired quality (480p and 720p are available in the free version).

  • The application will proceed to save the video. During the process, do not exit VideoShow or turn off the screen, otherwise the export may be interrupted. When finished, the video will be available for viewing in the gallery.
  • Similarly, you can remove sound from the video in other video editing applications for iPhone.

    How to turn off the sound on the “iPhone” on the camera and not only. Learning to mute your smartphone

    Quite often people wonder how to turn off the sound on the “iPhone” on the camera or in the system. After all, there are places where shooting is not prohibited, but you can’t make noise. At such moments, all device sounds should be turned off. And, as a rule, mobile devices in such places are asked to be turned off. But you can get by with the silent mode. Muting iPhone is often done in a few swipes.

    Headphones

    How to mute the sound on the iPhone on the camera? The simplest solution is to connect the headset to the device. In this case, the sound will be, but no one will hear it.

    • turn on the mobile device;
    • insert headphones into a specially designated jack on the phone;
    • use the camera for its intended purpose.

    If a person uses wireless headphones, then the connection is via Bluetooth. The corresponding item is located in the gadget settings. After selecting a headset and syncing it, the camera will mute.

    Applications

    How to mute the sound on the iPhone on the camera? There is another somewhat non-standard approach. It consists in editing the file responsible for the sound of the mentioned component. This can only be done by using third-party applications.

    Muting the sound in the iPhone on the camera is carried out as follows:

    • Download MobileFinder and install the utility on your PC. You can find it in the AppStore.
    • Connect “iPhone” to computer via USB.
    • Launch the latest iTunes and sync devices.
    • In MobileFinder, go to System / Library / Audio / UISounds.
    • Double click on the document photoShutter.caf.
    • Change file name.
    • Apply adjustments.

    That’s it, you can now take pictures quite easily. We learned how to turn off camera sound on iPhone 4 and more. In addition to the listed actions, users sometimes download specialized software for working with the camera. There is a lot of it. The main applications can be found through the AppStore. Some programs have dedicated buttons for camera sounds. If you set the switch to the appropriate position, you can put the device in the “Silent” mode.

    Settings

    But this is only one of the possible layouts. Now you can consider a somewhat non-standard solution. How to mute the sound on the iPhone on the camera? The following instructions will help to do this:

    • Load “iPhone” and click on the Home button. It will open the main menu of the device.
    • Go to “Settings”. “Sounds”.
    • Move the slider to the left to the maximum. We are talking about a mark in the “Calls and Applications” block.
    • Save changes.

    This technique is not used very often in practice. He’s not too fast. However, you can forget that the sounds on the “iPhone” are muted in this way. Therefore, it is recommended to act differently.

    Tumblers

    How can I turn off the camera sound on “iPhone 5S” or any other? The fastest, easiest and most reliable solution is to use a special toggle switch. This is a button located on the side of the device. What she does? Turns on the “Silent” mode on the “apple” device. All modern phone models from Apple have such a switch. It is enough just to move it to the appropriate position.

    Why iPhone lost sound: a description of possible reasons

    The reasons why the ringing sound or the sound during a conversation most often disappears on the iPhone can be conditionally divided into software and hardware.

    What to do if sound disappears on iPhone?

    An ordinary user will hardly be able to accurately diagnose the cause of the loss of sound. Therefore, you will have to take measures aimed at eliminating all sorts of reasons. starting with the simplest.

    Perform a visual inspection of the gadget. The reason for the lack of sound may lie “on the surface” and consist, for example, that the speaker is covered with a film or a cover.

    Restart your gadget. As a result of the restart, the cache will be cleared, temporary files will be deleted, and iOS will start working again. A reboot can eliminate a cause such as a freeze of the operating system. If after launching the iPhone there is still no sound, you should exclude this reason from the list of possible ones and move on.

    Reset the settings. With this action, you will bring all the settings of the mobile device to the initial configuration. Follow the path “Settings”. “General”. “Reset”, click on “Reset all settings”, then enter the password twice.

    A reset of this type will not delete the user’s personal data, therefore, it is not necessary to create a backup before this operation.

    Uninstall apps. Remember which of your actions preceded the loss of sound. Perhaps you installed a tweak from Cydia and then immediately discovered the problem? “Take down” applications and tweaks that have been downloaded recently, reboot the device again and check the sound.

    Back up your data in any way you want. The following operation will delete information on the iPhone.

    Restore the gadget through DFU mode. Connect iPhone to PC with cable, open iTunes and enter “apple” device into DFU MODE. How to start DFU mode is described on our website. When iTunes prompts you to restore your gadget, answer yes.

    If none of the above measures worked, there are no software errors. the problem lies at the hardware level. All that the user can do in this case with his own hand is to clean the headphone jack and speaker.

    This work must be done as carefully as possible! Do not use metal tools (such as a needle), otherwise you risk scratching the contacts. You can remove dirt from the 3.5 mm connector with a toothpick or a thin cotton-tipped stick.

    It is best to use a dry brush with soft bristles to remove debris from the speaker.

    If cleaning does not work, you will have to come to terms with the fact that the iPhone needs professional repair.

    IPhone has lost sound. what to do?

    There are many reasons why sound can be lost on iPhone. The user will hardly be able to identify the correct one, so he will have to take various measures in order to eliminate the deficiency. What are these measures, this article will tell.

    An iPhone that has lost sound actually loses most of its functions. it cannot be used either as a music player or as a means of communication. Therefore, the user, faced with such a malfunction, is forced to immediately attend to its elimination.

    The iPhone owner does not need to immediately prepare for the worst. to call for service and expensive repairs. If the device is mechanically working, then the user will most likely be able to solve the problem on his own.

    Hardware problems

    Hardware problems that can lead to the loss of sound during a call and in the speaker are as follows:

      Filling. Due to the ingress of liquid under the case, the headphone jack microcircuits are oxidized. Because of this, the iPhone constantly “thinks” that a headset is connected to it. although the 3.5-Jack connector is actually free. It is better to “cure” the iPhone from flooding in a service center, but “first aid” should be provided to the gadget with your own hand. Our article tells you what to do if your iPhone falls into water. Clogged speaker or headphone input. This problem most often affects people who prefer to carry iPhones in their s without using protective cases. The speaker grill and 3.5-connector are inevitably clogged with small debris and dust. Mechanical damage to the speaker. Breakdown of the speaker is a result of physical impact on the mobile device. In this case, you need to replace the speaker or at least a non-working microcircuit. The replacement can be done by a person who knows how to disassemble iPhones and owns a soldering paw.

    Software errors

    Common software reasons for missing sound include:

      Unsuccessful jailbreak. Hacking the system can lead to an error in the iOS code. Installation of unofficial software. Only those tweaks should be downloaded from Cydia that have been verified and recommended by experts on thematic portals. The operating system freezes. Incorrectly set iPhone settings.

    Where to carry the iPhone on which the sound has disappeared?

    Unfortunately, the loss of sound is usually not the result of a factory defect, but the user’s careless handling of the device. If the iPhone is flooded or if its speaker is broken due to mechanical impact on the gadget (falling), there will be no warranty repair. the seller will return the broken smartphone to the buyer.

    Before going to the seller and demanding a free fix, the iPhone user should look into the SIM card slot. There is a humidity sensor. if it is red, then you can not count on the seller’s assistance. iPhone is a drowned man and is no longer under warranty.

    After the seller refuses, you will have to carry the iPhone to the service center yourself. The table below contains the approximate for the elimination of defects that can lead to the loss of sound:

    Muting the photo camera sound on iPhone

    Camera sound is a digital sound effect of pressing the camera shutter when a photo is taken on an iPhone. This sound is heard at any time of the photo, which is set by default on the phone. A temporary solution is to move the slider at the top of the phone so that an orange field appears on the screen. This will put the phone in silent mode and all sounds will become silent, including the camera sound. Of course, this will also switch the ringer and notification sounds to silent mode. It is also worth noting that there is another method, using applications, and changing files can cause operational problems.

    Step-by-step guide to setting up your smartphone, how to mute the camera on iPhone.

    Connect your iPhone to your computer using a USB cable. You will be prompted to update your iPhone and install the latest updates. Do this and unplug your phone when the installation is complete.

    Open the application list on iPhone and launch MobileFinder. Find the following folder: / System / Library / Audio / UISounds. This folder contains all default sound effects loaded on the system.

    Scroll down and find the following name: photoShutter.caf

    Double click on the file, then click once on the “filename” settings. Change the file name to something else. The change can be as minor as, for example, moving the letter “r” in the word shutter.

    Close MobileFinder and try to take a photo. There should be no more of this sound.

    If you are fine with adjusting the sound of your iPhone camera, please take note of the additional tips:

    Later versions of iPhone software may eventually have a way to turn this camera click sound on and off. Check your iPhone settings before using the rename method.

    Changing the file name can affect operational issues, and such applications may not always perform as expected. There is no guarantee that this method will work on all versions of iPhone.

    The iPhone has a pretty powerful smartphone camera, and the iOS camera app is great for most people. But, if you’re a serious photographer and want more camera controls, you’re better off using a third-party camera app. The Apps Store has a wide range of dedicated photography apps such as ProCamera, Manual, Halide or Camera.

    Super iPhone camera features you need to use to be an incredibly popular photographer on the web.

    Are you fully using your iPhone camera when shooting? While the camera app is easy to use, some of the iPhone camera settings are so well hidden that you might not know how to use them on your smartphone.

    You should get tens or even hundreds of thousands of likes for your photos on social media. Instagram,

    Soon, we will publish lessons that are clear from the first words. Upon learning about them, you will discover super iPhone camera features that will drastically improve your photos and give you much more control over your iPhone camera.

    READ  How to enable geolocation on iPhone 5s

    Technology news, video reviews, prices

    27 Комментарии и мнения владельцев:

    Well, finally, now I figured out how to turn off the sound in the camera on the iPhone! Mercy, I don’t really need this shutter in the phone’s camera. 🙂

    Supper. Well, finally I found how to turn off the camera shutter sound. Thank you. Everything is clear and concise.

    Good day! I do everything according to the instructions, but right away the catch! Apple Apps Store can’t find MobileFinder. I found it on the Internet, but I don’t know how to install it in iTunes. Help needed! Thanks in advance.

    I have an iPhone 5 model and I could not find this program in the Apple Apps Store. Writes “No results for” mobilefinder “

    The mobile finder app is no longer available in the app store. In order to turn off the sound you need:

    Download (to your computer) the ifunbox application.

    Connect the i-device to the computer in the application, select the tab ifunbox classic.

    Raw Filesystem / System / Library / Audio / UISounds.

    For some reason I can’t find the UISounds folder on my own, please help me with the search!

    And if MobileFinder doesn’t find it ?! And how to do these 3 points, nothing is installed for me.

    Jailbreak. how to do it at all!

    Upload ifunbox. I don’t understand what kind of program is being loaded! Nothing is simply not clear, some shortcuts were created to access the Internet, and the program itself is where?

    And the third point. Well, we haven’t reached this point yet! Help please, can throw tabs or how to load this ifunbox.

    What to set up when the camera clicks with sound in iPhone in silent mode?

    Can you please tell me, does the click sound directly from the camera or other part of the phone? But what if you just take and change the camera to another

    I’m surprised at such a moment why the camera click on the iPhone is triggered in silent mode?

    with a simple movement of your finger, turn on the switch to vibration mode and there is no sound!!

    Just as an option download the silent quick burst camera app from the app store and take photos silently.

    In the application settings you can remove the sound (mute), in Russian for some reason they translated it as “mute” 🙂 And as I said, you can safely take a photo without sound

    Thanks for the tip on how to mute the camera on iPhone. It helped! =)

    I see there are knowledgeable people. Give advice on what to do if the sound does not turn on for incoming calls on iPhone 6 how to add sound to the speaker ?

    And then it will be possible to return the sound back with the help of the Jail?

    Hello! The front camera doesn’t seem to work for me. I don’t know why the camera on the iPhone flips the photo and shoots it mirrored. I am not comfortable when it turns out, as it were, a mirror image of the photo. How to prevent the front camera from flipping the photo? Help me find ways to solve the problem with the image!

    on iPhone 5c there are no Libreri and systems folders, but a bunch of others, such as “books” “dcim” “photodata”, etc. In the file manager, through the search, it does not find the photoshutter file. Where to find this stupid sound now?

    Why my iPhone 5s does not work with the rear camera, what can I do??

    is aiklaud needed for this? or without it, you can tell me?

    Dear Apple fans, do you think it is worth paying attention when buying a new smartphone to the iPhone 7 vs. Galaxy S7 camera tests?

    Thank you, now I’ll have some coffee and start trying to remove sounds in the iPhone with the camera

    how can I turn off the sound of the camera, it’s not very convenient to take a picture, iPhone 6 iOS 10 answer my question

    Finally it turned out to turn off the sound of the camera clicking, thanks for the instructions! Otherwise, I didn’t want to cover the speaker with my finger or do a flashing, jailbreak the iPhone. I also learned that for some countries they produce iPhone models in which the shutter sound is disabled. Apparently this is due to the requirements for the privacy and privacy of those residents.

    Phones made for japan have this problem, so they fight voyeurism. At the moment, I have not found a solution except how to install StageCamHD ( 75). Camera application that can turn off the sound (in itself, not in the office. camera). Such a sadness.

    How To FIX iPhone Speaker Problems & NO SOUND (PROVEN) (w/ subtitles)

    I want to say thank you for the hint which application on the iPhone takes pictures silently!

    Is the customizable sound setting available for the user when shooting on the iPhone 5s? I want to set my sounds

    I would like to work with my sound at the phone camera. Of course, I know how to download a melody, but how to turn on the sound when photographing on iPhone 8 with my audio file, I ask you to help me, if it’s not difficult for anyone, of course, please!

    By clicking on the icon, share information on the social network:

    What to do if the mode is disabled, but there is no sound

    In case the silent mode is disabled on the iPhone, but the ringtones of incoming calls are not played, it is worth checking if the Do Not Disturb function is activated, since both of them can be enabled at the same time. Also, the sound can be muted if the calling number was blocked by the user.

    When the button is broken

    In the case when you need to turn off the sound on the iPhone, but the button on the body of the smartphone has broken, the “Do not disturb” mode comes to the rescue, which is configured in the Control Panel and through the Settings menu. It blocks all distractions from ringing tones and vibrations to light alerts.

    To enable the Do Not Disturb function through the Panel, you need to slide your finger across the display from bottom to top and tap on the crescent-shaped icon. The corresponding icon will also appear in the status bar.

    You can also go to “Settings”. “Do not disturb” and slide the switch opposite the corresponding function.

    Do not disturb can be made permanent or scheduled for a specific time (for example, at night from 22:00 to 7:00).

    • choose in which case incoming calls and notifications will be blocked. always or only when the iPhone is locked;
    • allow certain “Favorite” numbers to receive incoming calls;
    • activate the “Repeated calls” function (canceling the muffling of the second call lasting three minutes from the same subscriber);
    • configure the “Do not disturb driver” function;
    • edit auto-reply to messages.

    The main difference between “Silent” and “Do not disturb” is that in the first case, when you receive messages and notifications, the screen starts to glow, but in the second one does not.

    Features of mute and unmute sound on iPhone

    In iOS, developers have implemented several ways to turn off notification sounds for incoming calls and receiving notifications at once. The first is a silent mode that replaces the ringtone with vibration. The second is the “Do not disturb” function, which blocks any signals (including vibration and light warning) for a certain period of time. Both functions are subject to Customizing.

    How to turn off silent mode on iPhone

    To turn off silent mode on iPhone, simply slide the switch on the case to the right. The action will be accompanied by vibration and the appearance of a bell icon on the display, under which there will be a volume status bar.

    To turn off the Do Not Disturb function, you need to click on the crescent moon icon in the Control Panel again or toggle the corresponding slider in the Settings menu to the inactive position.

    Silent mode on iPhone

    This is a function used to reset incoming calls, as well as to turn off notifications and replace them with vibration (if vibration itself has been configured). This is the fastest and most convenient way to mute the device without turning it off completely.

    The quietness of a smartphone can be useful when you are in places where you need to maintain silence: at work, in public places. At the same time, turning off the sound will not prevent the user from receiving notifications from applications and about missed calls. at such moments the display will be highlighted, displaying the received notification.

    Attention! Silent mode does not apply to the alarm set in the Clock system application, and therefore it will ring at the appointed time. But the alarm clock set in a third-party program may not ring.

    How to turn off the sound on a smartphone

    To quickly activate the silent mode of the iPhone, a special button is provided, which is located on the left side panel of the device, above the volume control buttons.

    To turn off the melodies, just slide the button to the left. An orange indicator will appear next to it, and a notification about switching to “Silent” and an icon with a crossed-out bell will appear on the device screen.

    To turn off not only sound notification, but also vibration, you need to go to the “Settings” of the phone, select the section “Sounds, tactile signals” and move the switch to the right opposite “In silent mode”.

    The choice of the appropriate mode depends on the iPhone usage scenario. Switching to Do Not Disturb is useful when your smartphone is in your hands or on your desktop. nothing distracts you from an important business meeting or work. Also, this function is useful at night to protect the device user from calls, alert melodies and a glowing screen.

    Muting iPhone

    System settings

    The first thing you can do in this section of the parameters is to completely turn off the volume for calls and notifications by moving the corresponding element to the extreme left position. The result of this action is the same as when using the buttons on the device body and control center.

    Note! In this way, you will not be able to completely mute the sound of calls, messages and notifications. it will be played at minimum volume. If you wish, you can also disable or, conversely, leave active the ability to change the audio signal level using the buttons on the case.

    Below you can not only select the melodies of ringtones, messages, notifications, etc., but also individually disable any of them. This is useful for cases where you want, for example, to make calls remain silent, and SMS, mail or calendar messages (like any other system application) continue to beep, or vice versa. In the same section of options, you can deactivate the sound of keyboard clicks and screen lock.

    In order to mute the sound of any arbitrary application, both system and third-party, do the following:

      Return to the main list of settings and go to the subsection “Notifications”.

    Here in the “Notification style” list, tap on the desired item to go to its parameters.

  • If necessary, do the same with other programs. Please note that for some system components, you will need to perform the same actions as in the previous paragraph of the current instruction. disable the default melody by choosing the “No” option instead.
  • Note: The volume mute option is not available for apps that do not send notifications.

    Thus, thanks to the system parameters, you can mute all applications installed on the iPhone, including standard ones, and only some of them.

    Do Not Disturb Mode

    If the above solutions for some reason do not suit you or you want to mute the iPhone on a schedule or set your own exceptions, you should use the “Do not disturb” mode. You can activate it in the control room. After completing this action, the device will be put into silent mode, and its screen will remain off for incoming calls, messages and notifications. A crescent symbol appears on the status bar, similar to the one shown above. You can configure the operation of this mode more subtly in the iOS settings.

      Open “Settings”, scroll down a little and go to the “Do not disturb” section.

    If you want to enable this kind of silent mode, move the first switch to the active position.

    READ  Data won't transfer to new iPhone

    determine if the screen will dim when this mode is enabled or not.

    Additionally, you can configure exclusions and some other parameters:

      define when “Do Not Disturb” will apply to incoming calls and notifications (“Silence”). whether they will be muted “Always” or “While iPhone is locked”;

    configure “Allowing from calls”. allow or deny incoming calls “From all”, “From anyone”, “From favorites”, “From all contacts” (in groups) when silent mode is active;

    enable or disable “Repeated calls” if you wish;

  • define the parameters “Do not disturb driver”.
  • Please note that the “Do not disturb” mode settings you specify will apply regardless of how it was activated. independently from the control center or settings, or turned on automatically at the specified time.

    If the “Silent mode” we considered in the first part of the article allows you to instantly drown out the iPhone signals when necessary, then “Do not disturb” is an excellent opportunity to automate this process, which does not require you to take any action after the initial setup.

    Note: You can control the operation of the mode discussed in this part of the article, enable or disable it, using the voice assistant Siri. just call it in any convenient way and say the command “Turn on / off the” Do not disturb “mode”.

    Control point

    Another option to mute the sound on iPhone is to go to the control center, where the corresponding element is provided.

      Open “PU”. To do this, on models without Face ID, swipe up from the bottom of the screen, with Face ID. from the top right down.

    This action allows you to achieve exactly the same result as using the “Sound.” on the case. calls, messages and notifications will remain audible if you have not previously disabled them, and applications will become silent.

    Turning off or changing the volume level in this way is also adjusted separately for each playback device. phone speakers, headphones, speakers, etc.

    Buttons on the body

    The easiest way is to turn off the sound on the iPhone using a special button on its body, located above the volume controls. this turns on “Silent Mode”.

    Note: Using the “Volume.” does not allow you to completely drown out the sounds of calls and notifications. if you press it repeatedly, these signals will be played at the minimum audible level.

    It is worth noting that after turning on the silent mode, the sound will still be played in multimedia applications (Apple Music, Spotify, Netflix. YouTube, Podcasts, browser, etc.). You can turn it off completely by pressing the volume down button located on the phone body during direct listening or viewing. this will need to be done several times until the level becomes minimum.

    Note! On iPhone, the volume is adjusted separately for speakers and headphones or speakers, that is, if you lower the volume level while an accessory is connected, and then disconnect it, the sound will be restored to its previous value. This also works in the opposite direction. It is possible to determine visually through what the sound is currently being played on the lock screen and in the control center (it will be discussed in more detail later), as well as in third-party applications with built-in players. In addition, when using an accessory, the playback control button in the mini player is highlighted in blue.

    It is also important to note that turning off the sound using the button on the case allows you to achieve the opposite effect to that in the “Silent mode”. the volume of calls, messages and notifications will remain at the same level, but it will not be heard in multimedia applications. Therefore, if you need to completely mute the iPhone, these solutions should be used together.

    Main reasons

    Account owners are faced with other reasons for the loss of sound on a social network. The problem needs to be fixed. There are many reasons for its appearance. Popular issues or misconfigurations to consider:

    • In insta, the rollers start after opening the tape. This is for the convenience of the user. It is allowed to instantly see what users have posted. If, when opening a video, there is no voice, you need to perform a couple of actions. Find the microphone icon in the picture. Click on it. The reverse action removes the voice of the video.
    • An outdated version of a public resource application. Here you need to update the software. The scheme of action depends on the OS of the device. You need to act through the Play Market or AppStore.
    • If there is no positive result in the process of performing these actions, you need to check the sound on your phone or tablet. A similar option is regulated in the standard settings.

    In most cases, after performing such manipulations, the problem with the sound of the video on the social network is solved. Regardless of why Instagram audio doesn’t work.

    Why is there no sound on Instagram videos?

    There are many reasons for the lack of sound. You need to install them, adjust the main indicators of the insta. Playback is allowed to be controlled by switching off and on. To activate, touch the screen while the video is playing.

    Further, it is recommended to move the slider, select a comfortable volume level. If it is necessary to turn off the sound, the procedure is repeated. Playback may be activated in another way. For this, a key is used that adds volume. You need to make it active during the playback of content.

    Why Instagram videos are loading without sound?

    Users of the resource on the PC often face the lack of sound. If the problem manifests itself in the web version of the insta, you need to carry out the following manipulations:

    • The browser does not work correctly or is out of date. You should open an account in Chrome, Opera or Firefox browsers. Different Google counterparts will not work. It will not be possible to fully use the portal functions;
    • The presence of faulty drivers. Programs in such a case work silently. To fix the failure, a person needs to update the software for the motherboard or for the on-board card. The user should right-click on the My Computer section and go to the page with the device manager. A red cross is visible in the list of installed devices. This is evidence of a broken card.

    If a modern browser is installed on your PC, but no notification sounds, you need to update the player. It is required to go to the official Adobe Flash portal. A suitable OS option is selected. Activated Download.

    A search engine is selected where it is planned to use the instu. Here it is worth paying attention to supplementary applications. If you do not need to use an antivirus, you should uncheck the boxes. After downloading, it is important to run a special installation file. The end of the installation is expected. The system will prompt you to close the browsers during the reinstallation period.

    The web page is reopened. The video starts. If the sound does not work in Instagram stories, you can judge the problem in your laptop or PC. Iron is worth checking for damage. But it is advisable to entrust this operation to specialists.

    Why Instagram sound doesn’t work on your phone: in stories and videos

    The sound on Instagram does not work. for what reason and what to do. a question that is quite common among users of the social network. This greatly complicates the use of the resource. It is impossible to listen to what is being said in the posted content. It is difficult to view videos in the feed and in stories. The article presents useful tips on how to restore sound. The reasons for the failure. You need to follow the recommendations presented in the article. After that, you can fully use the instu.

    Why Instagram audio stopped working?

    The user is faced with the lack of sound in the social network feed. You need to perform easy and understandable actions. But before that, examine the causes of the problem. Here are the most important ones:

    • The sound option in the smartphone or PC is turned off. You will need to activate the button;
    • Disabled special push notifications in insta. In this case, you need to log into your account, call up the menu. Go to settings. Find the corresponding tab. Here you should enable notifications for events taking place on the social network.

    If the user is holding Xiaomi or a similar device, non-standard sound may be activated. In this case, it must be returned to the usual version.

    Missing audio on Instagram on my phone

    If a problem occurs on a smartphone, you need to act depending on the installed OS and on why it arose. The inability to shoot a video with voice or music is often based on closing access to the microphone. In the absence of the desired result, you should act according to one of the presented schemes.

    Quiet sound when talking on iPhone: what is the reason?

    If the sound of the iPhone dies during a conversation, you have to strain your hearing a lot. Therefore, it is better to immediately find the cause of the problem and fix it.

    First, sometimes the solution can be as trivial as the problem itself. You may have accidentally changed the volume settings. In order to return everything back, during a call, simply press the volume up button on the iPhone.

    Secondly, if the screen protector on the iPhone display is not glued well, it can drown out the sound. Read about how to properly stick the film on the smartphone screen in our article.

    A smartphone case may reduce the volume of the sound if it is too tight or not to fit (for example, covering the speaker). If the problem is in the case, then it is easy to fix it by changing the case to a suitable one, and the volume will be normal again.

    If you carry your iPhone in your a lot, dust and other debris can build up on your speakers and adversely affect sound quality. In this case, the speaker should be cleaned.

    As is often the case with technology, at times the cause of the problem lies in a combination of problems with various software. In such cases, restarting sometimes helps and the iPhone works fine again.

    Quiet sound on iPhone during a conversation: add volume

    Does your iPhone sound very quiet during phone calls? There may be several reasons for this.

    In this article, we will tell you about the possible reasons why the interlocutor in a telephone conversation on the iPhone may be hard to hear. In addition, we will try to offer several solutions to the problem.

    IPhone network problems and technical defects

    But the two most common reasons for the quiet sound when talking on the iPhone are technical problems either on the side of your device or on the side of the cellular operator.

    If during a call the sound stalls intermittently and does not improve when you turn on the speakerphone, the reason may be network problems. Your phone just won’t pick up, so the volume and sound quality will fluctuate during a call. Read about how to improve the quality of communication in hard-to-reach places in our other material.

    You can also easily check if there is a speaker problem (which is the second common reason for quiet sound when talking on an iPhone). Record a short voice note via the corresponding application, and then play it.

    If you can hear everything at normal volume, then the reason for the quiet sound is most likely due to network problems. If you have to listen carefully while playing a note, a defect in the speaker may be the cause of the quiet sound. In this case, your iPhone needs to be repaired.

    Before repair, you can use the headset to talk on the phone. So you will hear your interlocutors well again.

    Make Your iPhone Louder with This Trick (IT ACTUALLY WORKS)


    BYRGPUB.COM 2021