IOS 9.3.5 Rollback Instructions for 32-bit Devices (Jailbreak Instructions)
Attention! This manual is relevant only for users of Apple devices on processors: A5, A6 with iOS 9.3.5.
Hi, I’ll start with a preface, iOS 9.3.5 has become the final system for Apple’s lineup of A5-based devices, namely:
- iPad 2.
- iPad 3 (iPad with Retina display).
- iPad mini (1st generation).
- iPhone 4s.
- iPod touch 5.
And it became perhaps the most disgusting system from Yabloko, after iOS 4.3 of course.
The devices worked extremely disgusting, the system became unbearably slow, and this applied not only to devices based on the above-mentioned crystals, but this also affected users of the iPhone 5S, 6, and it is simply impossible to say something about the weak hardware of these two devices.
For personal use I have the first “Minic” and iPod touch 5, and I can say with full confidence that Apple literally killed this generation of devices with every OS update, and as a result, the final version (9.3.5) worked on them not just badly. but disgusting, and this concerned not only the smoothness of the interface, but also the work of programs, of which I will single out the Procreate graphics editor. in which, when creating illustrations in retina resolution (2048×1536), the application crashed and in some cases did not save the project, as a result, it was necessary to do everything again and postpone the deadline for the delivery of the project. In all other programs, common symptoms are as follows. friezes, convulsive scrolling and delays in typing. There was no such hell in iOS 8.
Then I purchased another model of an apple tablet, but I continued to use my mini as a portable device for surfing the Internet and watching movies. in principle, it worked and okay. But in spite of everything throughout the year, I continued to look for ways to rollback and jailbreak my mini-device, but everything was in vain, no utilities for this OS existed. And the other day I saw the release of an exploit on reddit that allows you to do Jail on old devices. The first thought was that this is another fake that can do nothing. After I went to several domestic sites about Apple and saw articles dedicated to this “event”. my happiness knew no bounds. Immediately I ran to put the exploit on the device and look for ways to roll back the firmware, but here again bad luck, I did not find any utilities that did this and I remembered about my iPod, which I updated from iOS 6.1.3 and instead of version 9.3.5 I got 8.4.1, which is very usable on old devices. And what I decided to do next and how I put the jailbreak, you will find out in the instructions below. 🙂
List of devices that support this exploit:
- iPhone 4s.
- iPhone 5.
- iPhone 5c.
- iPad 2.
- iPad 3.
- iPad 4.
- iPad mini 1.
The jailbreak is half untethered, so after rebooting the device, you will have to reinstall it (without a computer), this is done simply, you need to follow points 7-9 based on the above instructions
If you have any questions about rollback and jailbreak. write them in the comments, if possible I will try to answer each one. 🙂
How to jailbreak iOS 10 (10.0.1-10.1.1). iOS 10.2 on iPhone or iPad using Yalu and Cydia Impactor
A few days ago, the well-known hacker Luca Todesco, known as qwertyoruiop, released the first jailbreak for iOS 10, better known as Yalu.
This jailbreak is still in its early stages of development, has beta status and causes some problems. It supports limited iOS devices, including iPhone (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus), iPod touch 6G, iPad (Air, Air 2), iPad Pro (9.7, 12.9), iPad mini (2, 3, 4) and may not work as expected due to a large number of technical issues that are present in this jailbreak.
Also, Cydia Substrate is not working properly yet, so not all Cydia tweaks will work. Luca deliberately disabled Cydia Substrate support to prevent users other than jailbreak developers from using this jailbreak tool. However, if you want to try out the device and check out this beta jailbreak, then check out the step-by-step guide below on how to jailbreak iOS 10.0.1. 10.2 using Yalu and Cydia Impactor.
Warning: Yalu jailbreak is beta and may cause problems on your device, so you act at your own risk. We strongly recommend that you wait until the stable version of the jailbreak is released.
Please review the following points before proceeding:
- This jailbreak version is compatible with the following devices:
- iPhone (5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus), iPod touch 6G, iPad (Air, Air 2), iPad Pro (9.7, 12.9), iPad mini (2, 3, 4 )
How to jailbreak iOS 10 on iPhone or iPad using Yalu and Cydia Impactor
Step 1: Download the latest Cydia Impactor from here and the Yalu jailbreak for iOS 10.0.1. iOS 10.1.1 from here or from here for iOS 10.2.
[php snippet = 2] At the time of this writing, the IPA jailbreak file was named “mach_portal_yalu-b3.ipa”.
Step 2: Double click to open the dmg file with Cydia Impactor.
Step 3: Drag it to your Applications folder and run.
Step 4: You can get a pop-up message as shown below. Select “Open”.
Step 5: Then connect your iPhone or iPad to your computer via USB.
Step 6: If Cydia Impactor recognizes the device, it will appear in the dropdown list as shown below.
Step 7: Drag and drop the Yalu IPA file to Cydia impactor.
Step 8: You will be prompted for your Apple ID and password. This information will only be sent to Apple and will be used to sign the IPA file.
Step 9: After the application is installed on the device, you should see its icon on the main screen with the name “mach_portal”.
Step 10: In order to launch the application, you must first confirm the developer profile. To do this, go to the “Settings” menu. “Basic”. “Profiles and Devices” and click on the profile called your email address.
Step 11: Click the “Trust” button and confirm it.
Step 12: Go back to the main screen and launch the “mach_portal” application.
Step 13: There will be a white screen for 15-20 seconds. This means that the jailbreak process has started. Do nothing until the process is complete.
Step 14: After the jailbreak is successfully installed, the device will automatically reboot and the Cydia app icon should appear on the home screen.
Congratulations, your device is now jailbroken! When you start Cydia for the first time, its initial setup will take some time. Once that’s done, you can start using it, but keep in mind that most tweaks you won’t be able to install as Cydia Substrate doesn’t work. In addition, this jailbreak is semi-tethered, which means that every time you reboot your iOS device, you will have to launch the Yalu app (mach_portal) to re-jailbreak.
If the jailbreak is causing problems on your device, then the best thing to do is to remove it by restoring your device to iOS 10.2.1.
Let us know how your jailbreak went in the comments below.
Does Checkra1n support iPhone X, iPhone 8 and iPhone 8 Plus iOS 14?
Technically yes. Checkra1n can be used to jailbreak iPhone 8, iPhone 8 Plus and iPhone X. However, due to a new security measure introduced by Apple in iOS 14 for these devices, iPhone 8 / iPhone X owners must disable Face ID / Touch ID and password lock. before they can use Checkra1n to jailbreak their device.
Here’s how the Checkra1n team explained the new security changes made by Apple in iOS 14:
In iOS 14, Apple added a new SEPOS protector on A10 and above (except for Apple TV and iBridge): if the device was booted from DFU mode and the Secure Enclave receives a request to decrypt user data, it triggers panic on the device. Since checkm8 does not give us control over the Secure Enclave, this is a non-trivial solution. However, with the recently published Blackbird vulnerability, we find it possible to take control of the Secure Enclave on the A10 and A10X and disable this mitigation. Support for A10 and A10X devices is under development and expected to be ready in the coming weeks.
Checkra1n compatible devices
Right now Checkra1n can be used to jailbreak the following iPhones and iPads running iOS 14:
- iPhone 7 and iPhone 7 Plus
- iPhone 6s, 6s Plus and SE
- iPad 5th generation
- iPad Air 2
- iPad mini 4
- 1st generation iPad Pro
- Apple TV 4 and 4K
How to jailbreak iOS 14 using Checkra1n on iPhone or iPad
The Checkra1n team has updated their jailbreak tool with preliminary support for iOS 14. Checkra1n uses the bootrom exploit to jailbreak iPhone X and older devices, so it was expected to be one of the first jailbreak tools to be updated to support iOS 14. However, none of that didn’t. really expected the iOS 14 jailbreak to be available within a week of the OS’s public release. If you want to jailbreak your iPhone running iOS 14 using checkra1n, follow this tutorial.
For now, Checkra1n has only added preliminary support for jailbreaking iOS 14. Support is also limited to only a few older devices and does not include all iPhones and iPads vulnerable to the checkm8 exploit.
How to jailbreak iOS 14 on iPhone and iPad using Checkra1n
Download the checkra1n macOS app from here. Proceed with the installation by opening DMG and dragging the application into the Applications folder.
Right-click the checkra1n application in the Applications folder and select Open. Do no open the app by double clicking on it. Click on Open Again from the pop-up security dialog.
IOS 9.3.5 IPad Mini 1st Generation Jailbreak | 3UTools EASY method
Now connect your iPhone or iPad to your Mac using the Lightning cable. Your device may ask you to trust your computer. Click Trust and enter your device password.
The connected device should be automatically detected and displayed in the checkra1n app. If not supported, you will receive an apology message and the Start button will be grayed out.
If a compatible device is connected, continue the jailbreak process by clicking the Start icon button.
You will need to put your iPhone or iPad into DFU mode to continue. To do this, do the following:
- Without disconnecting it from your Mac, turn off your iPhone or iPad.
- Press and hold the side button and volume down button at the same time for at least 10 seconds. At this point, you shouldn’t see the Apple logo. If you do, restart the whole process.
- Release the side button, but hold the volume down button for another 5 seconds. The Connect to iTunes logo should not appear on the screen. If yes, then you held down the buttons for too long.
- Your iPhone or iPad should show a black screen when in DFU mode. If done correctly, checkra1n app will automatically detect your device.
Once your iPhone or iPad is detected by Checkra1n in DFU mode, it will automatically start the jailbreak process. After that, you should see the checkra1n downloader app on your iPhone / iPad home screen.
Open the app and click Cydia to install the package manager. Once installed, you will complete the jailbreak process.
Remember, iOS 14 has just been released by Apple and this is the first OS jailbreak. Many of the existing jailbreak settings are unlikely to work as expected in iOS 14, and you’ll also run into a lot of compatibility issues. So, if you can wait a few days or weeks, I would recommend doing so before jailbreaking your iPhone or iPad running iOS 14.
How to jailbreak any iPhone or iPad running iOS 13.5 and earlier
Pwn20wnd has released unc0ver 5.0.0 jailbreak for all Apple devices running iOS 13.5 and iPadOS 13.5. How to jailbreak almost any iPhone or iPad using the AltStore tool.
Attention: we do not recommend carrying out any manipulations that could lead to loss of warranty or damage to devices. The methods described are for informational purposes only and are not calls to action.
Developers claim unc0ver is compatible with all devices running iOS 11. iOS 13.5.
Below is a list of devices on which the unc0ver command has tested the jailbreak:
- iPhone 11/11 Pro / 11 Pro Max;
- iPhone XR / XS / XS Max;
- iPhone X;
- iPhone SE / SE (2020);
- iPhone 8/8 Plus;
- iPhone 7;
- iPhone 6S;
- iPod Touch;
- iPad 2019;
- iPad Mini 5.
It is important to know
The jailbreak requires the AltStore app, which uses your Apple ID to sign unc0ver for seven days. The concept is similar to Cydia Impactor, except that it doesn’t require your device to be tied to a computer. Instead, you need your computer and iOS device to be connected to the same Wi-Fi network to activate on AltServer.
We recommend that you create a new Apple ID so as not to risk the privacy of your real account.
AltStore is available for both Mac and PC. Before starting the jailbreak procedure, be sure to create an encrypted backup of your device.
macOS
- Download and install AltStore utility;
- Launch AltStore, click on the application icon in the menu bar and select the Install Mail Plug-in option;
- Open the Mail app and go to Settings in the menu bar.
- In the General tab, click on Manage Modules and check the AltPlugin box, then apply and restart Mail;
- Connect your iOS device via USB;
- Click AltStore on the menu bar, then go to Install AltStore on your device;
- Log in with your Apple ID and click Install;
- Open Settings General Device Management on your iOS device and click on your Apple ID;
- Trust the developer certificate from AltStore;
- Go to the unc0ver website in Safari and open the jailbreak in AltStore;
- Re-enter your Apple ID;
- Launch unc0ver on the main screen and click on the Jalibreak button;
- Done!
Windows
- Install iTunes and create a backup;
- Download the AltStore archive, unpack it and install the Setup.exe file;
- In the Start menu, enter AltServer and open the application;
- Click the arrow icon on the taskbar and select AltServer;
- In the menu that opens, move the mouse cursor over “Install AltStore” and select your iOS device;
- Enter your Apple ID and password when prompted;
- Open Settings General Device Management on your iOS device and click on your Apple ID;
- Trust the AltStore certificate;
- Go to the unc0ver website and open the jailbreak in AltStore;
- Re-enter your Apple ID;
- Launch unc0ver on the main screen and click on the Jalibreak button;
- Done!
In case the unc0ver jailbreak or AltStore tool did not find your device, try the checkra1n jailbreak. We talked about him here.
How To Jailbreak iPad Mini 1 in 2021! (iOS 9.3.5 / 9.3.6. 9)
Digger editorial staff maintains a channel in Yandex.Dzene. Subscribe!
How to jailbreak ipad mini
A few hours after the final version of iOS 8.4 went public, hackers from TaiG came up with a jailbreak solution. The solution was the application of the same name, updated to version 2.2. Using TaiG Jailbreak Tool, you can jailbreak iOS 8.4 on any device running the latest OS version.
The latest TaiG build is a stable release and is completely free from bugs typical for the first versions of the jailbreak tool. Release 2.2 includes the latest versions of Cydia and UIKitTools, among other things.
As you know, in the iOS 8.4 update, a new music player appeared with support for the Apple Music streaming service, so with the release of TaiG 2.2, it is advisable to update to this version and repeat the jailbreak procedure.
Jailbreak iOS 8.4 is compatible with the following models:
How to jailbreak iOS 8.4 on iPhone and iPad using TaiG:
Step 0: Back up your device.
Step 1: Download the new version of TaiGJBreak from this link. You will also need the latest version of iTunes, you can download it here.
Step 2: If your iPhone or iPad has a password set, go to the Password / Touch ID & Password menu and disable it.
Step 3: You also need to turn off Find My iPhone. Without this, TaiG 2.2 will generate an error. To do this, open the iCloud menu. Find iPhone and turn the switch to the “Off” position.
Step 4: Connect iPhone or iPad to computer and run TaiG 2.2 utility downloaded in step 1 as administrator.
Step 5: The program will recognize your iPhone / iPad model and show the installed OS version. iOS 8.4.
Step 8: Open Cydia and wait for the required components to download. It remains to click the “Restart” button to reboot the device.