Street camera

How To Install A Video Camera On The Street

The hardest thing is to hide, disguise the camera located on the street. The contours of the wall of a house, entrance group or fence are always clear and predictable, and any protrusion will be regarded as a likely location for the tracking device. At the same time, the camera must ensure both the control of the local area, and the check of everyone entering the house, and it is difficult to keep order on the playgrounds for children. Among the acceptable options:

  • Place the device along the carved window frames or in any other decorative elements of the house;
  • Place the camera at the base of the weather vane;
  • Also install the device in the intercom;
  • Use a mailbox for THESE purposes;
  • Place the camera in the bird feeder, this solution will require the wires to be hidden. You can place decorative lighting on the same tree, which will provide the necessary nutrition;
  • Use

All ways to hide the camera must ensure its safety from temperature changes, rain and hail, therefore the chosen method must ensure not only the secrecy of the location, but also the safety of the case. It is also worth considering that collecting information without informing people about it is punishable by administrative fines, therefore, placing hidden devices without warning that there is surveillance on the territory is allowed only in private spaces.

When building the architecture of a security system at home, office or sales area, sometimes you should think about how to hide surveillance cameras. This will not only increase the level of security of spaces, but also protect an expensive device from vandals.

How to disguise a surveillance camera on the street

When building the architecture of a security system at home, office or sales area, sometimes you should think about how to hide surveillance cameras. This will not only increase the level of security of spaces, but also protect an expensive device from vandals.

Home camera

If the camera is installed on site, it is desktop and NOT large, experts are ready to offer 7 ways to hide it from the prying eyes of a careless housekeeper or naughty children. Among them:

  • Using a bouquet of artificial flowers. Plastic or textile roses or gladioli, familiar to the look, will successfully help disguise a small device. The only inconvenience is that you will have to wash the dust from them yourself.
  • Soft toy. It is quite possible to sew a camera into it and install the toy so that the power cords are not visible. To prevent a bear or a hare from becoming victims of children’s games, they can be vintage, the floor is part of a carefully preserved collection.
  • Boxes for needlework. A large and convenient container for threads, knitting needles, rhinestones will allow you to conveniently place a small device in it. You just have to sacrifice the integrity of the beautiful chest and make a hole in it for the camera’s eye.
  • Light switch housing. The camera will have to be built into the wall, but this solution will completely protect it from prying eyes and solve the problem of power supply. To implement the project, it will be necessary to attract professional repairmen. You can also mount the camera in the wall separately from the light control devices, it is better to do this in inconspicuous places. under a windowsill or between the junction of furniture, while you need to Make sure that the required viewing angle is maintained.
  • Bookcase. This is the simplest solution, the camera can easily get lost among the array of books, magazines, figurines and photographs that usually decorate the shelves of a bookcase.
  • Table lamp with a large shade. It is for him that no one will guess to look for a tracking device. Also, a device that has a ceiling mount type can be successfully accommodated behind a curtain rod.
  • The camera, located at the entrance to the apartment, in the stairwell, can easily be hidden in the intercom case. It can also be placed there in the lamp body, paying attention to the fact that it is transparent and not matte. Some masters also place cameras in cabinets that contain electricity meters.

Home camera

If the camera is installed on site, it is desktop and NOT large, experts are ready to offer 7 ways to hide it from the prying eyes of a careless housekeeper or naughty children. Among them:

  • Using a bouquet of artificial flowers. The familiar look of plastic or textile roses or gladioli will successfully help disguise a small device. The only inconvenience is that you will have to wash the dust from them yourself.
  • Soft toy. It is quite possible to sew a camera into it and install the toy so that the power cords are not visible. To prevent a bear or a hare from becoming victims of children’s games, they can be vintage, the floor is part of a carefully preserved collection.
  • Boxes for needlework. A large and convenient container for threads, knitting needles, rhinestones will allow you to conveniently place a small device in it. You just have to sacrifice the integrity of the beautiful chest and make a hole in it for the camera’s eye.
  • Light switch housing. The camera will have to be built into the wall, but this solution will completely protect it from prying eyes and solve the problem of power supply. To implement the project, it will be necessary to attract professional repairmen. You can also mount the camera in the wall separately from the light control devices, it is better to do this in inconspicuous places. under a windowsill or between the junction of furniture, while you need to Make sure that the required viewing angle is maintained.
  • Bookcase. This is the simplest solution, the camera can easily get lost among the array of books, magazines, figurines and photographs that usually decorate the shelves of a bookcase.
  • Table lamp with a large shade. It is for him that no one will guess to look for a tracking device. Also, a device with a ceiling mount type can be successfully accommodated behind a curtain rod.
  • The camera, located at the entrance to the apartment, in the stairwell, can easily be hidden in the intercom case. It can also be placed there in the lamp body, paying attention to the fact that it is transparent and not matte. Some masters also place cameras in cabinets that contain electricity meters.

Public space camera

A camera that secures a sales area, restaurant or office located on the ceiling or wall is more difficult to disguise. Professional cameras must have a good viewing angle, they can be given out by a working backlight, and indicators, and a sudden turn of the eye behind the tracking object. Among the main solutions:

  • Disguise the camera as a fire alarm sensor. This will require some financial investment and refinement of the case, but the effect will be amazing, the device will NOT be paid attention.
  • Place the camera in the computer or its monitor, replacing it with a standard device or simply placing it under the case of the system unit. This will be a good solution for sales areas. It can also be placed there in cash registers.
  • Install the camera in flower pots placed on the restaurant windowsills. In a cozy cafe with many household items, you can implement all the solutions used in a city apartment.

Office spaces There are not many options to disguise the camera. Someone always puts new folders in filing cabinets, bookshelves are actively used. The solution can be a picture placed on the wall, on which the device is placed. You can also spend money and purchase a two-way mirror, placing the camera for them will help create the ideal viewing angle.

Public space camera

A camera that secures a sales area, restaurant or office, placed on the ceiling or on the wall, is more difficult to disguise. Professional cameras must have a good viewing angle, they can be given out by a working backlight, and indicators, and a sudden turn of the eye behind the tracking object. Among the main solutions:

  • Disguise the camera as a fire alarm sensor. This will require some financial investment and refinement of the case, but the effect will be amazing, the device will NOT be paid attention.
  • Place the camera in the computer or its monitor, replacing it with a standard device or simply placing it under the case of the system unit. This will be a good solution for sales areas. It can also be placed there in cash registers.
  • Install the camera in flower pots placed on the restaurant windowsills. In a cozy cafe, which has many household items, you can implement all the solutions used in a city apartment.

Office spaces There are not many options to disguise the camera. Someone always puts new folders in filing cabinets, bookshelves are actively used. The solution can be a picture placed on the wall, on which the device is placed. You can also spend money and purchase a two-way mirror, placing the camera for them will help create the ideal viewing angle.

Installing an Intel Xeon LGA771 processor on a 755 socket. Intel Xeon on LGA775 socket. Street camera

The hardest thing is to hide, disguise the camera located on the street. The contours of the wall of a house, entrance group or fence are always clear and predictable, and any protrusion will be regarded as a likely location for the tracking device. At the same time, the camera must ensure both the control of the local area, and the check of everyone entering the house, and It is difficult to keep order on the playgrounds for children. Among the acceptable options:

  • Place the device along the carved window frames or in any other decorative elements of the house;
  • Place the camera at the base of the weather vane;
  • Also install the device in the intercom;
  • Use a mailbox for THESE purposes;
  • Place the camera in the bird feeder, this solution would require the wires to be hidden. You can place decorative lighting on the same tree, which will provide the necessary nutrition;
  • Use

All ways to hide the camera must ensure its safety from temperature changes, rain and hail, therefore the chosen method must ensure not only the secrecy of the location, but also the safety of the case. It is also worth considering that collecting information without informing people about it is punishable by administrative fines, therefore, placing hidden devices without warning that there is surveillance on the territory is allowed only in private spaces.

READ  How to connect your GoPro 4 to your phone

Our experienced team of editors and researchers contributed to the creation of this article and reviewed it for accuracy and completeness.

Number of sources used in this article: 12. You will find a list of them at the bottom of the page.

The wikiHow content management team closely monitors the work of the editors to ensure that each article meets our high quality standards.

Installing outdoor security cameras is a great way to keep track of your property while you are away from home. If you are worried that someone might break or damage the cameras, hide them. Fortunately, there are many different tools and techniques you can use to hide cameras from view.

DIY supervision, how to install yourself

At the dawn of perestroika, concepts such as a camera and a tape recorder entered our life. These wonders of the twentieth century were used exclusively for entertainment. The cameras filmed everything that fell into the lens, and with the help of tape recorders they looked at the footage, and much of that for which one could go to the felling. Times were changing rapidly. The kind of cameras used to shoot home movies today bring a smile, and not a change of tape recorder came the DVD system. So, for what it was previously possible to get a free ticket to Magadan, today they show on TV, but the conversation is NOT about that. In our country, they quickly realized that cameras installed in a country house and on a site would be replaced by several guards. If 10 years ago, the installation and connection of such cameras were available only to wealthy people, today anyone who wants to do it can install observation with their own hands. Of course, there are monitoring systems for the acquisition and installation of which you will have to pay a lot of money. But in the domestic market there are many systems with good quality and reasonable price. In addition, the simpler the system, the easier it is to install. These days, homeowners install both wireless surveillance cameras and wire and cable systems on their own. Some types of cameras and intercoms can be instituted without the help of specialists.

Surveillance refers to the presence of a camera, power supply, monitor and recorder (DVR), and a lock to be attached to the scrotum. Depending on the number of cameras, a monitor is selected that allows viewing all the images. But the monitor’s capabilities are limited, and in the case of using a large number of cameras on the site (in the house), it is necessary to purchase a multIPlexer. This device allows you to view simultaneously 9 or more points to which, respectively, 9 or more cameras are directed.

The cameras in which we are talking have different dimensions. There is a separate type of cameras designed for covert surveillance. Some are shaped like a matchbox, others. Thick short felt-tIP pen. Hidden cameras can be installed almost anywhere. If the owner of the house needs to know what is being done outside his site, a hidden camera is mounted in a fence element. As a rule, a brick pillar becomes such an element. Editing Must be attended by at least two people. We have already said that at the time of laying electrical cables, most owners DO NOT remember surveillance and signaling on the route. For a wireless system, no cabling is required, which cannot be said about a system that is based on the supply of voltage and signal (and, in SEPARATE cases, audio signal) through wires. Therefore, the work associated with the installations of these systems contains certain difficulties. But if there are at least two healthy men among the owners of the house (or the owner has a reliable friend), then they can cope with this task on their own, and not Turning to professionals, that is, to install surveillance systems with their own hands. So the word master encountered in the story can also be attributed to the homeowner, who decided to cope with this work on his own, and to his assistant.

Consider the option when surveillance with the introduction of wires needs to be installed in an already built country house.

The work begins with studying the paths of the route. The wires going into the house should be hidden in the area from the fence to the dwelling. In addition, it is necessary to determine how the wires will go through the house to where they are connected to the monitor. It is also important to determine the location of the power supply. It depends on what voltage will pass through the network wire. If the power supply is located in the house, then this device is connected directly to the 220V power source, and the 12V voltage will go to the camera via the network cable connected to the power supply terminals. If the power supply is on the street (in a sealed box installed on a pole from the side of the site), then the power cable must be connected to a power source in the house, and a voltage of 220V will go through it (to the point of connection with the power supply).

After the masters determine the location of the route and the length of the wires, the preparation of the loop (the required number of wires) begins. For the convenience of installation in our country, a combined cable is produced, which contains wires of various cross-sections and purposes. This cable can be used for signal transmission and 12V power supply. For route 220, it is advisable to use an independent power cable ШВВП (2×0.75). Independence is necessary so that electrical pickups from the GoPro do NOT distort the signal.

Having cut off the required number of wires, the specialists start digging a trench from the brick pillar to the base, after which they tighten the wires into the PVC pIPe and bury it. The next step is cable entry into the house. In order for the cable to be inside the room, a hole is punched in the wall of the house using a puncher and a long (up to 1m) drill. In the section from the exit of the wires (in the base) to the hole in the wall, cable channels are installed, in which the wires are hidden. The cable pulled into the house is also hidden in cable channels. The ends of the wires entering the house are equIPped with connectors.

Before bricking the camera up, make the necessary connections (temporary) and connect the camera to the monitor. The master, holding the camera in his hands, selects its location, move the device along the pillar. At this moment, the second master looks at the monitor and, when determining the optimal version of the picture, gives a signal to his partner. Having marked on the pillar the place where the camera will be hidden, the foreman (foremen) proceeds to the preparatory work for its installation. If the camera has the shape of a matchbox, then cuts are made in the brick with the help of a grinder. Then, with the help of a chisel, a square hole is made, the depth of which should exceed the thickness of the chamber by 1-2 cm, and the distance between the sides should be 5-8 mm more than the same distance in the chamber. While one master is doing this work, the second prepares the site for the route from the camera to the mounting box, which is installed on the same pole. We have already said that a power supply can be placed in this box. But, regardless of whether the power supply is in the house or stays on the street, the back box is used to connect the wires coming from the camera and from the house.

A small piece of corrugated hose is stretched at the end of the PVC pIPe going into the post. The cable coming out of it is inserted into the hole of the mounting box and cut off in such a way that the ends of the wire are conveniently connected to the ends of the wire from the camera. After that, it is necessary to make a hole in the post, through which the camera wires will fall on the side of the post that is invisible to passers-by. We will talk about the intricacies of this worthy operation in the next article.

If you want to install the camera yourself in the apartment with your own hands, we recommend that you read our small installation instructions.

Source Alexey Kaverau

If you are interested in this equIPment, call us at tel. 044 592-37-39. We will help you install and configure this equIPment for your safety. The warranty for our works is 12 months.

Public space camera

A camera that secures a sales area, restaurant or office located on the ceiling or wall is more difficult to disguise. Professional cameras must have a good viewing angle, they can be given out by a working backlight, and indicators, and a sudden turn of the eye behind the tracking object. Among the main solutions:

  • Disguise the camera as a fire alarm sensor. This will require some financial investment and refinement of the case, but the effect will be amazing, the device will NOT be paid attention.
  • Place the camera in the computer or its monitor, replacing it with a standard device or simply placing it under the case of the system unit. This will be a good solution for sales areas. It can also be placed there in cash registers.
  • Install the camera in flower pots placed on the restaurant windowsills. In a cozy cafe, which has many household items, you can implement all the solutions used in a city apartment.

Office spaces There are not many options to disguise the camera. Someone always puts new folders in filing cabinets, bookshelves are actively used. The solution can be a picture placed on the wall, on which the device is placed. You can also spend money and purchase a two-way mirror, placing the camera for them will help create the ideal viewing angle.

How to disguise a surveillance camera?

When building the architecture of a security system at home, office or sales area, sometimes you should think about how to hide surveillance cameras. This will not only increase the level of security of spaces, but also protect an expensive device from vandals.

Home camera

If the camera is installed on site, it is desktop and NOT large, experts are ready to offer 7 ways to hide it from the prying eyes of a careless housekeeper or naughty children. Among them:

  • Using a bouquet of artificial flowers. Plastic or textile roses or gladioli, familiar to the look, will successfully help disguise a small device. The only inconvenience is that you will have to wash the dust from them yourself.
  • Soft toy. It is quite possible to sew a camera into it and install the toy so that the power cords are not visible. To prevent a bear or a hare from becoming victims of children’s games, they can be vintage, the floor is part of a carefully preserved collection.
  • Boxes for needlework. A large and convenient container for threads, knitting needles, rhinestones will allow you to conveniently place a small device in it. You just have to sacrifice the integrity of the beautiful chest and make a hole in it for the camera’s eye.
  • Light switch housing. The camera will have to be built into the wall, but this solution will completely protect it from prying eyes and solve the problem of power supply. To implement the project, it will be necessary to attract professional repairmen. You can also mount the camera in the wall separately from the light control devices, it is better to do this in inconspicuous places. under a windowsill or between the junction of furniture, while you need to Make sure that the required viewing angle is maintained.
  • Bookcase. This is the simplest solution, the camera can easily get lost among the array of books, magazines, figurines and photographs that usually decorate the shelves of a bookcase.
  • Table lamp with a large shade. It is for him that no one will guess to look for a tracking device. Also, a device that has a ceiling mount type can be successfully accommodated behind a curtain rod.
  • The camera, located at the entrance to the apartment, in the stairwell, can easily be hidden in the intercom case. It can also be placed there in the lamp body, paying attention to the fact that it is transparent and not matte. Some masters also place cameras in cabinets that contain electricity meters.
READ  How to install apps on ipad 2

Street camera

The hardest thing is to hide, disguise the camera located on the street. The contours of the wall of a house, entrance group or fence are always clear and predictable, and any protrusion will be regarded as a likely location for the tracking device. At the same time, the camera must ensure both the control of the local area, and the check of everyone entering the house, and it is difficult to keep order on the playgrounds for children. Among the acceptable options:

  • Place the device along the carved window frames or in any other decorative elements of the house;
  • Place the camera at the base of the weather vane;
  • Also install the device in the intercom;
  • Use a mailbox for THESE purposes;
  • Place the camera in the bird feeder, this solution would require the wires to be hidden. You can place decorative lighting on the same tree, which will provide the necessary nutrition;
  • Use

All ways to hide the camera must ensure its safety from temperature changes, rain and hail, therefore the chosen method must ensure not only the secrecy of the location, but also the safety of the case. It is also worth considering that collecting information without informing people about it is punishable by administrative fines, therefore, placing hidden devices without warning that there is surveillance on the territory is allowed only in private spaces.

HOW TO INSTALL THE SURVEILLANCE CAMERA

If you decide to start self-installation of surveillance, it is understood that you will also purchase the equIPment yourself.

Just in case, please note that when choosing a surveillance camera, you should take into account not only the technical characteristics, but also its design. Obviously, the latter directly affects the installation process.

Consider the installation features of the two most commonly used types of cameras:

  • Dome;
  • Hull on bracket.

Installing the dome camera.

The classic installation option for this device is ceiling. However, most models can be wall mounted rather successfully. True, in this case, the adjustment of the viewing area in the horizontal plane will be limited (Fig. 1 a, b).

Due to their low weight, dome cameras can be mounted on almost any structure. This advantage is fully manifested when mounted on Armstrong type suspended ceilings. Two mounting options are possible here:

  • Directly on the stove;
  • Or on the crosshair of the profile.

Since the strength characteristics of the suspended structure of such ceilings leave much to be desired, installation on a profile can be pretty nerve-racking. It is easier to fix the camera to the plate by placing a wide enough spacer on the opposite side.

For this, it is quite possible to use the material at hand, for example, trimming the electrical box (Fig. 2).

Sturdy camera on a bracket.

Housing devices often have a significant mass, therefore it is better to install them on dense and rigid carriers using a pair of self-tapping dowels (Fig. 1 c). These cameras are ideal for outdoor installation, especially if you choose the right location and design.

SELF-INSTALLATION OF SURVEILLANCE IN A HOUSE OR APARTMENT

When performing any kind of installation work in a house or apartment, the preservation of the design of the premises plays an important role. The most inconvenience in this regard is the connecting wires. There are, in fact, two outputs:

  • Application of wireless surveillance systems;
  • Hidden laying of cable infrastructure.

With the first moment, everything is clear enough. Hidden wiring can be done either in grooves, which is real only at the stage of major repairs or construction, or in the spaces between supporting structures and finishing materials (plasterboard, plastic panels, etc.).

In this case, the design of the surveillance camera should make it possible to output the wires from the side of the mounting plane. Dome cameras are ideal in this regard. When choosing a mount on a bracket, it is desirable that it has internal cavities for placing cables.

By the way, hidden wiring is also relevant when installing cameras on the street. This installation method allows you to prevent both deliberate damage to connecting lines and their protection from adverse external influences.

Speaking of hidden wiring, it’s worth talking about how to install hidden surveillance cameras. Two approaches can be distinguished here:

  • Camouflage devices of standard design (dome, body cylindrical, etc.);
  • Use of cameras specially designed for THESE purposes.

In any case, the installation of such systems has a number of specific features discussed on this page.

2014-2020 G. All rights reserved.
Site materials are for informational purposes only and cannot be used as guidelines and regulatory documents.

How to install a surveillance camera. Part 2

In the first part of the article, we examined the features and methods of installing surveillance cameras indoors. Now it’s time to talk about how and where to install a surveillance camera on the street.

An important aspect when installing an outdoor surveillance camera is choosing the right location. It is necessary to take into account all the nuances of the object in order to exclude blind spots, prevent day or night exposure (from the sun, light sources, etc.), position the cameras so that the attacker cannot easily reach them.

On the pillars

This type of camera installation is preferable for monitoring the situation in areas where a huge number of people or vehicles accumulate: squares, parks, motorway sections, parking lots, open market areas, etc.

This installation method provides excellent visibility from a height. In addition, a camera mounted on a pole is much more difficult to damage, as it is NOT accessible without a ladder.

PTZ cameras

Rotary surveillance cameras are installed taking into account the greatest space capture. As a rule, such devices are installed at the corners of buildings to cover both sides of the facade and the surrounding area. PTZ cameras are installed using a special hanging bracket, which makes it possible to change the direction of view.

Before installing a surveillance camera on the street, assess all the perspectives of each of the proposed places, taking into account the tIPs that you received from this article. And, of course, you need to choose a camera that you want to install outdoors, with performance characteristics that match the weather conditions in your area.

Head of the technical support group Benedikt Maksimenko.

Where to install a surveillance camera on the street

Under the roof ledge

The most popular method for installing cameras in country houses, cottages, office buildings, industrial areas. The roof canopy provides optimal rain protection for the camera and shields the lens from direct sunlight. In addition, installing a surveillance camera under the roof is convenient because you can easily hide and lead the wires through the attic. Also, under the roof ledge, the camera looks more harmonious than in the middle of the building wall. However, difficulties arise with this installation method, in particular in winter, when icing can form on the roof ledge, which blocks the view of the camera.

On the wall of buildings, fence

Here it is important to choose a surface where the attached camera will hold firmly and securely. This is ideal for perimeter surveillance.

Corner-mounted cameras provide excitement with minimal blind spots. All types of cameras are suitable for wall mounting: rectangular on a bracket, domed, spherical. It is necessary to install the camera NOT lower than 2.5 meters, otherwise there is a high probability that they can get into it and damage it.

How to install an outlet on the street

Often there is a need to use electrical appliances on the street. For example, you need to connect a Christmas garland, a luminous figure or some electrified tool to the electrical network.

It is impossible to install the outlet outdoors in the same way as indoors, since in an open area, that is, outdoors, various negative factors will affect the outlet: splashes, drops or a stream of water, dust, as well as mechanical stress. The socket must be reliably protected from these factors. Consider the question of how to install an outlet on the street.

The first thing to do is choose a place to install the outlet. The socket outlet intended for outdoor installation must have a housing that has a maximum degree of protection. IP65. But, in any case, this does NOT mean that the outlet must be installed in the open. When choosing an installation site, preference should be given to the safest option, both from the point of view of possible mechanical effects and direct effects of precIPitation.

That is, the socket should be mounted at a sufficient height so that it is not accidentally damaged. In order to minimize the direct impact of precIPitation on the outlet as much as possible, you can choose a closed place, for example, under a canopy or a ledge of the roof of a house.

Connecting the socket to the house wiring

The socket is powered from the nearest switchboard. If the main switchboard is installed in the yard of the house, then you can connect the cable to power the socket in it. If the electricity input is made to the shield located inside the room, then the cable is connected from this shield. In the latter case, to bring the cable out of the room to the outside, it should be protected at the point where the pIPe section passes through the wall.

The cable, which will pass outside the room to the outlet, must be additionally protected by a corrugated pIPe or metal hose. The cable, which has sufficient protection for outdoor installation, is laid without additional protection.

The socket must be mounted on a non-combustible surface, or, if it is nevertheless required to install the socket on a combustible surface, it is necessary to ensure complete isolation of the mounted socket from this surface.

READ  How to connect GoPro to computer via WI-FI

You should also pay special attention to the correct connection of the cable to the mounted socket. The place where the cable is connected to the socket must be airtight: the rubber seal of the housing must fit snugly against the cable. Otherwise, the manufacturer’s declared degree of protection of the socket housing will not be ensured.

Usually, there are two cable connection points on the body of the plug socket. at the bottom and at the top of the socket. For maximum protection against moisture, connect the cable at the bottom of the outlet.

It should be noted that electrical appliances used outdoors are more dangerous than indoors. This is due to the fact that a person may be in direct contact with the ground when operating electrical appliances. Therefore, it is very important to ensure reliable protection of a person from electric shock.

You must install a socket outlet with a ground connection and connect it to the common ground of the house. Also, it is imperative to install a residual current device on the wiring line that powers this outlet. In the event of a current leakage through damaged insulation of wiring or electrical appliances, the RCD will not only protect against electric shock, but also prevent a fire.

The socket is designed for a specific load (power). If an electrical appliance with a higher power is included in it, it will be damaged. Therefore, to protect the outlet, as well as the cable that powers it in the switchboard, in addition to ultrasound, it is necessary to install an automatic switch.

Installation of an outlet on the street in the dashboard

There is an alternative option. installing an outlet on the street in the dashboard. This method is relevant if you want to install other elements outside the room. For example, the house has a three-phase input and it is planned to install a switch, clamps for connecting three-phase consumers and a socket for connecting single-phase consumers in the mounted panel.

A characteristic feature of this method is that the protection of the elements mounted in the shield, including the plug socket, is carried out by the shield itself, the body of which has sufficient protection for outdoor installation, that is, the value is not less than IP65.

In this case, the degree of protection of the socket housing and the second elements mounted in the shield does not play a role. It is determined by the operating conditions of these elements. That is, if the sockets will not be exposed to any mechanical stress, then you can choose a conventional outlet for indoor installation with a degree of protection IP20.

Which of the two above methods should you choose: install the outlet in an open way or place it in a shield? In this case, it all depends on what the socket is intended for.

If you plan to periodically connect electrical appliances to this outlet for a short period of time, for example, an electrified tool for the duration of the work, then you can choose any of two methods.

If electrical appliances are connected to this outlet for a long time, for example, New Year’s street decorations (garland, glowing figures), then it is better to install the outlet in an open manner. The socket in the flap is not suitable in this case, since when plugged into such an outlet with electrical appliances, the flap itself remains open, therefore protection from external negative factors is NOT provided.

Connection type

Wired cameras seem to be more reliable at first glance, but this is only partially true. The Wi-Fi connection for the cameras is reasonably well protected from stream interception. Signal jammers that interfere with household appliances are practically harmless to cameras. In addition, these devices are not legally available to ordinary citizens, they need permission.

A much more important issue is the ease of setting up the surveillance. Wireless cameras are much easier to mount: just connect the power supply. For a wired camera, you will have to pull the cable from the router and separately the power.

All IP cameras can connect to the Internet via the Ethernet connector. Some have the ability to receive power through the same connector, this technology is called PoE. The built-in Wi-Fi module only makes it possible to use the wireless network, and does not oblige you to do so. One such model, the Nobelic NBLC-2210F-WMASD, is a Wi-Fi PoE dome camera in an IP67 waterproof housing. Built-in microphone makes floor surveillance even more effective.

Camera at the entrance

To install a camera in an entrance, you do not need permissions, as if you were putting it on the street. over, there is a clear law in the Russian Federation in this regard. The main thing when installing a camera is to respect the interests of neighbors. In the Constitution of the Russian Federation 1 h. Art. 23 written that everyone has the right to privacy, personal and family secrets.

If the camera is aimed at the neighbors’ door or the doors themselves fall into the lens, then they have the legal right to sue you and force you to shoot the camera. It is advisable to have verbal confirmation from the tenants of the house, that is, discuss whether they are against installing a surveillance camera at the entrance. If possible. Get Written.

The second point in setting up surveillance is the lack of disguise. A person passing by must clearly understand that he is being filmed by a camera. Covert surveillance is prohibited for civilians in the Russian Federation. Also you must place signs on what is being watched.

Resolution and pixels

At such small distances, 1.3 MP will be enough for better quality, you can put a camera with a 2 MP matrix. The difference in price will be small, and the clarity of the picture will increase.

Nobelic NBLC-3130F-WSD is one of the most affordable models for organizing surveillance at the entrance of a residential building. It has a built-in Wi-Fi module with an external antenna for signal amplification. Its body is reliably protected from moisture and dust, which allows you to place the equIPment even in the open air. The presence of infrared illumination will allow you to observe the territory even in the absence of normal lighting. Shooting resolution 1280 × 960 pixels, 1.3 MP matrix, which is enough for a good view within three meters of the lens.

Ivideon Dome is another inexpensive solution for those who want to install a camera at the entrance of a residential building. Its 2 MP matrix records in 1920 resolution × 1080 pixels, which provides a good view up to 5 meters. Increased clarity can be useful to see the details of what is happening. Night vision mode and field of view at 114 will allow continuous shooting over the entire area.

Camera in the entrance

Social button pressed RU “

Odnoklassniki social button pressed RU “

Installing a camera in an entrance has several aspects: legality, type of device and installation rules.

Camera at the entrance to the entrance

Placing a camera outdoors is more complicated from a legal point of view. First, you need to hold a meeting of the residents of the house, including the owners of all premises in the residential complex. At the meeting, it is necessary to agree on all the technical issues, as well as the areas where the cameras will be installed. Here you need to digress and say that usually surveillance is installed in a comprehensive manner in all the necessary areas. Obtaining all documents is a rather laborious process, so the council of each chamber holds a meeting is unlikely to succeed.

For the installation of surveillance to be legal, the consent of 2/3 of the residents of the house is required. Also remember that such surveillance is always the common property of all residents of an apartment building.

Making surveillance effective: WDR

This feature helps the camera perceive dark objects, such as a person’s face in front of an open door. If a figure is standing in front of a bright light from the street, conventional cameras will record it as a dark silhouette. WDR will make it so that the brightness is adjusted smoothly, and not along the brightest part of the frame.

Cameras with this feature process each frame in low light by combining multIPle shots with different brightness, thus brightening dark areas.

Form factor or body type

Outdoor cameras are available in dome or cylindrical housing. Dome is usually used for fastening to the ceiling, and cylindrical for fastening to walls. Due to their design, domes are more durable, especially if they are in an anti-vandal case. The cylindrical ones are placed on a leg, it is not so reliable when it comes to meeting with an intruder. But the installation of a cylindrical chamber is many times easier.

The Nobelic NBLC-2230V-SD is an excellent vari-focal dome camera protected by IK10 housing and night vision mode. The varifocal lens allows you to adjust the angle of view during installation. This is a great way to narrow your camera’s field of view to the minimum needed. Thus, you can increase the quality of shooting in the required space and cut off unnecessary areas, for example, walls that fall into the frame.

Legality. Vault

You can connect your surveillance system to local storage or to the cloud. Local storage is not as reliable as cloud storage, since the hard drive with the recording is located in your apartment. In theory, criminals can take out or spoil the media if they get inside. This method of storing information is justified if you do not have the opportunity to give the camera access to the network or if you have a security room with a monitoring panel.

In most cases, it is much easier to connect a camera at the entrance of a residential building to a cloud service. The recording will be stored on an encrypted server and you can access it from any device, wherever you are. Ivideon cloud service offers many tariffs for individuals and legal entities. You get a high level of security, the application will inform if movement appears on the camera.

To save space on the drive, you can choose a camera with a motion sensor or connect the function of recording only by motion in the frame on the cloudy Ivideon service. Thus, less space is required for recordings, and viewing the material will be much faster and more productive: you do not have to revise many hours of recordings to find the right moment.

The Nobelic NBLC-3130F-WSD model supports motion sensor function, it is designed for outdoor use and can be connected to the network via Wi-Fi. If you do not know how to organize observation, then you will not have any problems with it. Simple installation and setup.

BYRGPUB.COM 2021