What is it for and how to install a rear view camera

This article is devoted to one of the elements of traffic safety. rear view cameras. Why you need it and how to install it correctly, we will tell you below.

Purpose and benefits

Rear View Camera. universal accessory. Its main task. real-time display of what is happening behind the vehicle. Thus, the driver can NOT turn around to look for obstacles in the reverse path or an attempt to unauthorized access to the car or car supports.

Such cameras are included in the mandatory kit of a truck driver, a car with a trailer. It is better to install the equipment at the “geographical” center of the car or trailer. The location provides an excellent viewing angle for the driver, but at the same time makes it vulnerable to thieves. And the miniature dimensions are suitable for mounting on the rear bumper or inside the license plate of a vehicle or trailer.

Installing a rear view camera

Another advantage of the rear view camera. the presence of markup. This feature allows you to park your car in a short time without harming others. Using a camera without marking requires a lot of experience in operating such devices.

Of the shortcomings. most devices in the lower and middle price segments perform very poorly at night. Only some devices have an infrared mode. And clear models are expensive.

Device and principle of operation

The package consists of the camera itself, an LCD display and connecting cables. The monitor is installed on the center console or dashboard at the driver’s eye level, but so that it does not interfere with the view of the front traffic situation. In the inactive mode, the image is invisible from the camera, the mirror surface of the liquid crystal screen reflects light. But when starting reverse gear or starting the engine, it displays an image of the traffic situation in the back.

View from a rear view camera

The quality of the transmitted image depends on the light sensitivity of the camera’s sensors. In expensive models, they use their kind of CCD, and in inexpensive CMOS. If you choose, you can overpay for a device with more sensitive CCDs. It makes the image more realistic, especially in dark alleyways.

The device is powered by the standard wiring of the car or towbar. The camera turns on automatically when the transmission is shifted to reverse and parking maneuvers begin. The driver comfortably observes virtual parking lines and estimates the distance between cars for an optimal fit. If necessary, the rear view is activated in a couple of simple movements.

Installing a rear view camera

Take a hatchback car as an example. But this instruction applies to sedan, station wagon and SUVs. Only here is a remark. the procedure depends on the characteristics of the vehicle. Recommendations for preparation, selection of the best mounting location are contained in the official user manual.

Traditionally, there are two mounting locations for the device. First. near the vehicle license plate lamp on a plastic rim. The advantage of this method is to improve the light sensitivity and image of the device. However, against the background of white numbers, she will be quickly noticed and resisted. And in the interests of the driver. hide such a thing out of sight. Therefore, the installation process is focused on the light holding bar. And the probability of finding a miniature device is reduced to zero. All the necessary torments the bumper with a drill.

First stage. preparation of the working site. For a while, it is necessary to empty and clean the trunk and remove the strip with the license plate. Along the way, it is better to rinse them, and vacuum the compartment. It may even be necessary to remove the trim around the lock.

The driver will see a wiring harness visible through the left hole. You just need to remove the rubber plug from the socket and cut the harness. Now you need to lead the wires from the device through the holes of the number holder and direct them into the trunk through the same plug.

Installing a rear view camera on a car

Next comes the stage of connecting the red wire from the camera itself to the standard car wiring. On the left side, the boot lining hides the wiring block. The camera wire must be connected to the white-orange cord from this kit.

The scheme is as simple as two times two. It is necessary to Disconnect the block, connect the cord to the pin of the white-yellow cable. Solderless technology will NOT void your wiring warranty. After snapping the block, plus the reversing light, it will supply voltage and display the picture from the camera when the back mode is turned on.

The remaining wires are led under the same panel to the rear left door. Remove the seal between the ceiling and the trim and guide the entire harness to the front panel. To bring wires to it, remove the casing. In the salon, everything remains in place. The process is over.

Life hack from AUTOSOVETOV

To save time and reduce the chance of losing wires, use the services of an assistant or assistant. Be careful when removing the trim. only the upper part of the door seal and the left side of the luggage compartment trim must be removed. Remember that the seal is held on the shock absorbers, which blocks its complete removal. And hide the excess wires that will only interfere in the lighting shade.

How to install a rear view camera on a car yourself

In the bustle of the city, a huge stream of cars and people, mirrors are not always effective enough and it becomes necessary to install a rear-view camera. This device allows you to increase the visibility for the driver, thereby preventing possible problems on the road. You can install the camera yourself, saving money. It will NOT be difficult to mount the camera.

Choosing a camera

Everything here will depend on personal preferences and capabilities. Whether you want an expensive brand-name camera or a mid-range device. Most importantly, be sure to take a guarantee check, which will indicate a guarantee for at least a year. Expensive, of course. Doesn’t mean the best, nevertheless, try, if possible, to choose NOT too cheap models, so that you are more comfortable from using a high-quality unit.

There are several types of cameras, namely two:

So, a wireless camera is easier to install, which is called less wires. Less problems, however, this type of camera is not always compatible with a radio tape recorder, so it is better to consult a specialist on this issue.

Functionality required for comfortable use of the device:

Choosing a location for installation

When choosing a place to install, pay attention to the following points:

Some drivers install a camera in place of the rear license plate light, and this is a good option. It happens that the car already has a place for the camera. If the car is a truck, an acceptable option is the car roof. True, in this case it will not be very convenient to look after her.

When properly mounted, your device will cover inspection areas, inaccessible mirrors, which is undoubtedly very good for safety.

Installing the camera step by step

When you mount your camera yourself, it usually involves the following simple steps:

Minor difficulties can arise with wires. But they are usually tucked away neatly for a more aesthetic look.

How to install the camera in place of the license plate light

Some car models suggest installing a camera in place of a lamp that illuminates the license plate. Then you need to proceed as follows:

How to install a camera on a lighting panel

You can also place your camera below the lighting. But this is very inconvenient and NOT aesthetically pleasing, since then the camera will be very noticeable against the background of the license plate. It is better to fix it on a plate with lighting lamps.

To do this, do the following:

Installing the camera in place of the trunk lock

You can install your camera in the place of the trunk lock, provided that the shape of the camera allows it: the device itself is small, threaded and looks like a door peephole.

Then proceed like this:

This camera arrangement has a number of advantages: it is less prone to dirt, almost invisible, and has a good viewing angle.

By installing the camera yourself, you will undoubtedly save your money, which is very nice. Also, the rear view camera justifies the money spent on its purchase with your comfort and greater safety of movement in any environmental conditions.

Easy installation of a rear view camera on a car with your own hands. And again Kia Rio

Greetings, dear readers! Now we will continue to experiment with the installation of additional equipment in a passenger car. And the topic of the article will sound like this: do it yourself installing a rear view camera on a car.

specifically, we will be installing a universal camera, which is suitable for all brands of cars, on a small Kia Rio of the author of the blog. I think that this direction will be interesting to many lovers of comfort while driving.


So, let’s say right away that our camera is not a model one and it can be put, if you want, even on a tractor. The second point, in which it must be said, is that She was not bought separately, but came complete with a mirror based on Android, in which they spoke in great detail here.

The indisputable advantage of just such a non-model peephole is that it can be placed exactly in the center of the rear of the car. This arrangement, in contrast to the ceiling, allows you to make the camera’s viewing angle more uniform. But on the other hand, it is more accessible to vandals.

In general, in this moment, everyone must draw their own conclusions for themselves, but we immediately proceed to demonstrate the operation of the entire system:

And it all works as follows. When you turn on the reverse gear, a picture from the rear of the car is automatically displayed on the mirror screen, already with parking markings:

And now a side view:

A big plus is the fact that when reversing, the machine lights up the built-in LED backlight:

The general view looks like this:

In the normal mode (when moving forward), the DVR application constantly writes an image from it, which can always be viewed on the mirror display:

Now with regard to the sensational question of the dust and moisture protection of such a camera from the Middle Kingdom. Well what can I say at the moment, Based on my personal experience of operating it?

install, rear, view, camera

It was installed at the end of autumn 2015. As you well saw, this peephole is located on the outside of the car. At the time of this writing, no issues have been reported. Only wiped dust off a couple of times.

Therefore, God forbid, that everything will continue to work so well and bring pleasure to its owner. The only thing that immediately did NOT like in the mirror as a whole was the crooked translation of the programs. But we have already fixed this:

In general, my friends, let’s move on to the very installation of a rear-view camera with our own hands on our experimental car. Let me remind you once again that he is the kid Kia Rio in the hatchback body.

So, the whole process begins with the obligatory partial disassembly of the luggage compartment. There you need to remove the casing near the castle, and also remove the polic itself:

And here comes the first important point. In the picture above, pay attention to the wiring harness, which is circled. Remember its location, it is through it that we will lead the wires from the camera itself. This is how it looks:

Now we unscrew the license plate and see such wonderful holes in the bumper:

I think that now the further course of events has become clear to you. We take the wires from the camera and carefully pass them through the mounting frame of the number. Then we run them into these holes, and then we put them into the trunk through the plug:

The picture above is a top view. Look carefully at what should be the result. Naturally, after all the manipulations, it again squeezes all the wiring harness well so that moisture does not penetrate into the trunk.

Now we need to remove the left side trim. To do this, unscrew all the screws at the bottom:

And then gently pull the panel itself towards you:

Now watch closely. In the space that opens, we will see a block with wiring (picture above). So, the red wire from our rear view camera needs to be connected to the white-orange wire in this block.

To do this, disconnecting the same block and insert the red one into the pin with the yellow-orange guide. After that, we snap the block again. As you can see, there is no soldering, which means no warranty loss:

Thus, we supply voltage from the plus of the reversing light, so that the image is automatically displayed on the mirror display when the reverse gear is turned on.

But then everything is much easier. Under the same panel, we start the wires from the camera to the area of ​​the rear left door, remove the sealing rubber band between the ceiling and the trim, and lead the entire harness to the front pillar. Here’s a general outline:

I will repeat once again that there is no need to disassemble anything in the cabin. Just remove the sealing gum and that’s it. And already in the bow, you need to remove the front pillar trim to run a wire under it:

Once again, it is worth saying that you need to be careful when removing the skin, since it is attached to a kind of shock absorbers, which does not allow it to be completely removed.

Therefore, gently pull only the very top at a 90 degree angle:

Then we hide the plait under the ceiling and bring it to the mirror itself. To get rid of the rest of the wires, I recommend removing the lighting shade and packing everything discreetly in the opened space:

Well, friends, on this our simple installation of a rear-view camera on a car with our own hands came to an end. As you can see, there is nothing complicated or very clever in this process. Everything turned out to be very simple.

Install a rear view camera in the car

While a rearview camera is usually standard on modern vehicles, it can also be installed on almost any vehicle. The type of car is not as important as the displays you have, which can make the rear view camera easier to operate. For example, many DVRs and headunits will allow the use of a reversing camera, so be sure to check the compatible hardware you may already have before choosing a camera.

If you don’t have an existing screen to use, or would rather NOT mount the camera on a permanent base, there are also several different types of rear camera with more temporary screen mounting options.

Installing any rear view camera is usually quick and fairly straightforward, as long as you are comfortable stripping off a little interior trim and routing, removing, and connecting multiple wires. Connecting the camera to an existing host or second display can be a little tricky, though if you can follow the instructions that came with your kit, that’s all it really takes. It’s a little more patience. You usually don’t need to drill holes in your car as you can run wires through existing conduits and depending on whether you decide to solder wires or install plugs, you can also make your rearview camera detachable.

The first and most obvious place to start when deciding where to install your rear view camera. This is the back of the car. Try to install the rear view camera in such a way that it does NOT obstruct or interfere when opening the trunk of your car.

For this article, we will be using a rearview mirror mounted camera, although (as we mentioned) there are also many other rearview cameras available. To suit different displays, placement and mounting methods.

Begin the installation by securing the mirror monitor above the rearview mirror and extending the cable to the headliner. The monitor needs a 12 volt ignition supply, which can be found near the mirror or in the dashboard and located with a test light or multimeter.

There are cameras where the yellow plug is for the video stream from the camera, and the white plug opens the option for a second camera if needed. As we noted earlier, different cameras will have different wiring, so be sure to carefully read the attached wiring information for your specific device.

If there is a power source near the mirror, route the cable along the roof lining and down the pillar using the video signal cable. The 6m signal wire should run at the rear of the vehicle, so find an easy (but protected) route under carpets and dashboards. Until you reach the trunk or rear doors. Make sure you DO NOT pinch the wiring or route it in such a way that it could be stretched or damaged over time.

Now set the camera as you want; Recommended location. Dot above the license plate. Doubly Make sure nothing obstructs the camera’s clear view back. AND NOT by installing the camera too low or in places where it may collide or move when accessing the rear of the vehicle.

Pass the camera wire to the inside of the car by drilling a new hole; or Using the existing license plate light hole, if possible. Two supplied screws and double-sided tape hold the camera in place.

The camera requires 12 volt feedback to power the camera and monitor when reverse is selected. This power supply is easy to connect, just look for the reversing light in your taillights and use a test lamp or multimeter. To determine which wire is positive.

After all plugs are connected and power connections are made, it’s time to test and set up the camera. Make sure the parking brake is on and turn on the ignition. Shift the gear to reverse, and if everything is properly connected, the image will appear in your mirror.

Your new rear view camera setup will complement your parking skills and greatly enhance the safety of your vehicle.