iPhone 8 and iPhone X SIM card, how to remove

SIM insertion and removal instructions can help with problems, activation errors, internet connection problems, and blank frozen screen.

Do not try to remove the SIM card while the device is on. This could damage the SIM card or device.

Remove the SIM card tray from the right edge of the device. Use the SIM eject tool (or paperclip) to unlock the tray by inserting it into the slot provided.

Remove the SIM card from the SIM card tray. If applicable, see Inserting a SIM card.

iPhone 8 and iPhone X SIM card how to insert

SIM insertion or removal instructions can help with activation problems / errors, browser connection issues, and blank frozen screen.

  • Do not try to insert a SIM card while turning on the device. This could damage the SIM card or device.
  • Do not alter or alter the SIM card.

Remove the SIM card tray from the right edge of the device. Use the SIM eject tool (or paperclip) to unlock the tray by inserting it into the slot provided.

Insert the SIM card into the SIM card tray. Insert the SIM with the Verizon logo and SIM number on top (gold contacts facing down).

Insert the SIM card tray. Press down on the tray to lock it in place.

iPhone 8 and iPhone X SIM card, how to insert and cut

So you’ve just bought a new iPhone, what’s the first thing you do? Well, of course, insert your SIM card. It’s a simple task, but if you take a SIM card from an old phone, you cannot use the new nano SIM card format or the SIM tray into which you have to insert this SIM card. How to insert a SIM card into an iPhone X?

First, you need to make sure you have the correct SIM card.

Since you need the smallest nanometer-sized SIM, you can go to your carrier to have your SIM cut off or replaced with a new one, or you can do it yourself by following our easy step-by-step guide.
Once you have a SIM card of the right size, you will need a tool to remove the SIM cards (a paperclip or security pin will work too).

With all of these tools, you’re ready to get started. Follow these steps to change or insert a new SIM card in iPhone X, iPhone 8, and iPhone 8 Plus (The same applies to the SIM card in iPhone 7, iPhone 7 Plus, iPhone 6s, iPhone 6s Plus, iPhone 6 and 6 Plus. iPhone SE and earlier iPhone).

iPhone 8 and iPhone X SIM Card How to Crop

As smartphones get thinner and more compact, every excessive fraction of an inch is cut to make room for tight-fitting components.

One such device is the SIM card: Companies with Apple at the forefront pushed SIM miniaturization, and we quickly switched from a regular SIM (technically known as a “mini-SIM”) to a microSIM standard. and in recent years. to the nanoSIM card standard.

insert, card, iphone

iPhone X SIM

Don’t worry if you only need to cut out a small portion of the colored part. just don’t go too far. The result may not look as pretty as you could get with a dedicated SIM cutter, but if you really need to get it done quickly, you can do it yourself.

How to choose the size of the SIM card

If you have been using the same SIM card for a long time, it probably has standard dimensions of 25 x 15 x 0.76 mm. However, modern phone models, including iPhones, have switched to smaller format SIM cards:

  • micro. 15 x 12 x 0.76 mm;
  • nano. 12.30 x 8.80 x 0.67mm.

Older iPhone 3Gs and 3Gs use a standard format SIM card. However, models 4 and 4S require a micro-SIM, and the iPhone 5 and beyond are already designed for a nano-SIM card, practically consisting of only one chip. You can set the size of the SIM-card without looking at the model, according to the size of the slot for it.

To get a card of the required format, you should contact the communication salon of your mobile operator: there you will be given a new SIM card with the ability to break off its edges to the desired format (micro- or nano-). In this case, your mobile number will remain the same. This service is usually provided free of charge. In this case, the old SIM card is blocked.

Some craftsmen cut their existing SIM-card to the desired size on their own using stencils (they can be found on the Internet). However, this does not always go smoothly: there is a risk of damaging the chip or cutting the edges of the card unevenly. After inept manipulation, the card can get stuck in the tray and prevent it from opening. Therefore, we do not recommend that you conduct such experiments at home.

How to insert a SIM card into an iPhone

The question of how to insert a SIM card into an iPhone may seem irrelevant: if you buy a SIM card, the employees of the communication salon usually offer services to activate it and insert it themselves. But if you nevertheless decide to do it yourself or while using the iPhone, replace one SIM card with another (or insert an additional one), you may encounter problems:

  • search and open the tray for the SIM card;
  • fitting the SIM card to the required format.

How To Insert/Remove Sim Card From iPhone 6 and iPhone 6 Plus

Inserting a SIM card into the tray itself is simple, but for a beginner user, and this can cause certain difficulties.

How to find and open a SIM card slot in iPhone

Finding and removing the SIM card tray is often difficult. We are used to the fact that in old mobile phones the SIM card is inserted into the slot located directly under the battery. However, modern phones have a different design. The tray for the SIM card is almost invisible in them. And to open it, you don’t have to remove the back cover and take out the battery.

In the latest generation iPhones, the SIM card slot is located on the right side of the case (approximately in the middle). On older models, it may appear on the upper edge of the case, next to the “Enable” button. Looking closely, you will see a tray cover with a small hole.

The hole is like a keyhole: the tray can only be removed when in use. Usually, when you buy an iPhone in a box, you also find a thin metal wire key. If you insert it into the hole of the plug, it will slide out, after which you can easily pull out the slot itself.

If the key is lost or for some reason your iPhone was not equipped with it, you can take a small paper clip and, unfolding it on one side, use it instead of the key. she will successfully replace him.

How to insert a SIM card into an iPhone

Once you understand the location of the slot and the format of the SIM card, you can easily insert or remove it. The algorithm of actions is simple.

  • Disconnect iPhone if it was turned on.
  • Insert the key into the hole of the SIM card slot.
  • Push the key down. This action does not require any force: a little effort is sufficient.
  • The slot will pop out slightly. Hook it up with your fingers and gently pull it out of the iPhone.
  • Remove the old SIM card from the tray (if it was there).
  • Insert the SIM card into the slot. The notches in it will tell you how to do it right. In case of doubt, check yourself: the SIM card contacts in relation to the surface of the slot should “look” down.
  • Reinsert the tray gently and push it back.
  • Turn on your iPhone. If you inserted a new SIM card, now is the time to start activating it and setting up the device.
READ  How to charge an iPhone as a percentage

If the iPhone is working properly, you can easily do these manipulations and insert the SIM card into it yourself. If something does not work out (most often the tray does not slide out), contact the service center. And to begin with, under the pretext of replacing the SIM-card, you can come to the cellular salon. Operators will help you insert a SIM card and report a mechanical failure of the tray, if any.

How and where to insert a memory card into your iPhone

We have all heard that there are memory cards for the iPhone. Let’s figure out how and where to insert a memory card into an iPhone if there is no slot for it? So. Firstly, a Micro-SD memory card cannot be inserted into an iPhone or any other apple gadget in any way. Unfortunately, this is true, because the difference in cost between the iPhones of 18 GB and 128 GB significantly exceeds the amount that could be given even for a 128 GB memory card. Well, memory is always very necessary for all of us. Where are we to cram new games, applications, photos, music and other extremely important things? We urgently need to do something about this.

What are the options? Of course, the easiest way to add free space to yourself is to remove unnecessary programs, clear the cache, and so on. We examined this option in more detail HERE. I highly recommend this article to you about Honor if you have a need to get precious megabytes of memory on your i-device.

The second way is lightning sticks. Of course, they have limited functionality, but you can use it. Such flash drives are sold not only for 16 GB, but also of much larger capacity. up to 256 gigs! Now you and I know that an ordinary memory card cannot be inserted into an iPhone. The answer is obvious. How and where to insert a memory card into an iPhone. ANYWHERE.

But do not blame Apple for this and say that all companies produce smartphones with slots for memory cards, but Apple does not. The latest flagship devices of the same Samsung (for example, the Galaxy S6 Edge) also lack such slots. Alas, this is so. It’s sad to admit it. Maybe soon Yablochniki will come up with a place for the SD. Wait and see.

Conclusion: if you have room for a map, then most likely it is a Chinese replica. It has nothing to do with real branded products.

  • iPhone turned off and won‘t turn on What to do?
  • How to downgrade from iOS 10 to 9? What do we have to do?
  • How to unlock your iPhone if you forgot your ID and it’s locked?
  • How to create yourself an Apple ID Apple ID
  • How to jailbreak iOS 7.1 2 iPhone 4
  • vShare for iPhone free download in Russian

What to do if there is no special Apple branded key in your iPhone box

If you find that you do not have this key, you will have to call on your wit to help. Note that the idea of ​​using a needle to open the SIM card tray must be urgently dismissed. Otherwise, you risk damaging the tray fixing system. As a rule, experienced iPhone owners use an ordinary paper clip for these purposes, having previously unfolded it. However, some inventive individuals manage to adapt a dental probe or a thin awl for these needs.

How to insert a SIM card into an iPhone

Most of the newly minted Apple smartphone owners face a small problem. Often, users do not understand how to insert a SIM card into an iPhone correctly so that it works smoothly and without interruptions, since its structure is significantly different from ordinary mobile phones. In fact, you can insert a SIM card into your iPhone of any model quite simply and quickly, for this you just need to carefully study the structure of the device and choose the right SIM card for it. These points are worth considering in more detail.

Choose a SIM card based on the generation of the iPhone you purchased. The owner of the gadget will be able to find this information in the user manual that comes with the device. As a rule, smartphones of the 4th series (and earlier) need a micro SIM card, for the latest models (5 and 6 series) it is the smallest one. nano SIM card. Therefore, you will not be able to insert a SIM card into the iPhone if it is ordinary. Although modern manufacturers of such cards have provided a special perforation on their surface, which will facilitate the process of resizing the card for users.

Before inserting a SIM card into an iPhone, you can prepare it for this in different ways. For example, you can cut it yourself for your device, use special “scissors” for SIM-cards, or simply replace it in a communication salon. The most difficult task will be to cope with this task for the owners of the most modern “apple” smartphones. the fifth and sixth series. After all, in order to insert a SIM card into the iPhone, it will need to be cut as much as possible without damaging the important chip, and in addition to reduce the thickness of the plastic of the SIM card by grinding it off with a sandpaper. Therefore, it is best to entrust this matter to specialists.

If you need to insert a SIM card into the iPhone of the fourth model, then you can simply cut it along the outlined boundaries using sharp scissors or a blade. It is worth making the incision slowly and carefully, otherwise the damaged SIM card will simply not work and all that remains is to throw it away. It is best to start from afar, gradually getting closer to the desired boundaries. It’s also important to provide yourself with good lighting.

If you managed to trim correctly, then you can safely insert the SIM card into the iPhone. A special key supplied with the device will help you get into the slot created for it. It is inserted into a hole on the surface of the gadget and slightly pressed against it. After such a press, the slot is pulled out, into which the SIM card is inserted. All that remains is to put the SIM card correctly, and then install the slot back into the smartphone. If the user did everything according to the correct scheme, then the phone will detect the network and can be used as usual.

Sometimes there is such a situation that the user cannot insert a SIM card into the iPhone due to the loss of a special key. In this case, the best solution would be to borrow a similar accessory, ask for help in a communications salon, or replace it with the most ordinary, slightly unbent paper clip. The main thing. press the hole on the surface of the iPhone with it as carefully as possible so as not to damage or ruin the gadget.

READ  Is it possible to distribute the Internet from an iPhone

What to do if the SIM card is stuck

Uh, the slot seems to have been opened, but the SIM-card itself still does not want to go out. This means that you will not only have to decide how to remove the SIM card from the iPhone 4S, but also deal with the problem of removing the stuck SIM card. Yes, yes, and this can be comprehended by some fans of “apple” smartphones. Fortunately, this phenomenon is not widespread.

It is quite logical to want to contact a service center with a problem, where they will solve it, taking a tidy sum for it. Do not hurry! Try to do it yourself.

When the SIM card is stuck, the slot is extended by only a couple of millimeters. To remove the SIM card, craftsmen advise using something thin but durable. A model knife or folder film is perfect. You just need to shove them between the phone case and the slot on the side of the screen. Then it remains only to pull out the plate together with the slot, pressing it against the screen.

If it doesn’t work the first time, don’t despair. This procedure requires skill.

Step-by-step instruction

Turn off your iPhone first. Like any complex synchronized technique, Apple’s smartphone likes everything to be done solely according to the instructions. In order to turn off the device, press for 5 seconds on the power button located above the display on the bypass of the case. Slide your finger across the “Slide to power off” message that appears on the screen to turn off the iPhone.

Next, you need to find an external SIM card slot. Unlike its predecessors, the iPhone 4S has it on the right side. Here you will fully feel the seriousness of the question of how to get a SIM card out of the iPhone 4S. It is impossible to do this with naked hands.

Today, Apple usually includes a special key with the iPhone that fits into a small hole in the slot and makes it pop out, allowing access to the SIM card.

Advice

The full operation of each mobile phone begins with the same ritual. inserting a SIM card. Without this piece of plastic with a built-in chip, the phone turns into a calculator or a player, and in especially difficult cases it does not turn on at all. However, there are situations when it becomes necessary to remove the SIM card from the phone. For ordinary cell phones, to get out the SIM card, you just need to remove the back cover and take out the battery. Specialists from Apple once again decided to remind about the uniqueness of the products manufactured by their company, and applied the method of installing a SIM card into a special slot using a tray. This method does not require partial disassembly of the phone. This is where people start to think about how to get the SIM card out of the iPhone 4S?

Paradoxically, many, faced with such a problem, immediately run to the nearest service, where specialists are helping them for quite decent money. Few people think that you can do all this yourself at home, without even damaging your expensive iPhone.

Preparing for the first launch

The first thing a happy iPhone owner needs to do is turn off the device by holding down the power button. You can also open the slot “for profit”, however, in this case, the likelihood of failures in further work dramatically increases; it’s better to be patient and act strictly in accordance with the manufacturer’s recommendations. fortunately, it’s as easy as taking a screenshot on an iPhone.

Important: You can insert and remove a SIM card into an iPhone without opening the cover of the device. For the owner of the phone, it is enough to follow the simple instructions given below. and not to climb without the need for a rather complex system of loops and radio components.

The power button is located, depending on the model of the device, on the upper end (older versions) or at the top right (more modern). You need to hold it until you are prompted to turn off the phone. after which, after waiting until the screen goes out, proceed to further manipulations.

How to put a SIM card in an iPhone

To get the sled on which the card is installed, use the special opening key located in a thick envelope.

Preparing for the first launch

Preparation for the initial launch of the iPhone consists in unpacking and visual inspection of the gadget. After unpacking the box, make sure that it contains all the components of the kit declared by the manufacturer, namely:

  • a smartphone packed in a plastic protective form;
  • sync cable and power adapter;
  • an envelope made of thick white paper with a needle for opening the SIM card slot;
  • Apple Airpods headphones;
  • decorative elements;
  • headphone adapter.

Before starting, pay attention to the controls of the gadget. On models “5” and “SE” the button responsible for locking the phone screen and turning it on / off is located on the top edge of the device. On “six” and newer models, the lock button is located on the right side of the smartphone.

On the left side panel there are volume controls and a quick switch to silent mode.

The Home button is the main one when working with the device; located at the bottom of the front of the gadget; allows you to switch between tasks, go to the main menu, call the voice assistant Siri.

The models of the families “5”, “6”, “SE” are equipped with a standard headphone input of the “3.5” type. Starting with the “seven”, there is no such connector. the headphones are adapted for the battery socket, that is, you can insert old Airpods or third-party headphones only using the original adapter from the kit.

Now that the educational program on the controls has been carried out, you can proceed to the tips for installing a SIM card.

Turn on the smartphone

Then immediately hold down the power button to turn on the device. Although there is no need to turn off your iPhone for the procedure, it will be more convenient to do this with the device turned on. Usually the network is detected automatically, only in rare cases it is necessary to additionally activate the SIM card.

Interestingly, in the iPhone XS Max model, released specifically for the Chinese market, the slot is designed for 2 nano SIM cards at once.

Installing a SIM card

After removing the tray from its slot, place it on a flat, horizontal surface for easy installation. Please note that in iPhones, the SIM card slot can be completely removed from the device, which means that when inserting it back, you need to be careful so that the sled does not fall out or get lost.

READ  How to Unlock iPhone 7 via iTunes

Each SIM-card has notches on one of the corners, along which you need to navigate during installation. The recess in the slot will prevent the card from being inserted incorrectly. The contacts (chip) must face down. You can return the tray to its original place in only one position, gently push it inward until it stops.

What size do you need

Standard SIM cards of large size (rarely used in modern smartphones) are suitable only for models of the first generation 3G and 3Gs. Owners of second generation iPhones (4 and 4s) can use micro SIM. All subsequent models use nano-SIM. the smallest of all. Its dimensions:

  • length. 12.3 mm;
  • width. 8.8 mm;
  • thickness. 0.67 mm.

It is best to get SIM-cards of the required size in the official center of the mobile operator, so as not to unknowingly damage the chip in an attempt to do it yourself. Perhaps this is just for receiving a micro-SIM. Nano-SIM is a different type of SIM, in which the chip itself is smaller, so even if you completely cut off the plastic part, you will not be able to insert it into the iPhone. Although there are craftsmen on the network who managed to cut a standard SIM card with scissors or a special stapler. It is not recommended to repeat their experience if you are unsure of your abilities.

Cards of the required size are issued on the same day without changing the number. Replacement fees may apply depending on carrier.

Preparing to launch iPhone for the first time

Immediately after purchase, you should take the phone out of the box and inspect it. First of all, attention should be paid to the package bundle, which will always be the same if the phone is legally purchased from authorized dealers. The box should contain:

  • a smartphone in a protective plastic Lenovo form;
  • Charger;
  • USB cable for media synchronization;
  • a needle for opening a slot;
  • original Apple Airpods headphones;
  • headphone adapter;
  • decorative details (optional).

Also inspect the device for external controls. For example, the screen lock button for iPhones 5 and 5s is on the top, while for the six and seven it is located on the right side of the phone. On the left are the volume control keys and a quick switch to silent mode. The main way to control the device is the central button located at the bottom of the front side of the smartphone.

Different models have a different type of headphone input. Models 5, 6 and SE have a standard 3.5mm input, while iPhone 7 and all subsequent models connect to headphones via the charging jack. You can use ordinary headphones left over from old models only if you have an original adapter from the manufacturer.

What you need to open the SIM card tray?

The SIM tray itself cannot be opened without special tools. Xiaomi smartphones followed the same path, which also do not open without a special needle.

To open the SIM-card tray of the iPhone, a special key / paper clip is enough, which usually comes with a smartphone.

Nothing else, no need to open the tray.

Possible problems

Sometimes, after installation, the SIM card may not be recognized in the phone. The reasons for this behavior are quite varied, but in general they boil down to two main ones. incorrect installation or breakdown.

How to properly open the slot and insert the SIM card into the iPhone

Traditionally, the SIM-card in most phones is installed from the side of the battery under the cover, or into the hole on the side edges of the smartphone. For the first time, an unconventional method of installing a card was used in an iPhone. For this reason, it is still a mystery for many users how to insert a SIM card into an iPhone.

iPhone 6 / 6S PLUS HOW TO: Insert / Remove a SIM Card

What SIM card is needed?

Starting with the oldest models, the iPhone can use three types of SIM cards: Standard, Micro, and Nano. In modern devices, SIM cards are used only in the Nano format. They are the smallest.

Determining which card is needed for a smartphone is quite simple:

  • standard. all models up to version 4 (not inclusive);
  • micro. used only in iPhone 4 and 4s;
  • nano. all other models starting from version 5.

After the key and card are prepared, you can proceed to opening the slot and inserting a SIM card.

Technical difficulites

Breakdowns also happen, in this case any SIM will not be recognized by the iPhone. In such a situation, it is best to contact the service center to localize the problem and repair.

How to open the tray and insert a SIM card into an iPhone?

First of all, before installing or replacing a SIM card, you should find out where the slot for its installation is located. It can be located in two places. On the first iPhone and 3GS and 3G devices, it is located on the top bar.

On all other models, it is on the right.

  • Disable the iPhone. Why do you need to hold down the Power button or the lock key and wait for the “Turn off” inscription and select it.
  • Remove the protective bumper or cover from the phone.
  • We take the key and find the slot.
  • Carefully insert the thin edge of the key into the hole until the tray pops out.
  • Extract it.
  • Now place the card in the hole in the tray. Please note that it should fit with the contacts down. Those. “Look” with the non-contact side in the same direction as the iPhone screen.
  • Now you can install the slot in the phone and turn on the device.

It is worth noting that if you do not have a special key at hand, then you can use an ordinary steel clip or needle instead.

Incorrect installation

The most common option is incorrect insertion of the card into the slot. A similar problem can be provoked by a situation when the card is installed on the wrong side, i.e. contacts not down, but up. In this case, it is enough to change its location and most often everything will work.