How to go and configure ASUS F552 Laptop BIOS to install Windows 7, 8, 10 from a flash drive or disk. BIOS ASUS Setup

In different versions, the way to get into the BIOS on the Asus laptop, its own, so consider each separately.

Windows 7

Separately, it is worth noting the opportunity to go to the BIOS when the laptop is turned on.

If ASUS is equipped with Windows 7 or the XP version, then determine the type of bios and go to the main menu will help enter the command “MSINFO32”. You can set it in several ways:

  • Enter “msinfo32” in the start search string and then press ENTER.
  • Set a combination to start the Ctrl Shift Esc Task Manager or Ctrl Alt Delete, go to the “File” section and select “New Task (Run)”. In the window that opens in the input line to dial “MSINFO32” and confirm the OK button.
  • Press the key combination R. In the input row, enter “MSINFO32” and select the OK button.

As a result of the correct input of the keys, any of the ways will open a window with all data about the OS and the version of the BIOS used on the laptop. Next, you just need to select the desired keys under the installed type of bios. A good tip will be presented below the selection of buttons for logging in.

Simultaneous pressing one of these key combinations when booting Windows 7 or XP, opens the main menu of the bios.

Windows 8

First of all, you should make a competent connection of an external device, because to enter the BIOS menu on the ASUS laptop with the installed Windows 8, it will correctly use the UEFI settings.

To run the BIOS, you have to perform the following sequence of actions:

  • On the desktop control panel, select the option “Options” (Settings).
  • At the bottom of the open window to click “Changing Computer Parameters” (CHANGE PC SETTINGS.
  • In the menu that appears, select “General” (General), then click “Special Download Settings” (Advanced Startup), and after reboot now (Restart Now).
  • At the end of the reboot, you need to stop your choice on the “Diagnostics” section (Troubleshout).
  • In the window that opens, find “Advanced Options” (Advanced Options).
  • Next, select “UEFI built-in parameters” (UEFI Firmvare Settings).
  • Finally in the last window click on the Restart button (RESTART).

And if all the steps of step-by-step instructions will be observed, the BIOS will start immediately after the system is rebooted.

Windows 10

In the updated version of Windows 10, it is also possible to log in to the BIOS settings by setting the laptop command before it starts to reboot. You need to hold the SHIFT button, select the “Restart” section. Either at the system loading stage, press F2, after which the OS will switch to the bios menu.

General information on the input in the BIOS boot menu

Just like to enter the BIOS (or UEFI settings) when the computer is turned on, you must press a specific key, usually DEL or F2, also for calling a Boot Menu there is a similar key. In most cases, it is F12, F11, ESC, but there are other options for which I will write below (sometimes information about what you want to click to call Boot Menu immediately appears on the screen when the computer is turned on, but not always).

See also  How to connect Wi-Fi without password on Android

And if all you need is required. it is necessary to change the order of download and do it is necessary for some single action (installing Windows, checking for viruses), then it is better to use BOOT MENU, and not to install, for example, download from a flash drive in the BIOS settings.

In Boot Menu, you will see a list of all the devices connected to the computer, with which at the moment it is potentially possible loading (hard drives, flash drives, DVD and CD discs), and possibly the network load of the computer and start the recovery of a laptop or computer from the backup partition.

Repair Laptops ASUS for 1 day

Order repairs in our service center, and get a good device on the same day, with a guarantee to 1 year

Add a comment

Leave your question through the feedback form and the master will call you back and answer without imposing. or services.

How to start secure mode on a laptop on Windows 8

Windows operating system with labeling 8 has always differed by special capriciousness, so here the safe mode procedure is somewhat different.

In the Settings menu, select a tab indicated by General. Here you will find an additional diagnostic menu, through the optional parameters of which you can enter the download parameters and restart the laptop. After automatic switching on, your attention will be presented with a boot menu, one of the items of which is safe mode.

How to enable secure mode on Windows 10 laptop Read in the following article.


Depending on the manufacturer, inteeis BIOS is seriously different. However, it should not be scared: the procedure remains unchanged on all versions.

Unfortunately, the mouse in the bios does not work, so the navigation is carried out only with the keypad: arrows are used to move, and to select a specific parameter. Enter key. For a better understanding of the BIOS principle, let’s see how to change the priority of loading in two different intees.

Download to Phoenix-Award BIOS

If you have an old BIOS inteeis, then you need to go to the “Advanced Bios Features” section to change the download priority.

  • Find the String “Hard Disk Boot Priority” or “First Boot Device”.
  • Press ENTER and use the arrows to select “USB-Flash” (“Removable”, “USB-HDD0”, “flash drive name”).
  • To save the settings, click “Safe and Exit Setup” in the main menu.

After successfully installing Windows, you will need to repeat this operation, returning to the first place HDD (download from the hard disk).

Download to AMI BIOS

In Computers, the BIOS version is installed from AMI (although, more and more often manufacturers of motherboards put BIOS-e-country development).

  • Click the “BOOT” tab on the top panel.
  • Open the “Boot Device Priority” section.
  • Stand on the 1st Boot Device string and press ENTER.
  • Using the keyboard arrows, set the “USB” (or “CDROM” value if you install from the disk. There is no CD / DVD-ROM in the picture above, because it is not at all on that computer).
  • Press F10 and select the OK option to save the changes and exit BIOS.

windows, asus

Do not be afraid if you have a BIOS with another inteeis, and there are no tabs and sections described above. Just find the tab, in whose name is the word “boot”. Inside it, you will definitely detect the priority of the download, which can be changed by installing the USB-Flash device with a Windows distribution to first place.

How to go to the BIOS when you turn on the laptop

Depending on the manufacturer, the year of release and a series of laptop Log in BIOS can be different. Various keys or even combinations are used, and the messages on the screen with the indication of the desired may not be.

See also  Is it possible to restore the remote application on Android

It is better to check only one of the possible options at a time. If it does not suit, wait for Windows startup, restart the PC and try the other key or combination. Specify several options at once, since you can simply not get to the desired time interval.

Laptops asus

Most often to go to the BIOS while turning on the laptop, the F2 key is used. Less common options. Del and F9.

If it does not work, turn off the laptop, hush the ESC, and then press the power button. Do not let the ESC until the boot menu appears on the screen. In it you need to go to ENTER SETUP and press ENTER.

Laptops Acer

In Acer laptops, the F1 and F2 keys are most often used, as well as the Ctrlaltesc combination. The Acer Aspire series may require CTRLF2. In the Travelmate and Extensa rules to enter Bios, you usually need to press F2 or DEL. In the old models of Acer laptops, CtrLaltdel and Ctrlaltesc combinations can be found.

Lenovo laptops

To enter the BIOS on Lenovo laptops, you most often need to press the F2 key. On many ultrabooks and hybrid laptops, a series of F-keys can be activated only with Fn, and therefore it will be necessary to click FNF2. Where are the F8 and Del keys less often.

On many laptops companies on the side panel or next to the power button there is a special key to enter the BIOS. You can click on it only when the laptop is turned off.

HP laptops

To go to the BIOS on HP laptops, usually need to press the F10 or ESC key. But on old models, Del, F1, F11 or F8 may be required.

SAMSUNG laptops

In Samsung devices, it is most often for the entry in the BIOS to press F2, F8, F12 or DEL. In case of access to F-row, only the FN button will require an appropriate combination: FNF2, FNF8 or FNF12.

Sony laptops

VAIO series models can have a special Assist button. If you click on it while downloading a laptop, a menu will appear with the possibility of selecting Start Bios Setup.

In obsolete laptops, the F1, F2, F3 and DEL keys can be used.

DELL laptops

In the case of Dell laptops, the most common transition option to the BIOS is the F2 key. A little less often meets F1, F10, Del, Esc and Insert.

Features of the entry in Boot Menu in Windows 10 and Windows 8.eighteen)

For laptops and computers that were originally supplied with Windows 8 or 8.1, and soon and with Windows 10, the input to Boot Menu can not be received using the specified keys. This is due to the fact that shutdown for these operating systems is not in the full sense of this word. It is rather hibernation, and therefore the download menu may not open when you press F12, ESC, F11 and other keys.

In this case, you can do one of the following ways:

  • When choosing “shutdown” in Windows 8 and 8.1 Hold down the SHIFT key, in this case the computer must turn off fully and when you turn on the key to enter Boot Menu should work.
  • Restart the computer instead of shutting down and turning on, press the desired key when rebooting.
  • Disable fast launch (see. How to disable fast running windows 10). In Windows 8.1 To do this, go to the control panel (control panel. icons, and not categories), select “Power”, in the list of left, press “Power Buttons Actions” (even if it is not a laptop), disable the “Enable Quick Start” item (For this it may be necessary to click “Changing the parameters that are not currently available at the top of the window).
See also  How to install Android 10 on your Samsung

One of these ways must help with the input in the download menu, provided that everything else is done correctly.

How to enter the BIOS on windows 8 or

Open the miracle buttons panel, for example, by pressing the Windows C key combination. Click the “Settings” icon and select Edit PC Settings in the lower right corner. In the PC settings, go to the “General” tab and click “Restart Now” under the “Advanced Start” heading.

In Windows 8.1 steps are slightly different. In the PC settings, go to the “Update and Recovery” tab, then go to “Restore” and, finally, click “Restart Now” in the “Advanced Run” section.

Either holding the SHIFT key, click “Restart” in the “Shutdown” menu.

The computer will be rebooted in the download parameters that include UEFI BIOS. As in Windows 10, go to “Troubleshoot” → “Advanced Options” → “UEFI Fixture Options” and click “Restart” to download to BIOS.

Several parameters of the Base I / O system allow you to speed up the initialization process of such a device as ASUS laptop. The entrance to the BIOS at the same time, as noted earlier, will have to do several times. Immediately need to set the order device selection order. To do this go to the Boot menu section. In it, it is necessary to install exactly the hard disk as First Boot (the PGDN and PGUP or F5 and F6 keys are applied, right to use a hint how to perform this manipulation) on which the physically operating system is. The same parameter is sent before installing it or on a flash drive, or on a CD (depending on where this procedure comes from). The following boot sources (Second Boot, Third Boot) to eliminate misunderstandings should be disabled. Similarly, it is recommended to install and Other Boot. Next you need to turn off the output of the mobile PC manufacturer logo. It may hide important messages about the status of computer equipment at the testing stage. To do this, go to the Advanced section and find item Logo on. Its also by previously outlined methods change to Disabled. Then we save the changes and reboot the laptop. BIOS Loading on Asus Laptop After that, it will be visible to the crowd, and not hidden behind the manufacturer’s logo.

To do this, press the power button and before displaying the ASUS logo or the Window boot immediately start pressing the “F2” or “Delet” key.

If everything is correct, we will see BIOS, as in the photo.

Here is a brief description of the laptop, but we are not interested. Now the most interesting will begin.

Go to the “Security” tab.

Go down to “Secure Boot Menu” and go to this option. We see there.

And here we turn off the “Secure Boot Control”, that is, we rearrange with “Enabled” to “disabled”.

Further return to the initial menu, that is, before the “Security” tab, via the “ESC” key.

And go to the tab “BOOT”.

And here include the “Launch CSM” option. We do as in the photo.

After selecting, a window will appear with a warning that briefly says “what would the settings, or the option become active will need to be rebooted.”

Well, save the settings and reboot a laptop. Press “F10” and choose “Y (YES)”, click “Enter” and a laptop ASUS X751LA reboots.

Again, we enter the BIOS and go to the tab “BOOT”, there should be a new option.

Here I exhibit the priority of downloading from devices, in this example I set my flash drive, you can also put the drive to download.