Formatting a hard drive via BIOS: through a installation flash drive, console, Aomei, Acronis, Paragon

Hello! A hard drive is an important component of a computer, without which a person will not fully use the computer as intended. There are situations when during the operation of PC you need to format the disk through BIOS.

To implement the formatting of the drive is not from the Windows operating system, a clean disk or flash drive will be needed. Also, the computer should have a USB ports or DVD drive workers to read and record disks.

It is important to note that the BIOS (or its UEFI receiver) is a tool for launching operating systems. Additionally, this environment performs some other functions, but there is no tool for cleaning the hard drive here. Therefore, this tool is required to create on a separate data drive.

Methods

1) First you need to open the task manager (combination of Ctrlshiftesc or CtrLaltDel buttons).

2) Next, click on the “file/new task” menu. In the line “open” enter the DiskMGMT command.MSC and press OK. An example in a screenshot below.

Diskmgmt.MSC. team to open disks management

3) After the “Disks Management” utility will start (by the way, with administrator rights).

How to format a laptop hard drive

Wikihow works on the principle of wiki, which means that many of our articles are written by several authors. When creating this article on its editing and improvement, authors-volunteers worked.

Number of views of this article: 24 496.

Formatting a hard disk is necessary after buying an additional or replacing drive, or if a virus or a bad file clogging your computer is clogged. Formatting is required for drives used by all computers, but this article will only tell you how to format a laptop hard drive.

Go to the site of the manufacturer of your laptop and find updates of the drivers that you will need. They are usually located on support and/or loading pages.

How To Format Hard Disk Completely Including All the Partition in Windows 10

Download the latest versions of drivers available for your laptop and a specific operating system that needs to be installed. If necessary, you can use another computer to gain access to these files.

Write down the driver’s files for an external data storage device, for example, a CD-disk or a USB drive, because these drivers will be removed from a hard drive when you are going to format it.

Insert a Windows installation disk into your CD disk recovery. Reload your computer by selecting the “Restart” option in the “Turn Off Computer” tab.

Contact the user’s leadership to detect your “access” key because its location varies, depending on the manufacturer.

  • Check your BIOS settings to confirm the CD-ROM drive as a primary boot device. If necessary, select this option and click “Save” (save). Your laptop then should restart.

Select “Format” (formatting) and “USE NTFS File System” (use the NTFS file system) for those sections where it is necessary. This format is most compatible with the latest versions of the Windows operating system.

Let the installer complete the work by responding to the remaining system requests by the answer “YES, Continue”, or by choosing the desired characteristics.

When your computer reloads again, do not touch the keyboard based on the “Press Any Key to Reboot From CD” tips (click any reloading key) in order to allow your system to complete the installation process.

Remove the recovery/installation CD from your drive after the installation is completed. Your laptop should restart from your own disk, not from CD.

Ways to format hard drive

Through my computer

Probably a classic and easiest way to format the disk is to go to “My Computer” (or “this computer”, depending on the version of your OS). Find the desired disk section in it. Then select this section, press the right button on it and select the required (t in the context menu.e. Formatting, see. screenshot below).

Note: If the “My Computer” icon is not on the desktop, and you do not know how to open it, click the combination of Wine buttons. the conductor will open: on the left in the menu, select the link to “My computer/this computer”.

See also  Distribute wi-fi from phone to laptop

Format disc // this computer // Windows 10

Next, a window should be opened in which the main settings are set:

  • File system: FAT 32, NTFS, ExFAT, etc. In most cases, the most optimal option for a hard drive is the use of NTFS;
  • Distribution unit size: 4096 bytes (optimal option);
  • Tom Tag: the name of the disk, you can introduce any (I recommend using the Latinage, t.to. Some programs incorrectly read Russian font).

Settings when formatting the drive

In general, the default settings are usually suitable for most users-you can immediately click the “Start” button. After a few minutes, get a “clean” disk.

Through disk management

In those cases when you went into the “my computer”, and it simply does not see your connected disk (this is often the case with new disks that were not formatted). you need to use either special utilities or use the “disk management” tool. built.in in Windows.

To open disks management, you need:

  • press the combination of Winr buttons to open the “Perform” window;
  • Enter the DiskMGMT command.MSC and press Enter. The “Disks Management” application should open.

Next, you will see not only all connected discs, flash drives, memory cards, etc., but what sections were created on them. t.e. The whole structure. Choose the desired section, and click on it with the right button mouse. in the context menu, click on the “format. ” (cm. Red arrows on the screen below).

Disks management. selection of section for formatting

Next, it will be necessary to specify the volume mark (that is, the name of the disk), the file system and the size of the cluster. Then agree with the operation. Everything!

Through the command line

In cases where the conductor freezes (for example), also in the case of various kinds of errors, you can try to format the disk through the command line.

First you need to open it on behalf of the administrator. For this:

  • Open the task manager (combination of Ctrlshiftesc buttons);
  • Next, press the file/new task;
  • Enter in the line “Open” CMD, put a checkmark so that the task is with the rights of the administrator and click Enter. The command line should open.

Command line on behalf of the administrator

Next, you need to enter the command:

G:. The letter of the formatted disk (indicate carefully!);

Formatting of disk G on command line

In principle, the disk must be formatted.

In Windows 10, by the way, a small “error” may appear. the system will ask you to indicate the volume label for the disk, and then write that “the unacceptable disk mark is indicated” (although you seem to have indicated everything correctly, example below).

Enter the Tom mark. The unacceptable disk mark is indicated

First, open on the command line the disk that you want to format, for example, the G: (see disc. screenshot below).

Next, write the volume of Vol and click Enter. So you will find out the disk label and the serial number of Tom. (In my case, the disc “Windows 8”, without quotes).

Next, enter the formatting command again, and in the field the disk margin. the mark that we learned in the previous step (in my case. Windows 8). Further, you will be warned that all data when formatting will be destroyed (agree by introducing Y and pressing Enter).

In the next step, you will be offered to introduce a Tom mark. now you can set any name (32 characters). You can just leave the field empty by clicking on Enter. Actually, everything. the disk will be formatted (screen below).

With special. Utlit

Now hundreds of different programs and utilities to work with hard drives. Operations such as formatting, breakdown, defragmentation, etc., can be done in more convenient programs than built into Windows. Link to the article with the best of them. brought above.

In my opinion, one of those that deserves attention. This is Aomei Partition Assistant.

It allows you to quickly, safely, and it is easy to carry out the most necessary operations with disk drives:

  • change their size of sections (without formatting as well);
  • move sections;
  • combine sections;
  • format drives;
  • Change marks and many other!

Aomei Partition Assistant. What can be done with the disk section

What else bribes, the program has many different step.by.step masters. they will help to solve the problem even to those users who have just met PC recently. Well, for example, you can convert the FAT 32 file system to NTFS without data loss, transfer Windows from a hard drive to a newfangled SSD, etc.

See also  How to take a picture on the laptop's WEB-camera

How to format a laptop

Wikihow works on the principle of wiki, which means that many of our articles are written by several authors. When creating this article on its editing and improvement, 13 people (a) worked, including anonymously.

The number of views of this article: 154 370.

format, hard, drive, laptop

If your laptop is attacked by the virus and something is wrong with it even after you got rid of the virus, it may be worth formatting it. Since the contents of the hard drive are completely removed during formatting, this is the most reliable and effective way to clean the computer. The procedure for formatting a laptop today is very simple. Manufacturers provide the owner with a copy of the operating system (OS) together with drivers and utilities or create a section of restoration on a hard drive. However, before starting formatting, be sure to rewrite all the data to the external hard drive, CD or DVD, otherwise you will lose them.

Create a backup of a hard drive. Formatting the laptop will lead to the loss of all information stored on it, therefore, if you want to save it, you should rewrite the contents of the hard drive to the external hard drive, CD or DVD.

Determine which method of restoring the system is provided by the manufacturer. If you were given installation CDs with a laptop, then you need to use them. If you have not received any discs in the kit with your laptop, then, most likely, it contains a recovery section, and in this case you should use the second method. [1] X Source of Information

  • If the disk does not start automatically, open the “my computer” with a double click, click on the disk icon with the right button and select the “Autobase” item.
  • If you format the hard drive of your laptop, in response to the requests of the installation disk, confirm the standard settings provided by default.

Wait for the completion of the installation process. When the installation of the operating system is completed, an absolutely clean desktop will be displayed on the monitor.

format, hard, drive, laptop

The formatting procedure is valid for any version of Windows.

If you are going to save the documents, be especially careful, because you often do not know which folders contain important ones, and often there are not so much time to switch between folders. If so, what you should do: open “My computer” or “computer” and double.click C:.

Users folder contains documents, Pictures, Videos, Desktop, etc. D. Make sure you have completely copied all important documents, otherwise they may get lost.

format, hard, drive, laptop

If there is more than one user session on your computer, he will probably tell you that you do not have permission to copy certain files. In this case, you will have to go to other sessions and make a backup copy of your files in each of them.

Also check the Program Files folder to see if there is something that you want to save; Then insert the installation CD with the operating system that you are going to install and turn off the computer.

Then turn on the PC and enter the download menu: the access key may vary depending on PC, but the most common are F1, F2, F8, F9, F10, F11 and F12. Just when it lights up, it usually appears which of the keys to press; It lasts a couple of seconds, so pay attention to the start of Windows.

Select a CD for CDs or a USB slot from which the system is designed for Windows. Windows will upload installation files and lead you through a series of steps and processes to configure your PC.

Since you are going to format a hard drive, you will have two options on the screen: click user (expanded).

The screen will open with a list of installed hard drives or sections if your hard drive is divided into sections.

If you have more than one hard drive, I recommend that you choose the discs one after another and wipe each disk to get a fully clean system of the system without any old files.

There will be only one hard drive in the list, because you will delete all sections, so select the only element that you have left and name it for New. The field with the inscription will appear. leave it as it is and click apply.

You will see a warning message: click, and you will see that you have two sections again; Select the largest section and click on. At this stage, a process will start that your computer will reboot several times.

See also  What to do if the laptop started noise. How easy and quickly clean the laptop from dust with a vacuum cleaner?

If the recovery of the computer launches the formatting process from the very beginning, you will have to wait until the name of the installed operating system appears on the screen.

Then close the window. The computer will reboot again; Here you need to quickly extract the installation CD and the process will be completed. When the process described above ends, the configuration windows will appear in which you will need to choose a country, region and layout of the keyboard.

Now that formatting the laptop is completed, you will need to install drivers, programs and all previously saved documents.

To find out which Windows drivers did not recognize, open the Start menu, enter the “Device Manager” dispatcher in the search line and press the input key: on the components that you have to install manually, a yellow warning triangle will appear.

Avoid the use of programs such as Drivereasy or Drivergenius, since all that they will do is add advertising to your laptop, not to mention bombarding you with constant erroneous notifications of computer problems. It is always better to perform manual installation.

How to Format computer and laptop | Window 7. 8, 10 Format ? Computer format kaise kare in hindi

Conductor

Formatting a disk in Windows 10 can be done through a system control utility and file organization. “conductor”. Instruction, as follows:

  • Next, select the file system into which this area of ​​the drive is transformed. Give her a name and cancel “fast” if you do not want to clear only information headings. With such formatting, the information will remain on the hard drive (it can be restored), and when recording new data, the data will be rewritten.
  • Click “Start”. With quick cleaning of information, the process will take no more than a minute. The standard removal of all data is delayed and depends on the tank of the hard drive.

Through the command line

note! If you want to clean the HDD for FAT32, then instead of NTFS enter FAT32.

After using the team, a dialog box can jump out to confirm formatting.

Formatting by third.party programs

HDD can also format by third.party programs. They should be on a computer. If you need to format not ordinary, but a system hard drive, then these programs should be present on the loading medium.

The functionality of the first two of the three third.party programs under considerations significantly exceeds the possibilities of systemic means. However, we are only interested in. how to format the disk.

Acronis Disk Director

In the working window, this paid program, after highlighting the processed section, it is possible to perform many operations available in the “Action and Tools” section.

Note that Acronis Disk Director includes a special software tool. “Create a bootable carrier”, whose function is obvious from the name.

Minitool Partition Wizard

This program has more modest functionality than Acronis Disk Director, but it is free.

Minitool Partition Wizard Working Window has the following view.

After highlighting one of the sections, the list of operations becomes contextual. In it, in particular, the operation “Formate section” that we need is the work. click this item.

After the answer to the traditional questions of the dialog box: about the file system, the size of the cluster and the disk label (see. above). click “apply”, and then “yes”.

HDD Low LEVEL FORMAT TOOL

The name of this free program can be misleading. As noted at the beginning of the article, real low-level formatting of modern hard drives is made only at the manufacturer. The HDD Low Lowel Format program is actually not intended for low.level reformatting, but for complete (as well as quick) high.level formatting.

After this operation, the disk at the logical level is led to the same state as it had after low-level processing at the manufacturer. Therefore, the name of the program should be perceived conditionally.

The work window of the program is extremely simple. The regime of quick or full formatting determines the presence or absence of a checkmark next to the “Fast Cleaning” item. To start the process, click the item “Format the device”. In full mode, a traditional warning about the loss of data of the formatted section will appear.

BYRGPUB.COM 2022