via video driver settings

To begin with, I want to say that your video drivers must be installed and updated (as well as a control center for them. By the way, Windows often updates drivers for most hardware when installing the system, but they “go” without a control center!).

There is no Intel HD, nVidia or AMD Radeon video driver icon in the tray next to the clock and on the desktop. what to do.-

If the driver is installed on your video card, you just need to open the START menu, or look in the tray (next to the clock): there should be a corresponding icon (example below).

Or right-click anywhere on the desktop: there should be a link to the control panel in the context menu (example below).

Login to NVIDIA Control Panel // from the desktop

If you do not have such links, most likely, you do not have the drivers installed (or are by default, which were installed on the system along with Windows).

Windows 8, 10, 11

In order to open the display settings. press the WinR combination. and use the command desk.cpl (press Enter).

You can also right-click on the desktop. and select “Display Settings” from the context menu.

Next, the “Customize your screen” page will open: there are settings for orientation, screen brightness, and resolution. Set the required parameters.

Display options. Windows 11 options

using the built-in sensor (for transformers)

Often, the “problem” with the flipping of the picture on the screen occurs with convertible laptops (2 in 1 “laptop tablet”). The fact is that Windows does not always work correctly with the sensor, and by sharply turning the device, the picture can “move out” 180 degrees in the wrong direction.

The sensor automatically rotates the screen

Try to reboot the device and rotate it 90 degrees. it is likely that the sensor and Windows (at boot) will “set” the correct picture!

Next, I recommend going into the Windows settings and pre-configuring the display (for example, you can turn off auto-rotate.).

Intel

In the Intel settings, you need to open the “Display” section. In the “Rotation” subsection, you can select a value of 90-180-270 degrees (see screenshot below).

In addition, in this section you can set the refresh rate, set the resolution, scaling, and other settings.

Note: Please note that after changing the resolution or rotating the image, you will see a warning on your screen asking you to confirm the changes. If suddenly the picture on the monitor has completely deteriorated, and you do not see anything, then just wait 15 seconds, the changed parameters will be reset and return to their original values.

READ  How to Screenshot Samsung Phone Screen

How to flip the screen on a computer, laptop: 90, 180 degrees

Tell me what you can do: on my laptop, the screen turned 180 degrees and everything became upside down. The picture itself seems to be clear, without distortion, the laptop turns on and works otherwise as usual. Is it possible to rotate the screen without going to the service?

Quite a popular problem that occurs equally often, both on laptops and on PCs. Most likely, you just accidentally changed the video driver settings, or pressed a certain key combination. In this article I will give several ways how you can get everything back.

In some cases, flipping the screen is very useful.!

Do not think that software developers are intriguing you on purpose. For example, you are watching a photo or video taken upside-down. you clicked a couple of buttons and the screen turned. Comfortable? Comfortable!

Windows 7

Right-click anywhere on the desktop, select “Screen Resolution” in the pop-up context menu (as in the screenshot below).

Next, the screen settings will open: in the “Orientation” tab, change the value to “Landscape”. or “Book” (depending on requirements).

When you change the resolution or orientation, Windows will wait for you to confirm the changed settings. So, if something goes wrong, just wait 15 seconds. and don’t press any buttons.

Nvidia

In the NVIDIA Control Panel, click the Display tab (on the left side of the menu), then click the Rotate Display link. There you can choose an orientation:

  • landscape (default);
  • bookstore;
  • landscape (folded);
  • book (folded).

When choosing between these modes, set the parameter as it is convenient for viewing the image on the monitor.

In AMD Catalyst Center, everything is also quite obvious: open the menu on the left “Common Display Tasks / Rotate Desktop”. choose the mode from the list: landscape or portrait (there are also mirror options for them).

AMD Catalyst Center // select display orientation: portrait, landscape

Note: The settings menu can vary greatly depending on the version of the video driver.

How to flip the screen on a computer, laptop: 90, 180 degrees

Tell me what you can do: on my laptop, the screen turned over 180 degrees and everything became upside-down. The picture itself seems to be clear, without distortion, the laptop turns on and works otherwise as usual. Is it possible to rotate the screen without going to the service?

Quite a popular problem that occurs equally often on laptops and PCs. Most likely, you just accidentally changed the video driver settings, or pressed a certain key combination. In this article I will give several ways how you can get everything back.

In some cases, flipping the screen is very useful.!

Do not think that software developers are intriguing you on purpose. For example, you are watching a photo or video taken upside-down. you clicked a couple of buttons and the screen turned. Comfortable? Comfortable!

FLIP YOUR COMPUTER SCREEN!

using the built-in sensor (for transformers)

Often the “problem” with flipping the picture on the screen occurs with convertible laptops (2 in 1 “laptop tablet”). The fact is that Windows does not always work correctly with the sensor, and by sharply turning the device, the picture can “slide” 180 degrees in the wrong direction.

READ  Rear view camera is there a need for a camera

The sensor automatically rotates the screen

Try to reboot the device and rotate it 90 degrees. it is likely that the sensor and Windows (at boot) will “set” the correct picture!

Next, I recommend going into the Windows settings and pre-configuring the display (for example, you can turn off auto-rotate.).

using hotkeys

Nowadays, many laptops have special keyboard shortcuts for rotating the screen (they are called hot keys). They allow you to change the orientation of the image on the screen in a matter of seconds, for example, to make it portrait or landscape. As said above, this function is quite handy in some cases.

Keyboard shortcuts for rotating the picture on the monitor:

  • CtrlAlt (down arrow. By the way, you don’t need to press the pluses!). flip the screen 180 degrees (ie upside down);
  • CtrlAlt ←. rotate 90 degrees to the left;
  • CtrlAlt →. rotate 90 degrees to the right;
  • CtrlAlt. return images to their normal position.

These keys will not work for everyone, for example, they can be disabled by default in the driver settings (in the BIOS). Or the manufacturer did not lay them at all.

Intel

In the Intel settings, you need to open the “Display” section. In the “Rotation” subsection, you can select a value of 90-180-270 degrees (see screenshot below).

In addition, in this section you can set the refresh rate, set the resolution, scaling, and other settings.

Note: Please note that after changing the resolution or rotating the image, you will see a warning on your screen asking you to confirm the changes. If suddenly the picture on the monitor has completely deteriorated, and you do not see anything, then just wait 15 seconds, the changed parameters will be reset and return to their original values.

Nvidia

In the NVIDIA Control Panel, click the Display tab (on the left side of the menu), then click the Rotate Display link. There you can choose an orientation:

  • landscape (default);
  • bookstore;
  • landscape (folded);
  • book (folded).

When choosing between these modes, set the parameter as it is convenient for viewing the image on the monitor.

In AMD Catalyst Center, everything is also quite obvious: open the menu on the left “Common Display Tasks / Rotate Desktop”. choose the mode from the list: landscape or portrait (there are also mirror options for them).

AMD Catalyst Center // select display orientation: portrait, landscape

Note: The settings menu can vary greatly depending on the version of the video driver.

Ways to flip the screen

Windows 7

Right-click anywhere on the desktop, select “Screen Resolution” in the pop-up context menu (as in the screenshot below).

Next, the screen settings will open: in the “Orientation” tab, change the value to “Landscape”. or “Book” (depending on requirements).

When you change the resolution or orientation, Windows will wait for you to confirm the changed settings. So, if something goes wrong, just wait 15 seconds. and don’t press any buttons.

using the built-in sensor (for transformers)

Often, the “problem” with the flipping of the picture on the screen occurs with convertible laptops (2 in 1 “laptop tablet”). The fact is that Windows does not always work correctly with the sensor, and by sharply turning the device, the picture can “slide” 180 degrees in the wrong direction.

flip, screen

The sensor automatically rotates the screen

Try to reboot the device and rotate it 90 degrees. it is likely that the sensor and Windows (at boot) will “set” the correct picture!

READ  How to remove the camera from the iPhone screen

Next, I recommend going into the Windows settings and pre-configuring the display (for example, you can turn off auto-rotate.).

Ways to flip the screen

Windows 8, 10, 11

In order to open the display settings. press the WinR combination. and use the command desk.cpl (press Enter).

You can also right-click on the desktop. and select “Display Settings” from the context menu.

Next, the “Customize your screen” page will open: there are settings for orientation, screen brightness, and resolution. Set the required parameters.

Laptop and Desktop Screen Rotation Windows (Rotate Monitor 90 Degrees)

Display options. Windows 11 options

using hotkeys

Nowadays, many laptops have special keyboard shortcuts for rotating the screen (they are called hot keys). They allow you to change the orientation of the image on the screen in a matter of seconds, for example, to make it portrait or landscape. As said above, this function is quite handy in some cases.

Keyboard shortcuts for rotating the picture on the monitor:

  • CtrlAlt (down arrow. By the way, you don’t need to press the pluses!). flip the screen 180 degrees (ie upside down);
  • CtrlAlt ←. rotate 90 degrees to the left;
  • CtrlAlt →. rotate 90 degrees to the right;
  • CtrlAlt. return images to their normal position.

These keys will not work for everyone, for example, they can be disabled by default in the driver settings (in the BIOS). Or the manufacturer did not lay them at all.

Nvidia

In the NVIDIA Control Panel, click the Display tab (on the left side of the menu), then click the Rotate Display link. There you can choose an orientation:

  • landscape (default);
  • bookstore;
  • landscape (folded);
  • book (folded).

When choosing between these modes, set the parameter as it is convenient for viewing the image on the monitor.

In AMD Catalyst Center, everything is also quite obvious: open the menu on the left “Common Display Tasks / Rotate Desktop”. choose the mode from the list: landscape or portrait (there are also mirror options for them).

AMD Catalyst Center // select display orientation: portrait, landscape

Note: The settings menu can vary greatly depending on the version of the video driver.

Windows 7

Right-click anywhere on the desktop, select “Screen Resolution” in the pop-up context menu (as in the screenshot below).

Next, the screen settings will open: in the “Orientation” tab, change the value to “Landscape”. or “Book” (depending on requirements).

When you change the resolution or orientation, Windows will wait for you to confirm the changed settings. So, if something goes wrong, just wait 15 seconds. and don’t press any buttons.

BYRGPUB.COM 2021