What to do if the cord dangles in the charging connector?

Tips that will help to avoid tenting cable in charging connector.

When the charging cable hangs out or staggers in the nest, the charging process of the phone can be very problematic and nervous. If the user has to look for a suitable position for the wire for a long time, or it completely falls out of the nest and does not charge the smartphone, you must take action.

We will tell you what to do if the charging cord is walking in the device connector. In most cases, it is possible to solve the problem of tenting charging with your own hands, at home and in short time.

Is it possible to charge the phone from the phone?

One of the Interesting Charging Technologies. USB OTG (On-the-Go). It is implemented on the “Android” platform and allows you to quickly replenish the charge of one phone from another. You will need a device that has a OTG port and a capacious battery (we will use it as a PowerBank). Also need a special cable.

By connecting one phone into the OTG connector, and the other. in the usual charging socket, waiting until charging occurs. Of course, it will not be fully charged to fully charge the battery, but get the necessary minimum for 3-4 calls of increased importance will be quite possible.

Is it possible to fix the socket of the charging module?

How to fix the input for charging on the phone at home? Here you need to figure it out well, then everything will turn out. Inactive use of a mobile device very often ending with some breakdown that needs to be eliminated. Sometimes breakdown lies in the power cable connector. In this case, you need to learn how to repair it, and for this it is worth familiar with the main causes of the defect.

phone, charging, socket, tips

The main reasons for the breakdown of the device’s nest:

  • On the device, you can shed some fluid or just to drop it to remove this module.
  • Permanent mechanical impacts deform the nest, which can make the charging of the gadget is simply an impossible procedure. the plug will not enter the connector or it will hang in it, in this case it will be necessary to replace the nest.
  • Contact sites can also be pounded, which completely blocks access to the receipt of electricity.

Let’s talk immediately about the most terrible. about moisture.

The contact of the mobile phone connector with moisture is the most dangerous damage. Corrosion will launch the chain reaction and all adjacent components are oxidized. This kind of defects are able to harm and the dynamics, which is most often located at the bottom of the device. Also, the speaker itself gives access to moisture to enter the loop or connector. Therefore, not even heavy rain can bring your phone in order.

The most important thing is to estimate the complexity of damage, because not all cases allow you to repair the house. The best option is to use the services of a qualified specialist from a service center. So you won’t risk traveled your device.

Is it possible to repair the device at home?

Very rarely restoration work can be carried out independently. It is best to find an alternative way to charge for a while, until you definitely decide whether to repair it yourself. While the required amount of repair is postponed in the workshop, read the instructions for charging the phone with a broken nest:

Insert the charger into your smartphone and stick to the network.

Carefully move the cord and device in different directions. You may be able to close the contact and charge the device. If the mobile phone still detected the presence of a charger, then it is necessary to fix the positions found

In the course of the books and other items can install the phone so that the power continued. Before holding all these actions, you should make sure that the problem is in the nest, and not in the battery. Long-term use of the phone leads to what he stops keeping charge. For this case, you will have to get a new battery, and not to deal with the “phantom” breakdown. If it’s still in the nest, then repairing here not to avoid. If the socket leaves from the tablet or the USB-input breaks, try changing the nest itself or replace the cable.

If everything is in order with the connector now, but the problem of lack of energy in the battery still did not disappear, read about what to do if the phone does not charge from charging.

How to fix the phone charging socket

How to fix the phone charging socket? And how to fix the nest for charging the phone at home? Do not know? Let’s figure it out and at the same way.Ready?Then let’s start.With nesting use sometimes breaks the power supply slot. In this case, you should know how to fix the connector for charging the phone or charge in other way.

The main reasons for charging nest

You can force the breakdown of the connector if you have the habit of frequently drop the device or shed various drinks and other liquids to it. With constant blows, the nest can be deformed that it will make the charge of the tablet it is impossible, since the plug simply does not enter the connector, and may be overlapped by some body part that has shifted after a strong impact. Pin connectors can be brown and when connected, then your gadget will not receive energy. Where is the danger of damage from contact with the humid dock connector environment. This can suffer various adjacent components to which the polyphonic speaker belongs, which is always located at the bottom of the device. In most cases, it is the speaker, or rather its grid, is a conductor of liquid and moisture for penetration into the body of the device to a loop and connector.

Regardless of whether corrosion damaged the nest of your tablet or some physical damage. you will not get repaired yourself the connector. So you still have to contact the service center to professional professionals. In this case, be prepared for what you have to part with a certain amount of money for repairs.Or right now find out how to fix the electric kettle or tablet.

How to fix the socket for charging the phone at home

It is necessary to immediately designate that your device will not be able to fix this way. The broken nest of the power supply and will remain and repair will not avoid. This semi-meter is needed in situations when there is no need for a repair, and you need to use the mobile. Instructions, how to charge the phone if the nest broke:

  • Connect the charger to the device, stick to the network.
  • Try moving the cord, shifting up, down the position of the plug.
  • If the battery fails to charge due to the fact that the contact has moved, such actions can close it.
  • In case the cellular detected the charger, try to fix this position. Try to put books or other items under the wire so that the mobile phone can go so night and the battery charged. Before carrying out such manipulation, make sure that the problem is really in the connector, not the battery. With a long use, they have a property stop keeping charge. In this case, you should buy a new battery, and not fight with supposedly damaged socket. If the case is really in the connector, then avoid repair is unlikely to succeed. Consider that such manipulations with the wire can even more overwrite the connection location or break finally

Before carrying out such manipulation, make sure that the problem is really in the connector, not the battery. With a long use, they have a property stop keeping charge. In this case, you should buy a new battery, and not fight with an allegedly damaged nest if it really is in the connector, then avoid repair is hardly possible. Consider that such manipulations with the wire can even more overwrite the connection location or break finally

Replacing charging connector by a universal device

In a critical situation, when you do not know how to charge the phone, if the nest broke, you can use universal charging. Sometimes they call the device “frog”, it is relatively expensive, so it is not a fact that it is better than to give the device to repair. This device has a special groove in which you need to insert extracted from the mobile battery. However, this method has several obvious drawbacks:

  • During recharge, the smartphone is turned off, it is impossible to use it until the battery is charged;
  • The cost of the “frog” is high and sometimes does not justify the cost;
  • Among user reviews are situations,
  • When the charger broke the battery

If a socket has completely broke the phone charging directly

If you do not know how to change the charging socket on the phone, you can try to fill the stock of the battery, eliminating the need to use the power socket. The method is relatively complex and requires some skills from the scope of work with electricity. The essence is as follows:

  • It is necessary to remove the battery from the phone.
  • From the wiring of the charger, cut the insulation, turn the wires (disconnect from the outlet).
  • Clean the veins, determine where plus and minus.
  • Find the appropriate terminals on the battery from the mobile phone.
  • It is important to observe the polarity of wires and devices. Lock the veins and stick the plug into the outlet.

It is strongly recommended to use this method if you are not 100% sure in your skills. Do not carry out manipulations when you are alone at home, there must be a person who could help you with a possible shock. It should be borne in mind that this option is not normal for the battery and can lead to a breakdown or early depletion.

How to fix the phone charging socket personal recommendation

The only proven way to get rid of the problem. to give the case in the hands of professional workers. Perhaps after you tell me how much it costs to fix the socket for charging the phone, you will not want to use some “coaching paths”. In modern devices, this connector still performs the function of connecting to a computer, data transfer, so its breakdown is strongly cutting the device functionality. This is a microcircuit that at home will not be repaired independently. Phone repair is often poured into a round sum and should be ready.

It is best to contact the Certified Center. The ideal option will be the branded service point of the same manufacturer as your mobile. They know all the subtleties of their products and will be able to provide qualified assistance to eliminate breakage. Inexperienced or non-accurate workers are able to exacerbate the situation and bring the device to even greater damage.

Charging the device directly

How to fix the phone charger? You can try to fill the energy reserves by turning off the power port itself from the phone.

Important! This method is very complex and requires the user of basic knowledge and skills in working with machinery and electricity.

  • Remove the rechargeable battery from the smartphone.
  • Turn off the charger from the outlet, armed with a sharp object and remove isolation from the wire of centimeters to five.
  • Clean the wires and determine where the plus is, and where is minus.
  • Determine the polarity on the battery and connect the wires with it.
  • Fix the improvised terminals and serve power from the network.

Important! It is not recommended to resort to such a way as you can suffer even during charging. Do not work with wires without isolation, if you have never done this and do not know how electric current behaves.

Expendable materials

In addition to tools, you will need consumables. For soldering we will use a softless (neutral) flux, soldering paste. They are easy to buy in the appropriate store or order via the Internet on the same Ali.

Neutral flux (left) and soldering paste

To dismantle the nesting part with the help of a soldering iron, you will need a thin lead-tin solder with a smaller melting point. To remove solder residues from the tracks, copper shielding. If we work with a hairdryer, you will have to additionally buy thermal insulating (capitone or foil) tape to protect nearby parts from overheating and spontaneous dropping.

Important! Very often instead of ordinary solder, many use low-melting rose or wood alloys. I would not really recommend this to do even when dismantling the nest, because these alloys are too fragile, and completely clean them from the tracks after the removal will not work. Soldering even with a minimum admixture of these alloys cracks in the first week of operation of the gadget.

Welcoating will produce benzine “Kalosha”, isopropyl or ethyl alcohol, pre-taking responsible, fearing fluids nodes (microphone, camera, etc.) Ordinary scotch. Just in case, we get a copper single-core wire with a diameter of 0.2-0.3 mm. It will help us in case the malfunction lies in the cliff of the tracks. You can get such a wire from the usual stranded mounting, simply removing insulation from it. Of course, in this case you will need a scalpel or a sharp knife.

The vein from such a wire is useful to solve the problem of torn paths and contact sites

Healthy! The enameled winding wire is not worth using, because to lose it, you need to pre-mechanically read the enamel. And make it more or less qualitatively very difficult, especially if you are not special.

phone, charging, socket, tips

Alternative way to charge

If the design of your phone allows you to remove the battery, you can use universal charging. Such devices are called “Frog”. It is, of course, it is not very cheap, but sometimes you need to urgently charge the phone. This gadget has special grooves in which you need to insert and fix the battery.

But this method has a number of obvious drawbacks:

  • During charging, your smartphone will not work and it will be impossible to use it until the battery is charged.
  • The purchase price of the “Frog” is pretty high and not always justifies your purchase.
  • If the manufacturer’s reputation is very dubious, then you just hurt your device.

Replacing the charging connector universal “frog

In a critical situation, when you do not know how to charge the phone, if the nest broke, you can use universal charging. Sometimes they call the device “frog”, it is relatively expensive, so it is not a fact that it is better than to give the device to repair. This device has a special groove in which you need to insert extracted from the mobile battery. However, this method has several obvious drawbacks:

  • During recharge, the smartphone is turned off, it is impossible to use it until the battery is charged;
  • The cost of the “frog” is high and sometimes does not justify the cost;
  • Among user reviews, there are situations where the charger broke the battery.

How to replace charging socket on the phone

The only proven way to get rid of the problem. to give the case in the hands of professional workers. Perhaps after you tell me how much it costs to fix the socket for charging the phone, you will not want to use some “coaching paths”. In modern devices, this connector still performs the function of connecting to a computer, data transfer, so its breakdown is strongly cutting the device functionality. This is a microcircuit that at home will not be repaired independently. Phone repair is often poured into a round sum and should be ready.

It is best to contact the Certified Center. The ideal option will be the branded service point of the same manufacturer as your mobile. They know all the subtleties of their products and will be able to provide qualified assistance to eliminate breakage. Inexperienced or non-accurate workers are able to exacerbate the situation and bring the device to even greater damage.

Learn how to charge the phone without charging.

BYRGPUB.COM 2022