Table of Contents

How to find the MAC address of a remote computer?

You can easily get the MAC address of a remote computer connected to the same network as you. ARP (Address Resolution Protocol) is a tool that resolves the IP addresses and hardware addresses of devices that communicate with your computer.

To find the MAC address of a remote computer, follow these steps:

  • Go to Run. cmd to open command prompt.
  • Run the following command: ping 192.168.1.1 (Replace the IP address with the IP address of the remote computer)
  • Run the following command: ARP.A This will give you a list of all devices communicating with your computer. This list should include the IP address of the remote computer and its mac address (since we already linked to the IP address in step 2.

This is how you can find the MAC address by IP. You cannot ping the MAC address, but you can use the ARP command to check if a particular system is active on the network.

How to find the MAC address of a specific network adapter?

If you want to find the MAC address of a specific network adapter and you are not comfortable using the command line parameter, you can get it from the network status window. Follow the instructions below:

  • Go to Run. control / name Microsoft.NetworkAndSharingCenter The Network and Sharing Center will open. You can also open the Network and Sharing Center. by going to the Control Panel.
  • Click on the active network adapter for which you want to know the MAC address.
  • Click the Details button, which will open a new window. You can find the MAC address with all other network details.

How can I get a list of all MAC addresses on my network?

There is a utility called Wireless Network Watcher. It provides a wealth of information about the devices connected to the network. Although this is for wireless networks, it displays all devices on the network, regardless of whether they are wired or wireless. Wireless Network Watcher provides extensive information about each network device, including IP address, device name, MAC address, and company network adapter.

How to find MAC address in Windows 10?

find, address, computer

There are several reasons why you might need to find the MAC address of your network card. For example, if you want to connect to a hardware-protected network where only certain devices can connect to the network, you need to know your MAC address.

How to find Mac address using command line

To quickly find the MAC address of all network devices on your computer, you can use the getmac command. Here’s how to do it:

  • Go to Run. cmd to open command prompt.
  • Run the following command: getmac

This will give you a list of all the network devices on your computer and their corresponding MAC addresses. This command works well on Windows 10. The only problem is that it displays the transport name instead of the human-readable device name.

IPCONFIG is another command that can show you detailed information about each network device, including their MAC addresses. Here’s how to do it:

  • Go to Run. cmd to open command prompt.
  • Run the following command: ipconfig / all

What is MAC address?

Each network device has a unique identifier to uniquely identify itself on the network. MAC (Media Access Control) is a 12-digit hexadecimal number used to identify a network component.

The Mac address is a universally unique number. Two network devices cannot have the same MAC address.

The MAC address is also called the hardware address. MAC addresses can be easily changed or spoofed with some temporary hacks.

Windows 10 gives us several options to quickly find Mac addresses. We will discuss options here.

Final thoughts

MAC addresses are usually useful for network administrators. But everyone should know more about networking because this is how malware attacks systems. The better you know how things work, the better you can avoid and prevent malware infection of your system.

I hope I have answered most of the questions people have about the mac address If I am missing or confused, please let me know in the Комментарии и мнения владельцев below and I will do my best to update the article with more information.

How to find the MAC address

How to find out the MAC address of a computer (network card) First of all, what is a MAC (Mac) address is a unique physical identifier of a network device that is written into it at the production stage. Any network card, Wi-Fi adapter and router and just a router. they all have a MAC address, usually 48-bit. The instructions will help you find out the MAC address in Windows 10, 8, Windows 7 and XP in several ways. Do you need a MAC address? In the general case, for the network to work correctly, but for an ordinary user it may be needed, for example, in order to configure a router.

How to find the MAC address in Windows through the command line 1. Press WinR keys on your keyboard (Windows XP, 7, 8 and 8.1) and type cmd, Command Prompt will open. 2. At the command prompt, enter ipconfig / all and press Enter. 3. As a result, a list of all network devices on your computer will be displayed (not only real, but also virtual, those may also be present). In the “Physical address” field, you will see the required address (for each device its own. that is, for the Wi-Fi adapter it is one, for the network card of the computer. another). The above method is described in any article on this topic and even on Wikipedia. And here is another command that works in all modern versions of the Windows operating system, starting with XP, for some reason is not described almost anywhere, besides, ipconfig /all does not work for some. Faster and in a more convenient presentation you can get information about MAC address using the command:

It will also need to be entered into the command line, and the result will look like this:

find, address, computer

Viewing the MAC address in the Windows interface

Perhaps this method of finding out the MAC address of a laptop or computer (or rather, its network card or Wi-Fi adapter) will be even easier than the previous one for novice users. It works for Windows 10, 8, 7 and Windows XP.

You will need to follow three simple steps:

  • Press the WinR keys on your keyboard and type msinfo32. hit enter.
  • In the “System Information” window that opens, go to “Network”. “Adapter”.
  • On the right side of the window, you will see information about all network adapters of your computer, including their MAC

find, address, computer

Another easy way to find out the MAC address of a computer or, more precisely, its network card or Wi-Fi adapter in Windows is to go to the list of connections, open the properties of the desired one and see. Here’s how to do it (one of the options, since you can get to the list of connections in more familiar, but less fast ways).

How to see the MAC address on Windows 7 and Windows 10

The Whoer.net blog team is here again. Today we will explain in simple language the concept of a MAC address and explain how this address can be viewed.

In our previous articles, we mainly talked about the IP address, which, with a certain degree of simplification, is the number of a device on the Internet. Without a connection to the global network, the role of such an identifier is played by the Mac (MAC) address. Unlike IP, which can change every time you connect to the Internet, the Mac address is unique for each device. It is not by chance that it is called the hardware address.

Also, the Mac-address differs from the IP in that when surfing the Internet it is not used directly, but is only present in the data logs. The hardware address is primarily needed for the initial configuration of network connections and to increase computer security.

Computers, laptops and other devices run many operating systems, but today we will only consider the Windows OS family. There are a lot of options on how to find out the Mac address of a Windows computer, but we will start with the simplest.

How to find the Mac address of a Windows 7 computer

Open the “Taskbar” by clicking the “Start” button, then click on the “Control Panel” menu, go to the “Network Control Center” and in the links menu, click on the item with the name “Change adapter settings”. There may be several physical or virtual network cards on the device, so find the card that is currently connected to.

In the screenshot, the active connection is via the Realtek card.

On the active connection, right-click, select “Status”, then in a new window, click the “Details” menu.

Find the line “Physical address”. This is how the MAC address is called in Windows 7.

How to find the Mac address of a Windows 10 computer

The Windows 10 operating system has a completely new interface, which for some users may not be too familiar or obvious. The names of some menu items here have changed a lot compared to previous versions of the system, so we will tell you about this OS as well, showing our readers an easy way to find out the Mac address of Windows 10.

Left-click on the network connection icon, which is located in the lower right corner next to the clock, and click on “Network Settings”. In the window that appears, click on the “Configure adapter parameters” menu.

READ  How to open 4K video on a computer

find, address, computer

A folder with an active network connection will open, on the icon of which you should right-click, selecting the item with the name “Status”. In the item “Information” you will find the desired hardware address.

A few more ways to find out where the Mac computer address is

Regardless of what kind of Windows OS the user has. even an old XP, even a server version. it is quite possible to look at the Mac address of Windows without using any buttons on the system interface.

For example, you can view it in the Windows console. Hold down the WIN button on the keyboard and, without releasing it, press the letter R. In the window that appears, type cmd in English and confirm the entry by pressing Enter. In the command line interface, type the word GETMAC in English, and after a while the program will give you a list of Mac addresses of your computer.

In the same window, you can enter the ipconfig / all command to see the device’s IP address in addition to the MAC address.

This concludes the article. We hope that the above information will help our readers understand how to find out the Mac address of a PC. You can read how to change the MAC address here.

Another way through the command line

This option also requires a command line. This method must be performed if the ipconfig / all command did not work.

Run Command Prompt as administrator and enter the command getmac / v / fo list.

This command allows you to quickly get information about the unique identifier of the network card of a personal computer or laptop.

As a result of executing the command, the following console window will appear:

find, address, computer

The result of running the getmac / v / fo list command in the system command line

You can see the physical (Mac) address of each available connection, in particular, and the computer itself. the first physical address in the table.

On the packaging from the computer

If you still have the original packaging from your system unit or laptop, take it out.

As a rule, the manufacturer indicates the name and model of the network card, as well as its physical address.

In addition, all interfaces available for this network card must be indicated on the box.

find, address, computer

What is a MAC address and how to find it

What is a MAC address and what is it for? MAC address. Is a unique identifier for the network card of a personal computer. That is, to put it simply, this is the unique name of a device connected to the network.

View Mac address using command line

View Mac address in command line mode

What is a unique MAC identifier for??

This address is necessary for the organization and correct operation of the entire configured network. Ordinary users may come across a Mac address only at the stage of connecting a router (router).

Many providers use the so-called MAC address binding on the network for security purposes.

It allows you to access the Internet only to those computers and devices whose Mac address is known by the provider.

This helps to avoid third-party traffic consumption and ensure the security of data exchange over the network.

find, address, computer

Let’s take a closer look at how Windows users can find out the unique address of the device.

How to find the MAC address of a computer

How to find out the MAC address of your computer: 6 easy ways

How to find out the MAC address of your computer: 6 easy ways

As a rule, to create a network between two computers or set up a router, you need to find information on how to find the Mac address of a computer.

MAC Address is a personal (unique) address that is assigned to each computer, more precisely, a network device, which is recorded in the PC at the stage of its manufacture.

Absolutely all network devices have such an identifier (routers, network cards, Wi-Fi adapters, routers and other components).

In most cases, the Mac address consists of 48 bits.

The abbreviation MAC stands for Media Access Control.

find, address, computer

The abbreviation MAC stands for Media Access Control.

How to see the MAC address in the properties of a network connection

If you do not like the interface of the Options menu, then you can use the old interface that was used in previous versions of Windows. To do this, open the Run menu (Win-R key combination) and enter the command “ncpa.cpl”.

This will open the “Network Connections” window with a list of all network connections available on your computer. To view information about the network connection, open it with a double click or right-click and go to “Status”.

Then click on the “Details” button to open detailed information about the connection.

This will open a window with detailed information about the selected network connection. Here in the line “Physical address” the MAC address for this connection will be indicated. To copy data, use the keyboard shortcut Ctrl-C.

How to see the MAC address in the Windows 10 command line

Also, the MAC address of the computer can be found using the Windows 10 command line. To do this, Windows 10 has several different commands at once.

How to see the MAC address in the “Options” menu

If you are using the Windows 10 operating system, then you can find out the MAC address of your computer using the new “Options” menu. To open this menu, open the Start menu and click on the gear icon or use the Win-i key combination.

In the “Settings” menu, go to the “Network and Internet” section.

In the window that opens, you will see information about your local network and Internet connection, as well as a list of your network connections. Each of the network connections has its own unique MAC address. Select the network connection, the MAC address of which you want to find out, and click on the “Properties” button.

As a result, you will be taken to a page with information about the selected network connection.

Here you need to scroll down the window to the very end, where in the line “Physical address” the MAC address of the computer for this network connection will be indicated. This address can be selected with the mouse and copied to the clipboard.

GETMAC Command

The simplest option is the “getmac” command. In order to find out the MAC address of the computer in this way, just start the Windows 10 command line and enter the following command:

After executing this command, the console will display a list of all network connections that are on the computer, as well as their MAC addresses (column “Physical address”).

In order to copy the MAC address from the command line, simply select it with the mouse and right-click or use the familiar Ctrl-C.

How to find the MAC address of a computer on Windows 10

A MAC or Physical Address is a unique six or eight byte address that is assigned to all active network devices at the factory. For example, network cards, Wi-Fi and Bluetooth adapters have unique MAC addresses. Thus, a desktop computer can have one or more MAC addresses at once, depending on the number of installed network adapters.

In this article, we will show you how to view the MAC address on a computer running Windows 10.

IPCONFIG Command

Also, in order to view the MAC address on a Windows 10 computer, you can use the “ipconfig / all” command. To use this method, simply start a command prompt and run the following command:

After executing the “ipconfig / all” command, the console will display detailed information about all network connections that exist on the computer.

In order to find out the MAC address of the computer, you need to scroll through the displayed information and find the desired network connection. Here in the line “Physical address” the MAC address will be indicated.

GETMAC Command

If the above method seems too complicated for you, then you can use the command line. Open a command prompt and enter the GETMAC command. After that, the system will display a list of network cards with their MAC addresses.

This method allows you to very quickly find out the MAC address of your computer.

How to find the MAC address of a computer on Windows 7

How to find the MAC address of a computer? Many Internet users face this question. The need to find out the MAC address of a computer may arise when configuring a router or other actions related to a local network. In this article, we will look at several ways that you can quickly find out the MAC address of your computer on Windows 7.

MAC address of the computer in the properties of the network connection

Before proceeding with the main part of the article, it should be noted that the MAC address is assigned not to the computer, but to the network card. In other words, a computer can have multiple MAC addresses if it has multiple network cards. For example, a computer might have an Ethernet network card and a Wi-Fi module. In this case, the network card and the Wi-Fi module will have different MAC addresses.

The easiest way to find out the MAC of a computer is to look at the network connection information. To do this, click on the network connection icon on the taskbar and click on the link “Network and Sharing Center”.

You can also open the “Network and Sharing Center” and through the Control Panel, for this you need to click on the link “View network status and tasks”.

After you open the “Network and Sharing Center” window, you need to click on the link “Local Area Connection”.

And in the window that opens, click on the “Details” button.

After that, a window with information about this network connection will open in front of you.

Here you can find out the MAC of the computer, as well as the IP address and other data about the configuration of the local network.

IPCONFIG / ALL Command

Besides GETMAC, you can use the IPCONFIG / ALL command. Open a command prompt and enter the command IPCONFIG / ALL. After entering this command, you will see detailed information about all connections on your computer.

In order to find out the MAC address, find the connection you need and look at the physical address. The physical address is your MAC address.

When using IPCONFIG / ALL, you need to be careful, because this command displays information about all connections at once, each of which has its own MAC address. In order not to get confused, it is easiest to focus on the name of the network card, it is indicated in the “Description” field.

By the way, the IPCONFIG / ALL command is available in all popular operating systems. The only difference is the spelling of the command itself:

Linux ifconfig.a | grep HWaddr
FreeBSD ifconfig | grep ether
Mac OS X ifconfig
Solaris ifconfig –a
HP-UX / usr / sbin / lanscan
QNX4 netinfo –l
QNX6 ifconfig or nicinfo

The creator of the site comp-security.net, the author of more than 2000 articles on computer repair, working with programs, setting up operating systems.

Thank you so much for the article! I will be your frequent visitor, if necessary!

Finding the MAC address of your computer is easy!

MAC address (from English Media Access Control) is a unique identifier assigned to each piece of equipment in computer networks, which sometimes requires knowledge of the physical address of the adapter?

  • to set up a connection to the network of the Belarusian provider Cosmos TV;
  • to configure security with filtering by MAC addresses in the network. Those. make it so that only devices with specified MAC addresses can connect to our wireless device. this is sometimes convenient;
  • other necessary settings, configuration changes, for information purposes.

In order to find out the MAC of our network card, you can use one of the proposed algorithms below.

READ  Transfer from computer to iPhone

When there is a box from the device. You can see the Mac address of the device on the box in which the network card, modem, access point were sold. All available interfaces and parameters will be indicated there, including the physical address of the device.

We look at the parameters as advanced computer users do. Click WinR. Enter the command. cmd into the window. Press Enter. In the command line that appears, enter the command. ipconfig / all (note the presence of a space after ipconfig and its absence after the slash). We are looking for an adapter among other interfaces.

Method 3 The easiest and most memorable way: Go to Start. Control Panel. Network and Sharing Center. Change adapter settings. right-click on the adapter we need. Status. Information.Mac address will not be difficult to find. as in the picture below.

How do we make sure we know the address of the exact device we wanted? After all, a laptop can have several network devices. Everything is simple here! If the computer is connected to the modem via a network cable, look for MAC devices as in the pictures above. Realtek PCIe GBE Family Controller. If we work via a wireless network, then most likely we need to find out the MAC address of the wireless network card. In the picture, this is D-Link Wireless.

Sometimes it happens that you need to find out the physical address (MAC address) of the computer’s network cards to configure the Internet, connect or organize network security

And since the MAC of the computer on the network corresponds to the MAC of our network adapter (through which the PC goes to the network), we will learn how to quickly find out the physical address of our network adapter (especially since changing the MAC address of the network card is not at all difficult). You do not need to call to consult a computer service.

Laptop label

  • 2019
  • 2021
  • Downloads
  • From smartphone
  • Networks
  • News
  • Soft
  • Wiki
  • Windows
  • Windows 10
  • archive
  • Security
  • Iron
  • Solutions
  • Websites
  • Reference books

How to find the MAC address of a computer (network card)

First of all, what is a MAC (Mac) address is a unique physical identifier of a network device that is written into it at the production stage. Any network card, Wi-Fi adapter and router and just a router. they all have a MAC address, usually 48-bit. It can also be useful: How to find the MAC address of a Windows 10 computer or laptop, How to change the MAC address. The instruction will help you find out the MAC address in Windows 10, 8, Windows 7 and XP in several ways, also below you will find a video guide.

Do you need a MAC address? In the general case, for the network to work properly, but for an ordinary user, it may be needed, for example, in order to configure a router. Not so long ago, I tried to help one of my readers from Ukraine with setting up a router, and for some reason it did not work. Later it turned out that the provider uses MAC address binding (which I have never seen before). that is, Internet access is possible only from the device whose MAC address is known to the provider.

Viewing the MAC address in the Windows interface

Perhaps this method of finding out the MAC address of a laptop or computer (or rather, its network card or Wi-Fi adapter) will be even easier than the previous one for novice users. It works for Windows 10, 8, 7 and Windows XP.

You will need to follow three simple steps:

  • Press the WinR keys on your keyboard and type msinfo32, hit Enter.
  • In the “System Information” window that opens, go to “Network”. “Adapter”.
  • On the right side of the window, you will see information about all the network adapters on your computer, including their MAC address.
    find, address, computer

Another way

Another easy way to find out the MAC address of a computer or, more precisely, its network card or Wi-Fi adapter in Windows is to go to the list of connections, open the properties of the desired one and see. Here’s how to do it (one of the options, since you can get to the list of connections in more familiar, but less fast ways).

  • Press the WinR keys and enter the command ncpa.cpl. this will open a list of computer connections.
  • Right-click on the desired connection (the desired one is the one that uses the network adapter, the MAC address of which you need to find out) and click “Properties”.
  • At the top of the connection properties window, there is a “Connect via” field, which contains the name of the network adapter. If you move the mouse pointer to it and hold it for a while, a pop-up window will appear with the MAC address of this adapter.

I think that these two (or even three) ways to determine your MAC address will be enough for Windows users.

At the same time, I prepared a video that shows step by step how to view a Mac address in Windows. If you are interested in the same information for Linux and OS X, you can find it below.

How to find mac address & Ip Address

How to find the MAC address in Windows through the command line

About a week ago I wrote an article about 5 useful Windows network commands, one of them will help us find out the notorious MAC address of a computer’s network card. Here’s what to do:

  • Press the WinR keys on your keyboard (Windows XP, 7, 8, and 8.1) and enter the command cmd, command prompt will open.
  • At the command prompt, enter ipconfig /all and hit enter.
  • As a result, a list of all network devices on your computer will be displayed (not only real, but also virtual, those may also be present). In the “Physical address” field, you will see the required address (for each device its own. that is, for the Wi-Fi adapter it is one, for the network card of the computer. another).

The above method is described in any article on this topic and even on Wikipedia. And here is another command that works in all modern versions of the Windows operating system, starting with XP, for some reason is not described almost anywhere, besides, ipconfig / all does not work for some.

In a faster and more convenient way, you can get the MAC address information with the command:

It will also need to be entered into the command line, and the result will look like this:

find, address, computer

Find out the MAC address in Mac OS X and Linux

Not everyone uses Windows, and therefore, just in case, I tell you how to find the MAC address on computers and laptops with Mac OS X or Linux.

For Linux in the terminal, use the command:

On Mac OS X you can use the command ifconfig, or go to “System settings”. “Network”. Then, open advanced settings and choose either Ethernet or AirPort, depending on which MAC address you want. For Ethernet, the MAC address will be on the Hardware tab, for AirPort see AirPort ID, this is the address you want.

Tell me how you can open port 25565 in the DIR-300 d1 router and in the DIR-300NRU router. How many did not delve into the settings of the router, it is useless. When checking, writes the port is closed

Hello. There are instructions on how to open ports on a DIR-300 router on the network (I just can’t fit into a commentary, but it’s simple there). Plus, keep in mind that a firewall can block.

Thank you, Dmitry, I did not take into account the Firewall. Everything works now.

I can tell you that at least the Inerzet company in St. Petersburg has a MAC address binding and IPoE connection type, respectively, with a fixed IP address, mask, gateway and DNS addresses. Sometimes it does not work even because the wrong DNS is attached, and only one of the two.

Thank you for the information! Good luck in your business!

very sensible information. no water Thanks buddy for the educational program, Good luck!

In 2k19, almost all providers work at the Mac address, so when reinstalling Windows, you need to look for it and drive it into your personal account, ATP for information

Well, not at all, this is not the case in the Russian Federation. Calmly I change routers (accordingly, there is a different Mac everywhere) on different providers, everything works everywhere without changes.

Good afternoon Dmitry. The list of Wi-Fi connected devices contains one device with an incomprehensible Mac address. The Mac address does not belong to any device I use. I checked through the commands described in the article that there is no such Mac address, there is not a single laptop network card. Using the manufacturer’s search services on Mac does not give any result either. I reset the router to the factory ones, changed the passwords and names of the Wi-Fi network. And this address reappeared in the list of devices. Only a laptop, a tablet and 2 smarts are connected. and in the list of devices there are always 5 pcs. Can it additionally appear a Mac address with one of the devices., Or is it still someone connects even when I changed passwords. Here is the actual Mac address 00: 53: BE: 00: 9E: F9

Hello. I can’t guess, but it often happens that people forget about connected TV-boxes, TVs, consoles and similar things (including cable-connected ones). Also, in theory, it may turn out that the router shows the MAC address of the provider’s router (although in clients it should not be displayed in general). You can try to disconnect all cables (including the provider’s cable) from the router, go to the settings for Wi-Fi connection and update the list of clients, see if the specified Mac has disappeared. If there are any “extenders” of the Wi-Fi signal (repeaters), they also have their own Mac address

MAC address in System Information (msinfo32)

Windows 10 has a built-in System Information utility that allows you to view basic information about your computer, including the MAC address:

  • Press the WinR keys on your keyboard, type msinfo32 and press Enter.
  • In the window that opens, go to the “Components”. “Network”. “Adapter” section. Find the one you need in the list of adapters and see its MAC address.
    find, address, computer

How to find the MAC address of a Windows 10 computer or laptop

If for one purpose or another you need to look at the MAC address in Windows 10, you can easily do it in several ways at once: some are unique only for this OS, some were present in previous versions of Windows.

This tutorial details how to find the MAC address in Windows 10 and additional information that may be useful for a novice user. On a related topic, it can be useful: How to change the MAC address of a computer.

Viewing the MAC address in the connection properties

You can go to the properties of the Internet connection and quickly see the MAC address of the adapter there:

  • Press WinR keys on your keyboard, type ncpa.cpl and hit Enter.
  • In the list of connections, right-click on the connection and select “Properties” from the context menu.
  • Move the mouse pointer over the name of the network adapter in the upper part of the window. as a result, the MAC address of the device will be displayed in a pop-up window.

Also, if you open not the properties, but the “Status” of the active network (2nd step), and then click the “Details” button, you will see the following window:

It also displays the MAC address of the network card or Wi-Fi adapter in the “Physical address” line.

MAC Address in Windows 10 Command Prompt

Another way to see the MAC address for any network adapter in Windows 10 is using the command line:

  • Run Command Prompt. The fastest way to do this is by using the search in the taskbar.
  • Enter the command ipconfig / all and press Enter.
  • You will see a list of network adapters (including virtual ones, if any) with information about the MAC address for them in the “Physical address” section.
    find, address, computer
  • In a more convenient form, the list of MAC addresses can be seen using the getmac / v / fo list command
READ  What kind of computer do you need to process 4K video?

Typically, an address is required for an active connection. You can see the MAC address of the active Wi-Fi adapter in the “Options” interface using the following simple steps:

  • Open “Settings” (to do this, you can press the WinI keys on your keyboard or use the corresponding item in the Start menu).
  • Go to the “Network and Internet” section.
  • On the right, select the adapter (Wi-Fi or Ethernet) for which you want to determine the MAC address.
    find, address, computer
  • Click on “Hardware Properties” and on the next screen you will see information about your connection and adapter properties. The last item “Physical address (MAC)” is the MAC address of the corresponding network adapter.
    find, address, computer

Also, pay attention to the fact that in the connection properties in the settings of Windows 10 of the latest versions there is an item “Use random hardware addresses”. If this item is enabled, the MAC addresses will automatically change with each new connection.

Additional Information

In conclusion, two nuances that may be useful for a novice user:

  • If you need a MAC address to provide it to your provider, then keep in mind that when connecting through a router, the provider can “see” a different MAC address. the one that the Wi-Fi router itself has. It can be viewed in the settings of the router, it is also usually indicated on a sticker on the back (bottom) of the router.
  • If you need to enter your MAC address somewhere, keep in mind that in Windows 10, “-” characters can appear as separators between each two characters when viewing, and when entering you need to use a colon or enter a MAC address without separators at all.
  • In the settings of the router in the list of connected clients, you can see the list of devices that are connected via Wi-Fi and LAN. They also have MAC addresses.

How to find MAC address via command line

This is the easiest method. Press the Win R key combination and enter cmd in the menu that appears. After confirmation, the command line will start. We enter getmac. The physical address is displayed, which is the MAC address. For more details, you can use the ipconfig / all command.

find, address, computer

Thus, you can find out the model of the network adapter, the configuration of the basic parameters of the equipment, the ip-address of the router and other information. The latter, by the way, is useful if you are going to set up a connection or a Wi-Fi network.

How to find the MAC address of a computer, router or other device

Every device on the network has a MAC address: a unique combination of numbers and letters, 48 ​​characters long. There are many ways to find out. they are all in our article.

find, address, computer

Any device that can connect to the WAN has a special identifier called a MAC address. It is often needed to set up a network connection. The MAC address is one of the main characteristics of a network adapter, therefore information about it is contained in many tools built into the operating system.

If you are asked to register (or name) a MAC address to configure the equipment, you must first find it. Here’s how to do it.

How to find the MAC address in the system information

Almost all information about the computer and installed components can be found in a special utility built into the operating system. To launch it, you need to press the already familiar Win R key combination and enter the msinfo32 command. The program window will appear. We are interested in the section Components Network Adapter.

find, address, computer

At the very bottom, we will find the MAC address. Other useful data can also be found here. For example, BIOS version, operating system type and bit, Windows error messages, and more. In case you need any information about the PC, we recommend that you first look here. Most likely, you will find what you need in this program.

Method 1

open the “Start” menu and go to the “Control Panel”. There, in the “Network and Internet” section, click on the item “View network status and tasks”;

a window will open, in the right part of which you need to click on the item “Change adapter parameters”;

in the next window, double-click the left mouse button on the connection of interest. Another window will open, in which you need to click on the “Details” button;

in the window that appears, all information about the network connection will be displayed, including the MAC address of the computer’s network card. In this case, the MAC address will have the name “Physical address” (see image).

How to find the MAC address of your computer

MAC address of the computer. it is the unique permanent identifier of its network card. It represents 6 pairs of characters, separated by dashes or colons.

How to Find the MAC Address in Windows 7

The MAC address is often used by ISPs to bind their services to a specific computer only. It should be borne in mind that if a computer has several network cards installed, it will simultaneously have several MAC addresses. When setting up a network, you need to take into account the MAC address of the network adapter through which the computer is connected to this network.

If you need to find out the MAC address of your computer, you can do this in several ways.

Method 2

The MAC address of the computer can be found through the command line, proceeding as follows:

open a command prompt (see the start menu). Read more about how to open the command line here;

immediately after an invitation like “C: \ Users \.” enter the command GETMAC and press the Enter key. After a few moments, the command line window will display the MAC address of the computer, which, as in the previous method, will be called “Physical address” (see image).

Method 3

The Windows operating system has a utility that provides detailed information about the computer, including its MAC address.

To run this utility, you need to press the key combination on the keyboard WinR, in the window that opens, print or copy the word msinfo32 from this page there. then press the Enter key.

A system information window will appear, on the left side of which you need to open “Components” ⇒ “Network” ⇒ “Adapter”.

After that, information about the computer’s network adapter, including its MAC address, will be displayed on the right side of the window.

find, address, computer

Every computer, laptop, or any other device that connects to the network has a so-called MAC address. This is a unique identifier, “sewn” by the manufacturer into its network card.

However, Windows settings can be changed so that the computer’s network card uses a different identifier instead of the hardcoded MAC address.

Why is this needed? For example, many ISPs use the MAC address to identify their computers to provide their services to specific users. If you purchase a new computer, you will not be able to simply connect it to such a network. You will either need to contact your ISP, or change the MAC address of the computer to the one that the previous one had. For obvious reasons, the second option is more convenient.

There can be many other reasons for changing the MAC address.

The number of owners of two or more home computers (laptops) is constantly increasing. Each such person periodically needs to transfer certain files from one computer to another.

For these purposes, you can use removable media, Bluetooth, etc., but when it comes to transferring significant amounts of information, the most practical and fastest way would be to connect a computer to a computer directly through their network cards. In addition, such a connection can be used to connect a second computer to the Internet connection of the first, as well as to solve other problems.

In many instructions for configuring the network parameters of a computer, there are recommendations to open the “Network Connections” section and perform some actions in it. However, such instructions often do not indicate exactly how this section can be accessed.

At the same time, not all users, including those who are quite experienced, know what needs to be done for this. over, in new versions of Windows, there is no item with the corresponding name in the Control Panel.

If you are one of them, this quick guide will help you.

The concept of “IP-address of a computer” refers to the basic and is of great importance for understanding the principles of operation of any modern computer network, as well as the successful use of all the advantages of network technologies.

From this short note, you will learn what an IP address is, what is its practical meaning, learn how to determine the IP address of a computer.

AHCI is an advanced mode of operation of the SATA interface (connector), through which modern storage devices (hard drives, SSD) are connected to the computer’s motherboard. Using AHCI allows you to speed up your computer’s disk subsystem.

This article describes how to activate AHCI in Windows Vista and Windows 7.

Find MAC address on Windows 10

The computer’s internal storage devices (hard drives and SSDs) run faster with AHCI enabled. This has a positive effect on the overall performance of the entire computer.

How to enable AHCI on Windows 8 computers will be discussed in this article.

SHOW MORE

When you may need a MAC address?

Sometimes there are situations when we need to copy the Mac address of our network card on another computer or laptop, or, for example, enter the Mac address in the settings of our router. If we are interested in and are engaged in computer security, we should know what a MAC address is and what it is eaten with.

MAC address

So, MAC (Mac). address. the personal identification number of your computer, or rather the network card of a computer, laptop, tablet, smartphone. Basically, a MAC address physically identifies a particular personal computer. And this parameter is not depending on whether the PC is turned on and whether it is connected to the Internet.

How to find out your Mac address in Windows XP / Vista / 7/8 ?

First of all, it is worth explaining what a MAC address is.

How to determine the MAC address of a computer?

There are several ways to find out your MAC address in Windows Vista / XP / Vista / 7/8.

Method 1 1) Run the command line by typing “cmd.exe” on the keyboard in the Start menu search bar 2) Enter the command “ipconfig / all” 3) As a result, we will see the following (what is highlighted in red is our Mac address)

Method 2 1) Run the command line, type in the Start menu search bar “cmd.exe” 2) Enter the command “getmac” 3) This command displays a list of all Mac addresses of network devices (in our case, we see only one network device, but there may be more)

Method 3 1. Open the Windows Control Panel, click Network and Internet Network and Sharing Center, in the left column, click “Change adapter settings”

Right-click on the network connection for which we want to know the MAC address, and then click “Status”

In the window that appears, we will see the line “Physical address”, this is our MAC address.

In other articles we will talk about: How to change the MAC address. How and why to make it static.

BYRGPUB.COM 2021