Sanyo

  • IP address: 192.168.0.2
  • Login: admin
  • Password: admin
  • Reset password: Reset button

Corum

  • IP address: 192.168.1.200
  • Login: admin
  • Password: admin
  • Find out IP address: IP Search Tool

Hikvision

  • IP address: 192.168.1.64 / 192.0.0.64 / 192.168.254.1 / DHCP
  • Login: admin
  • Password: set upon activation / 12345
  • Verification code: indicated on the camera sticker / set in the web interface / ABCDEF
  • Find out IP address: SADP Tool
  • Reset password (CH in serial): contact us
  • Reset password (without CH in serial): SADP Tool / Reset button
  • Technical support phone: 8-800-550-66-55

Canon

  • IP address: 192.168.100.1 / DHCP
  • Login: root
  • Password: camera / camera model
  • Find out IP address: Canon Camera Management Tool
  • Reset password: Reset button

NOVIcam

  • IP address: 192.168.1.10 / 192.168.0.88 / DHCP
  • Login: admin
  • Password: empty / 12345 / set upon activation
  • Find out IP address: Novicam Search / SADP Tool
  • Reset Password: Reset / SADP Tool Button
  • IP address: 192.168.1.2 / 192.168.1.120
  • Login: Admin / admin
  • Password: Admin / admin
  • Find out IP address: Omny IP Tool
  • Reset password: Reset button

Bosch

  • IP address: 192.168.0.1 / DHCP
  • Login: service / user / live / admin
  • Password: service / empty / set upon activation
  • Find out the IP address: Bosch IP Helper / Bosch Configuration Manager
  • Reset password: Reset button / Reset contacts
  • Technical support: 8-800-200-29-61

TP-Link

  • IP address: 192.168.1.60 / DHCP
  • Login: admin
  • Password: any / admin
  • Find out IP address: IP Search Tool
  • Reset password: Reset button / contact us

BSP Security

  • IP address: 192.168.1.10 / 192.168.1.66 / 192.168.1.88 / 192.168.1.200
  • Login: admin
  • Password: admin / 123456/1111 / empty
  • Find out IP address: IP Search Tool

Login to MikroTik router with RouterOS. 192.168.88.1

We suggest that you familiarize yourself with the instructions for entering the settings of MikroTik routers. Let’s find out how to log into RouterOS at 192.168.88.1, and also look at the problems that may arise when doing so. And especially when you cannot enter the router settings at the specified address 192.168.88.1.

Many of our customers try to bypass MikroTik routers. The reason is that they are difficult to set up. From their words, it follows that the RouterOS operating system is too complicated and very loaded with various settings. This complicates the operation of the router for an ordinary user, since it is difficult for him to find and configure the desired function in his own way. But, if you look from the other side, then this allows you to very accurately or, as many say, fine-tune the MikroTik router. After all, routers from this manufacturer are inexpensive, reliable and have excellent performance.

And if you look a little more carefully, then there is nothing complicated in setting up Mikrotik. Basic settings are immediately provided on the main page. Among them, setting up wireless wi-fi, connecting to the Internet, editing the password for accessing the web interface. The user only needs to connect to the MikroTik router via a network cable or using wi-fi, and then go to the IP address with the value 192.168.88.1 through any of the browsers used. Then set the parameters and just save.

How to go to MikroTik settings

The router itself, which needs to make or change the settings, must be connected to the device from which we will make these settings. Wi-Fi (p) can be used. The first time you log in, the network will be open, that is, without the need to enter a password. Or you can use a regular network cable. Not all models are equipped with a network cable when purchased, so it can be bad with this.

The device from which we connect to the router must be activated to automatically obtain an IP address. As a rule, in modern PCs, it is always the same by default. If the web interface of the router does not open, then immediately check this particular parameter.

To access the control panel of the MikroTik router, you need to type in the address https://192.168.88.1 in the browser. You can use any browser you are used to.

enter, interface, camera

And this is how the RouterOS web interface will look like:

How to embed IP camera into a Web Page

From the screenshot above, you can see that the main page allows us to enter almost all the parameters we need. Of course, if it becomes necessary to forward ports or do something else, you will have to understand the settings a little deeper. But now we don’t need it.

Now let’s figure out why you can’t log into 192.168.88.1

The most popular problem is that the user cannot open the settings when accessing the IP address 192.168.88.1. That is, the page does not open. In this case, an error may appear, where there will be something of the type:

In such cases, you need to use the following solutions:

We make sure that we have set the previously said “Automatic receipt of all addresses” in the properties of the IPv4 protocol.

You need to check if your device is connected directly to the MikroTik router. Internet access is not required to access 192.168.88.1.

By default, there is no need to enter a password when entering RouterOS settings. It can be set. But if a request appears to enter a password that you do not have and you do not know it, or the error “Invalid password” is displayed, then simply reset the settings of the Mikrotik router.

You can still try to open the control panel from another browser. Or you can even try to use a different device.

We hope that you could easily enter the settings of your MikroTik router, or our recommendations (p) helped you do it. The vast majority of users do not have any problems. As you can see, everything is much simpler, even than with other routers from more popular manufacturers. Easier because by default there is no password for the wi-fi network and for access to the web interface itself.

READ  How The Surveillance Camera Works

Ip camera web interface

A web interface is a collection of tools that help a user interact with any application or site. Also, the web interface is used to control network devices, in our case, an ip-camera.

Let’s highlight the main features of the web interface:

  • reset to factory settings;
  • change the administrator password for entering the web interface;
  • change ip-address;
  • change the http port, for example, from 80 to 82. The general view of the address bar in the browser will change to 192.168.1.3:82;
  • watch video in real time;
  • change the time and date, set up synchronization;
  • configure dynamic DNS or static;
  • connect FTP;
  • configure sending mail;
  • backup data configuration.

How to enter the IP camera interface

In this age of modern technology, there are many useful features. One of which is the ability to connect to a network video camera. Each digital device has its own web interface. The question arises how to log into the camera by ip-address?

To enter the camera by ip, you need to fulfill a number of conditions:

  • the camera must be connected to a local network (some kind of network device with a rj45 connector, it can be a router, switch or just a computer) and power must be supplied to it;
  • you need to find out the ip-address of the digital video camera;
  • you need to know the authentication data, login and password;
  • a digital video surveillance camera must be on the same network with the device from which we will enter the web interface, for example, let it be a personal computer.

Sequencing

We find out the address of the video camera and authentication data (login and password).

If the ip-camera is new out of the box, then look in the instructions.

If it was installed a long time ago, then most likely its standard ip-address was changed. To do this, we install software, the so-called universal network scanners, for example Angy IP Scanner.

For the authentication data, see the instructions. Standard login: admin password: admin

Next, we change the PC address so that the camera and the computer are on the same network.

Example. For the ipv4 video camera 192.168.1.3, on the PC we put 192.168.1.99 with the mask 255.255.255.0.

We open the browser. Enter the ip-address of the ip-camera into the address bar.

If you can’t log in, then we try to add a port. Example 192.168.1.3:81 or so 192.168.1.3:82

In this age of modern technology, there are many useful features. One of which is the ability to connect to a network video camera. Each digital device has its own web interface. The question arises how to log into the camera by ip-address?

To enter the camera via ip, you need to fulfill a number of conditions:

  • the camera must be connected to a local network (some kind of network device with a rj45 connector, it can be a router, switch or just a computer) and power must be supplied to it;
  • you need to find out the ip-address of the digital video camera;
  • you need to know the authentication data, login and password;
  • a digital video surveillance camera must be on the same network with the device from which we will enter the web interface, for example, let it be a personal computer.

Ip camera web interface

A web interface is a collection of tools that help a user interact with any application or site. Also, the web interface is used to control network devices, in our case, an ip-camera.

Let’s highlight the main features of the web interface:

  • reset to factory settings;
  • change the administrator password for entering the web interface;
  • change ip-address;
  • change the http port, for example from 80 to 82. The general view of the address bar in the browser will change to 192.168.1.3:82;
  • watch video in real time;
  • change the time and date, set up synchronization;
  • configure dynamic DNS or static;
  • connect FTP;
  • configure sending mail;
  • backup data configuration.

Sequencing

We find out the address of the video camera and authentication data (login and password).

If the ip-camera is new out of the box, then look in the instructions.

If it was installed a long time ago, then most likely its standard ip-address was changed. To do this, we install software, the so-called universal network scanners, for example Angy IP Scanner.

For authentication data, see the instructions. Standard login: admin password: admin

Next, we change the PC address so that the camera and the computer are on the same network.

Example. For the ipv4 video camera 192.168.1.3, on the PC set 192.168.1.99 with the mask 255.255.255.0.

We open the browser. Enter the ip-address of the ip-camera into the address bar.

If you can’t log in, then we try to add a port. Example 192.168.1.3:81 or so 192.168.1.3:82

To enter the WEB-interface, download the program for searching IP cameras in the local network IP-Hunter.

Run the program, go to the “General” tab, select a camera in the list and click on the “Local”. “GO” button, or double-click on the highlighted IP camera. The camera will always be detected automatically without clicking on “Search”. If the list of cameras in the local network is empty, then the IP camera is in reboot mode or there is no connection with the camera.

Dahua Technology

Dahua Config Utility. Perhaps the most advanced utility, in addition to searching and setting addresses, allows you to get extended information about the camera, create presets and apply them to groups of cameras, massively update firmware, set the time on cameras and reset cameras to factory settings.

You may also find it useful:
Default IP: 192.168.1.108
Default login: admin or 888888 or 666666
Default password: admin or 888888 or 666666 (login and password are the same)

How to find an IP camera? How to find the IP address of the camera?

Having connected the IP camera to the network, the task arises to find its IP address for initial configuration. In this article, you will find the main ways to find out the IP address.

READ  How to connect a camera as a WEB-camera to a PC

The easiest way to find a camera. use a utility to find cameras from the manufacturer:

Any camera with ONVIF support

Panasonic ONVIF Configuration Tool. A utility from Panasonic to search for IP cameras of any manufacturer and set most of the settings to them. Separately, I would like to note the useful functionality of obtaining rtsp addresses for each stream from the camera (Stream URI parameter).

Wisenet Samsung (Hanwha Techwin)

Samsung IP Installer. A utility from Samsung for searching IP cameras and setting them IP addresses.

You may also find it useful:
Default IP: 192.168.1.200
Default login: admin
Default password: 4321

Panasonic

Panasonic Easy IP Setup. The smallest utility presented. Does not contain anything superfluous. just finds cameras and allows you to assign them IP addresses.

You may also find it useful:
Default IP: 192.168.0.10 on old cameras 192.168.0.253
Default login: admin
Default password: 12345

Axis Communications

Axis IP Utility. Axis utility for searching IP cameras and setting them IP addresses.

You may also find it useful:
Default IP: 192.168.0.90
Default login: root
Default password: pass

Hikvision

Hikvision Tools. A set of utilities from Hikvision, in addition to searching and setting addresses, allows you to reset cameras to factory settings, and also contains several useful calculators.

You may also find it useful:
Default IP: 192.0.0.64 or 192.0.0.68
Default login: admin
Default password: 12345

How to find an IP camera on the network via the web interface of the router

Before you download extra third-party software to your PC, it is better to look at the webcam address on the router. To do this, you need to go to the router interface. This is done using a browser: type 192.168.1.1 into the address bar. this is the standard address for most of these devices. On the login and password entry page, enter the word “admin” (without quotes) in both fields. These are standard “keys” to the router. Leaving them like this is not recommended, if the password or user has already been changed, then enter the required data.

Next, we are interested in the item “Status”. If the camera is connected via WI-FI, then go to the WLAN menu, if via the standard Ethernet connector. LAN.

Further in the sub-items there is an information panel called “LAN-Side Devices”, where you can see:

  • device type;
  • IP address within the network;
  • MAC address;
  • operating time of this connection.

The items in the menu differ depending on the router manufacturer and firmware version. But the essence is the same. Look for similar items.

If you can’t find the information you need, you can check with the router manufacturer in which section it is listed or contact your provider.

Finding the IP address of the UPnP camera through Ivideon Server

A UPnP (Universal Plug and Play) webcam is also called a “smart” webcam. You can try to find such a device through the Ivideon Server application, just make sure the UPnP function is enabled first. Then right-click on “IP Cameras” and select “Search for IP Cameras (UPnP)”. By clicking on the found device, you will see all information about it, including IP addresses.

The program will search for the camera on the network with which the device is connected. You will not be able to find a camera that is on a different network.

This method is the simplest. By connecting one of these to the Ivideon service, you can save yourself from additional settings. And, of course, you can store data in the cloud, control the device through an application on a computer or phone, and enjoy other benefits of our service.

How to find the IP address?

You can find out the IP address of a video surveillance camera in different ways. But in any case, first check that the equipment is connected correctly:

  • The computer and the device must be on the same network.
  • The camera must be powered and connected to the network. There are only two ways to connect to the network. WI-FI and Ethernet.

Some devices are powered by PoE technology. That is, electricity is supplied through the Ethernet connector. The only difference is the cable, which at the other end has an output for connecting to a PoE injector. If such a model is connected to a regular Ethernet cable, then it will not work.

All webcams have two IP addresses. internal and external. All of the methods below will help you determine the internal. The external address can only be found by viewing the settings of the router. Finding your device on the huge worldwide network will be impossible without this. But knowing the internal IP, you can easily find out or configure the external.

You can find out the IP address of the camera in several ways:

  • for cameras with UPnP support. search through Ivideon Server;
  • on the web interface of the router;
  • using network scanners.

Finding the IP address of a CCTV camera through third-party programs

This method is the most difficult and is needed in rare situations, which are an exception to the rule:

  • you do not have access to the router’s web interface;
  • you connect more than a hundred cameras at once;
  • you don’t know how many cameras are connected to the network.

Scanners are usually provided by the companies that make the devices themselves. Here is a list of companies that have developed software to find their cameras:

  • Beward
  • Microdigital
  • RVI
  • Ubiquiti aircam
  • DAHUA
  • IPEYE

If you are using a model from another company, then two free programs are suitable for you: Advanced IP Scanner and Angry IP Scanner. Their interface is approximately the same. All you need to enter is a range of addresses to search for. The standard local IP of your router is 192.168.1.1. the first two values ​​are unchanged for any local network, the third digit, in our case “1”, is the subnet number, and the last is the unique device number.

READ  Ip camera does not connect to WI-FI

So if the address of your router is 192.168.1.1, then the IP ranges of the surveillance cameras will look like this: 192.168.1.1. 192.168.1.255. The third digit depends on the value of your subnet, it can change, the rest. not.

After entering the data, press the “Scan” button and in the main field the program will display all available devices on the network, indicating the ping and IP address. The search process may take some time.

On a typical home network, it will be enough to simply find out which device is the camera. you need to apply the exclusion method.

How to find the IP camera address

IP cameras differ from analog cameras not only in resolution, digital protocol, but also in the way they are connected to a recording device. If it is enough to connect an ordinary camera to a video recorder or the input of a video capture card and you can enjoy seeing the image from this camera, then in order to view the image from an IP camera, you need not only connect it to a computer or computer network through a switch, you also need to find out its IP address.

How to find the IP address of a video camera?

Firstly, if there is an instruction for the video camera, it should contain what IP address is set in the camera by default. If the IP camera is not new, then it is possible that the IP address has been changed in it, then reset the camera settings to factory defaults. press the reset button.

Accessing via Web Browser Hikvision DVR/NVR 100% Working

  • Beward. 192.168.0.99 Login: admin, password: admin
  • Dahua. 192.168.1.108 Login: admin, password: admin
  • Microdigital. 10.20.30.40 Login: root, password: root
  • Novicam. 192.168.0.88 Login: admin, password: none
  • Aircam. 192.168.1.20 Login: ubnt, password: ubnt
  • IPEYE. 192.168.0.123 Login: admin, password: 123456
  • Hikvision. 192.0.0.64 Login: admin, password: 12345
  • Polyvision. 192.168.1.10 Login admin, password: none
  • Space Technology. In old cameras, DHCP is enabled by default, the camera can be found and the IP address can be viewed / changed using this program. Login: admin, password: 12345, new. Default IP: 192.168.0.100
  • MATRIXtech. 192.168.1.120 Login: admin, password: 1111
  • Giraff. 192.168.1.10 Login: admin, no password

Here I would like to note that you should not connect several IP cameras to one network at once, especially if these are cameras from the same manufacturer. Because they all initially have the same IP address, then there will be a conflict in the network. First connect one IP camera, change its IP address in accordance with your subnet, then the second, etc.

Secondly, each IP camera must come with software that will allow you to quickly find the connected camera on the network, if necessary, change this address and make all the necessary settings. On this page we will post links to similar software if you suddenly lost the CD that came with the IP camera and cannot determine the IP address of this camera.

Thirdly, in order to find out the IP address of the camera, or other device (router, router, modem, another computer connected to your network), you can use a simple program to scan IP addresses. An example of such a program is the Angry IP Scan utility. With the help of this simple program with an intuitive interface, you can not only scan all IP addresses on your network, but also find out the MAC address of the device and its response speed.

It is enough to specify the range of addresses to be scanned in the program and press the START button, and all scanned addresses will appear in the list. Available IP addresses will be marked with a blue circle. If you do not know the subnet of your IP camera, enter the range 192.168.0.0. 192.168.255.255, while scanning can take quite a long time.

By the way, with the help of this simple program you can detect all unauthorized connections to your wireless network in order to further blacklist their IP addresses on your router.

Below we provide a list of programs for determining the IP addresses of specific IP cameras:

In order to find out the IP address of a digital video camera, you can use universal software that supports a large number of different IP cameras, for example, Macroscop or Line software.

In conclusion, I think it will not be superfluous to remind you that for successful collaboration, the IP address of your computer and the address of your IP camera must be on the same subnet, i.e. the penultimate numbers of IP addresses must be the same. This applies not only to IP cameras, but also to all digital devices operating in the same computer network.