enter, bios, lenovo

How to go to BIOS on Lenovo laptop?

Usually with the entrance to the BIOS settings there are no problems. However, some models of Lenovo laptops have certain features of entry into BIOS and standard methods for getting into it do not provide opportunities. In this article, you will learn about all the ways that can go to BIOS on Lenovo laptops.

Now a complete list of ways that can be found in BIOS on Lenovo laptops will be given:

  • F2 key;
  • F2 key, with a fn button on the keyboard;
  • Specialized button novo button;
  • Key F1;
  • ESC key;
  • Through the parameters built by EFI.

Further, all of the above methods will be considered in more detail.

Entrance to BIOS on Lenovo button F2

This method is worth trying the first thing. Turn off the laptop, press and hold F2 on the keyboard and without releasing it, turn on the laptop.

If the entrance to the BIOS did not occur, then try to do the same, just pre.press the FN button in the lower left part of the keyboard.

BIOS entry options on Lenovo laptop

An ordinary user rarely needs to go to BIOS, but if, for example, it is required to update Windows or make any specific settings, then you have to enter it. This process in Lenovo laptops may vary depending on the model and release date.

We enter the BIOS on Lenovo

There are a special button on the newest laptops from Lenovo, which allows you to launch BIOS when rebooting. It is located near the power button and has a note in the form of an icon with an arrow. The exception is the IDEAPAD 100 or 110 laptop and similar state employees from this line, since they have this button on the left end. As a rule, if there is one on the case, then it should be used to enter BIOS. After you click on it, a special menu will appear where you need to select “BIOS Setup”.

If for some reason there is no this button on the laptop case, then use these keys and their combinations for models of different lines and episodes:

  • Yoga. Despite the fact that the company produces many different and dissimilar laptops under this trademark, on most of them, either F2 or a combination of FNF2 is used for the entrance. On more or less new models there is a special button for entering;
  • Ideapad. This line mainly includes modern models equipped with a special button, but if it wasn’t or it has failed, then F8 or Delete can be used as an alternative to entering BIOS.
  • For budget devices for the type of laptops-B590, G500, B50-10 and G50-30 only a FNF2 keys combination is suitable.

However, some laptops have other entry keys that are different from those in the list above. In this case, you have to use all the keys. from F2 to F12 or Delete. Sometimes they can be combined with Shift or FN. Which key/combination should be used depends on many parameters. laptop model, serial modification, equipment, etc.D.

The necessary key can be found in the documentation for the laptop or on the official website of Lenovo, driving in the search your model and finding basic technical information for it.

It is worth remembering that the most running keys for entering BIOS on almost all devices are F2, F8, Delete, and the most rare ones are F4, F5, F10, F11, F12, ESC. During the reboot, you can try to put on several keys (not at the same time!). It also happens that when loading on the screen, the inscription with the following M “Please Use (the desired key) to enter setup” does not last long, use this key to input to enter.

Entering BIOS on Lenovo laptops is quite simple, even if you did not succeed on the first attempt, then most likely you will do it from the second. All “incorrect” keys are ignored by a laptop, so you do not risk your mistake to break something in his work.

Use the Novo button to enter BIOS on Lenovo laptops

Some Lenovo models have a special novo button to replace the BIOS configuration key. It is usually located next to the power connector with the logo. If you have a novo button on your laptop, you can introduce BIOS much easier. All you need to do is to press the Novaya button when your laptop is turned off. Then the laptop will turn on automatically and show you the menu. You can choose the Bios Setup in the menu to enter the BIOS.

Here are the keys for entering BIOS for different models of Lenovo laptops.

Lenovo model
BIOS setup key
Series IDEAPAD N F2
Series Ideapad p F2 on Lenovo logo
Series IDEAPAD S New button, some models: F2
Series IDEAPAD U New button, some models: F2
Series Ideapad v F2
Series Ideapad Y F2
Series Ideapad Z New button, some models: F2
Series b New button, some models: F2
Series E New button, some models: F2
Edge Series Button new
Series FLEX Button new
Series G F2
Series K F1
Series M F1
Series N F2
Series S Button new
Series V F1
Series y Button new
Series Z Button new
A series of yoga Button “Novy”, some models: F2 / (FN F2)
ThinkPad Yoga 12 F1

Windows 8 (8.one)

The output of the Windows 8 operating system almost coincided with mass implementation, including Lenovo portable computers, the new version of BIOS. UEFI. For users, a new version of the basic input-output base brought a lot of interesting opportunities, including a new way to enter the BIOS-reboot from the OS.

    In Windows 8, call the “Computer Parameters” window. To do this, you can open the side panel on the desktop, bringing the mouse cursor to the lower right corner, press the “Parameters” button, then click on the inscription: “Change in the computer parameters”.

Or on the initial screen of the Metro-intese, click on the button with the image of the gear.

Windows 10

In the newest version of the Windows operating system, the possibility of rebooting in UEFI using the “Special load options” was inherited from Windows 8. Only a call call “Computer Parameters” is different.

Additionally: for quick rebooting for the diagnostic and restoration screen, you can use the command line (this method also works in Windows 8/8.one).

    We launch the command line on behalf of the administrator, clicking on the “Start” button and from the open menu by selecting the “command line (administrator)”.

Common errors when using the method

The situation when the parameters of the built.in UEFI is absent on the screen “Additional parameters”,

  • The device uses the old version of BIOS without UEFI support;
  • The operating system was installed in the loading mode of “Legacy” and the interaction functions with UEFI from the loaded Windows are not available.

Tip: In order for the future to enter the BIOS laptop settings using the keyboard keyboard when turning on the device, you can disable the “Fast Launch Windows 10” function. For this:

    In the “Control Panel” we select the “Power” item “.

NOVO button

Lenovo laptop owners of the ThinkPad line, as well as some other models, can go to the BIOS without using the key combinations. just apply a special Novo button located next to the power button or at the device end of the device.

Having turned off the Lenovo laptop, you should press on Novo and hold it for a few seconds; Having chosen the BIOS Setup item in the window that has appeared, the user will finally go to BIOS-and continue to work in the base system of input and output.

Tip: Sometimes instead of the Novo button on the device case is a special hole, near which the same icon is placed. In this case, you can open the BIOS menu by inserting a special paper clip in the connector for an iPhone or smartphone or ordinary stationery and slightly pressing contact for two to three seconds.

Shift key

By holding and holding this key (no matter, right or left) and holding it during a reboot, you can go to BIOS on Windows 10. in particular, on some models of lanovo laptops. The method works quite rarely, however, it is not worth neglecting it. at least because, by holding Shift, you will not have to rush with key combinations.

To enter the BIOS on Lenovo laptops under the control of “Eights” or “Dozens”, you can use the built.in Windows option:

  • In the section “Special loading parameters” click on the “Reloading now” button. It is important to remember: the process will begin immediately and without additional requests, and therefore, before clicking, it is necessary to close open documents, save the changes made to the system and take other precautions.

Important: although the theoretically indicated algorithm should launch UEFI, on lanovo laptops by default, it is BIOS for the initial load. In addition, even if the owner finds himself in an “expanded integration”, he will be able to fulfill all his tasks in it, bypassing the basic input-output system.

Hardware reset of settings (only for experienced users)

Since the entrance to the user integration is impossible, the settings are resetled by manual (hardware) in the way, which can be done as follows:

  • Turn off the laptop, turn off the power cord and remove the battery.
  • Remove all the small removable lids in the back of the laptop body, under which there are RAM planks, hard drive, network Wi-Fi card and other devices.
  • Carefully inspect the entire area under the lids removed and find, t.n. BIOS Battery, which has the following view:
  • If next to removable devices (hard disk, RAM, etc.D.) the battery cannot be found, perhaps it is located under them. Remove the electronic components and inspect the area under them.
  • If there are no batteries under them, remove the entire back cover of the case.
  • Depending on the design of a particular model of the Lenovo laptop, the BIOS-battery can be located in the area under the keyboard.
  • In all other cases, the laptop will have to be disassembled fully.
  • As soon as the battery is found, remove it from the nest.
  • Wait for about 30 seconds and install the BIOS Battery in your place.
  • BIOS/UEFI settings will be reset.

Flashing BIOS/UEFI

Over time, the BIOS and UEFI micro.opram are finalized by manufacturers. If the operating system has never been reinstalled on the laptop and/or the Lenovo system applications were not removed, then when the updated version is released on the screen, the corresponding message is displayed or the update is performed in automatic mode. If for some reason this did not happen, BIOS and UEFI can be updated on your own.

  • Press the “Winr” keys at the same time.
  • Enter the “cmd” in the opening window and click OK “.
  • The command line will open.
  • Enter the command in the window. “WMIC BIOS Get Smbiosbiosversion”, and then press the input key. The following will happen:
  • The inscription “Smbiosbiosversion” will present the current version of BIOS. Write down or remember it.
  • Go to the Lenovo. Support support site.Lenovo.com.
  • In the search line “Find your product”, enter a laptop model. For example. “T460”.
  • On the page of the laptop, find the “Best Loadings” section, and then click on the item nearby. “View All”.
  • The page will display a list of categories of devices for which updates are available.
  • Find the section “BIOS” or “BIOS/UEFI” and click on it.
  • There may be several points in the section. Find “BIOS Update Utility for Windows”.
  • Opposite the item will be displayed the latest version of BIOS/UEFI.
  • If it is higher or corresponds to the one that was obtained by the execution of the corresponding command line command, click on the BIOS Update Utility for Windows, and then click on the download button.
  • A file in the form “xxx.exe “, where instead of” xxx “a set of characters will be indicated.
  • Launch the installer and select the “Install” item.
  • At the end of the unpacking, a new window will open, in which you should press the “Flash BIOS” button.
  • Press the OK button to start the BIOS/UEFI update process.
  • After rebooting, try to enter the BIOS/UEFI user integration one of the ways given at the beginning of this article.

When installing the same BIOS version that was already on the computer, settings will be reserved.

Button on the case. “Novo button

Most Lenovo laptops models are equipped with a special button on the “Novo button” housing. It can be located on the side or on the front panel next to the power button. It is usually marked with an icon in the form of a curved arrow.

To go to the BIOS on the Lenovo laptop using a button, click on Novo Button on the device off instead. The laptop will start, and a window with a small service menu will be displayed on the screen. Using the arrows on the keyboard, select the BIOS Setup item and click on the Enter key. After that, the entrance to the base input-output system will be reached.

In modern models, the Novo Button button is hidden in a small hole. Usually it is located on the side and marked with the same icon. an arrow similar to an inverted letter U. For example, on the Lenovo IDEAPAD 320-15SK laptop, the hole is located on the left near the USB ports. To go to BIOS, you will need to use a paper clip or needle. Connecting the button avoids random pressing.

Some devices from Lenovo are equipped with a blue button called “Thinkwantage”. With its help, the loading menu of the laptop opens. “Thinkwantage” will need to be clicked immediately after launching the copueter, when the Lenovo logo appears on the screen. In the displayed menu there will be a hint, which keys should be pressed to call certain functions. In most cases to enter BIOS, this is a F1 button.

Special keyboard keys

Depending on the model of the Lenovo laptop, the entrance to BIOS can be carried out by various keys. F1. F2 and others. For example, in B560 only the F2 key works. It is enough to turn on the device, wait for the loading window and press the desired button on the keyboard. As a rule, in a welcoming window, a hint is displayed below.

FN F2 combination can also work. To use it, turn on the laptop and in the initial phase of the system loading, hold the FN key. Then, not letting it go on F2. After that, the main BIOS window will open.

How to enter the BIOS on Lenovo laptop

So, we will carefully consider the procedure for opening BIOS on laptops from Lenovo. We first recommend that you study the operating instructions for the laptop of your model. In the event that you don’t have instructions at hand, it can always be downloaded or read online by going to the website of the manufacturer.

To go to BIOS on the Lenovo laptop, you need to do the following actions:

  • The first and most important point is the mandatory connection of your laptop to power from the network. This is important, because if the power supply is unexpectedly disappeared during various operations with BIOS, this can lead to very negative consequences for your computer, up to its breakdown.
  • In most cases, in order to get into the BIOS on laptops of the Lenovo manufacturer, it is necessary when turning on the keyboard on the F2 key or on the combination of the FN and F2 keys.
  • However, keep in mind that some of the models may not react to these presses. Lenovo often likes to experiment with key redescents on different models of devices. That is why, in the event that the previous advice did not help, try to press the following keys when turning on and for some time: F1, Delete, F3, ESC, F8, F10 or use the CTRLLTDELETE keys (you need to squeeze them all together when turning on when turning it on laptop).
  • There are some laptop models (for example, Lenovo G50), which have a separate button for entering the BIOS, and it is located on the side panel, usually not far from the connector for connecting the power cable. There are times when this button can be next to the laptop button. On such models of devices, in order to go to BIOS, you must first turn off the laptop itself, and only then press the entrance button.
  • For those laptops that have a special service button for entering BIOS, a special service menu may appear before loading on the monitor screen. In this menu, in most cases, there are several points. As a rule. this is a regular load (Normal Startup), Boot menu (Boot Menu), System Recovery restoration and BIOS settings (BIOS SETUP). Accordingly, in order to get into the BIOS system, select the last option.
  • If everything is done correctly, then the standard BIOS menu will appear. On all models of devices, this menu looks approximately the same.

How to install BIOS yourself

Preparation for installation

BIOS is a certain basic software (software) of devices that allows you to interact, for example, with a personal computer without contacting its hard drives. BIOS itself is sewn in the ROM chip on the motherboard of the apparatus. Often, when the system is launched, data from ROM chip to RAM (RAM) of the device is performed.

LENOVO THINKPAD 13. How To Enter Bios And Boot Menu Option | Boot from USB

In the vast majority of cases, BIOS is a standard software whose menu looks approximately the same on personal computers and on portable devices, for example, on laptops. As a rule, it works rather harmoniously and without failures. However, such a situation may arise when microcodes are not well.well developed or a visible inconsistency of the motherboard with integrated devices, or a much more modern equipment has appeared. In such cases, you may need a bios reinstall or, in other words, its flashing.

It is extremely important to understand that independent installation of BIOS is a rather complex and laborious process. That is why people who feel uncertainly in working at a computer, it is better not to try to independently review the basic by devices. For recharge, special, original utilities are required, usually contained on a special disk, which is included in the kit for the motherboard. Using “native” utilities for flashing, you exclude the chance of various kinds of failures and errors that may occur when using programs from other sources.

BIOS update of various devices

The procedure for updating the BIOS version of any device has approximately the following view:

How to go to BIOS on Lenovo laptop

Lenovo is one of the most popular laptop manufacturers. By the way, I must tell you (from personal experience), laptops are quite good and reliable. And there is one feature of some models of these laptops. an unusual entrance to BIOS (and it is often necessary to enter it, for example, for Windows reinstalling).

enter, bios, lenovo

In this relatively small article, I would like to consider these features of the entrance.

Entrance to the BIOS on the Lenovo laptop (step.by.step instructions)

1) Usually, to enter the BIOS on Lenovo laptops (on most models), it is enough to press the F2 button (or FNF2) when it is turned on.

However, some models may not react at all to these presses (for example, Lenovo Z50, Lenovo G50, and in general, the model range: G505, V580C, B50, B560, B590, G50, G505S, G570, G570E, G580, G700. Z500, Z580 may not respond to these keys).

2) the above models on the side panel (usually next to the power cable) have a special button (for example, the Lenovo G50 cm model. rice. 2).

To go to BIOS you need: turn off the laptop, and then press this button (the arrow is usually drawn on it, although I admit that there may not be arrow on some models).

By the way, an important point. Not all models of Lenovo laptops, this service button is located on the side. For example, on the Lenovo G480 laptop. this button is next to the laptop button (see. rice. 2.one).

3) If everything is done correctly, then the laptop should turn on and the service menu with four points appears on the screen (see. rice. 3):

To enter the BIOS. select BIOS Setup (installations and settings of BIOS).

How To Get into Bios Lenovo Ideapad 100

4) Next should appear the most ordinary BIOS menu. Then you can configure BIOS similarly to other models of laptops (the settings are almost identical).

By the way, maybe someone will need to: in rice. 4 shows the Lenovo G480 BOOT section Section for installing Windows 7:

  • Boot Mode: [Legacy Support]
  • Boot Priority: [Legacy First]
  • Usb boot: [enabled]
  • Boot Device Priority: PLDS DVD RW (this is a drive with Windows 7 loading disk, note that it is the first on this list), Internet HDD.

After changing all the settings, do not forget to save them. To do this, in the Exit section, select “Save and Exit” (save and exit). After rebooting the laptop. the installation of Windows 7 should begin.

5) there are certain models of laptops, such as Lenovo B590 and V580C, where the F12 button may need to enter the BIOS. Holding this key immediately after turning on the laptop-you can get to Quick Boot (fast menu)-where easily change the download procedure for various devices (HDD, CD-ROM, USB).

6) and the F1 key is very rarely used. You may need it if you use the Lenovo B590 laptop. The key must be pressed and kept after turning on the device. The BIOS menu itself is not much different from the standard.

The manufacturer recommends that the laptop battery is enough before entering BIOS. If in the process of setting up and installing the parameters in the BIOS the device is emergency turned off (due to a lack of power), maybe problems in the further operation of the laptop.

Honestly, it’s not ready to comment on the latest recommendation: I never experienced problems when turning off the PC when I was in the BIOS settings.

BYRGPUB.COM 2022