The Troubleshooter utility, which is included by default in every edition of Windows 10, can solve many different problems. We will need one of its functions in this method. You need to do the following:
- Open the “Start” window by clicking on the button with the same name on the desktop. On the left side, find the “System. Windows” folder and expand it. In the list of attached applications, click on the item “Control Panel”.
Next, run the “Troubleshoot” utility from the “Control Panel” window that opens. For a more convenient search, you can activate the “Large icons” content display mode.
In the window that opens after this, you need to click on the line that we marked in the next screenshot.
Click on the line “Run as administrator” that appears. As the name suggests, this will restart the utility with maximum privileges.
After restarting the window, left-click again on the “Advanced” line.
Next, you should select the “Automatically apply fixes” option and click the “Next” button.
After a while, a list of such software will appear. Unfortunately, very often the problematic application does not appear in the resulting list. Therefore, we recommend that you immediately select the item “Not in the list” and click the “Next” button.
In the next window, you must specify the path to the executable file of the program with which there are problems when starting. To do this, click “Browse”.
A file selection window will appear on the screen. Find it on your hard disk, select it with a single click of the LMB, and then use the “Open” button.
Then click the “Next” button in the “Troubleshoot Compatibility” window to continue.
An automatic analysis of the selected application will begin and identify problems with its launch. As a rule, you will need to wait 1-2 minutes.
In the next window, click on the line “Program Diagnostics”.
From the list of possible problems, you need to select the very first item, and then click the “Next” button to continue.
At the next stage, you must specify the version of the operating system in which the previously selected program worked correctly. After that you need to click “Next”.
As a result, the required changes will be applied. Additionally, you can check the performance of the problem software with new settings. To do this, click the “Check program” button. If everything works as expected, then in the same window, click “Next”.
This completes the process of diagnosing and fixing problems. You will be prompted to save any previously made changes. Click the button “Yes, save these parameters for the program”.
The saving process takes some time. Wait until the window below disappears.
A short report will be presented below. Ideally, you will see a message that the problem has been fixed. All that remains is to close the “Troubleshooter” by clicking on the button with the same name.
By following the instructions described, you can easily use the “Compatibility Mode” for the desired application. If the result is unsatisfactory, try the next method.
Enabling Compatibility Mode in Windows 10
The vast majority of software developers are trying to adapt their product for new versions of Windows. Unfortunately, there are exceptions. In such situations, difficulties arise with the launch of software that was released a long time ago. In this article, you will just learn about how to resolve the issue of software compatibility on devices running Windows 10.
Activating Compatibility Mode in Windows 10
We have identified two main ways to solve the problem that was voiced earlier. In both cases, the built-in functions of the operating system will be used. This means that you do not need to install additional software. Just follow the instructions below.
Change shortcut properties
This method is much simpler than the previous one. To implement it, you need to perform a few simple steps:
On the shortcut of the problematic program, right-click. From the context menu that opens, select the “Properties” line.
A new window will appear. In it, navigate to the tab called “Compatibility”. Activate the “Run this program in compatibility mode” function. After that, from the drop-down menu below, select the version of Windows in which the software worked correctly. If necessary, you can check the box next to the line “Run this program as administrator”. This will allow you to run the application with maximum privileges on an ongoing basis. Finally, click the “OK” button to apply the changes.
As you can see, running any program in compatibility mode is not difficult at all. Remember that it is better not to enable the specified function without need, since it is this function that sometimes causes other problems.
Self-lock screen in Windows 10
You can lock the screen of a PC or laptop using key combinations. specially designed for this purpose or providing access to a menu, one of the options of which solves our problem.
Enabling Windows 10 Startup Lock
Sometimes you can face a different task from the one discussed above. the need to activate the lock when Windows starts. As we have already said, by default, “ten” after turning on the computer does not open on the desktop, but on the lock screen. But the latter can either be absent altogether, or be loaded automatically, without requiring a password or pin code from the account. This behavior can be caused both by certain problems in the operation of the OS, and by its incorrect configuration. Next, we will consider how to restore the functionality of the function of interest to us today.
Editing the registry
It also happens that the lock screen does not appear at all when Windows starts. This means that this feature has been disabled. You can reactivate it by making some changes to the system registry.
Press the “WINR” keys to open the “Run” window, enter the regedit command in it and press “OK” or “ENTER”.
In the Registry Editor window that opens, navigate to the following location:
Note! If the “Personalization” section is missing from the above path, it must be created. To do this, being in the “Windows” folder, click on an empty space with the right mouse button (RMB), select the only available item “Create”. “Section”. Give an appropriate name and open it.
Right click and select “New”. “Parameter DWORD 32 bits”.
Name it “NoLockScreen”, open it, set the value to “0” and click “OK” to confirm.
Note: If you want to turn off the lock screen again, this parameter should be set to “1”.
This will be enough for the changes to take effect, but it will be possible to make sure that the function is working only after a reboot.
On keyboards of many laptops there is a screen lock option, which usually works in tandem with “Fn” and is located on one of the F-keys, next to them (for example, on “ESC”), in or near the NUM-block. Most often, a lock is drawn on it, but sometimes it is another symbol that is directly associated with a lock or is close to it. A similar button can be found on some multimedia, gaming, and universal keyboards (designed for devices with different operating systems using Bluetooth). You need to search in the same F-row or near it. These keys are also often paired with “Fn”.
“WINL” is a pair of keys, pressing which instantly locks the screen in the top ten both from the desktop and from any other window / application. An exception may be some games where the “WIN” key is automatically disabled.
Note: Most gaming keyboards also have the option to lock “WIN”, so make sure it is available before using the above shortcut.
Turn on the lock screen in Windows 10
By default, in the current version of the OS from Microsoft, in order to get to the desktop after starting the PC, you must unblock access by specifying the password or PIN code from the account. However, there are times when Windows 10 starts bypassing this screen or when you need to turn it on yourself, for example, when you temporarily leave your computer. Let’s talk first about the second, and then about the first.
Change login options (for local accounts)
You can only get access to all the features of Windows 10 with a Microsoft account, but many users continue to use a local account on the operating system. If a password is not set on it, the lock screen will automatically load at OS startup and go directly to the desktop. The solution in this case is to change the login parameters.
Press the “WINI” keys to call the “Parameters” and go to the “Accounts” section.
Open the “Login Options” tab (formerly called “Login Options”), and in it, in the “Device Login Control” block, select “Pin Code” or “Password”, whichever you want to enter to gain access to the operating system.
Next, click on the “Change” button, enter the current password from the account, and then set a new one, confirm it and click “OK”.
Note: If you do not know the current password for the account, use the corresponding link to recover it and read the article provided at the link below.
Log out and log back in, or restart your computer for the changes to take effect.
Windows 10 recovery
If none of the above methods fixed the calculator problem, you can repair Windows 10 to fix the problem. However, remember that restoring Windows 10 will remove all installed third-party programs and applications. See How to reinstall Windows 10 without losing data.
How to get your old calculator back
A familiar application. a classic calculator. is quite easy to return to the system using a small program of the same name. Old Calculator for Windows 10. The special feature of this application is that it is a complete package of calculator files from Windows 8.1 along with an installer. The installation process is the most common, Russian language is present.
Upon completion, the classic calculator is installed in the system in parallel with the main.
Install Calculator in Windows 10
Install the third-party calculator software
4 ways to fix calculator in Windows 10
The Windows 10 operating system includes a built-in calculator app. The new calculator app replaces the classic calculator program, but the ability to launch the classic calculator in Windows 10 remains.
Calculator won’t work or open in Windows 10
From time to time, like other built-in applications, the calculator application refuses to open or immediately closes after launch. If you have problems with the Calculator app in Windows 10, the following steps can help you fix the new calculator app.
Method 1 of 4
Calculator in Windows 10, enabling the accounting history function of calculations
At first glance, the Calculator application in Windows 10 seems simple, but this is still not so, since it contains not only a standard module, but also scientific, programmer modes and a converter. It is a great choice for preparing an invoice, converting measurements in a recipe or other project, doing many brain-scratching, complex math calculations, algebra or geometry problems. In addition, it is also equipped with a history function that helps users check if their calculations are correct.
How to enable history feature in Windows 10 calculator
Sometimes it becomes important for users to keep a record of the calculations they have performed so that they can send it off and make corrections wherever needed in case something goes wrong. For example, you provide a report on accounts and match numbers, you may want to enable the history function.
Enter ‘Calculator’ in the taskbar search bar and open it. To keep track of calculations, you will need to activate the History option.
Enabling the History option in Windows 10 Calculator makes the app work like a desktop calculator with a built-in printer. You see all completed steps.
If you make a mistake anywhere, you can easily pinpoint the problem. To enable or activate the History option in the calculator in Windows 10, select the View History tab or press the CTRLH keys together.
Use the up and down arrows in the upper right corner to move back and forth between steps. Right click on the calculator application open on your monitor to display the options: Copy Paste Hide history Clear history You can also use CtrlShiftD keyboard shortcut to delete history.
Also when clicking on the Copy history. With this, you can insert your calculation history into any other program or use it in a spreadsheet.
Useful keyboard shortcuts for calculator in Windows 10
In Windows 10, Microsoft replaced the good old calculator with a new modern application. Many people don’t know that it has hotkeys. If you’re curious, using keyboard shortcuts (hotkeys), you can use the calculator in Windows 10 more productively. Today we will share the keyboard shortcuts for Calculator in Windows 10.
Open the Calculator app. You can do this by clicking on the icon in the start menu.
Turn Calculation Log On or Off
Selecting the DEG parameter in engineering mode
Selecting the RAD parameter in engineering mode
Selecting the GRAD parameter in engineering mode
Pressing the 10x button in engineering mode
Pressing the cosh button in engineering mode
Pressing sinh key in engineering mode
Pressing tanh button in engineering mode
Pressing the sin-1 button in engineering mode
Pressing the cos-1 button in engineering mode
Pressing tan-1 button in engineering mode
Pressing the Mod button in engineering mode
Pressing the log button in engineering mode
Pressing the dms button in engineering mode
Pressing cos button in engineering mode
Pressing the sin button in engineering mode
Pressing the tan button in engineering mode
Pressing Exp in Engineering Mode
Pressing the Int button in engineering mode
Selecting a DWORD parameter in the “Programming” mode
Selecting the WORD parameter in the “Programming” mode
Selecting the BYTE parameter in the “Programming” mode
Selecting the HEX parameter in the “Programming” mode
Selecting the DEC parameter in the “Programming” mode
Selecting the OCT parameter in the “Programming” mode
Selecting the BIN parameter in the “Programming” mode
Selecting the QWORD parameter in the “Programming” mode
Pressing the A – F Button in Programming Mode
Pressing the RoL Button in Programming Mode
Pressing the RoR button in the “Programming” mode
Pressing the Lsh button in the “Programming” mode
Pressing the Rsh Button in Programming Mode
Pressing the Mod button in the “Programming” mode
Pressing Or in Programming Mode
Pressing the Xor Button in Programming Mode
Pressing the Not Button in Programming Mode
Pressing the And button in the “Programming” mode
Switching the value of a bit in the “Programming” mode
Most of these keyboard shortcuts are the same as in Windows 7 Alculator, but some are different.
Use these hotkeys to save your time. If you know any other keyboard shortcuts, feel free to share them in the comments.
How to bring classic calculator back to Windows 10
woodhummer 01/12/2016. 09:33 Program overview
The built-in Windows calculator is known and used by almost all OS users. Having upgraded to “ten”, many were unpleasantly surprised: the calculator in Windows 10 has a very inconvenient interface, and its functionality, to put it mildly, is “lame”.
Use Winaero Tweaker
To save time, you can use Winaero Tweaker and its Boot and Logon Windows 10X Boot Animation option. It is available since Winaero Tweaker 0.19.1.
How to Enable Your Webcam in Windows 10 | How to Turn On Webcam in Windows 10
How to enable Windows 10X boot animation in Windows 10
- Open the Registry Editor application.
- Navigate to the following registry key: HKEY_LOCAL_MACHINE \ System \ ControlSet001 \ Control. See How To Navigate To Registry Key With One Click.
- Create a new subkey here BootControl.
- In the BootControl section on the right, create a new 32-bit DWORD BootProgressAnimation. Note. Even if you are using 64-bit Windows, you should still create a 32-bit DWORD value.
- Set its value to 1.
- Restart Windows 10.
- New boot logo is now included.
You can restore the default animation by deleting the BootProgressAnimation value from the registry. After restarting Windows 10, the default boot logo will be used.
Again, you need to run Windows 10 Build 19587 or higher to successfully enable the new boot animation. Alternatively, you can use alternative methods to enable it. They are more convenient and faster.
How to enable Windows 10X boot animation in Windows 10
You can now enable Windows 10X boot animations in Windows 10, in its regular desktop version. The boot animation in Windows 10X looks different than in current operating systems for regular PCs. It has an updated logo with WinUI 3 spinning circle instead of Win8 style dots.
Windows 10X. this is Microsoft’s answer to Chrome OS. It was intended to be a lightweight, minimalistic version of Windows. It lacks a lot of what is in full-featured Windows 10. The project already had a history even before the release of the first version.
Windows 10X started out as an operating system for Windows portable devices with two screens, but eventually gained support for single-screen devices for a wide range of consumers.
Windows 10X has a streamlined design and a special way to run applications in containers. Many elements have been visually updated, from icons to animations to the Start menu, taskbar and Action Center.
These changes in Windows 10X will carry over to regular OS editions thanks to the Sun Valley project. new UI slated to hit consumer devices in the second half of 2021 with the 21H2 major release.
One of the new features in Windows 10X. new loading animation with rotating WinUI 3 logo instead of Win8 style circles. You can see him in this video.
Here’s how to enable it in desktop editions of Windows 10. You must have Windows 10 build 19587 or higher.
Alternative ways to enable Windows 10X boot animations
Download ready-made registry files
Also, to save you time, I have prepared the registry files. You can download the ZIP archive from here:
Enable Windows 10X boot logo.reg. includes a new logo using WinUI counter 3.
Disable Windows 10X boot logo.reg. use it to undo the change.
Double click the reg file to add the values from it to the registry and confirm the UAC prompt. That’s all.
You are here: Home »Windows» Windows 10 »How to enable Windows 10X boot animation in Windows 10
How to enable AHCI mode in Windows 10
The AHCI mode of SATA hard drives enables Native Command Queing (NCQ), Device Initiated Power Management (DIPM) technology, and other features such as hot swapping of SATA drives. In general terms, enabling AHCI mode can improve the speed of hard drives and SSDs in the system, mainly due to the advantages of NCQ.
This instruction is about how to enable AHCI mode in Windows 10 after installing the system, if for some reason reinstallation with AHCI mode pre-enabled in the BIOS or UEFI is not possible, and the system was installed in IDE mode.
I note that this mode is already enabled for almost all modern computers with a pre-installed OS, and the change itself is especially important for SSD drives and laptops, since the AHCI mode allows you to increase SSD performance and, at the same time (albeit slightly), reduce power consumption.
And one more detail: the described actions in theory can lead to undesirable consequences, such as the inability to start the OS. And therefore, take on them only if you know what you are doing it for, know how to get into the BIOS or UEFI and are ready, if something happens, to fix unforeseen consequences (for example, by reinstalling Windows 10 from the very beginning in AHCI mode).
You can find out if the AHCI mode is currently enabled by looking in the UEFI or BIOS settings (in the parameters of SATA devices) or directly in the OS (see screenshot below).
You can also open the drive properties in Device Manager and, on the Details tab, view the path to the hardware instance.
If it starts with SCSI, the disk is in AHCI mode.
Enabling AHCI with Windows 10 Registry Editor
In order to use the work of hard drives or SSDs, we need Windows 10 administrator rights and a registry editor. To launch the registry, press the WinR keys on your keyboard and type regedit.
- Go to the registry key HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ iaStorV, double-click on the Start parameter and set its value to 0 (zero).
- In the adjacent registry key HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ iaStorAV \ StartOverride for the parameter named 0, set the value to zero.
- Under HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ storahci, set the Start parameter to 0 (zero).
- In the HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ storahci \ StartOverride subkey, set the parameter named 0 to zero.
- Close Registry Editor.
The next step is to restart your computer and enter UEFI or BIOS. At the same time, it is better to start Windows 10 after restarting in safe mode, and therefore I recommend that you enable safe mode in advance using WinR. msconfig on the “Boot” tab (How to enter safe mode in Windows 10).
If you have UEFI, I recommend in this case to do it through “Options” (WinI). “Update and Security”. “Recovery”. “Special boot options”. Then go to Troubleshoot. Advanced Options. UEFI Software Settings. For systems with BIOS. use the F2 key (usually on laptops) or Delete (on PC) to enter BIOS settings (How to enter BIOS and UEFI in Windows 10).
In the UEFI or BIOS, find in the SATA options the selection of the drive mode. Install it in AHCI, then save the settings and restart your computer.
Immediately after the reboot, the OS will start installing the SATA drivers, and upon completion you will be prompted to restart the computer. Do this: Windows 10 AHCI mode is turned on. If for some reason the method did not work, pay attention also to the first option described in the article How to enable AHCI in Windows 8 (8.1) and Windows 7.
Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram. Youtube, Yandex.Den)
Good day! The day before yesterday I asked you a question about why I bought a Plextor SSD, installed Windows 10 Pro, after that I can’t load any boot disks through BIOS.
asks only the disk from which Windows was installed. Reset BIOS to factory settings. Same song. When buying an SSD, the box says that there is some kind of 3D memory, how can I turn it off, if it’s because of it? Thank you!
Not because of her, 3d is how (physically) the memory cells on the SSD are organized, you won’t be able to turn it off. In general, I suppose you are still confusing something and somehow put the boot in the wrong way or prepare the bootable USB flash drive in the wrong way, or, for example, the secure boot was not disabled where it is required.
Hi, I have one SSD in my PC now. Initially displayed in controllers (2 standard IDEs). After I did everything, one changed to AHCI, the second remained IDE. As I understand it, this is a part of the disk (reserve xs) in the IDE, or what? and what to do?
Right now I saw one called “Standard SATA AHCI Controller”
Second “Standard Dual Channel PCI IDE Controller”
as I understand it, the second one does not apply to SSD at all?
Probably yes. Look in the properties of the disk itself under “disk devices”. information. path to the device instance. Doesn’t start with IDE?
Good day. I have such a dilemma, there is no AHCI mode in the BIOS, but. in the crystal disk info it shows (and in other programs for SSD) that TRIM is enabled. This is normal, because as far as I know TRIM only works in AHCI mode? or don’t know something?)
PS thanks in advance)
And you just don’t have a switch? Then maybe he already works in AHCI mode?
Plus, the TRIM function is also possible in the IDE. Yes, in my article on the topic there is a line that the disk is better in AHCI mode to work, but in reality this is not a mandatory requirement, the TRIM command can be transmitted in this case.
No, there is no switching. And yes ahci mode works, it shows in the program from the SSD manufacturer (Patriot). But this ahci mode is nowhere to be found, even in the device manager it shows ata storage. That is, it is absent, but the system still recognizes?!
PS What is this for me. And besides, according to this article, I wanted to turn it on (and items 1 and 2 in the registry are already included), if I turn on the last two items (3 and 4), can I get an error after rebooting.
According to the description, it looks like you don’t need to turn on-switch anything at all, you already have AHCI. Those. you don’t have AHCI, and you cannot enable IDE in the BIOS and there’s nothing to switch in the end (they just didn’t add this item)
Windows 10, the system was installed in IDE mode. Bios has AHCI-AUTO. In the device manager in the device description. Intel (R) 5 Series 4 Port SATA AHCI Controller (one), the path to the device instance is IDE \ DISKSamsung_SSD_860_EVO_250GB_RVT02B6Q \ 496122CD00.0.0
it turns out the disk does not work in AHCI mode. Why? How to fix it?
And look in the properties of the controller (not the disk itself). driver. information. What driver file is listed there? If storahci.inf then AHCI
In the properties of the controller: Information about the driver files C: \ Windows \ System 32 \ DRIVERS \ ia Stor.sys So AHCI is not enabled. My actions next.
No, this is also an AHCI driver, everything is in order, it turns out.
Dmitry! Thank you for your advice and help.!
It was AHCI that shone in the Device Manager, although Samsung Magician showed that it was disabled, the CrystalDisk test was also not happy with the result, IDE was enabled in the BIOS.
I did everything as per the instructions. It works! HURRAH! Thank you for the article!
The list of IDE ATA / ATAPI Controllers shows “Standard Dual Channel PCI IDE Controller”
And in the properties of the SCSI disk.
Who to believe?
There is a machine with WIN10, which, in principle, does not have AHCI (the chipset does not allow), I want to forward it to a machine that has AHCI. As I understand it, you have to act as you have written, that’s enough. Or are there any other points in this case?
Those. screw to another machine? It may not start, depending on the difference in hardware. Optimal. still reinstall.
Yes, I want to replace the am2 motherboard without ahci (asus m2n) with the one with ahci (foxconn a690). One junk after another, a little faster.
Probably it would be better to start the system on a new board in the same ide-mode, and then make a substitution on it, as you described.
No, it’s better to reinstall the system on new hardware. It’s always better than installing a disk with the system from an old computer on a new board.
But, if it’s more convenient for you, then try.
Yes, it’s not for me, it’s for relatives. I thought to keep what they had acquired. 🙂
Thanks for the resource and information.!
Good time! I got such a problem: the other day I installed a licensed Win 10 pro on the SSD. The system began to run clearly every other time. Those. once after turning on the power, the boot is normal, and the next time it just stops at the blue tiles, and no messages. And also, when you exit sleep mode, the PC always comes to life, but there is no further download, the monitor also does not turn on. It only helps to turn off the power or reset through the buttons on the case. In this case, the download also depends on whether it was performed during the previous power-on (reset). If it was, then you have to turn it on again with the power button or reset. All drivers and BIOS are up to date. Quick start jackdaw removed. AHCI works. All system and hardware tests, ideally. I did reinstall Win 10. Previously, this SSD was Win 7 and everything was fine. Its clone on the HDD from the same SATA cable works without problems. I already broke my head, what to do?
If you have a PC, go to the site of your motherboard model.
If the laptop. to the laptop website.
We are looking for chipset drivers, especially if Intel is Intel Management Engine Interface, install from the office. site (even if there for the previous version of the system).
For a laptop, there may be additional power management drivers from the manufacturer, all sorts of Power Management, or, for example, ATK Package for ASUS.
I have a PC. All drivers are the freshest from manufacturers’ websites. AMD processor and graphics card. OS is completely updated.
I sort of figured out with loading Windows once after turning on the power or reset. For some reason, there were two identical Windows Boot Manager in the boot order of the disks in the BIOS. One turned off and the PC started to boot normally when turned on. But! after waking up from sleep, everything remained the same as it was, i.e. ALWAYS, when exiting sleep mode, the PC comes to life, but there is no further download, the monitor does not turn on. It only helps to turn off the power or reset through the buttons on the case. In this case, the normal download still occurs the second time. Those. the first time it just stops after the blue tiles appear, but before the dots appear moving in a circle.
What else did I do but didn’t help:
I changed the connector and cable.
Changed AHCI driver from Microsoft to AMD.
Disabled in BIOS Advanced Mode (F7) Advanced Onboard Devices Configuration JMB Storage Controller = Disabled
I swapped the memory bars and launched them one at a time. Did not help.
There is an ASUS Prime Z-370P motherboard, a Samsung 850 EVO 250GB SSD and a 1TB WD Gold HDD. Just now I got to this article, in UEFI the disks were defaulted to “Intel RSP Optane Technology (RAID)”, but in the information the disk is indicated as SCSI (that is, AHCI), but in Disk Magician from Samsung ACHI is marked as Deactivated, although TRIM is active. When switching to UEFI to AHCI, a black screen crashes. SATA 3 (6 gigabit) mode.
How to Disable Built-In Webcams on Windows Computers. Device Manager Tutorial
Hello. About “find out if the AHCI mode is enabled” in the OS. I performed the necessary manipulations in the OS, enabled AHCI in the BIOS, and the SSD began to work clearly faster. However, in the device manager, I have both an IDE controller and a SATA controller active (previously there was only IDE). And the “instance path” starts for this SSD with IDE \. Disconnected the IDE controller, rebooted. nothing has changed. Maybe there are some other ways to check?
Take a look at what it shows from the SSD manufacturer’s program. https://remontka.pro/SSD-software/
Crucial Storage Executive writes to me “Driver Version: 6.1.7601.18231 (IDE Channel)” and “SATA Information: SATA Interface: SATA 3.0Gb / s (SATA 2)”. I also opened CrystalDiskInfo, the program shows the SATA interface and the SATA transfer mode. But on the screen a year ago, CrystalDiskInfo also showed SATA everywhere, although everything worked in the IDE. Therefore, I assume that the “SATA Interface” in Crucial Storage Executive is not associated with AHCI, but with a physical SATA connection.
Then a method like this:
In the device manager, go to the IDE ATA / ATAPI controllers and open the properties of the existing controller there.
On the “Details” tab, item “Service”. If we see StorAhci, then AHCI.
Hello. I do everything according to the instructions, but there is an endless reboot after the BIOS. 🙁
Hello. If an SSD is installed on my computer for the system, and a regular mechanical hard drive for computer games, software and files, should I set the AHCI mode for SSD in the BIOS, and leave the SATA operating mode for a regular hard drive? Or set the ACHI operating mode for both disks ?
For both AHCIs, put it boldly, there is no point in using the IDE anywhere today (well, except perhaps for some specific non-household tasks).
In 10 Windows, 3 disks 1ssd and 2xdd are installed, in the device manager it shows that the SSD is working in ide mode and one of the HDDs is in ahci mode. Ahci mode is set in gigabyte BIOS. The question is how to get an SSD to work in ahci mode?
And try to put the proprietary software from the SSD, what will he write about the operating mode? (it usually signals if the IDE).
Hello Windows 10 was installed in AHCI mode, everything was fine before the power outage. now Windows for some reason is loaded in ide mode, where to dig? Registry changes didn’t help
How did you determine what is now in the IDE? The BIOS also has an IDE?
Yes, it became ide in the BIOS and in the device manager. And when you change to achi. a blue screen appears when loading. Could all this be related to the battery on the motherboard?
In theory, yes.
Then, as an option, change the battery so that the settings are not reset in the future and then, according to the instructions on AHCI, change.
Recently I ran into a problem: the new SSD (Samsung 860 evo) spontaneously switches to SATA 1 mode. The controller on the motherboard supports mode 2, the screw in the system also works at 2m without interruption, but the SSD regularly falls out into the 1st. The proprietary Samsung magician utility reports that mode 2 is available, but does not offer any solutions, and also says that AHCI is turned off, although it is turned on in the BIOS, in the device manager, controllers and disks are all on AHCI. It helps to reset the BIOS settings to default, and even then not always.
What can cause this and how to deal with it?
Lenovo G50-30 80G0 laptop
After reboot blue screen, registry returns to IDE mode again.
.Reg file with default settings for Windows 10 services
This is not the best way (and potentially something can go wrong), since the set of services and their parameters differ from version to version of Windows 10 and depending on the edition of the system. Important: if you decide to use this method, create a Windows 10 restore point first.
But if you want and at your own risk, you can use the registry file with all default service settings (except for third-party services) for Windows 10 Pro 20H2. download this ZIP file. https://yadi.sk/d/cw1yhXAIU- Sq0A, unzip it, “run” the REG file and agree to add parameters to the Windows 10 registry, then restart your computer.
Be aware that when you add data to the registry, you will most likely receive the message “Unable to import, not all data was successfully written to the registry.” This is due to the fact that changing the settings of some services is prohibited in Windows 10 and changes for them will not be made.
System configuration is a method that can help, but does not restore the original configuration of all services
The most commonly recommended way to restore the startup of services is to use System Configuration. In fact, it does not restore the startup type of all services, but in some cases it can work and fix problems that have arisen due to service problems, so I recommend starting with it:
- Press the WinR keys on your keyboard (Win is the Windows logo key), type msconfig and press Enter.
- On the “General” tab, select “Normal startup” and click “Apply”.
- Reboot your computer.
After that check if the problem was resolved.
Please note: if you go to msconfig again after a reboot, you will most likely see that the checkbox is set again in the “Selective startup” state. this is normal and somehow it should not be fixed.
Restore points are the fastest method for restoring services
If you have restore points on your computer and you have restore points that were created at the time before the problems appeared, this will be the fastest way to restore the functionality of the services.
If Windows 10 starts and runs:
- Press the WinR keys on your keyboard, type rstrui.exe and press Enter. Use the suggested restore point or check “Choose another restore point”.
- Select a restore point for the date when the problem did not manifest itself.
- Start recovery and wait for it to complete.
- If you see a blue screen with the “Advanced options” button, you can go to them, and then use restore points in the advanced system recovery options.
- You can boot from a bootable Windows 10 flash drive, go to the second screen of the installer and click “System Restore” at the bottom left, then go to restore from a restore point.
Startup type of various Windows 10 services
The screenshots below show the default service startup types for Windows 10, only built-in system services are presented in the Professional edition of the system (in Home, some services may be absent).
How to enable services by default in Windows 10
If you run into problems after taking any steps to optimize Windows 10 services, you may need to restore the services settings to their default state. Depending on the situation, this can be done in different ways.
This tutorial details the different methods to restore default services in Windows 10 and additional information you might find useful.
Other methods to restore startup type and other service settings to default values
If any methods for restoring services do not resolve the problem, you can:
- Try to use the third-party utility Easy Service Optimizer (the interface language is switched to Options. Languages). If you select the Default tab and apply the settings, the startup type of services will be restored. But: not all services are presented in the program, but only the main ones. The official website of the program. https://www.sordum.org/8637/easy-service-optimizer-v1-2/
- The option to return services to the “default” state is present in the Windows Repair All In One utility, but I can not vouch for the program’s reputation. Open the “Repairs” section, and then mark the point for resetting services, as in the screenshot, click the Start Repairs button. Official website of the program: https://www.tweaking.com/content/page/windows_repair_all_in_one.html
- You can reset Windows 10 while saving data. The startup type of services and their other parameters will be restored.