How to enable WEB-camera via phone • BYRGPUB.COM

Remote activation of the computer via a mobile phone. How to turn on PC using android phone. How to turn on PC using android phone

What is the first thing you do when you get to your desktop? Turning on your computer and waiting for the OS to boot? This time can be from one to several minutes.

Whether you are pressing your keyboard, moving your mouse, or pressing the power button, you must be in front of your computer before starting it, while wasting your precious time. It would be nice if your computer was ready to go for the way you approach it?

Let me show you how to use your Android device to turn on your PC remotely. Tomorrow you can get to your desk with Windows already loaded.

Before you start

For this setting to work, your computer must support Wake-on-LAN (WoL). Wol. this is a feature of the motherboard. The easiest way to find out if your computer supports WoL. boot into BIOS and check power management settings. Click on the correct key at boot (try ESC, DEL, F2 or F8) and your computer should enter BIOS.

Once in BIOS, find the Wake On LAN option and enable it. You will likely find it alongside other power management or network related settings. BIOS settings vary from computer to computer, so you may have to search for it yourself.

If you cannot find the Wake on LAN option, the following setting will probably NOT work.

Fast and easy setup

If your PC supports WoL, then the first step is to install Wake On Lan, this is a free Android app.

Then you have to connect your Android device to Windows computer using the app.

When you first open the app, it looks pretty grim. Click the “” icon in the lower right corner and follow the onscreen instructions to add your first device.

After you follow the instructions of the app, it will search for devices connected to your local network. If many computers, phones, and tablets use an Internet connection, this list can be misleading. The easiest way to identify your target computer. via its MAC addresses.

To find the MAC address of your computer, go to your computer, press the Windows R key, type CMD and press Enter. Then enter ipconfig / all at the command prompt and press Enter. This command will show the physical address of your computer, a six-two-digit number, also known as MAC addresses.

Now go back to the app and select the entry with the corresponding MAC address. Select an alias for the device and select the appropriate Wi-Fi network.

Once you’ve added your computer to the app, it’s time to see if it works! Put the computer into sleep or hibernation mode (Start Power Hibernate) and press the wake button in the Wake On Lan app.

If it works, great! If not, you have two more settings to check.

Hard setting

So you enabled WoL in BIOS and configured the application as described above and it still did NOT wake up your computer? Try the following settings.

Enable WoL for network adapter

You probably have NOT configured the network adapter to receive the Wake-On-LAN packet.

In Windows 10 Right-click the Start button and select Device Manager. Go to network adapters, right click on the one you are using to connect to the internet and select “Properties”.

On the Power Management tab, you will find three checkboxes, including “Allow this device to wake the computer from standby” and “Allow the computer to wake up from standby only with a magic package.” If they are NOT pressed yet, do so. This should fix any issues that are causing the Android app to malfunction.

Disable Fast Startup

The wol function only works when you are trying to wake up your computer from sleep or hibernation. Wol does not work with default hybrid shutdown in Windows 8 and Windows 10. Simple solution. disable fast startup.

Open Control Panel, find “Power Options” and select “Change what the power buttons do”. At the top, click the Change Settings button that are currently unavailable, then scroll down and Uncheck the box next to Enable Fast Startup (Recommended). Finally, click on “Save Changes”.

Now put your computer to sleep (Start Power Sleep) and try again.

If you did everything correctly, the computer should turn on?

Windows wake up

Once you have installed the Wake On Lan app, you can start your computer by pressing a button.

Unfortunately, this application will NOT allow you to automatically wake up your computer; for example, waking up your computer on a schedule or as your phone connects to your Wi-Fi network. In the latter case, try PCAutoWaker, although note that the app has NOT been updated since 2011.

How to turn on the computer from the phone using Wake-On-Lan / Notes of the System Administrator

Good day, dear friends, acquaintances, readers, admirers and other personalities.

I think that many of you have often thought about various, say, alternative ways to turn on your computer. In particular, we wrote about enabling it from the keyboard, that is, without the participation of the power button on the case.

By the way, most likely many people know about such a thing turning on the computer on a schedule or through the Wake-On-Lan function (that is, over the network with the introduction of a “magic” packet). As part of this article, we will combine business with pleasure and learn how to turn on a computer from an Android phone, Using Wi-Fi to get started.

Wake-On-Lan and Android: turn on the computer from the phone

In simple terms, the Wake-On-Lan (W-O-L) function leads to a constant supply of power to the network adapter, which looks at all incoming packets and if there is a “magic” one among them, it turns on the computer. details can be found in Wikipedia, and in various applications of this functionality we will talk sometime separately.

Actually, you will need a motherboard with support for the above function, a phone or tablet, in this case, with Android (although Apple has applications of this kind and many other places) and, for example, the Wake-On-Lan application of the same name (or its analog).

First of all, you need to enable W-O-L in the BIOS (you can usually get there using the DEL key).

Usually the function is called that, that is, Wake-On-Lan, but it can have a name, say, Power On By PME Device (or PCI PME Device) as in the screenshot above. This is due to the fact that in addition to “traditional” network cards and internal modems, the ability to wake up a computer may have, for example, an internal TV tuner.

You can take the above program, for example, at this link. Installing traditional for all Android applications.

The use is extremely simple. If you are on your Wi-Fi network, and the computer is connected to the router, say, with a cable, then just start the program and press the button “”.

In the next step, you will be prompted to enter the address manually or to “pull” the interface, slide your finger across the screen. We’ll talk about manually specifying an address and turning on a computer from a phone from anywhere in the world, but for now, just use automatic search.

Then it remains to select the desired device (computer or laptop) from the list by the IP address (you can find out the address in the properties of the network connection on the computer), as well as assign it some “Color Name” (aka “Nick”).

Well. Done. It remains to turn off the computer and the phone will name the device (in my case, i.e. in the screenshot above, this is the IP address in the local network, i.e. 192.168.1.2).

Remotely turning on a computer from an Android smartphone

Did you know that now there is an application that allows you to turn on your computer remotely via the Internet from anywhere in the world? You can download it from the link PC WakeUp (and PC WakeUp PRO) Do you have a situation when you urgently need to access your computer? For example, the PC contains some files or Photos that are needed at the moment. With this application, you will learn how to remotely turn on a computer via the Internet and then use it using the remote computer control program. To use remote turning on of a computer via the Internet, you need to know how to configure it.

What do you need:

The following describes in detail how to set up your computer, router and smartphone in order for all this to work.

Computer settings

The computer needs to be restarted and go into the BIOS (usually, for this it is enough to press F2 or DEL when the first lines appear on the screen).

In the POWER tab (or something like that), enable the Wake-on-LAN function (remote power on) for S4 mode (very low power mode, sleep).

Save everything, hit F10 and Reboot to Windows.

Open the “Device Manager” (for example, enter this combination in the search after clicking the “Start” button)

In the manager, you need to select a network card among network adapters and go to properties. (It will contain the words “Ethernet” or “LAN” not to be confused with a Wi-Fi adapter, it usually contains the words “Wireless” or “WLAN”)

In the properties on the “Advanced” tab, check for the presence of the Wake on Lan (WOL, Wake on Magic Packet) item and if it is, then enable it.

Computer setup is complete, it is advisable to restart the PC again. To enable remote activation via WOL. you need to turn it off through hibernation, and not through shutdown.

Setting up a router

We will configure the router using the example of Asus RT-N66U, however, the settings in routers are not very different and most likely you can configure others.

You need to configure a remote connection to the router:

A) If you have a static external IP then you can skip this item. Setting up DDNS. To do this, go to the Internet settings. DDNS and enable dynamic DNS service. For example, noip.com. You need to create addresses where your router will be accessible from the outside and enter data about this in the router:

B) configure SSH access to the router. In my router, it will be enough to put down the following settings on the “Administration” tab. “System” (for DD-WRT firmware, the manual is here, but access will be available only if the user is logged in. “Root”, these are firmware restrictions)

Application setup

Everything is simple in the application. Go to the settings and register:

DDNS address (or external static IP)

Connection type

You can find out the MAC addresses of your computer’s network card like this: Network and Sharing Center. Changing adapter parameters (or “Network Connections”), and then as in the screenshot:

Using the app

If everything is configured correctly and all equipment supports this functionality, then after starting PC WakeUp (or PC WakeUp PRO) on your smartphone, you will see a green lit light next to the inscription “Router status” (there is a signal to the router). After that, you need to press “SSH to the router” and as soon as the button turns green, the button for remote computer start-up will light up. After pressing it, your computer will turn on. Further, the easiest and most convenient way is to use TeamViewer (download on PC and smartphone) to control your computer remotely.

How to remotely turn on a computer from an Android smartphone

How to remotely turn on a computer from an Android smartphone. Did you know that now there is an application that allows you to turn on your computer remotely via the Internet from anywhere in the world? You can download it using the link PC WakeUp Have you ever faced a situation when you urgently need to get access to your computer? For example, the PC contains some files or Photos that are needed at the moment. With this application, you will learn how to remotely turn on a computer via the Internet and then use it using the remote computer control program. To use remote turning on of a computer via the Internet, you need to know how to configure it.

What do you need:

The following describes in detail how to set up your computer, router and smartphone in order for all this to work.

Computer settings

The computer needs to be restarted and go into the BIOS (usually, for this it is enough to press F2 or DEL when the first lines appear on the screen).

In the POWER tab (or something like that), enable the Wake-on-LAN function (remote power on) for S4 mode (very low power mode, sleep).

Save everything, hit F10 and Reboot to Windows.

Open the “Device Manager” (for example, enter this combination in the search after clicking the “Start” button)

In the properties on the “Advanced” tab, check for the presence of the Wake on Lan (WOL, Wake on Magic Packet) item and if it is, then enable it.

We believe that most users are well aware that it is possible to work on a computer remotely, controls its functions using special programs like TeamViewer. Such control usually means launching programs, working with the file system, data, and the like, and even remotely, the computer can be turned off and rebooted. However, few people know that in remote mode, the computer can also be turned on. Only how is it possible, you ask, because for this access to the operating system must be open?!

Not at all necessary. Many PCs have a feature called Wake-On-Lan that keeps the network adapter powered at all times, so it can pick up packets even when the operating system is idle. While in standby mode, the computer scans the packets entering its Mac address and if it detects a magic packet among them. literally a magic package, the same gives a signal to turn on and load the operating system.

So, what do we need to turn on the computer this “magic way”? First, a motherboard with Wake-On-Lan support and an ATX power supply, secondly. smartphone running Android with the program of the same name installed on it. Of course, both PC and smartphone must be connected to the Internet. As for the Wake-On-Lan function, it is located in the BIOS, in the Power or Power Management Setup section. All you need to do is find it and set it to Enabled, that is, on.

Note: In some BIOS versions, including modern UEFI, the Wake-On-Lan function may have a different name, for example, Power On By PME Device.

Next, you will need to install the application on your phone and configure it. We will NOT go into details about the settings, we will only say that you will need to specify the IP and MAC addresses of your PC. It will be possible to turn on the computer remotely both in the local and in the global network, however, in the second case, most likely, you will have to tinker with additional settings, since here certain difficulties may arise with identifying the device on the Internet.

Android application: play.Google.com/store/apps/details?Id=co.Uk.Mrwebb.Wakeonlanhl=ru

Cxema.Org. Remote control via cell phone

Remote control via cell phone

Often there is a need for remote control of a remote object, for example, control of heating, alarm system of a country house, etc. Traditional management methods will not help here. In this case, cellular communication will come to the rescue. But just taking a cell phone will not help the case, a DTMF code decoder is required, which when you press one or another digit on cell phones will switch one or another channel on the decoder. It is this decoder that is presented to your attention.

Basic decoder parameters:

Has 10 independent control channels;
Password access;
Saving state when power off;
Sound confirmation of events;
Automatic recording of outputs status, if enabled;
Automatic device blocking if password access is enabled.

The decoder circuit is quite simple and does NOT need setup. All functionality is implemented on the PIC16F883 microcontroller.

A specialized microcircuit of the MT8870 brand is used as a DTMF signal decoder. At the output, buffer stages are installed on the ULN2003, which makes it possible to inconsistently connect the relay coils.

I assembled a trial version of the device on a breadboard

The scheme provides for the installation of three jumpers, their purpose:

S1. Enabling saving state of outputs;
S2. Password reset;
S3. Enabling password access.

The algorithm of the device is very simple:

We call the phone and by pressing the buttons on the phone we control the device. If the S3 jumper is installed, the password must be entered before switching the status of the outputs (by default 0000). Further, to turn on the desired channel, press the channel number and number 1. To turn it off. the number of the selected channel and the number 0. For example, turn on and off channel number 5. Press 51, and then 50 If you want to turn on all the channels together, press the two asterisks. To turn off all channels together. two hash lines (##).

To change the code, enter the following combination: ## followed by four digits of the new code. If you have forgotten the entered code, it is easy to reset it to the standard 0000 by setting the S2 jumper for a short time.

As a rule, in country houses there are frequent cases of power outages, as well as short-term outages are possible during strong winds. To save the state of the outputs, it is possible to write the state to the non-volatile memory of the microcontroller and restore this state when the power supply is restored. This is done by jumper S1.

Pay special attention to the pinout of the connector for connecting the device to a cell phone. Different manufacturers solder this connector in different ways! If the device does NOT respond, swap the leads, or look for a wiring specifically for your phone. The auto-raising function is available in almost any phone!

10 apps to control your computer from your Android phone

Microsoft allows users to access a Windows 10 computer over the phone. Remote connection to office PC. an excellent opportunity at any time and from any place not only to connect to a work computer, but also to do whatever you want with it remotely. And do not get out of bed while driving a car or in a tent on the river bank.

There are several programs for Android with which you can control your computer using your smartphone via WI-FI, Bluetooth or any available internet connection. In this review, we have collected the best of them!

PC Remote

PC Remote has many useful features. In addition to the usual keyboard and mouse, you can work with Powerpoint and Excel, control the camera and music. The application uses Windows Remote Desktop to transfer the contents of the system screen to the display of your smartphone. than 25 console games are integrated into PC Remote, which can be played using the touchpad. Supports different types of game consoles.

Teamviewer

Teamviewer is arguably the most popular and reliable program to work with. There is also a desktop version with which you can get access from one computer to another. Differs in rich functionality. It is very easy to copy files from the gadget to the PC and vice versa. To connect your smartphone to the desktop using TeamViewer, use your existing user ID and password.

Setting up is extremely simple, even a person who is poorly versed in computer technologies can easily cope with all stages of installing and running the application. The download link is located at the top of the TeamViewer Official Page.

After the application is installed and launched, a window appears with a user ID and password to enter THESE data in the application on Android. The user controlling the computer transmits the identifier, and then the password to the person who wants to get remote access to the PC.

After a couple of seconds, a virtual bridge will be created and the desktop interface will be displayed on the smartphone display. At this stage, you can move the cursor around the screen, select and open files, in a word, completely control the computer on the other end.

Microsoft Remote Desktop

How could we forget the good old Microsoft Remote Desktop? At least Windows 10 users will clearly not have compatibility problems, since the application is from the same company as the operating system.

Despite the fact that it is not necessary to install a client-server on a computer, you still need to perform some simple manipulations. Windows 7 and 8 go to Control Panel, select the System and Security category, then. “System”. Here, in the panel on the left, click on the term “Remote Access Settings”.

How to connect a WEB-camera by phone? Several easy ways

In this article, you will learn about the new features of the phone, namely using it instead of a webcam.

You will be offered several options with which you can connect your webcam by phone.

How to use a smartphone instead of a webcam

Smartphone. it is a multifunctional device with the help of which various tasks are solved.

However, not many people know about the possibility of using a mobile gadget as a webcam, as well as how useful this function is.

In fact, there are situations in life: you need to urgently answer a video call, and the webcam, as luck would have it, is faulty.

In this case, the camera of your gadget will come to the rescue. By following the step by step instructions, you will be able to use your gadget to transfer video to Skype and other video chats.

If you need:

Make a video call via Skype, and the standard camera is missing or faulty;
Use multiple cameras to broadcast on the Internet;
Create remote video surveillance.

Even if the screen is broken on your gadget, but it is still working properly, you can easily replace the webcam, the main thing is that the front or main camera module remains working.

To connect you need:

USB cable;
Special utilities for pairing a gadget with a PC or laptop;
Wi-Fi hotspot.

Programs to turn your phone into a webcam via USB

Almost any gadget can come to replace the webcam, provided that a special program is correctly installed on it.

As a result, a phone with installed utilities will turn out to be an excellent device, which can be used to communicate with family or business partners via video communication, and you can also broadcast video with it.

The work of applications designed to turn the phone into a webcam, based on the synchronization of the gadget with a personal computer via a connection via a USB cable or Bluetooth.

These utilities will allow you to replace the camera built into the phone instead of the usual webcam installed on a laptop or computer.

The image quality will depend on the installed program and the resolution of the mobile camera.

With DroidCam, AlterCam and USB Webcam programs, you can connect your phone as a webcam via USB.

Using one of THESE applications allows you to transfer images from the camera of the gadget to a PC or laptop via Bluetooth or USB cable and can be used using web services for instant messaging.

In addition to the camera, you can also use the microphone of your mobile phone to communicate on Skype.

Webcam applications

Droidcam

One of the best software for smartphones that runs on Android. With its help, the gadget will perform metamorphoses in a matter of minutes and become an excellent portable webcam.

Step-by-step installation instructions:

In order for the phone to turn into a camera, you need to install Android utilities.

While it is being installed, start installing the program on your desktop computer. Let’s unpack the archive. To do this, click on the “Extract” button on the archive file. and select the location where you plan to extract the contents of the archive, then click the “Ok” button.

After the unpacking process is complete, go to the folder you chose to unpack and run the setup file and follow the instructions that appear on the screen.

Installing DroidCam on a Smartphone

Now you need to connect your phone to PC using USB cable or Bluetooth.

After successfully connecting one of your gadgets to another, run the program on both devices.

In the active window, you need to enter the IP address of the mobile gadget, which allows you to distinguish the device from all the others.

You can find this path in the DroidCam application running on your phone. In addition to the IP address, DroidCam also shows the port number.

The window where you need to enter IP addresses

A notification will be sent to the computer desktop that the phone has been detected. You need to select a video quality to get started.

To continue working and start streaming, you just need to press the “Start” button. The application will send the image from the gadget’s camera to the PC. If a mobile device with two cameras, go to the application settings on the phone and check if the Corresponding checkbox is selected, which is responsible for the active camera.

Altercam

You can also connect your phone to a computer as a webcam via a USB cable using the AlterCam program.

This program allows you to install a virtual webcam on the system.

It can be used to broadcast any kind of camera, as well as just video clips stored on the computer.

We will consider the option when the video source is a mobile device camera.

The AlterCam program connects to a mobile camera via the IP protocol and broadcasts live video from it to a virtual webcam.

The process of turning your phone into a webcam may seem daunting, but adjusting is straightforward.

Step-by-step instruction:

First, download the AlterCam application and install it on your PC. After the installation is complete, the program will start automatically.

After that, you need to install the IP Webcam application on your smartphone. You can find it in the Play Store.

IP Webcam App

The installed application must be launched on the phone. At startup, a list of settings will appear, as a rule, you do not have to change them, you just need to go down to the very bottom and select the “Run” item.

You need to run the program on your computer as well. In the “Camera” window, select “Add an IP camera”.

Now you need to connect to the camera of the mobile device using the AlterCam program. In the term “IP-camera name” that will appear when you open the “Add IP-camera” window, enter any value, for example, my phone.

The image quality of the IP camera will depend on the resolution settings in the smartphone app. If you do not know the exact value, leave this parameter unchanged.

6 At the bottom of the application opened on the phone, the IP addresses of the camera are indicated, we transfer it to the line “IP camera address” in the window open on the computer.

After that you need to add “/ live” or “/ video” at the end of the address. The first option is for devices running on the iOS operating system, the second. for android.

Adding an IP camera

Transfer the IP addresses to your computer, you can click the “OK” button. If all the actions were performed correctly, the image from the phone camera will appear in the AlterCam program. If this did not happen, check the correctness of all steps in stages.

After the image appears in the AlterCam program, you need to select the virtual camera in the settings of the voice program that you will use. Consider an example, Skype.

Log in to skype using your username and password. At the top, click on the “Tools” tab and select the “Options” section. In the general settings you will see the submenu “Video settings”, in it and select the program.

USB Webcam

The program allows you to use your phone as a webcam via a USB cable. First you need to install the application on your phone and PC.

If the program is installed correctly, then the image in all programs that use the camera will be broadcast from the phone camera. True, the frame rate will be low.

You can reduce the video stream resolution in the application settings using the hardware key.

After starting the program on a smartphone, you need to enable USB debugging to activate the webcam via a personal computer.

You can find this option in the “Options” menu, where you need to go to the “System” submenu, and then to “Developer options”.

After enabling USB debugging, connect your phone to PC via data cable. Run the program on your computer, to get started you need to press any key.

The USB Webcam application must also be running on the phone. Now log into your Skype account, go to the “Tools” section, then the subsection “Settings”.

In the settings, open the “Video settings” section, in the window that opens, select “GWebcamVideo”. If everything works correctly, a picture from the smartphone camera will appear on the monitor screen.

If you see a green screen, your device is not supported by USB Webcam.

Wi-Fi connection

To replace the webcam with a mobile phone via Wi-Fi connection, use the DroidCam Wireless Webcam program.

To do this, you need to install the application on your smartphone and download the program to your computer.

After installing programs on devices, you will need to go through the following steps:

Turn on Wi-Fi on your phone;
Launches the mobile application;
Open the program on your computer and select a Wi-Fi connection in the window that opens;
Enter the number in the Device IP term. You can find it in the mobile application in the “WI-FI IP” item;
Check the boxes next to the Audio and Video labels if they are not set automatically;
Click the “Srart” button.

Choosing a wi-fi connection

After completing all the above steps, the application will intercept the video signal from the smartphone camera and display it on the computer screen.

The free version only allows you to connect a mobile device and a computer with each other, while it contains ads.

In the paid version, there are no advertising banners and it is possible to adjust the desired contrast, brightness and change the image resolution.

Making a webcam from an iPhone

In applications that allow converting an iPhone or iPad into a video camera, there are many more options in accordance with conventional cameras.

over, they allow you to get a picture with a very good extension. You can use both cameras: both the main one and the front one.

You can use one of the following programs to connect your iPhone to your computer: Cam, Broadcaster, Mini WebCam 1.0.2, Wi-FiCam, Mobiola Webcamera, or EpocCam 1.9.1.

These utilities work almost on the same principle and imply the following actions:

Installation of computer software on a PC;
Installing the application on the phone;
Connecting phone and PC via wi-fi or USB cable;
Entering all the necessary settings;
Connect to selected messenger and use iPhone instead of webcam.

Using in Skype

The camera of the gadget can be used to communicate in video chat, Skype or applications that use video.

Selecting a smartphone camera in Skype is quite simple, for this you need to go to the video settings and select the camera of your smartphone from the list. If there are several of them, just select the one that will provide the best picture when viewed.

Skype camera setup

For convenience, the mobile device can be fixed on a horizontal or vertical surface, for example, a car holder or a stable phone stand.

How to make a webcam from Android smartphones via USB or WI-FI. CONFIGURATION. How to make a webcam from Android smartphones via USB or WI-FI. SETUP

How to connect a WEB-camera by phone? Several easy ways