Table of Contents

Enabling TouchPad in Windows 10

enable, windows

Touchpad. a very useful device, quite compact and easy to use. But sometimes laptop users may encounter such a problem as the disabled touchpad. The reasons for this problem can be different. maybe the device is just disabled or the problem is with the drivers.

Turning on TouchPad on a Windows 10 laptop

The reason for the inoperability of the touchpad may lie in problems with drivers, penetration of malware into the system, or incorrect device configuration. The touchpad can also be accidentally disabled by a keyboard shortcut. All the ways to fix this problem will be described below.

Using keyboard shortcuts

The reason for the inoperability of the touchpad may be the user’s carelessness. Perhaps you accidentally turned off the touchpad, pressed a special key combination.

  • For Asus, this is usually FnF9 or FnF7.
  • For Lenovo. FnF8 or FnF5.
  • On HP laptops, this can be a separate button or a double tap in the left corner of the touchpad.
  • For Acer there is a combination of FnF7.
  • For Dell Use FnF5.
  • At Sony try FnF1.
  • At Toshiba. FnF5.
  • For Samsung, they also use the combination FnF5.

Remember that different models may have different combinations.

TouchPad setup

The touchpad settings may have been configured so that connecting a mouse disconnects the device.

  • Hold WinS and enter “Control Panel”.
  • Select the desired result from the list.

Under “Devices and Printer” find “Mouse”.

  • Go to the “ELAN” or “ClicPad” tab (the name depends on your device). The section may also be called “Device Settings”.
  • We activate the device and Disable the deactivation of the touchpad when the mouse is connected.
  • If you want to customize the touchpad for yourself, then go to “Options.”.

    Often laptop manufacturers make special programs for touchpads. Therefore, it is better to configure the device using such software. For example, ASUS has Smart Gesture.

    • Find and launch ASUS Smart Gesture on the Taskbar.
    • Go to “Mouse Detection” and uncheck the box next to “Disable Touch.”.
  • Apply parameters.
  • Similar actions will need to be performed on a laptop of any other manufacturer, using the pre-installed client to configure the touchpad.

    Enabling TouchPad in BIOS

    If the previous methods did not help, then it is worth checking the BIOS settings. The touchpad may be disabled there.

    • Enter BIOS. Different laptops of different manufacturers may have different combinations or even separate buttons for THESE purposes.
    • Go to the “Advanced” tab.
    • Find “Internal Pointing Device”. The path may also differ and depends on the BIOS version. If “Disabled” stands next to it, then you need to enable it. Use keys to change the value to “Enabled”.
  • Save and exit by selecting the appropriate item in the BIOS menu.
  • Reinstalling drivers

    Reinstalling drivers often fixes the problem.

      Hold WinX and open the “Device Manager”.

  • Expand the item “Mice and other pointing devices” and right-click on the desired equipment.
  • Find “Delete” in the list.
  • In the top bar, open Action. “Update configuration.”.

    You can also just update your drivers. This can be done using standard tools, manually or using special software.

    The touchpad is quite easy to enable with a dedicated keyboard shortcut. If it is not configured correctly or the drivers stop working correctly, you can always solve the problem using standard Windows 10 tools. If none of the methods helped, it is worth checking the laptop for virus software. It is also possible that the touchpad itself is physically out of order. In this case, you need to take the laptop for repair.

    How to turn on Wi-Fi in Windows 10 if there is no Wi-Fi button?

    In this issue we will try to figure out how to enable Wi-Fi in Windows 10 if there is no Wi-Fi button. Where to look for the wireless network settings to turn on Wi-Fi and why there is such a problem. I’ll tell you about the error “Could not find wireless devices on this computer” in Windows 10.

    I must say right away that when you cannot find “Wi-Fi” on your laptop (there are power buttons, there is an item in the settings, etc.), then most likely that you simply do not have a driver for Wi-Fi installed, in you have a Wi-Fi receiver, or it is turned off.

    Let’s figure it out in detail.

    So the crux of the problem:

    The whole problem is that we cannot connect to a Wi-Fi network on Windows 10. I already wrote a detailed article on connecting to Wi-Fi. But, when we open the connection management window, then there simply are buttons for controlling the Wi-Fi adapter.

    If we go to the settings, to the network parameters, then there is no way to find the “Wi-Fi” item. And on the “Airplane mode” tab, we will see the highlighted error “Could not find wireless devices on this computer”.

    Such a problem may mean that:

    • Your computer just physically has a Wi-Fi receiver. If you have a laptop, it must have a built-in wireless adapter. On a computer, you can use an external Wi-Fi receiver. If you are sure that your computer has Wi-Fi (you used it before to install Windows 10, looked at the specifications, connected an external receiver, etc.), then you need to check other reasons.
    • The driver is not installed on the Wi-Fi adapter. In some article I already wrote that Windows 10 itself installs the driver on wireless adapters. But not always. And not always, these drivers work as they should. Therefore, the most common reason for such problems with Wi-Fi in Windows 10. is the lack of a wireless adapter driver, or an unsuitable driver.
    • Well, it may be that the “Wireless Network” adapter is simply disabled.

    One small nuance. If you have an “airplane” icon on the notification bar instead of the Internet icon, then just Turn off this mode by clicking on one icon and turning off the “Airplane” mode.

    Let’s check and fix.

    There is Wi-Fi on a laptop with Windows 10: solution to the problem

    Let’s first check if the “Wireless Network” adapter is enabled, and if you don’t have this adapter at all, then Make sure that the problem is in the driver, or in the absence of this adapter in your computer.

    Right-click on the internet connection icon in the notification bar, and open the Network and Sharing Center. In the new window, select Change adapter settings.

    If you see a “Wireless Network” adapter (or something like that) there, and it is disabled, then right-click on it and select Enable. After that, Wi-Fi should appear on your laptop, and you can connect to the wireless network.

    If there is a “Wireless Network” adapter at all, then, as I said, the Wi-Fi driver is most likely not installed on your computer. Or it is installed but does NOT work stably.

    Problems with the Wi-Fi adapter driver in Windows 10

    We need to go to the device manager and see what’s there. Is there a wireless adapter and how does it work. To do this, click on the Start menu and select Settings.

    Next, select Devices.

    At the bottom of the page, go to Device Manager.

    In Device Manager, click the Network Adapters tab. There may be several adapters, but there are two main ones. These are: LAN. to connect the Internet via a network cable to a network card, and a wireless adapter. Typically, a wireless adapter has the word “Wireless” in its name. This is how the Wi-Fi adapter looks in the device manager on my laptop:

    As you can see, the name indicates the manufacturer and model. If you have an adapter in the device manager, and it is turned on, but it does not turn on Wi-Fi, then try to update the driver for your adapter.

    If there is a driver, or there is no adapter itself, then you will not see it in the device manager.

    But, please note that if there is an adapter in the manager (and there is one in the computer), then there should be at least one “Unknown device” in the device manager, as I have in the screenshot. In this case, you need to try installing the driver on the Wireless adapter.

    How to install or update the Wi-Fi adapter driver?

    If you have a laptop, then go to the official website of the manufacturer, through the search, or through the menu, look for your model, find the section with driver downloads there, and look for the driver for the Wireless adapter. Please note that there will most likely be an option to select an operating system. Select Windows 10. If there are drivers for the “dozen”, then you can try to select Windows 8 (8.1). Also, the driver can be on a disk, which usually comes with a laptop (but it is unlikely that there will be a driver for “dozens”).

    Save the driver to your computer and just run the installation. If you downloaded the archive, then the archive should contain an installation file, which you just need to run and follow the instructions. After installation, restart your laptop, and try to connect to a Wi-Fi network (Wi-Fi must be on).

    If you have a stationary computer with a USB / PCI adapter, then look for the driver on the website of the adapter manufacturer. By adapter model. Well, you should also have a driver disk.

    As for updating the driver, we do everything in the same way as in the case of the installation: we find, download to the computer, and Install.

    How to enable page navigation gestures in Windows 10

    MacBook users are well aware that macOS has a fairly convenient two-finger swipe gesture that allows you to quickly return to the previous open page in the browser, or go to the next. However, not all owners of Windows 10 laptops know that this system has the same functionality, because its customization in the best traditions of Microsoft is hidden deep enough.

    READ  Computer Can't See Webcam

    In order to take advantage of this opportunity, first make sure that you have Windows 10 version 1709 or higher. otherwise, you need to update it. After that, open the Device Settings Touchpad, and find the item “Advanced gesture settings”:

    Open it and select any convenient gesture, and then in the drop-down list find “Move forward” or “Move backward”:

    That’s all, now you can work much faster with the browser and not only: gestures work in many programs that have a back or forward button. for example, in the same explorer.

    The difference, however, still remains in the classic “because its setting in the best traditions of Microsoft is buried deep enough.” It’s like disconnecting external drives: rather, people are completely overdone using all sorts of “flash drives”, than Microsoft will add their disconnection somewhere closer to the user. And so yes. you also need to turn off the USB flash drive in Mass.

    P.S. A long time ago, in a distant version of the iGuides application, when responding, the entire comment was visible, and not just its first lines. Those were good times. ))

    The difference, however, still remains in the classic “because its setting in the best traditions of Microsoft is buried deep enough”.

    How Microsoft will add their disconnection somewhere closer to the user

    As the system was a spit, it remained.

    Remove “safe extraction”

    At least move closer to the user

    So, it turns out that safe extraction is still needed?

    And instead of answering the question “why not move it closer to the user”

    Wouldn’t it be easier to be able to turn off the external drive directly in the explorer?

    A real indicator of Microsoft’s attitude to its products

    The problem is that Apple, which loves to boast of its user-friendly axis, ended up in two broken troughs at once: on the one hand, Mac has long ceased to be intuitive. 4-5 layers in the settings are no longer a rarity, and even such simple actions as working with autoload are hidden for some reason in the account settings. With iOS, by the way, it’s even worse: I found the parameters already in the sixth. Layer.

    On the other hand, the company that cut support for macbooks to just 7 years, throwing 15 “MacBooks of 2011 with Core i7 into the cold, could not properly optimize the system for the remaining 2.5 models. Opengl does not work normally. Vulkan missed it. own Metal, which turns out to be worse in the bottom line.Devices that are positioned for work are equipped with either integrated graphics from Intel, or a video card from AMD, WHICH DO NOT support CUDA, which has already become the standard for high-performance graphics area.

    Even okay, figs with him, it’s already a no brainer that Mac has long ceased to be a full-fledged working tool for 95% of its owners. Why can’t a normal GUI be made? Why does integrated graphics on Windows 10 bring the interface in 4K ideally without a single lag, and at the same time we get animation lags in 2K on MacBooks with it? Where are the normal power settings on a Mac? Why has NTFS been supported only for reading for ten years now, but for writing you need to install a driver for a thousand rubles? Why MacOS is put on SSD for half an hour when Windows does it in 3-4 minutes? Why is there no choice of font anti-aliasing? Why is a company that calls Mac touchpads the best rather than adding custom gesture settings to them? Why do the processors of the world’s best laptops heat up to 95-100 degrees during normal work tasks? Why is the opening of banal programs such as browsers or players often accompanied by a couple of seconds of jumping the icon in the dock, is this not some Adobe premiere? And that’s why. overdofig, and against their background, a minute solution of the problem every six months after a Windows update seems to be a mere trifle.

    How to enable widgets in windows 10. Windows 10 desktop widgets

    Hello dear friends, perhaps every Windows 10 user would like to embellish their desktop with different clock widgets, weather, processes, etc. So I decided to post an article that will tell you how to install widgets on your Windows 10 desktop.

    By default, gadgets are NOT built-in in Windows 10, Microsoft explained this by the fact that gadgets pose some kind of threat to the security of your computer and in order to protect users’ computers, they decided to abandon standard gadgets. But those who are used to seeing them in Windows 7 want to use them in new operating systems.

    As you remember, widgets work in such a way that after your computer boots up, an interesting clock, calendar and other processes are displayed on the desktop.

    Installing gadgets for Windows 10 is not a complicated procedure, every user can complete the installation

    Installation instructions

    The first step is to download the software for installation Follow this link

    After the installation file has been downloaded, launch the installation and in the welcome window, click “Install”

    The installation process begins

    Then complete the installation clicked “Finish”

    Immediately after the installation is complete, widgets will appear in the right corner, you can move them anywhere on your desktop

    If you want to add a gadget to your desktop, click “Add Gadget.”

    A window with available widgets will appear in front of you, you can select any gadget you like and add it to your desktop by right-clicking on it and selecting “Add”

    It will also be displayed on your right toolbar, respectively, drag it to a convenient place for us

    So, when you add all the necessary widgets to the desktop, you can hide the toolbar by right-clicking on the field with gadgets and selecting “Close 7 Sidebar”

    If you have a desire to add a new gadget, right-click on the desktop and go to the “Gadgets” item, then just add the gadget as shown above

    If you still have questions, write me in the comments and DO NOT forget to subscribe to the newsletter, thank you all and good luck.

    A new type of fraud Silent calls: what is the danger of the silent

    In 2005, Intel released the first 2-core CPU for personal computers. The Intel Pentium D laid the foundation for multi-core computing for home programs and applications. Modern CPUs have a large number of cores and computational threads, compared to the distant 2005. For example, Intel Core i7-8700 has 6 cores and 12 threads. In this article, we will show you how to enable all processor cores on Windows 10.

    Will launch all Windows 10 processor cores

    By default, Windows systems use all the CPU power to achieve the best performance. But in the event of computer failures or viruses, the number of working threads may differ from the maximum.

    First, let’s check the Central Bank for “multi-core”.

    Open “Device Manager” (WinX) and expand the list of Processors.

    If you do not have a multi-GoProcessor system (when the motherboard allows you to use more than one CPU, it is found in the server segment of computers), but the number of all computational processor cores (and physical and logical threads) will be displayed.

    You can also check the specification of your central bank on the manufacturer’s website. Intel or AMD. You can also check the amount through the Windows Registry Editor. Open the registry editor (regedit) and follow the path:

    This thread will contain information about the version, model, revision, frequency and other parameters of the Central Bank.

    You can adjust the number of cores on Windows 10 in the system configuration options. To do this, open the Run (WinR) window and enter the msconfig command.

    Open the Download tab and click on Advanced options.

    We will see a window for configuring memory and processor cores.

    By default, all the checkboxes Must be unchecked (the number of cores is indicated as 1) and these parameters are inactive. To activate all processor cores in Windows 10, check the “Number of processors” box and select the maximum available number in the drop-down menu (in our case, it is 8).

    Click OK and reboot to make changes to the system.

    You can enable the second core of the Windows 10 processor in the same way by setting the value to 2 or by Unchecking the “Number of processors” checkbox, in this case the number will be determined based on UEFI data (BIOS).

    Connect all Windows 10 processor cores via UEFI

    You can change the number of cores Not only in the system parameters, the UEFI (BIOS) of the motherboard can also help with this.

    Depending on the parameters of the central unit and the manufacturer of the motherboard, the settings can vary significantly. Motherboards above the budget level allow you to fine-tune the work of the internal processes of the system, from the speed of the coolers, ending with overclocking the CPU and memory.

    Using the Asrock Z68 motherboard as an example, Advanced settings. CPU Configuration will allow you to configure the number of active cores and enable / disable Hyper-Threading and set the desired settings for the CPU.

    Hyper-Threading. Intel multithreading technology. Allows use on one physical core. 2 logical threads of calculations. Four. 8 threads, etc.

    The Active Processor Cores setting is responsible for the number of active CPU cores. The picture shows the choice between All, 1, 2 and 3, since the i7.2600 is a quad core.

    By selecting the value All you can use all processor cores.

    If you are wondering how to enable 2 or 4 cores on Windows 10 Using UEFI, then in the advanced CPU settings you can configure Not only the number of cores, but also the number of threads.

    Worth Note that the functionality depends on the manufacturer of the BIOS version.

    Unlock application kernels

    It is worth noting that applications are built on the basis of tools provided by Microsoft. Therefore, the application is created with the necessary conditions for using multithreading or a single core. If the application was created with the use of one core in mind, unlocking all of them, you will not notice the difference in performance.

    But there are different cases where unlocking them helped fix some performance issues and lags. To do this, open the Task Manager (CtrlShiftEsc) and go to the Details tab. Among the large number of applications, find the one you need and press RMB. Then, select set affinity and in the next window select “All processors”.

    How to disable the processor core in Windows 10?

    Using all the methods described above, you can disable the CPU cores. This can help you in case of overheating, but only in extreme cases. We do not recommend disabling or enabling kernels, unless it is necessary for this, otherwise you may face multiple errors and BSODs.

    How to unlock cores on AMD processors?

    CBs of the Phenom II, Athlon X2, Athlon II, Sempron families have hidden potential in the form of blocked cores. The essence of hidden cores is to reject the central bank with a larger number of them (indicators DO NOT fit into the standard, errors, overheating, etc.). For example, you buy a 2-core CPU that has 4 physical cores, but they are NOT active.

    How to enable Cortan in Windows 10?

    To return its operating system to its former popularity and sympathy of users, the developers of the “dozen” began to implement a number of new functions.

    READ  How to Save Video From WEB-camera

    One of the most anticipated features of the latest version of the operating system is a voice assistant called Cortan.

    By its distribution to the top ten, Cortan was only visible on smartphones with Windows Phone 8.1. In general, the history of the existence of the virtual assistant is less than 2 years old, or, in spite of this, the growth rate of Cortana’s versatility is really impressive. In the foreseeable future, the creators plan to attract voice support to the Maps application.

    All this is of course good, but this surprise from the company could not be used by everyone who had already installed the update. The reason is banal. the creators simply could not physically make a Polyglot out of Cortana in a short period of time. But there is a way that will allow you to start “communication” with a computer assistant. Comments, this way is not waiting for the release of the Russian version. So how will you enable Cortan on Windows 10? However, about everything in order.

    For a start, it’s worth giving credit to those lucky ones who got Cortan hot, and even in their own language. These are the USA, France, Australia, India, Germany, Italy, Spain, Japan and China. There is an English version in Canada, and a French version is also being developed. Mexico, Brazil and Russia are waiting in line.

    According to the developers, versions for waiting countries should be released during the first half of this year, but given certain difficulties during the creation of a version in another language, the release can be significantly postponed.

    Perhaps, it is not worth adjusting the creators, because it is better to get a quality product, and not to make it just for show. Actually, let’s move on to the mysterious way of including Cortana without the Russian version, which was mentioned at the beginning of the article.

    Cortan in Windows 10 in Russian

    In the event that you use the OS in one localization, then the attempt to connect the virtual assistant will end in failure, since Cortan will display a message that the program is not available for this region.

    How to enable Cortan in Russian?

    To connect, you will need to add the language of the country in which the personal assistant is supported. Of course, it is better to choose a language that is closer and more understandable to you, otherwise the connection will not make much sense in the absence of language skills.

    The addition of a language is carried out in the “Parameters” section, the “Time and language” subsection and the “Region and language” item. After choosing the language, select the item “Use as primary language” and click on the corresponding country of the native speaker and its time zone.

    Next, you need to download the speech pack to add in the language parameters. Next to the option “Use as primary language” is “Options”. Click on the button and download a file called “Speech”, thanks to which the necessary speech files will be downloaded.

    Then go to the next option “Voice recognition”. The point is in the window, select the language of communication with the virtual assistant. In case of doubt about our language data, we activate the function “recognize foreign accents of this language”.

    This is where the simple language settings end. To activate the changes, please log back in or restart your computer. The next step is to enable the “Cortana can give you suggestions, ideas, reminders, alerts and more” function (this option can be activated in the settings by opening the search). Actually, the voice assistant is ready to listen to your questions.

    Activating the program using “Hey, Cortana

    After setting the appropriate language settings, the virtual assistant can be activated in the second way. The voice command “Hey, Cortana” will let the owners of artificial intelligence in action. This feature, again, came from smartphones. on the Lumia 930 and Lumia 1520 models, this innovation was once greeted with a bang.

    According to the standard settings, the voice command can be deactivated, therefore, a short algorithm for enabling it is described below:

    Search. settings. paragraph “Let Cortana respond when you say” Hey Cortana “.

    Actually, that’s all.

    In the mobile version, you should expect confirmation of the activation of the command, but on the PC, after enabling the option, you can immediately proceed to requests.

    Despite the slightest differences between the phone version and the PC version, smartphone users who used the command on their device will have to get used to the new PC version.

    How to use Cortan?

    In cases where you are NOT predisposed to a conversation with Cortana, you can use the keyboard shortcut.

    Using the combination Win Q =, the main page of the virtual assistant will open in front of the user. To open the search press Win S =.

    In general, very simple abbreviations, which will definitely appeal to lovers of keyboard shortcuts.

    Actually, this is all that we can tell about one of the most discussed new products of the “dozens”. If you believe the rumors, then several countries, including the Russian Federation, will receive their Cortan by mid-2016. On the other hand, this statement lends itself to great doubt, since the Xbox services are not yet properly Russified. Does this mean that the Russian Cortan will be heard only in 2017. unknown.

    In any case, those. Those who have already used the virtual assistant on smartphones or who just can’t wait to have fun with the OS innovations on a PC can use our tips and start communicating with Cortana right now. If you are not proficient in any of the supported languages, do not despair. finally you will have a new reason for learning foreign languages.

    How to turn on Bluetooth on a Windows 10 computer?

    Many users are used to sending and receiving files over the Internet. However, there are times when there is no network connection or the Wi-Fi on the laptop does not work. The forgotten Bluetooth module comes to the rescue. How to set up, enable Bluetooth in Windows 10, select and install drivers correctly?

    Preparatory stage

    The preparatory stage for setting up Bluetooth in Windows 10 means checking for the presence of the module itself. It is without him that it will be impossible to launch Bluetooth in Windows 10.

    Determining the presence of an adapter on a laptop is quite simple. Its icon is located on the keyboard, or rather is located on the F2, F3 or F9 keys (depending on the device model).

    If there is such an icon, it is worth examining the specifications of the PC. If you don’t have instructions, there is a sticker on the back of the laptop or on the front. It always has a Bluetooth icon (if available for this model).

    Correct selection of drivers

    The driver for the Bluetooth module in Windows 10 must be selected taking into account the manufacturer. It could be Intel, Broadcom and others. For the correct determination, it is worth using the AIDA64 program, which will accurately determine the device. Go to the “Devices” tab, “Windows Devices” and look at “Bluetooth”. Copy hardware ID data.

    We insert the data into the search term and search for Windows 10. Please note that this is the website of the laptop manufacturer.

    Load and run the driver. After installation, restart the PC. Checking if Bluetooth works.

    Turn on Bluetooth in Windows 10

    The first and easiest way to turn on Bluetooth on a laptop is to press the Fn key and the corresponding module F2, F3 or F9 button.

    However, if this method doesn’t work and Bluetooth doesn’t work, it’s worth checking the software settings. Click “Start”, “Options” and select “Devices”.

    Drag the slider to the “On” position.

    A new window will appear. We set all the boxes to activate the module.

    You can also enable or disable Bluetooth using the command line. To do this, you need to download the DevCon program and move it exe.file to the “System32” folder. Then we look at the Bluetooth ID. After completing these steps, we launch the “Command term (administrator)”. Enter “devcon enable ID”, where ID. this is the bluetooth number. The program activates bluetooth in Windows 10.

    If this method also did not work and it was not possible to turn on Bluetooth, you should refer to the BIOS settings. In the “Onboard Device” tab we find “Set Bluetooth”. Its value should be “Enable”.

    Then press “F10” to save the changes and restart the PC. The module should work.

    Also for how to enable Bluetooth on a Windows 10 laptop, see

    How to customize windows 10 to classic look. How to make Classic Start in Windows 10

    After upgrading to Windows 10, many users are DISAPPOINTED to the redesigned Start menu. In Windows 7, it consisted of two parts: the left one. previously used programs, right. My computer, Control Panel, other elements for configuring and managing the system. To return to the classic look of the Start menu in Windows 10, just follow some tips.

    Ways to Return the Classic Start Menu to Windows 10

    In order to make the Windows 10 Start menu look like the classic Windows 7 menu, it is worth removing all Metro tiles. To do this, we perform the following actions.

    • Right-click on the element and select “Delete”.
    • In this way, Delete all tiles, until we get the classic look of the menu.

    You can return the classic Start menu to Windows 10 by using ClassicShell, which runs in Compatibility Mode.

    • Download and Install the program. Choosing components for installation. In this case, we need “Classic Start Menu” and “Classic Explorer”. The latter modifies the Explorer. You can also return the old look of the Control Panel, which in Windows 10 is not too different from the IE browser. Select the storage location for the program folder and click “Next”.
    • Following the prompt of the installation wizard. After completion, click on the Start button. A new settings window will appear. Selecting the element model.
    • The Start Menu will look like this.
    • All elements on such a menu can be swapped, adjusted the size and other parameters.
    • The explorer will look like this.
    • Control Panel will not look too different from previous versions of Windows.

    You can also use the options menu to make the button and Start menu look classic. To do this, do the following:

    • Click “Start”, “Settings” and select the “Personalization” section.
    • In the left menu, select “Start” and disable the function “Open the initial screen in full screen mode”.
    • The Start menu will look like this.

    How to make a classic “Start” in Windows 10: a few simple recommendations

    With the transition to the tenth modification of the Windows operating system, most users were very happy that the “Start” button appeared again in the system interface, which was absent in the eighth version. However, the menu combines both the classic look and the innovations of Windows 8. This applies to a large number of unnecessary tiles with links to services, services and programs. And many users would like to return the classic “Start” menu for Windows 10, so that the existing one does NOT clutter up the “Desktop”. How to do this will be discussed further. An ordinary user can be offered three simple options.

    READ  How to open WEB-camera settings

    Issue price

    The user audience was divided into two camps regarding the innovations in the main menu. On the one hand, it is argued that in terms of control, it has become more convenient, because you can pin your own frequently used programs in it without the need to display a shortcut to the “Desktop” or pin applications to the “Quick Launch”.

    With another. it is considered that the menu takes up too much space on the screen, and many tiles are animated, which somewhat distracts from work. However, each user has their own preferences. However, for those looking to restore the classic look of the main menu, there are some easy solutions.

    How to make a classic “Start” in Windows 10 by the simplest method?

    Let’s start with the most basic things. As you can see, immediately after installing the system on a computer, the main menu is quite large. But this does not mean at all that it cannot be changed.

    In other words, the question of how to make a classic “Start” in Windows 10 can be based on this. To resize, place the cursor on the edge or corner of the menu window and drag to the left (or down, if required) to reduce the size.

    Of course, it will simply turn out to be a kind of classic menu, and not the option that many are used to seeing. Therefore, you can make a classic Start menu for Windows 10 in the second way. The crux of the matter is simply to get rid of the tiles fixed in it.

    There is nothing easier than using RMB on each tile and choosing the undock command from the context menu. When all items are removed, the menu will return to its normal appearance.

    How to return the classic “Start” to Windows 10 using third-party programs?

    But it is not always convenient to do manual unpinning of tiles. To simplify yourself solving the problem of how to make a classic “Start” in Windows 10, you can use utilities specially designed for THESE purposes.

    Among the most popular programs are Stardock Star 10 Classic Shell, iObit Start Menu, etc. All three applications are almost equal in their capabilities, but many users and specialists who have tried them in practical use recommend installing the Classic Shell program. Firstly, it takes up a minimum of space and does NOT affect the RAM, even when working in the background. Secondly, the application does NOT cause conflicts in the system or violations of any settings.

    Separately, it should be noted that using this utility, you can achieve that the main menu will look exactly the same as in the “old” Windows 98!

    Possible violations in the operation of the “Start” button and the main menu

    With the question of how to make the classic “Start” in Windows 10, we figured out. Let’s look at the Potential Failures. Sometimes you may encounter a Windows 10 Start menu error when the start button itself disappears, it so happens that the menu is NOT called (moreover, neither by pressing the button, if any, nor by the Win key).

    There are several methods to fix such failures. In the simplest case, you need to restart the Explorer service in the “Task Manager”.

    You can use the EnableXAMLStartMenu registry key with the value “0” instead of one (if there is such a key, you need to create the Corresponding DWORD parameter). Using Custom Commands in the PowerShell Console also helps. Sometimes it may be necessary to remove one of the installed updates and then block it.

    But all this seems too complicated for an ordinary user. Therefore, it is better to download a small program called Start Menu on the official Microsoft website, which, after launch, will fix all errors.

    In general, there is nothing particularly difficult in changing the new view of the Start menu to the classic version. As for errors and crashes, the easiest way is to download a special utility so as not to experiment with the registry and the PowerShell console (especially since not everyone knows how to handle these system tools).

    In terms of changing the menu itself, special programs are quite suitable, since in the background they do not affect the RAM or the processor load (this, so to speak, for the laziest ones who do not want to manually remove tiles). True, they will constantly be located Not only in the list of active processes and services, but in the system tray, but you will have to put up with this.

    How to return the classic Start menu to Windows 10

    Many users love the good old classic Windows Start Menu. It is convenient, understandable, familiar and concise. Can I get it back on newer versions of Windows, including Windows 10? Let’s see.

    This is what the modern Start menu looks like in Windows 10 now.

    Modern Start Menu in Windows 10

    It has changed noticeably compared to the classic Start menu. The first thing that catches your eye. these are, of course, live tiles, which can be dragged around the menu, resized tiles, grouped, renamed groups of tiles. You can also resize the Start menu by stretching it with the mouse. The section of frequently used programs has been preserved. Navigation through all installed programs has become more convenient. Access to the computer parameters was also left. By right-clicking on the “Start” menu, you can open many additional options, including control panel, network connections, task manager, device manager and others.

    But how do you get the Start menu back to its classic look? In short, there is no way to return the classic menu appearance in the Windows 10 operating system itself. You can only bring it closer to the classic look. For this:

    • Disable all live tiles; to do this, right-click on each tile and select Unpin from Start Screen; Remove Live Tiles from the Windows 10 Start Menu
    • Resize the Start menu by dragging the mouse over the edges to the desired size;

    Resizing the Windows 10 Start Menu

    Well, we got something similar to the classic “Start” menu. If you need to completely recreate “the same” classic menu, then you cannot do without Special utilities.

    2classic Windows 10 Start menu using third-party programs

    There are many programs out there that give the Start menu a classic look. The most popular ones. these are IObit Start Menu, Classic Shell and Stardock Start10. The first of them has support in Russian, which is important.

    Classic Start Menu with IObit Start Menu

    The same programs, by the way, will replace the missing Start menu in Windows 8, as well as return the classic view to Windows Explorer.

    The illustration compares the default Windows 10 Start menu with the Start10 customized menu as an example.

    Comparison of the default Start menu and the menu customized with Start10

    All of these programs have a wide range of settings, are stable in operation and are compatible with Windows 10. With them, you can give your Start menu even the classic look of the Windows 98 menu, albeit an advanced modern one, but different from the standard one offered by Microsoft.

    How to customize the Start menu in Windows 10. Full Screen and Classic Mode

    The Start menu has a combined, hybrid interface in Windows 10, which is taken from Windows 7 (let’s call such a classic menu) and from Windows 8 (let’s call tiled). The new menu is divided into two parts: on the left side is classic, and the case is tiled.

    In order to return to the tiled display of the Start menu, right-click on the desktop and select Personalization in the menu that opens.

    Personalization will open, on the left, select the Start option.

    Next, you need to set the switch to On, that is, Open the initial screen in full screen mode.

    Now, if you press the Win key or the Start menu icon, the start screen will start to display in full screen mode.

    There is another way to go back to the tiled interface. You need to switch to tablet mode, then the Start menu will work in full screen mode. To do this, click on the Notification Center icon on the taskbar, the Notification Center will open, here we select the tablet mode.

    In order to return to the original Windows 10 Start menu (with partial display of the classic Windows 7 menu), you must repeat one of the above operations in the reverse order.

    Was the information helpful? Share the link on social networks! thanks!

    Back to articles

    Windows 10 Classic Start Menu.

    It’s easy to make the Windows 10 Start menu classic.

    If you want to remove the tiles from the right side of the menu, just right-click on the tile and select “Unpin from Start”. Do the same in turn with all the tiles in the window.

    After that, it seems like the window remains, but this can be fixed by simply pulling the edge of the window from right to left. This left the Start menu completely tiled.

    If this is not enough for you, then you can make the menu look almost the same as in Windows 7. To do this, you will need to use NOT standard tools, but an additional program. The most popular of these utilities is Classic Shell.

    To install it, open your browser and simply enter Classic Shell in the search engine. No need to go to the official page, but you can go directly to the download page.

    On the download page, click on the link with the Russian language.

    The file will start downloading and after it finishes, run the file. The installation process begins, click “Next” to proceed to the next stage.

    In the “Custom Installation” menu, select which components we need to install. This program installs Not only the classic start, but also the classic explorer, Internet Explorer and can also install its updated module.

    If you need to change only the start menu, then click on the icon to the left of the element and select “the component will be completely inaccessible”.

    This should be done with all components except the “Classic Start Menu”.

    Click “Next” and then “Install”.

    If errors appear during installation, click Skip. At the end of the installation, for convenience, uncheck the box “Open documentation” and click “Finish”.

    After that, the settings menu may appear, or the start menu may change immediately. To enter the settings, right-click on the start icon and select “Settings”.

    In this menu, you can customize your Start menu as you wish. If the settings are few, then you can call it “Advanced settings of the Start button” and the program will open many additional tabs.

    If you want to return to the previous view of the menu, then right-click on the Start icon and select “Exit”.

    Link to video review:

    Copyright (c) 2020 HTFI. Copying of information is allowed provided that active links to sources are indicated.

    BYRGPUB.COM 2021