Table of Contents

3 Ways to Record iPhone and iPad Screen Video

If you need to record a video from the screen of your iOS device, there are several ways to do this. And one of them, recording video from the iPhone and iPad screen (including with sound) on the device itself (without the need to use third-party programs) appeared quite recently: in iOS 11 there was a built-in function for this. However, in earlier versions, recording is also possible.

This manual describes in detail how to record video from the iPhone (iPad) screen in three different ways: using the built-in recording function, as well as from a Mac computer and from a PC or laptop with Windows (i.e. the device is connected to a computer and already on it records what is happening on the screen).

How to Record iPhone and iPad Screen Video on Windows 10, 8 and Windows 7

Note: to use the method, both the iPhone (iPad) and the computer must be connected to the same network, it does not matter via Wi-Fi or using a wired connection.

If necessary, you can record video from the screen of your iOS device from a Windows computer or laptop, but this will require third-party software that allows you to receive broadcast via AirPlay.

I recommend using the free program LonelyScreen AirPlay Receiver, which can be downloaded from the official website http://eu.lonelyscreen.com/download.html (after installing the program, you will see a request to allow it to access public and private networks, you should allow it).

  • Launch LonelyScreen AirPlay Receiver.
  • On your iPhone or iPad connected to the same network as the computer, go to the control point (swipe from bottom to top) and click “Screen Repeat”.
  • The list will show the available devices that can broadcast the image via AirPlay, select LonelyScreen.
  • The iOS screen will be displayed on the computer in the program window.

After that, you can record video using the built-in Windows 10 screen recording tools (by default, you can call the recording panel with the WinG keyboard shortcut) or using third-party programs (see Best programs for recording video from a computer or laptop screen).

Screen video recording using iOS

Starting with iOS 11, a built-in function for recording screen video appeared on the iPhone and iPad, however, a novice owner of an Apple device may not even notice it.

To enable the function, use the following steps (remember, you must have iOS version 11 or higher).

  • Go to Settings and open the “Control Center”.
  • Click “Customize Controls”.
  • Pay attention to the list ” controls”, there you will see the item “Screen recording”. Click the plus sign to the left of it.
  • Exit the settings (press the “Home” button) and drag the bottom of the screen: in the control center you will see a new button for screen recording.

By default, pressing the screen recording button starts recording the screen of the device without sound. However, if you use a strong press (or long press on iPhone and iPad without Force Touch support), a menu will open as in the screenshot, in which you can enable sound recording from the device’s microphone.

After the end of the recording (performed by pressing the record button again), the video file is saved in.mp4 format, 50 frames per second and stereo sound (at least on my iPhone this is the case).

Below is a video instruction on using the function, if something remains incomprehensible after reading this method.

For some reason, the video recorded in the settings was out of sync with the sound (accelerated), so I had to slow it down. I assume that these are some features of the codec that could not be successfully digested in my video editor.

Screen Recorder in QuickTime on MacOS

If you own a Mac computer, you can use the built-in QuickTime Player to record video from your iPhone or iPad.

  • Connect your phone or tablet with a cable to your MacBook or iMac, if necessary, allow access to the device (answer the request “Trust this computer?”).
  • Launch QuickTime Player on your Mac (you can use Spotlight search for this), and then, from the program menu, choose File> New Video.
  • By default, webcam recording will open, but you can switch the recording to the mobile device screen by clicking on the small arrow next to the record button and selecting your device. There you can also select the sound source (microphone on iPhone or Mac).
  • Click the record button to start recording your screen. To stop, press the “Stop” button.

When you finish recording your screen, choose File> Save from the QuickTime Player main menu. By the way, in QuickTime Player you can also record Mac screen, for more details: Record Mac OS screen video in QuickTime Player.

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

How many minutes can you record? Recorded the screen for 1 hour 50 minutes, and the recording did not come.

I don’t know for sure, but Google suggests that someone wrote down for two hours, i.e. most likely rests on the availability of free space on the device (sort of like 1 GB for 4-6 minutes, depending on the resolution)

iPad Pro: How to Enable & Use Screen Recording (Enable Microphone too)

Hello! I am making a screen recording with sound. Everything is preserved. Then I want to send via WhatsApp, telegram or email. it is sent without sound. Tell me, what is this problem and how to solve it? thank!

Identical problem. It would be interesting to understand why this is happening.

Thank you very much! I used to look and did not understand how people do this, but now I understood Thank you!

Very cool site, helped me figure out everything that interested me, explained everything verbatim, thanks!)

Video is recorded, but sound is not recorded. What to do?

Dear admin, thanks for the useful info! Tell me which iPhone model is the article talking about? I would like to know which iPhone writes stereo sound

Hello.
I tested it all on an old iPhone 6 Plus. There were definitely two audio tracks, but now I can’t say for sure whether they are different or not (in my opinion, yes).

Can Track iPhone Screen Recording,
If I record?

Hello.
Didn’t quite understand your question.

Good day. As soon as I turn on Sound Recording, the sound in the video is muffled (very much to barely audible). During playback, noise and sounds from the outside are heard, and the sound from the video is almost inaudible. What could be the problem?

Hello.
Do you want to record a video with sound that is playing on your phone right now? He can’t do that. And when you turn on the sound recording, he writes from the microphone and mutes the playback sound, and what appears on the recording is what “got” into the microphone.
In general, it’s not easier to download a finished video somewhere without recording from the screen?

Hello. On this program from the iPhone The maximum video recording time is 2 minutes. Why is that? I would like to record a video up to 20 minutes long.

Perhaps these methods and computer recording will work?. https://remontka.pro/mirror-iphone-screen-pc-mac/

Thank you very much, otherwise you will look at these paid applications, plus everything with their cosmic-ebical prices.
Thank you for such people

Cool, thanks for the tips, in general I really like your portal, everything you need and to the point.

Reflector program

You can also record video from the iPhone screen using third-party applications. One of them is Reflector. Immediately, we note that this utility is available on the two most popular desktop platforms. Windows and OS X. and has a free version with some restrictions.

Simply put, Reflector emits an AirPlay receiver. And thanks to the Video Replay function, users can display everything that happens on the iPhone on the computer screen. Also, the app has a recording function.

Separately, it should be noted that Reflector does not have its own main window. After launch, users can make some settings related to the quality of the resulting image, if necessary, set a password when connecting, etc.

To start recording, in addition to launching the application on a desktop computer or laptop, you need to do a few simple manipulations with your mobile device:

Open Control Center (swipe from the bottom of the screen).

Select computer as source.

After these manipulations, a new window will appear on the computer, in which everything that happens on the screen of the mobile device will be displayed. It will also have hotkeys to start recording a screencast.

It should be noted that for this method to work, the mobile device and the computer must be in the same Wi-Fi network. Otherwise, you will not be able to connect the devices to each other.

In addition, the “smoothness” of the picture will directly depend on the quality of Wi-Fi. With a weak or slow wireless connection, recordings may freeze, freeze or “swallow” part of the picture.

As mentioned above, Reflector is a cross-platform solution. With this utility, users can record iPhone screen video on Windows and Mac.

READ  How to restart iPhone without screen

for those with iOS 11

Starting with iOS 11, all Apple devices have a very entertaining option. the ability to take a video from the iPhone screen. Many people will never use it, and some people, for example, who record videos about games for YouTube, this function is simply necessary. Previously, you had to look for third-party software in the AppStore, but now Apple developers have saved users from this need.

So how do you start recording your iPhone or iPad screen? To do this, you must first bring the application widget to the control panel. To do this, go to the settings, scroll through the menu to the line “Control Center”.

Then click on “Set up ale. Management “.

Here you are required to click on the green plus sign opposite the item “Screen Recording”.

After these actions, we swipe from the bottom and see a widget with an icon, which shows a bold point in a circle.

To just start shooting, click on it. After 3 seconds, everything that happens on the monitor will be recorded. If you briefly hold down the widget, additional settings will open where you can turn off the microphone.

Clicking the icon again will stop shooting. The video file can be found in the “Photos” folder.

Record video from the iPhone and iPad screen

Not all iOS device owners need to create their own screencasts or, more simply, record video from the iPhone screen. However, sometimes such a need may arise. For example, when creating short information videos, recording overview videos, etc. In this article, we will look at several methods of recording screencasts from iPhone.

A few years ago, the process of recording what was happening on the screen of an apple gadget was quite complicated. Users had to either jailbreak or install a number of third-party applications. Now the situation has changed somewhat.

for Mac owners

After the release of OS X Yosemite, owners of apple computers have the opportunity to shoot video from the iPhone screen without resorting to the help of third-party applications. To record you need:

Connect your mobile device to Mac using the supplied cable.

From the File menu, select New Video.

In the window that opens, at the bottom, press the key (checkmark) located to the right of the start recording button.

In the drop-down list that opens, select iPhone as the camera. Also, users can select the sound source. OEM Mac microphone, audio from a mobile device, or a third-party source.

A distinctive feature of this method is a stable connection between the i-device and the computer, due to which there will be no noticeable freezes on the video. However, this method is only suitable for owners of apple computers with OS X Yosemite (and higher). You will also need an iPhone running iOS 8 to record.

Method 4: iTools program

In the absence of a connection to a wireless network, owners of computers based on the Windows operating system can use the third method. In this case, you need an iPhone, cable and iTools app.

iTools is a fairly popular utility from Asian developers. The application is an alternative to Apple’s iTunes media combine. But unlike the program from Apple, iTools has wider functionality. For example, it allows you to record screencasts from iPhone and iPad.

Connect iPhone to computer using the supplied cable.

In the main application window, go to the Toolbox tab.

In the window that opens, press the Record button.

Select recording parameters (quality and folder in which the recording will be saved).

However, it is worth noting that in the case of screencast recording using iTools, it is better to refuse to shoot games or quickly move between windows in applications. The utility simply does not keep pace with the animation on the iPhone screen, which is why slowdowns will be noticeable in the final video, and some frames may “drop out” completely.

How to enable screen recording on ios 12

If you need to record a video from the screen of your iOS device, there are several ways to do this. And one of them, recording video from the iPhone and iPad screen (including with sound) on the device itself (without the need to use third-party programs) appeared quite recently: in iOS 11 there was a built-in function for this. However, in earlier versions, recording is also possible.

This manual describes in detail how to record video from the iPhone (iPad) screen in three different ways: using the built-in recording function, as well as from a Mac computer and from a PC or laptop with Windows (i.e. the device is connected to a computer and already on it records what is happening on the screen).

Screen Recorder in QuickTime on MacOS

If you own a Mac computer, you can use the built-in QuickTime Player to record video from your iPhone or iPad.

enable, screen, recording, ipad
  • Connect your phone or tablet with a cable to your MacBook or iMac, if necessary, allow access to the device (answer the request “Trust this computer?”).
  • Launch QuickTime Player on your Mac (you can use Spotlight Search), then choose File> New Video from the program menu. When you finish recording your screen, choose File> Save from the QuickTime Player main menu. By the way, in QuickTime Player you can also record Mac screen, for more details: Record Mac OS screen video in QuickTime Player.

The need to record the screen on the iPhone does not arise very often. But, if such a need arises, then it is not so easy to implement it, because there are many restrictions on Apple devices. Nevertheless, it is possible and now you will learn how to do it iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

How to Record iPhone and iPad Screen Video in iOS 11

Go to the menu “Settings” → “Control Center”.

Select Customize Element. control “and enable the option” Screen recording “.

Bring up Control Center by swiping from the very bottom of the screen.

Press the button responsible for starting the screen capture.

Done! This is the simple way in iOS 11 to shoot from the screen of an iPhone or iPad. Note that the video is of excellent quality. An example is shown below.

To end the recording, you must press the screen recording button in the Control Center again. Immediately after that, the video you created will be saved in your media library. By default, screen recording starts without the microphone picking up sounds. In order to enable sound recording, you need to hold down the sound recording button in the Control Center and enable the option.

How to Record iPhone and iPad Screen Video on Windows 10, 8 and Windows 7

Note: to use the method, both the iPhone (iPad) and the computer must be connected to the same network, it does not matter via Wi-Fi or using a wired connection.

If necessary, you can record video from the screen of your iOS device from a Windows computer or laptop, but this will require third-party software that allows you to receive broadcast via AirPlay.

I recommend using the free program LonelyScreen AirPlay Receiver, which can be downloaded from the official website http://eu.lonelyscreen.com/download.html (after installing the program, you will see a request to allow it to access public and private networks, you should allow it).

  • Launch LonelyScreen AirPlay Receiver.
  • On your iPhone or iPad connected to the same network as the computer, go to the control point (swipe from bottom to top) and click “Screen Repeat”.
  • The list will show the available devices that can broadcast the image via AirPlay, select LonelyScreen.
  • The iOS screen will be displayed on the computer in the program window.

After that, you can record video using the built-in Windows 10 screen recording tools (by default, you can call the recording panel with the WinG keyboard shortcut) or using third-party programs (see Best programs for recording video from a computer or laptop screen).

Enabling Screen Recording on iPhone with iOS 11

If you have iOS 11 or a newer version of the iOS operating system, then you do not need Jailbreak and third-party applications to enable screen recording on iPhone. You can only record your screen using the built-in tools. To do this, open the iPhone settings and go to the “Control Center” section. Recall, “Control Center” is a menu that opens with a swipe from the bottom edge of the screen. There you can adjust the screen brightness, as well as other commonly used iPhone functions.

After you have opened the section with the settings of the “Control Center”, you need to go to the subsection “Customize controls”.

This will take you to a menu where you can customize which items will be available in the Control Center. Here you can add and remove items, as well as change their order. In order to be able to enable iPhone screen recording, you need to add the “Screen Recorder” element.

Now you can enable screen recording on iPhone. To do this, swipe up from the bottom of the screen to open Control Center. Then click on the screen recording button, which looks like a dot and a circle. As a result, a countdown will appear inside the button, and then the button will turn red, signaling that screen recording has already begun. To stop recording, return to the “Control Center” and press this button again.

Also, when you turn on screen recording, you can open a menu with additional settings. To do this, you need to press the record button and hold it down for a while. As a result, a menu will appear on the screen in which you can enable sound recording from the microphone.

After stopping recording, the resulting clips can be found in the “Photos” application in the “Videos” album. Using the “Share” button, you can send these videos from the “Photos” application to the cloud storage or by email. You can also connect your iPhone to your computer and upload videos directly, they will be in the same folder as your photos.

Screen video recording using iOS

Starting with iOS 11, a built-in function for recording screen video appeared on the iPhone and iPad, however, a novice owner of an Apple device may not even notice it.

To enable the function, use the following steps (remember, you must have iOS version 11 or higher).

  • Go to Settings and open the “Control Center”.
  • Click “Customize Controls”.
  • Pay attention to the list ” controls”, there you will see the item “Screen recording”. Click the plus sign to the left of it.
  • Exit the settings (press the “Home” button) and drag the bottom of the screen: in the control center you will see a new button for screen recording. By default, pressing the screen recording button starts recording the screen of the device without sound. However, if you use a strong press (or long press on iPhone and iPad without Force Touch support), a menu will open as in the screenshot, in which you can enable sound recording from the device’s microphone.

After the end of the recording (performed by pressing the record button again), the video file is saved in.mp4 format, 50 frames per second and stereo sound (at least on my iPhone this is the case).

Below is a video instruction on using the function, if something remains incomprehensible after reading this method.

How to Record Screen on Old iPhones

If you have an old iPhone and cannot update to iOS 11, then you can use alternative screen recording methods. For example, you can record your iPhone screen using AirPlay technology. As you know, AirPlay allows you to transfer images from your smartphone screen to other devices. And if you transfer the image to a desktop computer, then it will be possible to record it already on the computer using any program. The only tricky part is getting the picture to be received with AirPlay. To do this, you need to install a special program on your computer. For this purpose, programs such as Reflector, AirServer or LonelyScreen AirPlay Receiver can be used on the computer.

READ  What to do if audio is lost on iPad

MacOS users have another option. screen recording with QuickTime Player. To do this, you need to connect the iPhone to the computer and allow access to it by confirming the request “Trust this computer?” After that, you need to launch QuickTime Player, open the “File” menu, go to “New video” and turn on “Record the screen of a mobile device”.

Also you can record screen using iTools program. This program is a whole set of utilities for working with iPhone and other devices from Apple. Among its features is the function of mirroring the screen to a computer. To enable this feature, you need to open iTools, connect your iPhone via cable, and enable Real-Time Desktop in the Toolbox tab. After that, to turn on the iPhone screen recording, you need to click on the Record button.

With iOS 11, Apple has finally added the standard screen recording function for iPhone, iPad and iPod touch. In this tutorial, we talked about how to record video from the iPhone and iPad screen in iOS 11, and also gave work advice on how to solve the problem with the impossibility of recording, which sometimes occurs among users.

How to Record Screen with Apple Music?

  • Open App Clips.
  • Click in the upper left corner, then click.
  • Hold to start recording.
  • Release the record button to stop recording.
  • To watch recorded clips, select a clip in the timeline, then tap.

How to Record iPhone Screen Video with Sound?

Open Control Center and hold down the record switch. you will see a button to activate the microphone. 3. When recording the screen, set the volume to maximum and the sound will be recorded through the iPhone microphone.

How to Shoot Screen Video on Samsung?

Open the quick settings panel by swiping the screen from top to bottom with two fingers. Swipe left, then tap and hold Screen recorder. Here you will see the options available.

How to make a screenshot on iPad 2018?

To take a screenshot on the 2018 11-inch or 12.9-inch iPad Pro, hold down the Top button and the Volume up button at the same time. If you have an old iPad Pro with a Home button, you need to hold it down at the same time as the Power button. If sound is enabled on your iPad Pro, you will hear a distinctive camera shutter sound.

How to enable screen recording on iPad?

You can create screen recording, including audio, on your iPad.

  • Go to Settings Control Center Customize Controls and tap the button next to Screen Recording.
  • Open Control Center, tap
  • To stop recording, open Control Center, tap

How to enable screen recording on 11 iPhone?

  • Select Settings Control Center Customize Items. Controls “and click next to” Screen Recorder “.
  • Swipe up from the bottom of any screen.
  • Press hard
  • Click Start Recording and wait for the 3 second countdown to complete.
  • Open Control Center and tap

How to Record Screen Videos on iOS 11

The procedure for recording video from the screen in the new firmware does not require any special skills. It is enough to follow a few simple steps:

In the section, click on the item “Customize controls”. Among the proposed options, select “Screen Recording” and click on the green plus sign, which is located next to the item.

Close the “Settings” menu and call the “Control Center” application. To do this, you need to swipe up on the screen.

After the specified manipulations, the “Screen Recorder” icon will appear. With a long press, we call up the built-in menu of the application, which allows you to make additional settings (turn on / off the microphone during recording, other parameters).

To start shooting everything that happens on the screen, click on the “Start recording” item. Next, you can perform the necessary manipulations with the phone that you would like to display on the video. Information about the shooting process will be posted at the top of the gadget screen.

  • After the shooting has been completed, click on the “Stop” button.
  • The recorded video is saved on your device in automatic mode, to access it, just go to the library of the “Photos” application.
  • QuickTime

    This software is standard for Mac OS computers. QuickTime allows you to work with playback and video creation quickly and without installing extra software. over, this service is synchronized not only with the iPhone of any OS version, but also with the iPad and iPod.

    • We connect the device to the computer using a cable.
    • Configure access by clicking on the “Yes” button in the “Trust your device?” Window that appears on your smartphone.
    • On the computer desktop, in the Spotlight search field, enter “QuickTime”, launch the found shortcut.
    • In the program window, open the “File” tab and create a new record.
    • The recording mode will appear on the phone in the field that opens. In order to record the iPhone desktop, click on the arrow next to the play button and select “iPhone”.

    You can start or stop recording by pressing the red “Capture” key. During the process, you can temporarily stop recording and resume it.

    An important point is conservation. To prevent the video from being deleted, in the QuickTime menu, select “File”. “Save As”.

    Record video via PC with Lonely Screen AirPlay Receiver

    LonelyScreen AirPlay Receiver. software for Windows OS for recording video from the iPhone screen.

    • availability of a paid or free version of the program;
    • pairing iPhone and computer via a single Wi-Fi network.

    How to record a display using this program:

    • Download and install LonelyScreen AirPlay Receiver on the PC, open the program to access the detected networks.
    • Check if both devices are connected to the same network.
    • On the iPhone, go to the “Control Center”.
    • Click on the “Screen Repeat” button.
    • In the list of available devices for repeating, select Lonely Screen.
    • After syncing, your computer will display the iPhone interface.
    • To make a video, you need to use third-party Windows programs or standard features (for example, press the WinG keyboard shortcut).
    • From the opened game panel, launch the screen capture option.

    How to Record Video from Your iPhone or iPad |

    You can take a screenshot on the iPad with a simple click of a button. However, screen recording requires a few additional steps.

    How to bring iPhone screen to computer

    The first thing you need to do is connect to your PC for iPhone using a Lightning cable or wireless Wi-Fi.

    The main meaning of this method is based on the ability of iPhones to broadcast a screen to an external receiver device. In this case, such a signal is intercepted by a third-party utility and the video is recorded.

    • Open the installed interception program on your computer:
    • Unlock the Apple iPhone smartphone, call the bottom pop-up menu with a short gesture from the bottom up. You must select the broadcast option. “Screen Repeat”. this is the standard Car Play utility:
    • A list of sources available for broadcast will be displayed in the window that opens. From the entire list, you will need to select the item corresponding to the name of the installed program:
    • Now you need to expand the program window on the monitor of a personal computer, there should be a duplicate image of the smartphone in real time.

    Another interesting article for you: How to remove the scale of the video on the iPhone

    Click on the red button in the program interface on the computer to start recording

    The countdown appears on the timer to the left of the button. To end the recording, click on the same button:

    After you record a video or create an iPhone screen shot, it will be saved to your computer’s hard drive. To quickly go to the directory where the video was saved, click on the folder image in the lower right corner:

    In order to transfer it to the iPhone, it is recommended to use the iTunes program or upload a video through the “cloud” storage.

    The screen capture option is useful for iPhone owners when creating various training videos. And also if you need to quickly show someone how to use a particular function.

    Screen Recorder on iPad

    To record a video or screen image on your iPad and follow through with the next steps, you first need to add Record to Control Center. This can be done by selecting the sequence “Settings” = “Control Center” = “Customize controls”.

    Then select “Screen Recorder” and click the green plus sign next to it.

    This will add it to the list of included items in Control Center.

    At this point, we have completed the preparation for recording and now go to Control Center by dragging it from the upper right corner, where the Record button is located. By clicking on it, we start the selected record.

    Tips for Recording Screen Videos Correctly

    If you want to get a high-quality video in which all your actions will be heard and seen without unnecessary frames, check out the tips that we have published below. They will help you 100%:

    • Be sure to turn on the Do Not Disturb option or activate the Airplane mode, otherwise all notifications that go to your device will also be captured in the video. But there may also be confidential information, for example, correspondence on social networks, notifications of purchases on the Internet, etc.
    • When you start recording, frames will be captured when you activate the screen capture option in the control room. But you can trim the beginning and end in a few clicks using the standard tools of your iPhone.
    • Remember to activate the microphone using 3D-Touch in the control center, otherwise you will not be heard. When doing this, try to stay away from other sound sources so that there is no overlap.

    In general, as you can see, there are a lot of options for recording video from the screen of your iPhone, but the most convenient is to use the standard iOS 11 tools. If you have an old version of the system, you will have to connect it to your computer, and in some cases, even. purchase additional software.

    • What is the name of the program that changes the color of your hair
    • How to connect and pay with Apple Pay on iPhone instead of Sberbank
    • Siri shortcuts: set up and use

    What to do to record video from the iPhone and iPad screen on iOS 8, 9 and 10 without using a computer

    With the AirShou app, you can record video from your smartphone screen without using stationary equipment. Because the specified software is not included in the range of the App Store, you need to download it from third-party sources.

    How to Record iPhone Screen Video with AirShou App

    To start recording. on your iPhone or iPad, run the application.

    At the first start, you need to give consent to the application to use the camera. Click “Agree”, after which the main menu opens, where we select “Record”.

    Next, it is proposed to name the future video and select the desired resolution and screen orientation.

    In order to record a video, in the “Available AirPlay Devices” menu, select “AirPlay Video Replay” and then “AirShou” with your specified iOS device.

    To end video recording using the app, click on the Stop button.

    You can watch the recorded video by clicking on the icon in the upper right corner of the application.

    READ  Samsung a 50 how to unlock the screen

    How to Record iPhone Screen Video

    Sometimes there is a need to record video from a smartphone screen. Due to the peculiarity of Apple technology, many owners of gadgets such as iPhone and iPad face some difficulties in performing this task. IOS models up to version 11 required additional software or a PC connection to record video from the screen. In the proposed article, we will consider the main existing methods of recording video from the iphone screen.

    IPhone and iPad Screen Recorder with Windows 7, 8, and 10

    To use this method, it is necessary that the iPhone or iPad and the computer are connected to the same network, be it either Wi-Fi or a cable. The free program LonelyScreen AirPlay Receiver, which can be found on the official website, will be very convenient.

    To record using this program, you must:

    • On your gadget, which is connected to the same network as the PC, log into the control center and select “Screen Repeat”;
    • A list of available devices will appear, in which you need to select the “LonelyScreen” item;
    • After clicking on the computer screen, the screen of your iOS will be displayed.
    • Now you can record a video using Win10 tools: if you use the standard method, call the recording panel using the WinG keyboard shortcut.

    AirShou installation instructions for recording video from the screen of apple gadgets

    To record videos with AirShou, visit sites such as emu4ios.net or iEmulators.net. To install it on iPhone and iPad, select the “Install” button and confirm the download when the pop-up window appears.

    When the application is installed, go to the “Settings” menu, select “General”, then “Profiles”. In the menu that appears, you need to find and click on “Suzhou Ding Chi Network Tech”.

    For the full operation of the application, click on the “Trust Suzhou Ding Chi Network Tech” button and confirm the action.

    How to record video from iPhone or iPad screen on IOS 11 and above without using a computer

    A quick guide to enable iPhone 11 and iPad screen recording

    • Now you should close the item “Night-time” and return to the “Control Center”. It’s very simple to do, you need to swipe up on the screen, where a button for recording a video will appear. By long pressing this button, you can call up a menu that will allow you to control the recording (pause the recording, turn on the microphone);
    • From this menu, click Start Recording to start shooting. While recording is in progress, you can freely use the gadget. Shooting will be indicated by a red bar displayed at the top of the screen;
    • To stop recording, tap on the red bar and select “Stop”;
    • After recording, the video will be saved in the gallery.
    • The first step is to connect your iOS 11 and below to your computer using a gadget and, if necessary, allow access to the device;
    • Run the application on your computer, select “File” from the menu and then “New video”;
    • Recording will start by default with the front camera, so you need to switch recording to the iOS screen. To do this, click on the small arrow next to the record button. In addition, the program allows you to change the sound source, which is supported even by iPhones of versions 6s, x, 6, 7;
    • To start recording, click on the record button;
    • The captured screen recording is saved in the “File” program, then “Save”

    Can I record apps that play videos?

    It depends on the application. Screen recording does not work at all when you have some applications running, such as Netflix. (Obviously, recording videos from Netflix or any other streaming service violates its terms of use.)

    On the other hand, YouTube seems to have no restrictions on screen recording at the time of my testing (it is possible that this will change over time).

    How to enable screen recording in iOS 11 and iOS 12

    Start and stop screen recording comes from Action Center. But, first we will add this button there, and then we will explain what happens when you press it.

    • Launch the Settings app on your iPhone or iPad.
    • Click Control Center.
    • Tap the “” sign next to Record Screen to add a function icon to the Control Center if it isn’t already there.

    How to Record iPhone or iPad Screen with iOS 11-12

    Now that the feature has been added to the Notification Center, you can turn it on at any time by swiping your finger across the screen.

    • Open Control Center by swiping up from the bottom of the screen.
    • Click on the screen recording icon. It looks like a large dot inside a circle and, when turned on, changes color from white to red.
    • Exit the Control Center by dropping it to the bottom or simply by clicking on the down arrow at the top of the screen.
    • When you’re done recording, open Control Center again by swiping from the bottom of the screen to the top.
    • Click the screen recording button.

    Expert tip: On iPhones that have a Home button, you can stop recording by clicking on it.

    The banner will notify you that the screen recording has been saved to Photos. You can tap the notification to open the Photo and find it in the Camera Roll folder.

    How to record screen on iPhone or iPad

    This tutorial will show you how to record your iPhone or iPad screen directly from your device and using built-in Mac tools.

    Screen recording from an iPhone or iPad can be a great way to show how an app works on an iPhone, create detailed instructions, and more. IOS 11 introduces a feature that allows you to record screen directly on the iPhone. Following are two ways to record screen on iPhone.

    How to Record iPhone or iPad Screen via Mac Computer

    To record the screen of your iOS device, you need to connect your iPhone or iPad to your Mac and launch QuickTime.

    • Connect your iPhone or iPad to your Mac with a Lightning cable.
    • Open QuickTime on your Mac from the Applications or Dock folder.
    • Click “File”.
    • Click New Video Recording.
    • When the recording window appears on your Mac screen, press the carriage down button (it looks like an arrow) next to the record button.
    • Click on your iPhone’s name under the camera.
    • Click on the name of your iPhone under the microphone if you want to record its audio.
    • Click the record button.
    • Click the Stop button when you want to stop recording.
    • Click “File”.
    • Click “Save”.
    • Write the title of the video.
    • Choose where you want to save the video file.
    • Click “Save”.

    Can i edit video?

    It’s over. Click on the Edit button in the upper right corner and a timeline for trimming the video will appear. You can drag the ends to cut, for example, footage of how you start and stop recording in the Control Center. When you click Finish, the editor will prompt you to save your changes as a new clip.

    You can freely transfer videos to your computer for editing with QuickTime, iMovie, or any other video editor. Or you can upload it to your iCloud Photo Library, to your iCloud Drive, YouTube,. or so on.

    You can also use one of the iPhone video editors to edit videos directly on your iPhone.

    Questions and Answers?

    Let us know if you still have questions about iPhone or iPad screen recording with Mac in the comments below.

    What is the screen resolution of my iphone or ipad? 3 ways to find out. Smartphone. 2021

    iPhones and iPads are well known for their bright and beautiful displays. Their screens. one of the most important things people love about these devices. Have you ever wondered what resolution your iPhone or iPad has? How many pixels on the screen are you looking to make it look good? If you want to know the screen resolution of your iPhone or iPad, read on. We’ll show you several ways to find this specific information:

    How to find out what screen resolution your iPhone or iPad has with ActMonitor app

    ActMonitor. is an application that shows system information about your iPhone or iPad, and also allows you to compare it with data from other devices created by Apple. Install it, open it and go to Tech Specs. There you can find a list of all the specifications of your iPhone or iPad, including screen resolution, in the Display area.

    How to Screen Record On iPad

    How to find out what screen resolution your iPhone or iPad has with the Lirum Device Info Lite app

    Lirum Device Info Lite. is an application that collects and shows you information about your iPhone or iPad, and tracks its performance. Apart from graphs of CPU, memory, or battery usage, it can also indicate what resolution the display has. To find this information, open the application menu and go to “This device”. Show. This is where you will find the screen resolution of your iPhone or iPad.

    How to find out what screen resolution your iPhone or iPad has by checking the model number

    You cannot see screen resolution values ​​in your iPhone or iPad settings. However, there are other ways to find out this information, and one of them is to check the model number of your device and look for its specifications. If you don‘t know which iPhone model you have, you should read this guide: Which iPhone model is mine ?

    Once you know which iPhone or iPad you have, look for its resolution in the following list:

    • iPhone XS Max: 1242 x 2688 resolution
    • iPhone XR: 828 x 1792 resolution
    • iPhone XS, iPhone X: 1125 x 2436
    • iPhone 8 Plus, iPhone 7 Plus, iPhone 6s Plus, iPhone 6 Plus: 1080 x 1920
    • iPhone 8, iPhone 7, iPhone 6s, iPhone 6: 750 x 1334
    • iPhone SE, iPhone 5c, iPhone 5s, iPhone 5: 640 x 1136
    • iPhone 4s, iPhone 4: 640 x 960
    • iPhone 3GS, 3G, 2G: 320 x 480
    • iPad Pro 12.9-inch (2nd generation), iPad Pro (12.9-inch): 2048 x 2732
    • iPad Pro 10.5-inch: 2224 x 1668
    • iPad Pro (9.7-inch), iPad Air 2, iPad Mini 4: 1536 x 2048

    If you want to know more about the screen resolutions used by iPhone and iPad, this article from Apple might come in handy: iOS Device Display Summary.

    You can also find or check what resolution your iPhone or iPad has using apps that display system information. You can find several of these apps in the App Store. However, most of them are either old or poorly developed, and the information they show is often inaccurate. To help you, we searched the App Store to find the best apps of its kind and ended up with a short list of two. Here are the free apps we can find to show you the screen resolution of your iPhone or iPad:

    Do you know other ways to find iPhone or iPad resolution?

    These are the methods we know to find out this information. Unfortunately, none of them are as easy as checking the settings app. Hopefully Apple will add this detail in future iOS releases. Do you have a tip or trick to find out what resolution iPhone or iPad is, to share with our readers and us? If you have, or if you have any questions please use the comments section below.

    BYRGPUB.COM 2021