How to enable home button on iPhone • BYRGPUB.COM

How to start iPhone after long idle time?

Remove iPhone from charging and connect to PC by holding down the Power and Home buttons. Then you need to release the Power button and hold the “home” key for another 15 seconds. An alert should appear on the screen, signaling that the smartphone is ready for recovery.

Where is the Home button on the keyboard?

The Home key is usually found above the End key in the cursor pad. The photo on the right shows how this key might look on the keyboard. It performs the function of returning to the beginning of a line, paragraph, screen or document, depending on the program used.

iPhone 6 Plus: How To Enable Touch Screen Home Button on iPhone / iPod (Assistive Touch)

How to enable a disabled iPhone?

Press and hold the top button until the Power Off slider appears. Move the slider and then wait 30 seconds for the device to turn off. To turn the device back on, press and hold the top button until the Apple logo appears.

How to turn on iPhone 11?

To turn on the device, press and hold the side button until the Apple logo appears on the screen. To turn it off, press and hold the side button and any of the volume buttons at the same time until a slider appears. Then move it.

How to properly launch iPhone?

Insert an activated compatible SIM (iPhone 3GS), Micro-SIM card (iPhone 4, iPhone 4S), or Nano-SIM card (iPhone 5) into your iPhone.
Press and hold the power button for a few seconds to turn on the iPhone. Follow the onscreen instructions to set up and activate your iPhone.

How to answer a call on an iPhone?

Press “Accept” to answer the call. If iPhone is locked, drag the slider. You can also press and hold the center button on the headphones.

How to enable call reset with the lock button on iPhone?

To enable it, follow these steps:

Open device settings.
Select Special. opportunities.
Turn on the function Book. power ends the call.

Where is the Home button on iPhone?

The iPhone Home button is located on the front of the device under the touchscreen display. This button is still present on all Apple phone models and is pressed more often than all other iPhone buttons.

How to enable voice recorder on iPhone and iPad

How to enable voice recorder or how to record audio on iPhone? After starting the application, a working screen appears on a white background with existing entries. At the bottom of the screen there is a black strip with a red touch button, which repeats the “Home” button in size and appearance.

After pressing the button to start recording, the inscription “New recording”, a time sensor and an audio track will appear in a black frame. During the operation of the recorder, one working button will remain, which is a circle with a red square in it. In this mode, you can only start recording and end it by pressing the red button.

Important! The mode is suitable for recording short information or for saving recorded data as separate files.

If you need a selective recording, but save it in one document, you need to expand the black working screen. The Pause and Resume buttons appear. In the pause mode, you can listen to the recorded information. While recording, you can work with other smartphone applications by pressing the Home button. The voice recorder will continue to record in the background.

To record a phone call from an iPhone, a dedicated app or device is required

Note! Only information from external media can be recorded on iPhone, iPad. If it becomes necessary to record a telephone conversation, Apple’s technology will not help with this. This option is not available in the basic configuration. This can be done only through additionally installed applications. The company takes the privacy of personal information very seriously.

Where are voice recorder recordings stored on iPhone

Sound files recorded on the voice recorder are stored in the application itself. When you start the program, a list of audio recordings available on the device appears. Files are placed in the chronology of creation, indicating the date and duration of each.

Apple cares about the safety of information, so it provided users of Apple devices with the ability to create an iCloud backup. Cloud storage of several terabytes will contain all the necessary information. However, it costs Honor that 5 GB is provided for free.

You can create a backup copy manually or configure the automatic backup function. To copy, you need a wireless Internet connection and a power supply.

Voice recorder recordings are stored in the application itself

Note! Files that are sent to the trash do not disappear without a trace. Some time (depending on the selected option in “Clean up Deleted Data”) are stored in the “Recently Deleted” folder. If you delete files from this folder by mistake, you can recover without loss of recording quality.

How to set up voice recorder on iPhone

The function of creating audio recordings has been available since the days of the iOS 3.0 operating system. The first voice recorder had limited capabilities:

creation of monochrome audio recording;
listening;
file storage and deletion.

In this form, it existed for a long time. Voice Recorder iOS 12.0 and later is a true audio editor that allows you to:

create a record;
edit (trim, duplicate an existing record);
share by sending to e-mail, social networks, instant messengers or save to the “Files” folder;
adjust the sound quality;
set the frequency of cleaning deleted files;
customize geo-contextual names of audio files.

Setting up the voice recorder does not take long. The updated version of the application has some small subtleties. In particular, in the voice recorder settings, the Siri and Search tab contains the Quick Commands function to make the program easier to use. The function makes it possible to control the recorder using voice commands. You can use the requests offered by mobile assistants by clicking on the icon. or set your own, saving them for Siri.

Using the “Clean up Deleted Data” tab, you can set the optimal deadline for permanently deleting files that have already been placed in the trash.

Note! For the scrupulous, the item “Never” has been added, which includes the eternal storage of deleted audio recordings. However, keep in mind that unused files will clog your phone or tablet memory.

When you select “Never”, all deleted files will be stored forever in the “Recently Deleted” folder

The “Geo-contextual titles” function has appeared in the settings, after activating which new audio recordings will be automatically named with the address where the recording was made. However, when geolocation is turned off, the function is useless and the files will still be saved as a “New entry” with a sequential number. Both in the first and in the second case, the name of the files can be changed manually.

One of the most important tabs in the recorder settings is “Sound quality”, which contains two items “Compressed” and “Lossless”. The recorded voice information in a compressed form will have less weight, which means it will not take up much space in the phone’s memory. When choosing the second option, the sound quality will be much better, but the weight of such a file, accordingly, will be much larger. This mode is more useful for professionals or in the case when recording is carried out in difficult conditions (extraneous noise, poor sound). For domestic use, the “Compressed” mode is quite enough.

When the geo-contextual names of the record are enabled, the address where the file was created will be automatically assigned as the name

For your information! To adjust the volume, you need to move the device closer or further away from the sound source. If it is not possible to bring the device closer, you can connect an external microphone, with which the recorded voice will be more clear.

Voice recorder on iPhone. where is it, how to set it up

Apple devices can be compared to a full-fledged computer, photo and sound studio. A dictaphone in apple devices is a basic function that allows you to record, store, modify and transfer sound recordings.

How to find voice recorder on iPhone or iPad

All applications on the desktops of Apple devices are mobile. They can be moved to a folder, which often makes it difficult to find the icon. There are three ways to find the app you want:

self-detect on the desktop;
use the search (swipe the screen from top to bottom and enter the name of the desired application in the search box that appears);
ask the mobile assistant Siri to open the required program.

A little advice on how to keep the recorder always at hand, so as not to lose it or be able to use it even when the screen is locked. add the application to the control point that appears when you swipe up the screen for models with the Home button (5 and 6 S, SE, 6) or down if the iPhone has a bezel-less screen (from iPhone 7).

If you take the recorder to the control center, you can turn it on when the screen is locked

For your information! The developer of the iPhone photo editing application M. Rundle noticed that the sound wave on the voice recorder icon was not accidental. It displays a record of the word Apple, which can be easily verified using the same application. Such attention to detail is a definite plus, as it inspires confidence.

How to trim voice recorder on iPhone and iPad

After creating an audio recording, you can edit it. To see all the available editing options, you need to go into the application, select the file, and then click on the button in the lower left corner of the record field, indicated by three blue dots. After clicking, a menu of three tabs will appear:

edit the entry;
duplicate;
to share.

By selecting the “Edit Recording” tab on the iPhone, and “Edit” on the iPad, a black working screen with a red “Replace” button at the bottom of the field, a sound track in the center and a blue square above it will appear. After clicking on the square, another screen will appear with two audio tracks. The top track has two yellow sliders at the beginning and end of the recording. The lower one is enclosed in a yellow frame with direction arrows (oscillogram overview). What you need to do to trim an audio recording:

Determine the boundaries of the beginning and end of the desired segment by dragging either the sliders on the top track, or the arrows on the bottom.
Listen to the selected area to make sure the boundaries are correctly defined.
Press the “Trim” button to remove unnecessary areas and save the desired fragment or “Delete” to erase the selected area.
To complete editing, click “Save” and “Finish”.

The yellow sliders and direction arrows are initially located at the beginning and end of the audio recording. If you need to trim an audio file only on one side, then just use one slider or a directional arrow.

Note! After executing the “Save” command, you cannot change actions or undo editing. To be able to return to the source as a backup, you need to use the “Duplicate” command to create a copy.

Where is the voice recorder on the iPhone?

Finding where the voice recorder is located on an iPhone or iPad is not difficult. As one of the basic features, the application is located on one of the device’s desktops and is indicated by a special icon. The appearance of the icon, depending on the version of the iOS operating system, may have slight differences.

The iPhone voice recorder can be compared to a full-fledged sound editor

For your information! The pre-iOS 12.0 icon depicts a black recording wave on a white background. Subsequent versions show a red and white waveform with a blue slider on a black background.

Before iOS 12, the voice recorder icon was white

American developers of apple devices are trying to ensure the maximum comfort of using devices, therefore all available applications are signed.

How to send voice recorder recording to iPhone and iPad

Saved recordings in the Voice Recorder application can be shared with other users or sent to other digital or cloud media. To do this, you need to launch the application, select the file. Below the button, indicated by three dots, a menu for editing appears with the Share tab. After clicking on it, a list of applications available for sending an audio file from the recorder will appear. Thus, the record can be sent to e-mail, social networks and instant messengers, saved to the “Files” folder.

You can use AirDrop to quickly share audio files between users of Apple devices. To do this, you need to turn on AirDrop in the control center, then go to the “Voice Recorder” application, select a file, go to the “Share” tab menu. Contacts for instant sharing will appear at the top of the list of applications.

Important! The method is convenient only for sharing between iPhones and iPads that are nearby. The downside is that the function is not available from a distance.

Recordings from the voice recorder can be sent to e-mail, social networks, cloud storage

To move voice recordings from iPhone and iPad to your computer, you need to connect the device to your PC, launch iTunes, go to the “Music” tab. In the tab menu, you need to put markers in front of the “Synchronize music” and (necessarily!) “Include voice recordings” sub-items. After that, click the “Synchronize” button located on the bottom panel of the working field. All voice files from the recorder will be copied to the computer in a separate folder “Voice recordings”.

Where is the folder stored and how can I find it? To do this, go to the “Media Library” tab on the main panel, select “Playlists” from the menu. Folder “Voice recordings” will be stored at the end of the list of audio files.

Important! Before starting synchronization via iTunes, you must go to the “Overview” and in the “Backups” menu, click the “Create a copy now” button to protect information from loss if any failure occurs during work.

The voice recorder is difficult to rank among the main functions of a phone or tablet, but no one is immune from situations when it is necessary to record voice information. Therefore, it will never be superfluous to be able to handle the application and know its capabilities.

How to enable Home button on iPhone screen

If you want to display the Home button on the screen of your iPhone, then for this you need to go to the settings and turn on the “Assistive Touch” function there. To do this, open the “Settings” application and go to the “General” section.

Next, you need to open the subsection “Universal Access”.

And go to the settings of the “Assistive Touch” function.

Here, at the very top of the screen, you need to activate the switch, which is responsible for turning off and on the “Assistive Touch” function.

After enabling the “Assistive Touch” function, a floating round button should appear on the screen, which will look something like the screenshot below.

The appearance of this button means that the “Assistive Touch” function is enabled and can now be used to control the iPhone without using hardware buttons, such as the Home button.

Quickly manage settings and open programs

Listed below are the programs and settings that you can quickly access in Control Center.

Enabling network settings

Open Control Center, and then press and hold the network settings card in the upper left corner to enable the following options.

How to Get Home Button on iPhone Screen

Airplane Mode: Quickly disconnect cellular connections on your iOS device.
“Cellular data”: the ability to allow or deny programs and services connecting to the Internet over a cellular network.
Wi-Fi: Browse the web, play streaming music, download movies, and more. If you press and hold the Wi-Fi icon, you can switch between Wi-Fi networks.
Bluetooth: Connect headphones, car kits, wireless keyboards, and other Bluetooth-enabled devices. If you press and hold the Bluetooth icon, you can switch between Bluetooth devices.
AirDrop: Share photos, videos, location data, and more with nearby Apple devices.
Tethering: Share your Internet connection with your computer or other iOS devices.

Available on iPhone and iPad (Wi-Fi Cellular).

How to press the Home button on the iPhone screen

Now, a few words about how to press the Home button using the iPhone screen. To do this, you need to click on the floating button of the “Assistive Touch” function. As a result, a menu of several items should appear on the screen. Among other things, there will be a Home button. Click on it and your iPhone will react as if you pressed a hardware button on the body of the device.

If suddenly your menu does not have a Home button, then return to iPhone Settings and open the section “General. Accessibility. Assistive Touch. Top Level Menu”.

Here you can customize which options are available in the Assistive Touch menu. To add a Home button, click on any of the available options.

And in the list that opens, select the “Home” button.

Here you can also reset the “Assistive Touch” settings or increase the number of available options.

Expanding One-Click Controls

To view other controls, press and hold the following programs and settings.

Accessibility Commands. Quickly turn on accessibility features such as AssistiveTouch, Switch Control, VoiceOver, and more.

Apple TV Remote: Control your Apple TV 4K or Apple TV HD with your iPhone, iPad, or iPod touch.

Camera: Quickly create photos and selfies, and record videos.

Flashlight: Switch the camera’s LED flash to flashlight mode. To adjust the brightness of the flashlight, press and hold its icon.

Hearing: Create and break a pair between your iPhone, iPad, or iPod touch and your hearing aids. This allows you to quickly access your hearing aids or use the Live Listen feature on your Airpods.

Home: When you set up accessories in the Home app, you can control your favorite home devices and scenarios.

Night Shift: Turns on the Night Shift feature in the brightness control card so that the display colors shift to the warmer edge of the Spectra at night.

Notes: the ability to quickly jot down ideas, create checklists, sketches, and more.

Screen Replay: Stream music, photos, and videos wirelessly to Apple TV and other AirPlay-enabled devices. If the AirPlay icon is missing, see this article for instructions.

Screen Recorder: Record what is happening on the screen with one tap. Press and hold Screen Recording, and then tap Audio Microphone to use the device’s microphone to capture audio during recording.

Timer: Adjust the time interval by dragging the slider up or down and start the timer with the Start button.

True Tone: Turns on the True Tone feature in the brightness control card so that the display colors and backlight intensity are automatically adjusted according to the ambient light level.

Wallet: Quickly access Apple Pay cards or boarding passes, movie tickets, and more.

Flashlight is only available on iPhone, iPad Pro 12.9-inch (3rd generation), iPad Pro 11-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad Pro 9. 7 inches and iPod touch. Home is available only on iPhone and iPad. True Tone is available on iPad Pro 12.9-inch (3rd generation), iPad Pro 11-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPhone X or later and iPhone 8. Wallet is available only on iPhone and iPod touch.

Probably the main nice feature introduced in iOS 11 is the redesigned Control Center, which now fits on one page and is customizable using 3D Touch (but works even on iPhone 5s and iPhone 6).

Control Center Capabilities

For example, hard clicking on a music player tile opens a new window with volume sliders, play buttons, and other controls.

Additional settings appear after a long tap on the tile with the icons for airplane mode, Wi-Fi, cellular data (finally!) And Bluetooth. in this case, you will see AirDrop and tethering settings.

As it turns out, activating and deactivating Wi-Fi and Bluetooth via Control Center now works differently and can even be confusing. In this issue, we understood this material.

When pressing forcibly on the flashlight icon, an indicator will appear, allowing the brightness of the light (4 levels).

By clicking on the Apple TV icon, owners of Apple TV boxes can use Control Center on their iPhone or iPad as a convenient remote control.

In addition, the updated Control Center allows you to record video from the iPhone or iPad screen, start the camera, as well as set a timer, start a timer and more (full list below).

Of course, Control Center is still not perfect. So, even now there is no movement of objects using drag-n-drop and full customization of icons “for yourself”. But what we have is already a very big step forward; iOS users appreciated the return to a “one-page” design and the added customization options for Control Center. Particularly pleased with the emergence of options such as power saving mode and quick access to settings for people with disabilities.

How to enable Control Panel on iPhone

The breakdown of the Home button is not a common phenomenon, however, when this happens, the user is practically deprived of the opportunity to fully use his iPhone. Indeed, without this button, it is impossible to return to the home screen, close applications, switch between running applications and perform many other operations.

The surest solution in such a situation is to contact the service center. But, there is not always time and money to repair your favorite gadget. Sometimes you need a phone right now, but it doesn’t actually work. In such a case, there is a temporary solution. You can bring the Home button to the iPhone screen and press it using the touchscreen.

You can use this method on any iPhone model that has been updated to iOS 5 or later. And these are such models as iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

Enabling network settings

Open Control Center, and then press and hold the network settings card in the upper left corner to enable the following options.

Airplane Mode: Quickly disconnect cellular connections on your iOS device.
“Cellular data”: the ability to allow or deny programs and services connecting to the Internet over a cellular network.
Wi-Fi: Browse the web, play streaming music, download movies, and more. If you press and hold the Wi-Fi icon, you can switch between Wi-Fi networks.
Bluetooth: Connect headphones, car kits, wireless keyboards, and other Bluetooth-enabled devices. If you press and hold the Bluetooth icon, you can switch between Bluetooth devices.
AirDrop: Share photos, videos, location data, and more with nearby Apple devices.
Tethering: Share your Internet connection with your computer or other iOS devices.

Available on iPhone and iPad (Wi-Fi Cellular).

Opening the Control Center program

Swipe up from the bottom of the screen. On iPhone X or later, or iPad with iOS 12 or later, swipe down from the top-right edge of the screen.

Configuring Control Center

You can customize Control Center to quickly change settings for frequently used commands. Do you want to be always ready for unexpected bursts of inspiration? Add voice recorder controls. Need to dim your dining room lights with one touch? Add controls for the Home app. To do this, follow these steps:

Go to the Settings menu Control Center.
Click Configure Element. management “.
To add a control, click the icon. To remove a control, click the icon. and then select “Delete”.

To change the order of items in Control Center, go to the Settings menu in Control Center and select Customize Items. management “. Then press and hold the icon next to the controls, then drag them to the desired places.

How to enable Home button on iPhone screen

Next, you need to open the subsection “Universal Access”.

And go to the settings of the “Assistive Touch” function.

Here, at the very top of the screen, you need to activate the switch, which is responsible for turning off and on the “Assistive Touch” function.

After enabling the “Assistive Touch” function, a floating round button should appear on the screen, which will look something like the screenshot below.

The appearance of this button means that the “Assistive Touch” function is enabled and can now be used to control the iPhone without using hardware buttons, such as the Home button.

How to enable Control Panel on iPhone

The breakdown of the Home button is not a common phenomenon, however, when this happens, the user is practically deprived of the opportunity to fully use his iPhone. Indeed, without this button, it is impossible to return to the home screen, close applications, switch between running applications and perform many other operations.

You can use this method on any iPhone model that has been updated to iOS 5 or later. And these are such models as iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

How to press the Home button on the iPhone screen

Now, a few words about how to press the Home button using the iPhone screen. To do this, you need to click on the floating button of the “Assistive Touch” function. As a result, a menu of several items should appear on the screen. Among other things, there will be a Home button. Click on it and your iPhone will react as if you pressed a hardware button on the body of the device.

If suddenly your menu does not have a Home button, then return to iPhone Settings and open the section “General. Accessibility. Assistive Touch. Top Level Menu”.

Here you can customize which options are available in the Assistive Touch menu. To add a Home button, click on any of the available options.

And in the list that opens, select the “Home” button.

Here you can also reset the “Assistive Touch” settings or increase the number of available options.

What else you can do with Assistive Touch

Assistive Touch is a feature designed primarily for people with disabilities. As already mentioned, with its help, you can display the Home button on the iPhone screen and press it without using a real hardware button on the case. But apart from this, “Assistive Touch” provides a lot of other possibilities. For example, you can use it to:

Open the list of notifications or Control Center;
Emulate the use of gestures and device shaking;
Control the sound volume;
Enable screen lock;
Turn on screen rotation or orientation lock;
Take screenshots;
Manage multitasking;
Use the camera as a magnifying glass;

With Control Center, you can quickly take pictures, turn on lights, control your Apple TV, and more. Control Center can also be customized to have instant access to frequently used functions.

Control Center Capabilities

For example, hard clicking on a music player tile opens a new window with volume sliders, play buttons, and other controls.

Additional settings appear after a long tap on the tile with the icons for airplane mode, Wi-Fi, cellular data (finally!) And Bluetooth. in this case, you will see AirDrop and tethering settings.

As it turns out, activating and deactivating Wi-Fi and Bluetooth via Control Center now works differently and can even be confusing. In this issue, we understood this material.

When pressing forcibly on the flashlight icon, an indicator will appear, allowing the brightness of the light (4 levels).

By clicking on the Apple TV icon, owners of Apple TV boxes can use Control Center on their iPhone or iPad as a convenient remote control.

In addition, the updated Control Center allows you to record video from the iPhone or iPad screen, start the camera, as well as set a timer, start a timer and more (full list below).

Replacing the “Home” button with “iPhone-5S

When the Home button on iPhone-5S is not working, non-opening fixes may not help. Then you just have to try to open the phone. But to perform this procedure, the specialist who will perform this work needs not only the appropriate tools, but also qualifications. Therefore, it is better to take the iPhone to a service center and use its services. After all, its employees have already carried out this operation more than once and know well how to repair such breakdowns.

Home button software problems

One of the reasons why the Home button on the iPhone-5S does not work. updating the operating system to iOS 10. After installing this update, it turns out that after pressing the button when turning on the phone, it does not enter the PIN-code input mode. And it feels like the button has broken.

There are two ways to solve this problem. First, get used to the fact that in iOS 10 you need to double-click a button. This is the easiest way. Secondly, you can go to the main settings of the phone, select the “Universal access” category, and in it the “Home” category and select “Apply finger”. After this operation, the phone will return to its previous reactions to your actions. But most likely, you will have to get used to such features of the operating system. It is likely that in future versions there will be no such return.

Home button on iPhone-5S not working: how to fix the problem?

Apple smartphones are not only among the most expensive gadgets in the world, but are also renowned for their reliability. Therefore, they have a lot of admirers and users, despite the high cost. Quite often you can meet users who have not yet abandoned the models of the fourth and even third series. But now let’s talk about the iPhone-5S, which was released at the end of 2013 and is a fairly new model. But nevertheless, everything done by human hands breaks down from time to time.

But do not rush to run to the service center and carry your iPhone for repair, maybe not everything is so bad. One of the most common malfunctions can be voiced like this: the Home button on the iPhone-5S does not work. What could be the causes of such a malfunction, and how to fix them?

Programmatic method for solving the problem

If the above methods did not lead to the desired result, and the question why the Home button on the iPhone-5S does not work remains open, you can use the programmatic method to solve this issue. This is a temporary measure to help you use your smartphone. It is impossible to call the option convenient, but it is better than a completely inoperative button. How to do it?

It is necessary to bring the image of the Home button to the smartphone screen. To do this, you need to go to the iPhone settings. In the settings, select the “General” tab. Then, as described earlier, go to the “Universal Access” category. Next, go to the AssistiveTouch category, after which four options for continuing the event appear on the screen, as shown in the figure above. We select the Home button. After that, on the screen of your iPhone there will be an application that simulates pressing this button. For a while, this will be the solution to your problem. However, it is not perfect, and you may be a little annoyed, but it will allow you to use the phone until you get to the service center.

Causes of the malfunction

In fact, there can be several reasons why the Home button on the iPhone-5S does not work. And they fall into three categories:

Mechanical.
Software.
Technological.

Let’s take a look at what can be attributed to mechanical failures leading to the iPhone-5S’s Home button not working. This category of malfunctions can be caused by the ingress of dust or moisture under the button itself or mechanical damage to it due to shock or excessive pressure. Most often, such issues are resolved using the service center.

Home Button Calibration

Some users of an expensive gadget have noticed that when the “Home” button on the “iPhone-5S” does not work well, its calibration helps. How to do it? Let’s figure it out.

To carry out such a procedure, you need to display any application on the iPhone screen, and then, holding down the Power button, wait for the “Turn off” slider to appear. After that, hold down and hold the “Home” button. After ten seconds, the application will close. The system will then calibrate the button. This will eliminate the system software crash associated with it.

The chemical way to solve the problem

Quite often, the reason that the Home button on the iPhone-5S stopped working is its contamination. This happens if the phone is taken with greasy hands or spilled drinks get on it, flowing under the body. A fairly effective way in this case is to use WD-40 aerosol or isopropyl alcohol, which is part of many windshield wipers. It is important to remember that the chemical must be applied to the button, not to the screen. Errors can lead to additional problems. After this application, you must repeatedly press the button and allow the liquid to fall under it. The cleaning agent will then remove grease or beverage residues and the button will function as before.

Home button repair on iPhone-5S at home

Let’s talk first about the tools needed to open a phone if the Home button on the iPhone-5S doesn’t work. The minimal set of tools looks like this:

Tweezers.
CPT scapula.
Star screwdriver for iPhone.
Phillips screwdriver.
Sucker.

First you need to unscrew the two screws next to the power connector. Then, while holding the screen with the suction cup and using the CPT spatula, detach the screen and the phone case. The disconnection operation must be carried out carefully enough so as not to damage the touch-cable of the screen. Using the CPT-spatula, unclip the touchscreen connector and raise the screen. Next, use a Phillips screwdriver to unscrew the screws securing the shield of the screen module cable, and disconnect it.

Then, from the display module, unscrew the three screws and remove the “Home” button together with its cable. She looks as shown in the photo.

After that, it is advisable to replace the broken Home button with a new one, and it is better that it be original. Of course, the copy will cost a little less, but you will have to change it more often. Then the iPhone is reassembled. In this case, it should be remembered that the screws must be screwed in exactly the places from where they were unscrewed.

Customizing the AssistiveTouch Menu

Yesterday we learned what the virtual Home button on the iPhone screen is, that in the settings it is called AssistiveTouch and learned how to enable and disable it. When pressed, the virtual button on the screen turns into a menu with 6 buttons, some of them contain a number of other functions, for example, the Device button.

Such a number of buttons and subsections in this menu is not convenient for everyone, so we decided to configure AssistiveTouch and create our own menu for the iPhone’s on-screen virtual button, leaving only the necessary elements. We will form several options, one of which you can choose for yourself. For those who do not like the menu options, you can create your own.

Where to customize the AssistiveTouch on-screen button

The first thing we will do is set the transparency of the virtual button itself, which is constantly located on the screen in idle mode. If it is an eyesore, then we will make it more transparent, if, on the contrary, the user has a vision problem, then the transparency in standby mode can be turned off and the virtual button will be clearly visible on the iPhone screen, as if in a touch state.

The degree of transparency, like other AssistiveTouch settings, can be found here:

Launch the Settings app, go to General, then Accessibility and AssistiveTouch. Here we select. Opacity at rest, and set the degree of transparency of the virtual Home button.

Only Home. Broken home button

If the physical Home button does not work on the iPhone, without 3D-Touch support, then some users configure the virtual button on the screen in such a way that when it is pressed, the menu does not open, but simply the usual pressing of the usual Home button is triggered, for this they make the following setting:

In the settings of AssistiveTouch actions go to the section. One touch.
And they choose. Home

Now you do not need to make unnecessary movements by pressing the virtual button, the usual pressing of the Home button works, without displaying the AssistiveTouch menu. The function will be relevant for users of the new iPhone X, who in no way can wean themselves from the button!

But if in the menu with the AssistiveTouch settings in your iPhone model there is a subsection. 3D Touch, and this option is enabled, then it is enough to press down the virtual button a little and it will also work, but this is not very convenient, since the virtual 3D Touch Home does not work when double clicked to call, for example, the multitasking panel.

AssistiveTouch menu if the Power button is broken

If the iPhone on / off button breaks down, you can customize your special menu, which will appear when you press the virtual Home button located on the phone screen.

You can see an example on the screenshot below. Our menu consists of 4 buttons, each with a virtual Power button press. If you want to make a similar menu in your iPhone, then we perform several actions:

In the AssistiveTouch settings (who have already forgotten where they are, see the text above, where we adjusted the transparency of the button), select. Top-level menu
In the page that opens, using the minus sign (-), we leave only 4 icons
Now we touch each icon and set our commands for them: Lock Screen, Restart, SOS, Screenshot.
After applying the command to each button, do not forget to press the button. Done, located in the upper right corner.

Now check, press the Home button, which should show our 4 buttons, each of which can help when the power button is not working, it is also the screen lock.

Virtual Home menu when volume buttons are not working

If the volume buttons are junk or do not function, then you can make a 3-button virtual menu that will help you adjust the sound volume:

Using the AssistiveTouch settings that we did above, you need to arrange the menu with the volume buttons and they will appear in your menu.

In general, you can customize any combination of virtual buttons for yourself and use them in the iPhone for convenience.

Sources:

http://mirinfo.ru/ios/diktofon-na-ayfone.html
http://4systems.ru/inf/kak-vkljuchit-panel-upravlenija-na-ajfone/
http://rg-gaming.ru/kompjutery/kak-vkljuchit-panel-upravlenija-na-ajfone
http://fb.ru/article/279701/knopka-domoy-na-ayfones-ne-rabotaet-kak-ustranit-problemu
http://ibobr.ru/manual/nastrojka-assistivetouch.html