Airdrop on iPhone: enable and transfer files

All iPhones have a special Airdrop function for transferring files to other iOS smartphone users. What is it for and how to use it is described in this article.

Gadgets are not displayed on the screen

If you need to transfer information from your phone to your computer and vice versa, then first try restarting both devices. If this method does not work, follow all the following recommendations. A common cause of failures lies in a Bluetooth connection that is not automatically configured. In this case, you need to configure it yourself. First, turn on Bluetooth on your Mac and iPhone. On your computer, open System Settings, then go to the Bluetooth section by starting a search for devices within a meter radius. Find the iPhone you want and enter the code that displays on your Mac. After that, try again to transfer files via Airdrop.

Control point

Step-by-step instructions for activating data transfer via Aidrop on iPhone:

  • Open the control point by pulling up from the bottom of the screen.
  • Pinch the area of ​​the window with your finger between the “WI-FI” and “Bluetooth” buttons.
    enable, airdrop, iphone
  • A window with additional functions will open.
  • Click on the “Airdrop” button, thereby activating it.

If the icon is missing

The most common reason for this “breakdown” is a new phone. When buying an iPhone, the function may simply not be activated. You can enable Airdrop through the phone settings. There go to “General”, then to “Restrictions”. A small list of functions that can be activated will appear. Opposite the Airdrop, activate the special toggle switch by swiping to the right.

After that, check for the icon in the control center. If the function still does not appear, just restart the device. Airdrop will now work as expected.

How to AirDrop File to Mac? (Photo, music, video)

Transferring file from phone to Apple computer is as easy as it is from iPhone to iPhone. The phone display must be constantly on during the process.

  • Enable Airdrop on both devices. Open the “Finder” section on your computer, then turn on WI-FI and Bluetooth, and then activate Aidrop, which is in the list on the right.
  • On your computer, select the file you want to share.
  • Right-click on it. Then select “Share via AirDrop”.
  • Click on the desired user in the list.

Charger problems

Often the reason that the iPhone sat down and does not turn on while charging is a faulty cable. At the junction of the wire and the adapter, users find creases. No electricity is supplied to the device, so a discharged phone will not turn on. It is worth carefully examining the charging. this will allow you to detect a breakdown in time.

Connect the iPhone to another charger. if the phone turns on, the cable will have to be replaced, sometimes the breakage cannot be detected with the naked eye. Also, the reason may lie in a faulty outlet, so you should not panic ahead of time. A banal solution to a problem often turns out to be the right way.

iPhone is dead and won’t turn on while charging. what to do

The smartphones of the “apple” manufacturer, although they differ in the quality of workmanship, but the technology deteriorates over time. Therefore, users find that the iPhone is dead and won’t turn on while charging. Smartphone owners panic. it is expensive to repair Apple products, even if the model has been on the market for a long time. The list of possible causes of breakdown is not limited to a banal fall or falling into water, so you need to carefully examine the phone. In some cases, it is possible to correct the situation on our own, and in this article we will consider how to turn on the iPhone if it is completely discharged and stops giving “signs of life”.

Hard reset

If your iPhone is completely discharged and won’t turn on after an incorrect update or firmware, a hard reset will fix the problem. For this you need:

  • hold down the “Power” and “Home” keys;
  • wait for the Apple logo to appear;
  • the phone will reboot and turn on.

This method will help if older models, including “seven”, “six”, “five” or iPhone 5S, will not turn on or charge after being discharged. Hard reset of new models occurs differently, this is done to protect user information from accidental clicks.

  • Quickly press the volume up key.
  • Press the volume down key quickly.
  • Hold the side button until the “apple” logo appears.

How to Use AirDrop to Send or Receive Files On iPhone, iPad, iPod or Mac Instantly

After the performed manipulations, the smartphone will turn on.

Smartphone malfunctions

Users complain that after being completely discharged, the iPhone will not turn on due to being dropped or submerged in water. Only a technician in a service center can reliably find out why a smartphone does not want to work. The reason lies in the breakdown of the battery, cables, display, motherboard or processor. the technique requires careful handling. The experts warn that it is better not to look inside the device unnecessarily, so as not to break the iPhone. And simple tips will help to avoid breakdowns:

  • do not discharge the phone to zero;
  • let your smartphone “rest”;
  • update iPhone only using official programs and firmware;
  • charge the device with specialized chargers.

Follow these rules, and then the iPhone will work for a long time without errors. And remember that smartphones also have an operational life, and old equipment fails due to age.

Auto dialer on iPhone. is there one and how to enable it? All the truth!

Hey! Why does the title of the article contain the phrase “the whole truth”? Everything is very simple. while preparing this article, I read the instructions on other sites a little and, you know, this is some kind of kapets. Some Internet resources write such “game” that you simply wonder.

Yes, not everyone is guilty of this (there are also normal texts), but in most cases a typical instruction about auto-dialing on an iPhone looks very strange.

The scheme, as a rule, is as follows. Firstly, it says that autorepeat is a very useful thing (half of the article). Secondly, some unknown settings on the iPhone are called, in which you can supposedly enable auto-dialing (second half of the article).

I would like to ask the authors. did you even hold an iPhone in your hands? For me, if you write something about the iPhone, then:

  • At least this very iPhone should appear sometimes.
  • As a maximum, you need constant and free access to it.
  • Ideally, you should always have it.

Wow, I spoke out. Sorry, it’s boiling 🙂 Now let’s get down to business.

So, the most important thing to remember for everyone who wants to find the “Auto Redial” feature on their iPhone:

At the moment, there is no such function in the iPhone.

Not at all. Absolutely. Even if you search well. Even if you go through the whole menu. On any firmware. And on iOS 14 too. There is no auto-dialing (in the classic sense of this function) on the iPhone. Point.

Therefore, if you were looking for an answer to the question “How to enable auto redial on iPhone”, then here is the answer. “Nothing.” You can skip reading the article 🙂

We continue to destroy the “Internet” myths. Many people write that you can get an auto-dial:

  • Using the settings. Here we have already figured out. there is no and never was such a setting in the iPhone.
  • By jailbreak. And here is finally the truth. If your iPhone is jailbroken (jailbroken), then remove it immediately, there is such a tweak. KuaiDial. With its help, you can add additional functions (Auto redial is present) to the standard “dialer”. Another thing is that jailbreak is now “rather dead than alive” and it is very difficult to find an iPhone with a jail.
  • Using programs from the App Store. There are no such programs.

As you can see, everything is very, very sad. Well, Apple does not want to give us the ability to automatically call. such a greedy company 🙂

The only way to “do” at least some kind of “auto redial” function on the iPhone is to use Siri.

  • We say “Hey Siri. Call again “- the call to the last number you dialed starts.
  • We say “Hey Siri. Call back “- the last number that called you is dialed.

Of course, do not forget to turn on the voice assistant in “Settings. Siri and Search” and activate the “Listen Hey Siri” function. It will be much more convenient this way.

Here is such an automatic call with manual voice control 🙂

There are no other options at the moment. Will there be any progress in new versions of iOS? Perhaps only Tim Cook and a couple of other people know this. Unfortunately, yours truly is not one of them. Consequently, he, like you, is in the dark, blindly waiting for the function “call back automatically” and hopes for its early appearance. True, I am afraid that it will take a very long time to wait

Using the Loupe function

To use the function in question after calling it, aim the camera lens at the object that you want to look closer. Magnifier provides the following options for working with images:

Zooming To zoom in or out on an object in the frame, slide from left to right or from right to left, respectively, along the zoom bar located at the bottom of the camera interface. A similar result can be achieved by swiping your finger from the bottom up over the area with the image to enlarge or in the opposite direction to reduce. Flash If you have to use the Magnifier in a dimly lit room or on a dark object, you can activate the flash. just tap the corresponding button on the screen. Saving a frame You can use a virtual magnifying glass not only in real time, but also on static frames, which, moreover, can be saved separately. As a result, you will get a virtually ordinary photo, but with pre-set zoom and focus parameters. For this:

If necessary, change the scaling of the image in the frame by increasing or decreasing it.

Tap the screen to focus on a specific area of ​​the image.

To save, hold down your finger on the frame, and then select the “Save Image” item in the menu that appears.

Locking focus If you enlarge the subject in the frame, but at the same time want to maintain focus on it, press the button designed as a lock. Press again to release the freeze frame. Light filters One of the possible applications of the “Magnifier” is to enlarge the text, the initial readability of which may “suffer” for one reason or another. This can be corrected by applying light filters.

    Tap on the filter button (located on the right).

Check out the list of available filters and choose the one that suits your case.

To adjust brightness and contrast, move the sliders marked in the screenshot below.

If you want to apply inverse filtering to the image, touch the corresponding button, and then adjust the parameters.

To apply the selected light filter, press the button to call this function. This action will also return you to the main Magnifier screen.

Closing Magnifier To exit this feature, depending on your iPhone model, do one of the following:

  • Press the Home button (iPhone 8 and earlier);
  • Swipe up from the bottom of the screen (iPhone X and newer).

IPhone Magnifier

The function in question is not the main one, and therefore, like many others, it is hidden in the accessibility settings. To use it, do the following:

    Open “Settings” and go to the section “Accessibility”.

Note: On devices with iOS 12 and below, this item is located in the “General” section.

Tap on the item “Magnifier”, if you wish, read a brief description of how this function works, and turn the switch opposite to this name to the active position.

  • In order to call the “Magnifier” after its activation, do one of the following:
  • Press the “Home” button three times on those iPhone models where it is;
  • Triple-tap the screen lock (on / off) button on an iPhone without a physical button (X models and newer).
  • This will open a somewhat simplified camera interface, the controls of which we will look at separately later.

    Turn on the Loupe feature on iPhone

    “Magnifier” is one of the non-obvious, but very useful functions of the iPhone, thanks to which its camera can be used to magnify surrounding objects, and this is possible both in real time and after the fact. We will tell you how to activate it and apply it in practice.

    Adding a Magnifier Button to a Control Center

    If you often have to access the function in question, and you find it inconvenient to press a physical button three times to call it, you can add a call button to the control center (CP).

      In iPhone Settings, go to Control Center.

    Move to the active position the switch “Access in applications” if it was previously disabled and / or if you want to have access to the control panel on any screen. Then tap on the item “Customize controls”.

    Scroll down the list of available options, find the “Magnifier” there and tap the green plus sign located to the left of this name.

    The “magnifier” will be added to the list of the main elements of the control unit, which can be seen if you return to its beginning (scroll up). Here you can also define a more convenient location of the function call button. to do this, simply hold down the three horizontal stripes on the right and move the item to the desired location.

    Now you can call the “Magnifier” directly from the control point. just swipe up from the bottom of the screen and tap the corresponding button.

    Now you know how to turn on the “Magnifier” on the iPhone and use it to enlarge objects in the frame, as well as change, improve their display on the screen.

    How to find voice recorder on iPhone or iPad

    All applications on the desktops of Apple devices are mobile. They can be moved to any folder, which often makes it difficult to find the icon. There are three ways to find the app you want:

    • self-detect on the desktop;
    • use the search (swipe the screen from top to bottom and enter the name of the desired application in the search box that appears);
    • ask the mobile assistant Siri to open the required program.

    A little advice on how to keep the recorder always at hand, so as not to lose it or be able to use it even when the screen is locked. add the application to the control point that appears when you swipe up the screen for models with the Home button (5 and 6 S, SE, 6) or down if the iPhone has a bezel-less screen (starting with iPhone 7).

    If you take the recorder to the control center, you can turn it on when the screen is locked

    For your information! The developer of the iPhone photo editing application M. Rundle noticed that the sound wave on the voice recorder icon was not accidental. It displays a record of the word Apple, which can be easily verified using the same application. Such attention to detail is a definite plus, as it inspires confidence.

    How to trim voice recorder recording on iPhone and iPad

    After creating an audio recording, you can edit it. To see all the available editing options, you need to go into the application, select the file, and then click on the button in the lower left corner of the record field, indicated by three blue dots. After clicking, a menu of three tabs will appear:

    • edit the entry;
    • duplicate;
    • to share.

    By selecting the “Edit Recording” tab on the iPhone, and “Edit” on the iPad, a black working screen with a red “Replace” button at the bottom of the field, a sound track in the center and a blue square above it will appear. After clicking on the square, another screen will appear with two audio tracks. The top track has two yellow sliders at the beginning and end of the recording. The lower one is enclosed in a yellow frame with direction arrows (oscillogram overview). What you need to do to trim an audio recording:

    • Determine the boundaries of the beginning and end of the desired segment by dragging either the sliders on the top track, or the arrows on the bottom.
    • Listen to the selected area to make sure the boundaries are correctly defined.
    • Press the “Trim” button to remove unnecessary areas and save the desired fragment or “Delete” to erase the selected area.
    • To complete editing, click “Save” and “Finish”.

    The yellow sliders and direction arrows are initially located at the beginning and end of the audio recording. If you need to trim an audio file only on one side, then it is enough to use one slider or a directional arrow.

    Note! After executing the “Save” command, you cannot change actions or undo editing. To be able to return to the source as a backup, you need to use the “Duplicate” command to create a copy.

    How to enable voice recorder on iPhone and iPad

    How to enable voice recorder or how to record audio on iPhone? After starting the application, a working screen appears on a white background with existing entries. At the bottom of the screen there is a black strip with a red touch button, which repeats the “Home” button in size and appearance.

    After pressing the button to start recording, the inscription “New recording”, a time sensor and an audio track will appear in a black frame. During the operation of the recorder, one working button will remain, which is a circle with a red square in it. In this mode, you can only start recording and end it by pressing the red button.

    How to Turn on AirDrop on iPhone/ iPad! �� [100% WORKS!!]

    Important! The mode is suitable for recording short information or for saving recorded data as separate files.

    If you need a selective recording, but save it in one document, you need to expand the black working screen. The Pause and Resume buttons appear. In the pause mode, you can listen to the recorded information. While recording, you can work with other smartphone applications by pressing the Home button. The voice recorder will continue to record in the background.

    To record a phone call from an iPhone, a dedicated app or device is required

    Note! Only information from external media can be recorded on iPhone, iPad. If it becomes necessary to record a telephone conversation, Apple’s technology will not help with this. This option is not available in the basic configuration. This can be done only through additionally installed applications. The company takes the privacy of personal information very seriously.

    How to set up voice recorder on iPhone

    The function of creating audio recordings has been available since the days of the iOS 3.0 operating system. The first voice recorder had limited capabilities:

    • creation of monochrome audio recording;
    • listening;
    • file storage and deletion.

    In this form, it existed for a long time. Voice Recorder iOS 12.0 and later is a true audio editor that allows you to:

    • create a record;
    • edit (trim, duplicate an existing record);
    • share by sending to e-mail, social networks, instant messengers or save to the “Files” folder;
    • adjust the sound quality;
    • set the frequency of cleaning deleted files;
    • customize geo-contextual names of audio files.

    It doesn’t take long to set up the voice recorder. There are some small subtleties in the updated version of the application. In particular, in the voice recorder settings, the Siri and Search tab contains the Quick Commands function to make the program easier to use. The function makes it possible to control the recorder using voice commands. You can use the requests offered by mobile assistants by clicking on the icon. or set your own, saving them for Siri.

    Using the “Clean up Deleted Data” tab, you can set the optimal period for permanently deleting files that have already been placed in the trash.

    Note! For the scrupulous, the item “Never” has been added, which includes the eternal storage of deleted audio recordings. However, keep in mind that unused files will clog your phone or tablet memory.

    When you select “Never”, all deleted files will be stored forever in the “Recently Deleted” folder

    The “Geo-contextual names” function has appeared in the settings, after activating which new audio recordings will be automatically named with the address where the recording was made. However, when geolocation is turned off, the function is useless and the files will still be saved as a “New entry” with a sequential number. Both in the first and in the second case, the file name can be changed manually.

    One of the most important tabs in the recorder settings is “Sound quality”, which contains two items “Compressed” and “Lossless”. The recorded voice information in a compressed form will have less weight, which means it will not take up much space in the phone’s memory. When choosing the second option, the sound quality will be much better, but the weight of such a file, accordingly, will be much larger. This mode is more useful for professionals or in the case when recording is carried out in difficult conditions (extraneous noise, poor sound). For domestic use, the “Compressed” mode is quite enough.

    When the geo-contextual names of the record are enabled, the address where the file was created will be automatically assigned as the name

    For your information! To adjust the volume, you need to move the device closer or further away from the sound source. If it is not possible to bring the device closer, you can connect an external microphone, with which the recorded voice will be more clear.

    Where is the voice recorder on the iPhone?

    Finding where the voice recorder is located on an iPhone or iPad is not difficult. As one of the basic features, the application is located on one of the device’s desktops and is indicated by a special icon. The appearance of the icon, depending on the version of the iOS operating system, may have slight differences.

    The iPhone voice recorder can be compared to a full-fledged sound editor

    For your information! The pre-iOS 12.0 icon depicts a black recording wave on a white background. Subsequent versions show a red and white waveform with a blue slider on a black background.

    Before iOS 12, the voice recorder icon was white

    American developers of apple devices are trying to ensure the maximum comfort of using devices, therefore all available applications are signed.

    Voice recorder on iPhone. where is it, how to set it up

    Apple devices can be compared to a full-fledged computer, photo and sound studio. A dictaphone in apple devices is a basic function that allows you to record, store, modify and transfer sound recordings.

    How to enable 4G and LTE on iPhone

    The majority of iPhone users use mobile internet on a daily basis, the standards of which are constantly rising. The most advanced and advanced technology is 4G, which is also called LTE. Its user gets the speed higher than in the case of 3G, but it is important to figure out how to enable LTE on the iPhone 7.

    Often, the new generation Internet is activated in a smartphone automatically when it is in this network. How to enable 4G on iPhone 5s. many ask, and all because not everyone is tech-savvy. Therefore, in the question of how to forcibly turn on 4G on the iPhone, we will figure it out thoroughly.

    Which iPhones support 4G

    Not every iPhone has built-in support for new networks, for example, in the iPhone 4S and below, this technology is no longer there. Therefore, even with the appropriate SIM card, the maximum that the owner of the phone can count on is 3G.

    In the case of iPhones, LTE support starts from the iPhone 5, and the highest data transfer rate depends on the smartphone generation:

    • iPhone 5, 5s. up to 100 Mbps;
    • SE, 6 and Plus version. 150 Mbps;
    • 6s and larger version Plus. 300 Mbps;
    • 7th model and “plus” format. 450 Mbps;
    • iPhone 8 (including Plus size) and smartphones X and XR. 600 Mbps;
    • The XS and Max versions hold the record for bandwidth, as they provide Internet access up to the maximum network performance. 1 Gbps.

    It should be borne in mind that the specified speed can be much lower, which depends on the quality of coverage, the number of subscribers at base stations and their distance from the user. If a subscriber whose smartphone supports LTE is in an area where such technology is not yet available, he will not be left without the Internet.

    The fourth generation modules also support downstream networks, so 3G networks and even EDGE will be included. Therefore, you do not have to think about how to enable LTE on the iPhone 5S, and where to find coverage, since you can continue to use a less comfortable, but still fast 3G connection.

    What is 4G and LTE

    To put it simply, 4G is a fourth-generation mobile network with improved data rates. The minimum indicator of the Internet speed of the network of this standard is 100 Mbit / s, while for stationary subscribers, which include those moving at a speed of less than 10 kilometers per hour, the minimum speed will be 1 Gbit per second.

    When comparing 4G with the previous generation of 3G mobile networks, the speed increased more than 50 times, since the outdated technology for stationary subscribers only gave out 2 Mbps. But, in addition to 4G, you can often hear the name LTE, and for some mobile users this abbreviation is displayed when the mobile Internet is turned on.

    The fact is that 4G networks consist of two data transmission standards:

    • LTE. used for portable devices such as telephones;
    • WiMAX. for stationary equipment.

    How to enable LTE on iPhone 5. sometimes it becomes a problem. The fact is that this phone works in unpopular bands and gives access to high-speed networks only if the operator has taken care of it.

    As a result, it turns out that it is impossible to separate LTE from 4G, since this is a component of the fourth generation Internet. The use of 4G networks in smartphones speeds up battery discharge, as it requires more power to operate the module. Nevertheless, the question of how to enable LTE on the iPhone 8 remains urgent.

    How to enable and configure LTE

    We figured out what the 4G Internet is, now we need to understand how to turn on 4 Gs on the iPhone. First of all, not only a smartphone with 4G support is bought, but also a SIM card that gives access to the technology. It must be marked accordingly. Next, you should insert a SIM card into the device and you can turn on the mobile Internet.

    • Go to the “Cellular” section.
    • In the item “Cellular data” you need to move the slider to the right.

    This instruction is universal, because the interface is the same on all Apple devices. If you do not know how to enable 4G on iPhone SE. this guide will help you.

    If as a result of these actions LTE did not turn on, then you need to figure out how to turn on the Internet on the iPhone manually.

    How to enable LTE on iPhone 5 is divided into stages:

    • Opening the settings.
    • Go to the “Cellular” section.
    • Opening the “Data Options”.
    • Select the item “Enable LTE”.
    • Next, you should choose one of two options:
    • “Voice and data”. transfer of not only data, but also voice calls over the LTE network;
    • Data only. only data transmission is possible via LTE.

    If the phone displays a warning about the lack of operator certification, press the LTE power button again. On this LTE is forcibly turned on and high-speed mobile Internet appears.

    What are the LTE frequencies of operators in Russia

    Russian operators are currently using different frequency bands to provide 4G Internet to subscribers. Among the topical ones are:

    • b3. from 1805 to 1880 MHz;
    • b7. 2620-2690 MHz;
    • b20. range 791-821;
    • b31. one frequency 450 MHz is used;
    • b38. 2570-2620 Megahertz.

    Each operator uses his own frequency, which is reserved for him. But there are also cases when frequencies are used by two operators, usually in less developed regions. But the question of how to enable 4G on the iPhone 5s does not become more difficult, because the task of fine-tuning the frequencies is the operator’s concern.

    How to turn off geolocation on iPhone?

    The user meets a request to activate geolocation during the initial setup of the iPhone and, as a rule, unknowingly confirms it. Therefore, the question of disabling geolocation is more pressing than enabling it. You need to deactivate the function like this:

    In the “Settings” find the “Privacy” section (on some versions of iOS. “Privacy”) and go to it.

    Go to the subsection “Geolocation Services”. it goes first in the list.

    Toggle the toggle switch “Location Services” to the inactive position.

    Confirm your intention to deactivate geolocation. click “Disable”.

    Please note that the iPhone has a flexible setting: you can allow some applications to use geolocation, others. prohibit. To do this, you need to adjust the sliders located in the block below.

    For example, with the configuration as in the figure, you can use navigation, but geotags will not be attached to your photos.

    With flexible configuration, the main toggle switch “Geolocation Services” must be turned on.

    How to enable geolocation on iPhone?

    The algorithm for how to turn on geolocation on the iPhone differs only slightly from the method described above for turning off. The user also needs to follow the path “Settings”. “Privacy”. “Geolocation Services”. In the last section, he will see that there is only one slider (main), and there is no list of applications using geolocation.

    It is necessary to activate the toggle switch, then disconnect from geolocation those applications that do not really need this function.

    Geolocation and GPS are one and the same?

    However, in order for geolocation to be available, it is not at all necessary to turn on GPS. other methods of calculating positional data are possible:

      Via bluetooth. The location of the object is determined using special Beacon beacons, which are located in public buildings. airports, hypermarkets. In terms of accuracy, this technology is inferior to GPS, because it provides a reliable result only if the object is stationary. Based on mobile stations. The smartphone knows from which station the GSM signal is sent to it and where this station is located. Therefore, using a special application containing a database of stations, you can use geolocation without GPS. Using this method, reliable results can be achieved in megalopolises where the network coverage is high, but in small cities it is problematic to determine geolocation through stations. Based on the Earth’s geomagnetic field. Navigation based on the planet’s geomagnetic field is the idea of ​​Saratov scientists. Each point on the Earth has a unique set of characteristics by which it is possible to determine the location of an object (including the iPhone). The technology is still being tested, but already now it is being given big advances.

    Despite the fact that geolocation and GPS are different concepts, and there are several ways to calculate positional data, at the moment it is possible to accurately determine the location of an object only through GPS.

    Do I need to disable geolocation of system services?

    The subsection “System services” is located at the very bottom of the block with a list of applications that need geolocation.

    A user who visits this subsection will see the following:

    Before deciding whether to disable geolocation for system services, you should figure out what functions are designed to perform at least some of them.

      Geolocation iAd. iPhone sends information to Apple about where and how fast the user is going. This is necessary so that the owner of the gadget can receive only those advertising offers that are relevant to him from a geographic point of view. Popular nearby. The iPhone periodically shares information with Apple about the places where the user made purchases. The information is anonymous and is required solely for statistical purposes. Traffic jams. iPhone sends GPS coordinates and speed information to Apple. This is necessary to replenish the traffic database.

    The listed system services are common to most versions of iOS. There is no need to describe all the services. and it is clear that their main purpose is to collect sensitive data about consumer preferences and send information to Apple. People who claim that Americans are spying on Russians through smartphones are not that far from the truth.

    If you do not want Apple, tracking your movements and purchases, to replenish its statistical databases, switch the toggle switches in the “System Services” section to the inactive position. It is recommended to do this for all Yabloko users: there is no benefit to the iPhone owner from services, but the charge is consumed faster because of them.

    How to enable / disable geolocation on iPhone?

    Geolocation is the process of locating the location of the iPhone. Unfortunately, it is customary to underestimate the importance of geolocation, despite the fact that without it you will not be able to use the navigator, attach geotags to a photo, or find an iPhone using the function of the same name. Users are more aware of the negative characteristic of geolocation. “gluttony”: by disabling the function, you can significantly increase the battery life of the gadget.

    Fortunately, the procedure for activating / deactivating geolocation is quite simple. you can turn it on while using the navigator, and keep it off the rest of the time.

    What to do if geolocation doesn’t work?

    If geolocation does not work, it is hardly a matter of mechanical failure of any part of the iPhone (for example, the GPS module). Most likely, the problem lies at the software level. What to do if a function refuses to function?

    Go to the “Geolocation Services” section and make sure that geolocation is activated for a specific application.

    Check if the Internet is turned on on the iPhone. The network makes it possible to more accurately position the device. Go to the “Cellular” section of the settings and make sure that the “Cellular data” slider is in the active position.

    If the above steps do not work, reset the settings after creating a backup copy (instructions for creating copies are located here). Follow the path “Settings”. “General”. “Reset” and select “Erase content and settings”.

    Doing so will erase all data from the iPhone.

    You need to check if geolocation works on a “clean” smartphone, that is, before restoring from a backup. If the function still does not work, you should contact the service.

    How to pair Mac and iPhone?

    • Connect your device to your computer using a USB cable, then open iTunes and select your device.
    • Click Browse on the left side of the iTunes window.
    • Select “Sync with this [device] over Wi-Fi”.
    • Click the Apply button.

    How to enable Airdrop on iPhone 11?

    • Pull out the Control Center with a swipe. Pay attention to the section with Wi-Fi, Bluetooth, etc.
    • Press harder on this window If you do not have 3D Touch, then just hold down the window.
    • Open Settings. General. AirDrop.
    • Choose Only contacts or Everyone.

    How to use Airdrop?

    To initiate data transfer via AirDrop, the initiator’s phone sends a broadcast BLE packet, which contains hashed information about the iCloud account and the phone number of the owner of the initiator’s devices, with a proposal to establish a connection via AWDL (Apple Wireless Direct Link) protocol, something

    Why AirDrop isn’t working?

    If you are faced with the fact that AirDrop does not see the iPhone, you need to check the settings of the smartphone. Disable tethering if enabled on your device. Go to the “Settings” window. “Modem mode” and deactivate the slider.

    How to enable Handoff on older Macs?

    Mac: Preferences. Basic. Allow Handoff between this Mac and your iCloud devices (check the box).

    How to set up AirDrop on Mac?

    Select AirDrop from the sidebar of the Finder window. Or choose Go to AirDrop from the menu bar. The AirDrop window displays nearby AirDrop users. Drag and drop documents, photos, or other files onto the recipient’s icon displayed in this window.

    How to restart or shutdown iPhone 11, X and XS. All ways

    After buying a new iPhone 11 or iPhone 11 Pro, many users are wondering how to turn off or restart this smartphone. This information will be especially relevant for those who purchase an Apple smartphone for the first time or switch from an iPhone 8 or older devices.

    The methods for rebooting and shutting down these models are slightly different.

    How to turn off iPhone 11

    Holding down the power button on iPhone X and newer devices, which is common on previous models, does not bring up the shutdown menu. Instead, the Siri voice assistant will be activated.

    If you turn off Siri or turn off activation by pressing the side button, then a long press on it will not work at all. You need to turn off your iPhone in one of the following ways:

    Shutdown via settings

    The shutdown button for this case has long been hidden in the bowels of the system.

    Go to Settings. General and at the very bottom of the page we see the Disable button. After pressing, the usual slider appears, one swipe and the smartphone turns off.

    When it helps: when you need to turn off your smartphone for a while so that it does not lose battery power.

    Switching off via the emergency call menu

    Holding down the power button and any of the volume keys on an iPhone with Face ID brings up the emergency call menu. So you can call the rescue service without unlocking your smartphone, look at the owner’s medical record and, of course, restart your iPhone.

    When it helps: when to turn off iPhone even without entering an unlock password or face scan.

    How to restart iPhone 11

    There are three ways to reboot at once:

    Switching off and on

    Just hold down any volume button paired with the side button on the opposite side of the smartphone until the shutdown slider appears, move the slider and wait for the iPhone to turn off. After disconnecting, press the power button to re-enable.

    When it helps: this method will come in handy if the iPhone starts to glitch, some application does not start, or Bluetooth headphones do not connect. The first and most effective remedy for such failures is to turn off and then turn on the smartphone.

    Such a reset also helps to get rid of all sorts of glitches and problems with the iPhone. It can be performed both on a working smartphone and when it freezes.

    If the gadget is not responding or you just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.

    When it helps: This is the only way that helps when iPhone freezes. You can use it to combat glitches and system malfunctions.

    Dedicated button for reboot

    Using the AssistiveTouch menu, you can create a virtual button to restart your smartphone.

    Go to Settings. Accessibility. Touch. AssistiveTouch and activate the main switch. Now add the Restart button to the menu.

    You can add it to the top-level menu, set restart on a long press or double tap.

    When it helps: this feature is convenient to use if you want to operate your smartphone with one hand. Add volume control buttons, shutdown buttons and others to this menu, after which you can perform manipulations without pressing physical keys.

    AirDrop not working: what is the reason?

    AirDrop is still a fairly crude technology, so it is common to experience crashes. Among Apple users, the two most common complaints about AirDrop are:

    The first problem will probably be solved by one of the following recommendations:

    Reboot both devices. It is recommended to reboot before each AirDrop transfer.

    Check if so-called Bluetooth pairs (Bluetooth Wi-Fi) are activated on both devices. To do this, just open the “Control Center” with a swipe from bottom to top and see if the Wi-Fi and Bluetooth icons are darkened.

    If both icons are white, it means that the cause of the malfunction lies not in the Bluetooth pair.

    Check if the “Handoff” and “Continuity” functions are activated. Both functions actually serve to combine several Apple devices: an activated “Handoff” option, for example, allows the user to continue reading an article on the Internet on a Mac from where he left off when reading from his iPhone. To activate “Handoff” you need to go along the path “Settings”. “Basic”. “Handoff and the proposed software” and activate the toggle switch opposite to “Handoff”. On some versions of iOS 8, this feature is right in the “General”.

    To activate “Continuity”, go to the “Face Time” settings and move the “iPhone Cellular Calls” slider.

    The “Continuity” and “Handoff” functions are present on iOS version 8 and higher. Searching for them is pointless on iOS 7.

    If you encounter problems transferring data from iPhone to Mac, you need to check the Bluetooth version of your computer. HCI version must be at least 0x6, otherwise you cannot do without replacing the module.

    Can’t transfer files via AirDrop to Windows PC!

    To solve the second problem (there is no AirDrop icon), you have to delve into the gadget’s settings:

    Follow the path “Settings”. “General”. “Restrictions”.

    Enter restrictions password.

    In the “Allow” block, activate the AirDrop toggle switch.

    iPhone 7 and 8: How To Air Drop With iOS 11 and The New Control Center.

    As soon as you complete these operations, the AirDrop icon will appear in the “Control Center”.

    How to use AirDrop on iPhone?

    The AirDrop function is an iOS 7 innovation designed to facilitate the exchange of information and content between owners of Apple gadgets. The procedure for using AirDrop itself is similar to the transfer of information via Bluetooth or via NFC technology, which is actively integrated into devices with the Android operating system.

    The main advantage of sharing data via AirDrop is that there is no need to connect your smartphone to the 3G Internet. you don’t have to worry about the connection being too slow to send a file.

    How to enable AirDrop?

    Users trying to find AirDrop in the “Settings” of the iPhone are too “tricky”: this function is activated through the “Control Center”, which can be called up by swiping from the bottom up. The AirDrop icon is located just below the volume slider of the music player.

    To enable AirDrop, click on the icon. A menu will appear offering three modes:

      “Off”. to completely deactivate the function. “Contacts Only”. only those people whose numbers are present in the phone book will be able to send files to the device. This item is selected by default. Everyone. iPhone will accept files from all AirDrop-enabled devices.

    It is recommended to select “For everyone”. then you will be sure that you will receive the file. However, if you are in a public place, this mode is not the most suitable.

    After you select the desired mode, the AirDrop icon changes from gray to white. At the same time, the Bluetooth and Wi-Fi modules will be activated.

    You need to enable AirDrop on all devices between which data is exchanged.

    What AirDrop is and how it works?

    Apple is positioning AirDrop as the easiest and most configuration-free way to send a file from one Apple device to another. This communication technology uses the iPhone’s Bluetooth and Wi-Fi module at the same time to form a peer-to-peer network. Within this network, files are transmitted in encrypted form, so this method of exchanging information is also safe.

    AirDrop sharing requires compliance with the following conditions:

    There is no need to search for an available Wi-Fi network and connect devices to it.

    The list of files that can be sent is limited; for example, you cannot transfer music and ringtones via AirDrop. The function allows you to share the contents of the built-in applications “Contacts”, “Photos”, “Maps”, the Safari browser.

    Not all Apple devices can use AirDrop. only the following:

    Even if iOS 7 is installed on the iPhone 4th modification, the AirDrop function is not available to its owner. Also, owners of Macs with OS X and Apple computers released earlier than 2010 are forced to do without AirDrop.

    How to transfer a photo or other file via AirDrop?

    Transferring a file using AirDrop is just as easy as sending it via email. To send, say, a photo, you need to act like this:

    On iPhone, go to the built-in Photos app and select the photo you want to share.

    Click on the upward pointing arrow located in the lower left corner of the screen.

    Once the photo is highlighted, click the “Next” button in the upper right corner.

    A menu will pop up from the bottom, consisting of three sections. The topmost section will contain a list of contacts to whom you can send a photo. Select one of the recipients and click on his avatar.

    Once the transfer has been successfully completed, you will see the message “Sent” on the display. Then it’s up to the recipient of the file. A notification will appear on the screen of his gadget that another iPhone user wants to share a picture with him.

    After the recipient clicks “Accept”, the picture will be downloaded to his smartphone.

    BYRGPUB.COM 2022