Simple switching methods between video cards on a laptop

Two video cards were initially installed in laptops of the middle price category: integrated (built.in) and discrete, and the system automatically determines which one is more suitable for performing specific tasks.

But, if for some reason the operating system could not switch from one video card to another, the user will have to perform this operation manually.

What is the video adapter on the laptop?

GPU is responsible for the graphic indicators of the laptop or computer. It is not only about the display of the image on the screen and its quality. The compatibility of the system with the programs demanding programs and games depending on GPU and games depends on the volume of video memory and codecs.

Video adapters are divided into two main types:

Built.in. the video chip is integrated directly into the processor or soldered into the motherboard. Devices of this type are not characterized by high performance indicators. For office tasks or watching movies online, this option is suitable, but for modern games, it is not enough to work with graphics.

A discrete video adapter is a separate device that, in addition to the functions of an integrated chip, significantly expands the functionality of PC. With the launch and work in professional graphic software, the passage of modern games in this case does not arise.

See also: TOP-10 Acer’s best laptops: Comparison of models

How to include a video card in BIOS

If you have a motherboard with an integrated video card, but you decided to install a discrete one, then after performing this procedure you may also need its inclusion. This is due to the fact that not always and not on any model of the system board, switching between built.in and discrete cards is automatically.

You can enable the video card in the BIOS manager. To enter the BIOS man, you need to press Del immediately after turning on the computer. Sometimes other keys can be used for this. Find out which ones are used on your system board, you can from the instructions for it. If you do not grumble, press the desired key on the initial switching screen of the computer, then you will again have to reboot it.

After you get into BIOS, find a section in which you can choose which video card to use. Typically, the board selection parameter is located in the Chipset section. In this section, find the Boot Graphic Adapter Priority line (on some motherboards, the video card selection parameter is called the First Display Boot)

Select this line and press the Enter key. After that there will be options for choosing, among which there should be PCI Express or just PCI. Choose this option. This means that the computer will use the video card that is connected to the PCI Express bus. Now the device is included. In BIOS, select Exit, then. Save/Exit. The computer will reboot. At its next launch, the system will use a discrete video card.

If you activated the use of a video card connected to the PCI Express port, but after leaving the BIOS and saving settings, it is still not used, then there can be only two reasons. Either a discrete video payment is faulty, or, more likely, you have not completely connected it to the PCI Express port. Check the connection. The card should be well recorded.

You can also turn on the video card without entering the BIOS. This method is suitable for those who were not able to find the BIOS entry key on the motherboard. You need to download the BIOS emulator that can be launched from the desktop. The operation of the emulator is no different from work in BIOS itself. This utility is completely free and weighs only 20 megabytes.

Graphic Mode Switchable or Integrated

This article will talk about how to turn on the second video card on the Acer 5560 laptop.

To get started, we go to the system (click the properties with the right mouse key), then press on the device manager and go into the video card. Here we see only one video card.

This is a built.in 2D video card that goes in the processor. And in here only 2D graphics and 3D graphics does not work, since the game video card is disabled in BIOS.

Now we go to the reboot and then click F2 to get into the BIOS.

So, we went into the BIOS of this laptop. Next, we need to switch to the Main tab and here we point to the Graphic Mode line and see that we have Integrated, and we put Switchable and press Enter.

After we made this settings, our laptop will switch from the built.in integrated video card to the game card. If it takes, of course. That is, now there are two video cards.

If you do not have drivers on the second video card, then they will need to be put. And until you put them, you will not work 3D card.

Now reboot the laptop. Next, we go to the device manager again and here we see that the second game cards appeared.

If you want, then of course you can turn it off in the same way as we turned on.

Sometimes you can’t turn off the second video card through BIOS and you have to solder part of the elements from the motherboard. And only after that the laptop begins to work normally on an integrated map.

This is how you can turn on or off the game card. You need to turn it off, for example, when it just doesn’t work. Or in order to save battery.

You read the article on how to switch the laptop’s video card to the external. We hope that all the information was accessible and understandable. We wish you good luck. Watch the video below.

Greetings. Switchable Graphics Mode (System Configuration) in Bios allows you to choose a graphic adapter, has two values:

  • Fixed. Examped by default. Allows you to select a video card in the settings independently. In which one is incomprehensible, perhaps, for example, the settings in games are meant for example.
  • Dynamic. Switching of video cards occurs according to the specified parameters in corporate party (for example, AMD Catalyst). There may be problems in games. Note: Dynamic switching may not work in OpenGL applications.

For example, Fixed installation will allow you to manually set a video card in Skyrim:

The presence of Switchable Graphics Mode depends not only on the motherboard, but also on the BIOS version. May appear after the BIOS update.

Switchable Graphics Mode. What is it in BIOS?

Greetings. Switchable Graphics Mode (System Configuration) in Bios allows you to choose a graphic adapter, has two values:

  • Fixed. Examped by default. Allows you to select a video card in the settings independently. In which one is incomprehensible, perhaps, for example, the settings in games are meant for example.
  • Dynamic. Switching of video cards occurs according to the specified parameters in corporate party (for example, AMD Catalyst). There may be problems in games. Note: Dynamic switching may not work in OpenGL applications.

For example, Fixed installation will allow you to manually set a video card in Skyrim:

The presence of Switchable Graphics Mode depends not only on the motherboard, but also on the BIOS version. May appear after the BIOS update.

How to enable a built.in video card on a computer?

In most cases, in order to use the built-in graphics, it is enough to connect the monitor to the corresponding connector on the motherboard, having previously removed the discrete video card from the PCI-E slot. If the connectors are absent, then using the integrated video man is not possible.

To do this, depending on the manufacturer of the motherboard, click the key “Del”, “F2”, “F5” or “F12” during loading. In the BIOS Setup settings, find the option of choosing an active graphic adapter and turn on the discrete video card by installing the PCIE-adapter with the primary device.

How to enable a discrete video card?

To include a discrete video card, you will have to use the device dispatcher (entering it through the Start menu): go to the properties of the graphic adapter and turn on the device (or update the drivers); For a laptop, you should not only turn on the external, but also turn off the integrated adapter.

The point is the house that today computers can be equipped with more than one video payment, as before, but two at once. integrated and external. But, they cannot work at the same time, and you cannot start the built.in and external video card at the same time.

Device Manager

If the laptop is constantly working on a built.in video card based on the processor (Intel or AMD), the easiest way to switch it is to turn it off completely so that the system always applies a discrete by default.

enable, video, card, bios
  • Launch the “Device Manager”.
  • Next, find and open in the list the item “Video.adapters”.
  • Select your card and press the “Disable” with the right mouse button.

In order for the changes to apply, it remains only to restart the laptop.

Driver settings menu

After pressing the right mouse button on the desktop, the context menu will come up, where there will be a transition to settings of the video card drivers (in the indicated screenshot, these are settings for NVIDIA).

In this panel, on the left side, you need to click on the “control of 3D parameters”, and then select the “high.performance NVIDIA processor” as an adapter of graphics. After that, you can keep the settings.

In the NVIDIA settings, it is also possible to indicate for a certain game the video card that is used. This is necessary:

  • Go to the video cards settings, then go to the line “3D Parameters”;
  • click on the line “software settings”;
  • indicate the necessary game;
  • set a graphic processor for the specified game (watch the image below);
  • Save the settings.

We switch between video cards to Windows 10

In Windows 10, you can set for each individual application the use of an integrated or discrete video card. To do this, make a couple of changes to the settings of the system, namely:

enable, video, card, bios
  • Open “Parameters”, “System” and in the menu on the left we select “Display”. Scroll the slider down and select “Graphic settings”.
  • Next, we cross the path of “Games and Programs” and again “Settings of graphics”.
  • Now select the application by clicking on the “Add” button.
  • A small window “Graphics specification” will appear. There will be three values: default systemic values, energy conservation (integrated video card) and high performance (discrete video card).

After rebooting PC, the system will independently choose the right video card when starting the program.

Also, if you have a version of the operating system below Windows 10, then in order to select one video card, you should turn off the second. For example, your laptop uses a built.in video card. In order for the system to engage a discrete graphic accelerator, it is worth opening the “Device Manager” (Winr, Devmgmt.MSC) and expand the Video.adapter branch. Here we press the right mouse button on the built.in video card and select “Disable”.

After rebooting PC, the system uses a discrete video card.

How to switch video cards via BIOS?

To switch one video card to the second, it is worth booting in BIOS. To do this, at the start of the PC, click F2, Del, F11 (the combination of entry keys to the BIOS is indicated in the instructions for the motherboard or laptop).

Next, you need to find the section “Config” or “Advanced”. Select “Graphics Device”. A list of video cards will appear. Choose a video card that needs to be turned off and set it with the “Disabled” or “Enabled” value to enable.

After click “F10” to save the settings. Changes will be applied after reloading the system.

Which will come in handy before changing BIOS settings?

Finally, the last important point. If AMD or NVIDIA chipsets are installed in the computer system as one of the adapters, as a rule, the corresponding control utilities (AMD Power Xpress, Catalyst Control Centre, Nvidia Hybrid Power, Physx, and others are installed for them.).

And before raising your head over how to turn off the video card in the BIOS, just start such programs. It is with their help that you can make appropriate settings.

In addition, many forget that you can turn off the adapter and change it to another in the “device dispatcher”, where from the context menu by clicking with the right button on the selected adapter you need to use the section of properties in which there is a disconnection button. When replacing the card, the device can be completely removed from the system.

enable, video, card, bios

How to switch the video card in the BIOS?

Now directly about the settings of the primary system. The whole procedure looks quite simple, but in some stages there may be difficulties. How to switch the video card in the BIOS? The order is this.

When loading, we enter the BIOS or UEFI, using special keys or their combinations, and we are looking for a section where video adapters and their current settings will be shown. This is where the difficulties begin. The fact is that the names of the sections and the location of the parameter menu may vary quite strongly. The main sections are usually called Advanced Features Setup or Chipset Features Setup. But the subsections and the parameters necessary for changing priority can have the following designations:

  • FIRST DISPLAY BOOT;
  • Boot Graphic Adapter Priority;
  • PEG PORT/GRAPHIC Adapter Priority;
  • Vga boot from;
  • Primary Vga BIOS;
  • Primary Video Controller;
  • Intergulation Video;
  • Primary Video;
  • Video Pciex and T.D.

The built.in video card in the BIOS is indicated by the term Integrated, and the discrete one belongs to the type of PCI. In any case, the parameters should set priority precisely for the graphic adapter that will be used by default. After installing all the necessary parameters, you just need to save changes and restart the system. For this, the F10 key is used with confirmation of saving settings by pressing the key.

How to Update ANY Graphics Card on Windows 10

Setting parameters in the BIOS menu

Turn on or reboot (depending on the current state) your PC. When the POST logo appears or the initialization procedure, click the “DEL” or “F2” button, depending on the PC model. After activation, you will enter the BIOS menu of your system board.

In BIOS, find and open the graphic settings menu. Usually it is in the Advanced, Chipset Features or Graphic Configuration menu.

Depending on the manufacturer BIOS, the names may differ: “Onboard Graphic”, “PCI”, “AGP” or “PCI-E” (depending on the type of tire used on your motherboard). The choice of “PCI-E”, for example, activates a discrete video card, and the built-in-will disable.

In UEFI BIOS, graphics settings are designated as “Primary Display” or “Init Display First” in the section, configuration of the motherboard.

After you have found the necessary settings, configure the parameters of the graphics based on the following properties. Install the tire that is associated with the necessary graphics: PEG (PCI Express 16x), IgPU (integrated graphics), PCI or AGP. Also, the necessary item can be called Primary Graphic Adapter or simply Graphic Adapter.

I BIOS Flashed my Graphics Card and This Happened

After setting up the required parameters, press the F10 key or go to the Exit menu and select Save and Exit. After that, the computer will reboot and the changes will come into force.

Other warnings

The information described below does not apply to laptops, as well as computers using integrated graphic chips. Their video adapters, with rare exceptions, do not have an independent BIOS. The parameters of their work can only be changed by flashing the main BIOS computer.2. If several discrete video cards are simultaneously used in the system, during the firmware in the computer you need to leave only that video card, which needs to be updated by connecting it to the main (the one closest to the processor) of the PCI-Express Material board connector.3. The recommendations set forth on this page are suitable for flashing BIOS video cards with one graphic processor. This is the vast majority of video cards installed in home and office computers. But still, before using the instructions, make sure that your video card is also one.processor. Otherwise, as a result of the actions below, it will most likely come to a non.working state. You can find out the number of graphic processors of a particular video card model by studying its specifications on the manufacturer’s website. A clear feature of the presence of two processors is the presence of the “X2” mark in the name of the video card model. You can also check the number of graphic processors with the help of a utility for flashing immediately before the flashing itself (see. below).

Disconnect the computer and then de.energize it, taking out the power cord from the outlet. Disconnect the cable from the video card and connect it to a similar port built directly in the motherboard. This is a port of an integrated adapter.

если у вас данный порт отсутствует, то скорее всего, в вашем PC нет встроенной графики.

If the above method has not helped, do the following:

  • De.energize the system unit and remove all the connected devices from the ports
  • Remove the lid of the side compartment of the system unit by twisting 2 screws on the back panel.
  • Carefully remove the video card. To do this, unscrew the screw that attaches to the body, and then move the lever that fixes the card in the PCI slot and pull it over.
  • Close the system unit. Turn on the computer.

After that, you should automatically turn on an integrated graphic adapter. If this does not happen, then your PC does not support the built.in graphics.

Turning on the video card in the case of a desktop computer

If you are the owner of a desktop computer, then you may have two video cards: one. integrated into the motherboard, and the other. installed in the expansion of the motherboard (sometimes such boards are called discrete). If you use a built.in (integrated) video card, and then purchased a discrete one, then you may encounter the following problem. how to turn off the video card in the bios and change the image output method so that it is carried out by a more powerful discrete card.

In most cases, serious problems in the question of how to switch the video card in the bios, the monitor will work with the video card to the connector of which it is connected. However, such switching in automatic mode is not always possible. In some BIOS, the user must independently install the desired video card, and turn off the unnecessary. Often to solve this problem, you can use the BIOS options.

Therefore, it is worthwhile to talk a little more about how to enable the video card in the BIOS. Usually this procedure is simple. BIOS or UEFI options designed to include a video accelerator can have various names. For example, these can be Primary Display or Init Display Fist in a section on the setting of the motherboard equipment. Possible values ​​of the options may be the options for Onboard, PCI, AGP or PCI-E (depending on which tires are used on your motherboard). The choice of PCI-E option option, for example, will enable the external PCI-Express video card, and the built-in.

Turning on the video card in the case of a laptop

Many modern laptops, like desktop computers, are equipped with two video cards. built.in and discrete. A built.in laptop video card is usually located in a chipset or even in the processor itself. This video card usually has low energy consumption, but at the same time, it cannot boast of high performance. Therefore, very often laptops are equipped with a second, discrete video card. Such a video card is much more suitable for applications for high requirements for graphics, for example, for computer games.

It is easy to understand that due to the design features of the laptop in which the monitor is built into the case, the choice of the necessary video card cannot be carried out in the same way as in the desktop computer-switching the cable. Therefore, this operation should usually be performed by the user himself. True, there are models of laptops that can automatically switch video cards depending on the download and used by the operating system, for example, turn on the discrete video card in case of starting the game and disconnect it at the time of launch of an ordinary office application. But if there is no such opportunity in your laptop, then often in order to use a discrete video card, the user has no choice but to disable the built.in video card in the BIOS.

So, how to disable a video card in a laptop’s bios? First of all, it is worth noting that far from always to turn off or turn on the video card you need to climb into BIOS. The fact is that special software utilities are often used to switch the video card on laptops. If the laptop contains AMD chipset and an ATI/AMD discrete card, then switching can be carried out using the Catalyst Control Center program. To select a video card in laptops with an Intel processor and a discrete NVIDIA video card, you need to use the NVIDIA control panel program.

If you use an Intel laptop and a discrete ati/AMD card, then for automatic switching a video card during work you will need to choose a Switchable option in the Display Mode option in BIOS. The BIOS Display Mode option will be indispensable if you operate in the Windows XP operating system, and not in VISTA OS, Windows 7 or 8, since the XP programs for managing video accelerators, as a rule, do not work. To enable the discrete video card of the laptop with Windows XP, set the Discrete option value.

BYRGPUB.COM 2022