How to turn off Siri completely?

Go to Settings → General → Siri and turn off the main switch, and then summarize the action in the pop-up menu.

How to turn off Siri on the lock screen?

Open Settings → Touch ID & Password. After you enter the lock password in the “Access with screen lock” section, deactivate the toggle switch opposite “Siri”.

Decrease click speed

When working with the Home button, double or even triple presses can be used to perform certain tasks. By default, to implement the plan, you need to press the Home button as quickly as possible. If you are not satisfied with this state of affairs, then you can reduce the speed of double or triple click.

To do this, open Settings → General → Accessibility → Home. Here you can choose such options for double or triple pressing as “Slow” or “Very slow”.

Disable Reachability to avoid accidental clicks

After Apple decided to increase the diagonal of the display from a rather comfortable 3.5 and 4 inches to 4.7 and 5.5, with which, holding the device in one hand, it becomes terribly difficult to reach the far corner of the display, in iOS the Reachability function was integrated, well, or “Convenient access” in the Russian equivalent.

Its essence lies in the fact that by double-tapping (just by touching, not pressing) on ​​the “Home” button, the interface shifts down and it becomes easy to reach the most remote areas of the display with one hand.

But no matter how cool the function is on paper and in various videos, I personally use it in my daily activities only a couple of times a year. I will say even more. it periodically causes discomfort due to accidental pressing.

You can disable it, for which you need to go to Settings → General → Universal Access and in the “Interaction” section opposite the “Easy Access” item, move the switch to the inactive position.

5 iPhone Home Button Settings You May Not Know About

The Home button on iPhone has 6 different daily functions: call up the lock screen, return to the springboard (home screen), open ambiguity mode, scan your fingerprint with Touch ID, launch Siri voice assistant, and Reachability mode for using iPhone with one hand. In this article, we will tell you about 5 more settings that can be applied when working with the Home button on the iPhone.

Most of the functions are available on iPhones with iOS 9 (and higher), but some of them may be present on older versions of the apple operating system.

Assigning a triple click action

A triple press of the Home button can also be assigned a specific action. To do this, open Settings → General → Accessibility and scroll all the way down until you find the Shortcut Keys menu, which is disabled by default.

Here you can activate one of the following functions:

Disable Siri

Long holding the Home button by default launches Siri. But if you do not use it or, for example, often take screenshots, then in order to avoid a false launch, you can disable the launch of the voice assistant.

Cleaning up RAM

Using the Home button, you can also clear the RAM of the device, which will also be relevant on older iPhones and iPads.

To do this, hold down the “Power” button until the slider appears to turn off the device (“Turn off”).

Then press and hold the Home button until the desktop appears (about 10 seconds). That’s it, the RAM is cleared.

What is Assistive Touch. Which iPhone models support

The ability to bring the Home button to the screen, first appeared in the iOS 5 firmware, accordingly, based on this post, it becomes clear that you can make a virtual button on the screen in the following models:

• iPhone 3gs
• iPhone 4, 4s
• iPhone 5, 5s, 5c, 5se
• iPhone 6, 6s, 6 Plus
• iPhone 7, 7s, 7 Plus
• iPhone 8, 8s, 8 Plus
• iPhone X (especially relevant)
• Other new models

Once the Home button is on the screen, you need to know the basics of how to use it. In standby mode, the button is translucent, when dragged and used, it darkens, when you press on the screen. 3D Touch (not in all iPhone models) increases in size.

After switching on, press the Home button on the screen, a widget with substitutes for physical buttons and icons with additional features will appear, by climbing on them you can select the necessary functions, we managed to rotate the screen to its normal position. How to customize your personal widget and other settings, see here. Setting up AssistiveTouch.

Now you know what Assistive Touch is.

Displaying the Home button on the iPhone screen. where and how

Using the instructions below, you will be able to display a virtual button on the display:

• Launch the standard Settings application and select. Basic
• Looking for. Universal Access
• Choosing. AssistiveTouch
• Turning on the green marker. AssistiveTouch

We just put the Home button on the iPhone screen, now you can drag it to any edge or corner of the display, thus placing it in a convenient place for you.

Virtual Home button on iPhone screen

Sometimes you can see a virtual Home button on the screen of iPhones and iPads. This button is called AssistiveTouch, it is an auxiliary element of the iOS operating system. Often used as a replacement for the physical Home button and other iPhone buttons. Looks like a white circle in a dark square with oval corners.

When this virtual button is turned on and used on the screen:

• Used by people with disabilities.
• If one of the physical buttons located on the iPhone body fails or starts to junk, then this button is often turned on, and thus displayed on the iPhone display.
• After the physical button was repaired in a service center, or made in a workshop, then out of habit, some people continue to use the Home button added to the screen.
• There are people who install an on-screen button on the iPhone, just for convenience, for example, it is more convenient for someone to remove the Control Center (to quickly turn on the Internet), some use this AssistiveTouch to soft restart the iPhone, etc. In general, until you try it yourself, you will not understand whether you need it.
• Wouldn’t be surprised if someone just doesn’t want to expose normal buttons to wear.

How to remove virtual button from iPhone screen

Some iPhone owners with a button pulled out on the display cannot turn it off and can only solve the problem by completely resetting or flashing iOS in iTunes. But if you don’t need the button on the screen, you don’t use its functions, then this button can be disabled in the AssistiveTouch settings:

• Settings. General. Accessibility. AssistiveTouch. turn off the AssistiveTouch switch

The button will no longer appear on the iPhone screen.

Setting screen orientation on iPhone

Screen rotation on iPhone needs to be adjusted to suit your personal preference. Not everyone likes the automatic mode, since at the slightest turn of the smartphone, the orientation of the screen changes. For example, reading a book lying on the bed, turning on its side, the smartphone screen will also unfold. It is convenient to use auto-rotate when a person often watches a video. In this case, the orientation quickly changes to horizontal and there is no need to do a series of adjustments every time. If screen rotation is off, the phone will work in one screen mode until the user turns off the function.

Note! Some apps have a separate layout for landscape orientation (mail, calendar, messages, photos).

On iPad devices, the option may work differently depending on the model. For owners of the iPad version lower than the iPad Air, you need to know that the regulation of the function is carried out through the basic settings. There is an item “Use side switch”. This section is responsible for controlling the rotation through the volume buttons. On newer models (iPad Air 2, iPad mini 4), auto-rotate can be configured through the Control Center.

Owners of smartphones version iOS from 4.0-6.0, in order to change the settings, you need to double-click on the “Home” button. As a result, the multitasking panel will appear at the bottom of the screen. Here you need to scroll the menu to the right to the button with the image of a lock and an arrow. With its help, the work of auto-rotate is regulated.

How to turn screen rotation on or off on iPhone

Screen rotation is a standard feature that works on all smartphones by default. The option is aimed at making the use of technology more convenient, especially when watching movies or working with documents. However, screen rotation on the iPhone often turns on at the wrong moment, you have to turn the smartphone several times to return the orientation to portrait mode. To eliminate problems while using the gadget, you need to explore options for enabling and disabling screen rotation.

How to turn off screen rotation on iPhone and iPad

You can make orientation lock in a few seconds through the main control center. The actions will differ slightly depending on the gadget model used.

For new iPads and iPhones, starting with Model 10 and XR, where there is no Home button, shutdown through the Control Center is suitable. You can call it by swiping down on the right side of the screen.

On iPhones S, SE, 7 and 8, you need to swipe up from the bottom to open the control menu

In the menu that opens, find the “Lock” section and click on it. It is located under the group of main settings. After the icon turns red, you can be sure that screen rotation is turned off. To disable the lock, you must repeat these steps again through the control point.

The above steps will help you always use your iPad or iPhone without accidentally rotating in one orientation. The lock allows you to enjoy portrait orientation even while lying on your side, watching YouTube or using a browser.

Note! If necessary, the user can always enable or disable automatic rotation through the standard settings.

Please be aware that the iPhone display cannot be locked in landscape mode. The iPad, on the other hand, can be locked in both landscape and portrait mode.

How to disable auto-rotate on iPhone in the form of detailed instructions:

• First, you need to unlock your iPhone to open the main menu.
• Moving from bottom to top brings up a panel with quick access to settings.
• By clicking on the lock icon, you can enable or disable the rotation, depending on the desired action.

After pressing the lock, the control center will display the message “Vertical orientation off”. Depending on the position of the button, the red background may light up or go out. To check the function, go to any application and turn the smartphone.

Note! If you activate the auto-rotate lock in landscape mode, the background of the display will return to vertical mode.

You can remove the screen rotation through the AssistiveTouch item. This is a common feature that users use to customize buttons for specific actions. AssistiveTouch allows you to flip orientation in different directions in apps that support this feature.

Note! Turn off the screen rotation lock before using AssistiveTouch.

Go to the settings and open the “Basic” item. All major smartphone options are contained here. Under the Accessibility section, there is an AssistiveTouch that needs to be activated. There is a section “Physiology and motor skills” here. Next to the “AssistiveTouch” label, activate the switch. A green slider indicates that the feature is enabled. In addition to the icon, a small gray square will appear on the smartphone screen. Next, you should exit the main settings and open any application. By clicking on the square, a menu with options will open: notifications, device and control point. Here you can activate the action of the mechanical Home button by transferring it to the smartphone screen via the “Home” option.

To open an additional menu with parameters, you must click the “Device” item. Then “Screen Rotation” is selected. While the lock is off, you can rotate the phone in any direction. You can click on “Right”. “Left” to switch between orientations. To close the AssistiveTouch menu, tap anywhere on the screen.

What is screen rotation on iPhone

IPhone Auto-Rotate is an option that allows you to use vertical or horizontal screen orientation. For example, when watching movies, it is much more convenient to use the horizontal mode. Reading books and browsing social networks is carried out through vertical orientation. By default, the screen will always flip when the smartphone is tilted. This feature is not only for Apple products, but also for other devices.

What the auto-rotate icon looks like on iPhones

The action is based on a device. a gyroscope. With the help of special elements, information about a change in position is transmitted to the working area of ​​the phone. Then a pulse is read and the screen is rotated. If necessary, you can lock the automatic flip and then the screen will be in one position.

The option allows you to rotate the screen 90 and 180 degrees

How to enable auto-rotate on iPhone and iPad

Initially, the screen will rotate automatically from the very first turn on, since the settings are by default. In some programs or games, orientation rotation is not provided, so the picture will always be shown in the same position, regardless of the device settings. This is due to the application code that has been programmed to lock the turn.

Note! In normal cases, turn inhibit must be manually activated. The action of this mode will be indicated by a special icon in the menu bar of the iPhone or iPad.

• Open the main menu of the device.
• Raise the curtain with notifications with a swipe up.
• In the window that opens, find the lock icon and click on it.

As a result, auto-rotate will work again and the screen can be rotated in the required direction.

Modern iPhones have a function in the “General” section that can change the operation of the switch on the side of the gadget. By default, this button is responsible for activating and deactivating the sound. However, it can be set to “Orientation Lock”.

If the switch is in the “Orientation Lock” mode, then you cannot work with auto-rotate through the “Control Center”. In this case, all actions are carried out using the switch.

Why iPhone auto-rotate screen doesn’t work and how to fix it

Auto rotate will only work when the switch is inactive. If the screen does not rebuild to landscape orientation, then the main reason should be looked for in the settings. Experts recommend immediately checking the “Control Center”, which contains the section “Blocking”.

If the rotation stopped turning on on iPhones of the Plus version, then the possible reason lies in the mode of displaying icons on the home screen. It is necessary to open the item “Settings”. “Brightness and screen”. “View”. There are two main display modes for items: standard and enlarged. The second option displays the icons in an enlarged view, and the rotation function will be disabled. Despite this, the screen will be flipped in all applications. To activate desktop rotation, open the “Standard” tab and click “Install”. The whole process will take a few seconds.

For mechanical reasons, auto-flip may not work due to damage to the gyro. This happens as a result of sharp blows, falls or shaking. The operation of the mechanism gets confused, which leads to partial or complete inoperability.

Note! Damage to the gyroscope must be eliminated by the master, since it is impossible to do this on your own.

Often the reason for the incorrect operation of the iPhone is a failure in the operating system. You can try to save the situation by rebooting your smartphone or doing a full reset. To reboot, you must use the power off button of the device. After the screen turns off, the gadget should be launched after a few minutes and check if auto-rotate works or not.

Factory reset menu on Apple smartphones

Factory reset on iPhone means deleting all personal data on your smartphone, so before starting the process, you should back up your files, save contacts and other important information.

At the time of reset, you need to fully charge your iPhone or connect to power. Next, the settings open, the reset section is at the very bottom here. The device offers several cleaning options: delete settings, content and settings, network data, dictionary and keyboard, get rid of the data of the Home button, and also throw off location warnings.

The most common and effective method is to reset all settings. In this case, the information from the smartphone is not lost. In the section, you must confirm pressing the “Reset all settings” button with a positive answer. The whole procedure will take about 1-2 minutes. After execution, the iPhone will revert to its original settings, but the files and browser bookmarks will remain in place.

Note! Hard reset iPhone is a more radical method that allows you to completely clean your phone.

It is recommended to do a full reset not only to improve the phone’s functions, but also to clear unnecessary information. This is especially important for devices that have been in operation for a long time. After several “Erase iPhone” confirmations, data deletion begins. The smartphone will automatically shut down and restart again. After turning on, you will need activation, during which you must definitely connect to Wi-Fi and iTunes. Next, a message will appear on the screen where you need to select one item. set up a new one or restore from a copy. When restoring, all previous files will be returned, but only if a backup was created earlier. If all else fails, a flashing is done.

IPad Air, iPad 2, iPad (3rd generation), or iPad (4th generation) have a dedicated switch on the right side panel. Depending on the settings installed, this button is responsible for either locking the screen or mute the sound. You can test the rotation of the page orientation using this switch. If it was not possible to turn the page, then you need to change the basic settings.

How to remove assistive touch on ios devices

Auto-rotate the screen is an indispensable feature that every user has used at least once on smartphones or tablets. Manufacturers equip this option with a technique to facilitate the use of gadgets. At any time, using the settings, you can turn orientation flip on or off, thereby adjusting the device to your actions.

How to display the Home button on the iPhone screen

The breakdown of the Home button is not a common phenomenon, however, when this happens, the user is practically deprived of the opportunity to fully use his iPhone. Indeed, without this button, it is impossible to return to the home screen, close applications, switch between running applications and perform many other operations.

The surest solution in such a situation is to contact the service center. But, there is not always time and money to repair your favorite gadget. Sometimes you need a phone right now, but it doesn’t actually work. In such a case, there is a temporary solution. You can bring the Home button to the iPhone screen and press it using the touchscreen.

You can use this method on any iPhone model that has been updated to iOS 5 or later. And these are such models as iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

How to press the Home button on the iPhone screen

Now, a few words about how to press the Home button using the iPhone screen. To do this, you need to click on the floating button of the “Assistive Touch” function. As a result, a menu of several items should appear on the screen. Among other things, there will be a Home button. Click on it and your iPhone will react as if you pressed a hardware button on the body of the device.

If suddenly your menu does not have a Home button, then return to iPhone Settings and open the section “General. Accessibility. Assistive Touch. Top Level Menu”.

Here you can customize which options are available in the Assistive Touch menu. To add a Home button, click on any of the available options.

And in the list that opens, select the “Home” button.

Here you can also reset the “Assistive Touch” settings or increase the number of available options.

How to enable Home button on iPhone screen

If you want to display the Home button on the screen of your iPhone, then for this you need to go to the settings and turn on the “Assistive Touch” function there. To do this, open the “Settings” application and go to the “General” section.

Next, you need to open the subsection “Universal Access”.

And go to the settings of the “Assistive Touch” function.

Here, at the very top of the screen, you need to activate the switch, which is responsible for turning off and on the “Assistive Touch” function.

After enabling the “Assistive Touch” function, a floating round button should appear on the screen, which will look something like the screenshot below.

The appearance of this button means that the “Assistive Touch” function is enabled and can now be used to control the iPhone without using hardware buttons, such as the Home button.

What else you can do with Assistive Touch

Assistive Touch is a feature designed primarily for people with disabilities. As already mentioned, with its help, you can display the Home button on the iPhone screen and press it without using a real hardware button on the case. But apart from this, “Assistive Touch” provides a lot of other possibilities. For example, you can use it to:

• Open the list of notifications or Control Center;
• Emulate the use of gestures and device shaking;
• Control the sound volume;
• Enable screen lock;
• Turn on screen rotation or orientation lock;
• Take screenshots;
• Manage multitasking;
• Use the camera as a magnifying glass;

How do I use Assistive Touch? Which iPhone models support this feature?

The system allows you to customize the home button in versions of iPhone from 3gs up to iPhone X.

When the Home button is activated, you should familiarize yourself with its basic functionality. In rest mode, it is translucent, and when dragged, it becomes noticeably darker, thereby allowing the user not to pay attention to it in moments when there is no need for it.

If you click on Assistive Touch, a window will appear with all its functionality, among which you can select the most necessary.

How to display the Home button on the iPhone screen

Sometimes iPhone and iPad users need a virtual home button. This button is called Assistive Touch. As an accessory to the iOS OS, it often comes to the rescue when the physical Home button or some other button fails.

This tool is used in such cases as:

• The owner of the gadget is a person with disabilities;
• There is a problem with any button on the case (in most cases, such incidents occur with the Home button);
• After the repair of the physical button, the owner of the iPhone or iPad already uses Assistive Touch out of habit;
• Some people put a virtual Home button on the screen for convenience, someone prefers to quickly go to the Control Center in this way or use it for a soft reboot of the system, this is a matter of taste;
• There are cases when the user uses a virtual button in order to avoid wear and tear on regular buttons.

How to set home button on iPhone screen

Setting up a virtual Home button does not take much time. Follow these guidelines, which include:

• Go to the “Settings” menu, then select the “General” item, then go to “Universal Access”;

• Select the Assistive Touch item and enable the virtual button using the slider, which will turn green;

• Now the shortcut we need has appeared on the screen, which will allow us to use all the necessary functions. Assistive Touch also allows you to move the button to a convenient location on the iPhone screen.

How to remove the virtual Home button from the iPhone or iPad screen

Sometimes the user of an apple gadget can get confused and instead of disabling this function in the settings menu, he decides to completely reset the settings or is completely flashing iOS. To disable the Home button, you need to take the following simple steps:

• Go to the “Settings” menu, select the “General” item;
• We select “Universal access, then” Assistive Touch “, after which we disable this function using the slider, which, when deactivated, will turn gray.

• From now on, the Home button is missing on the screen of your iPhone.

How to use Assistive Touch?

First of all, you need to place the function menu start button in a convenient place. You can move it along the screen frames by holding it with your finger. You can’t place a key in the center of the screen.

Having decided on the location of the button, click on it. You will see a menu like this:

At the bottom of the menu there is a virtual Home button displayed on the screen. The functionality of the virtual button is 100% consistent with the functionality of the physical one. in particular, a long press on it will launch Siri.

There are other options in the Assistive Touch main menu:

Notification Center. allows you to call the screen with notifications. The traditional way to bring up this screen is by swiping from top to bottom. Voice control is another way to “wake up” Siri. Control Center. Allows you to display a menu for quick control of some of the iPhone’s functions. Pressing this key actually replaces the bottom-up swipe. Favorites. Through “Favorites”, you can activate gestures that the user has created independently. To start creating a new gesture, go to “Favorites” and click on any of the squares with a “” inside.

Also in the main menu “Assistive Touch” there is a button “Apparatus”. By clicking on it, you will be taken to a submenu, where you will find on-screen keys that allow you to perform actions such as locking / rotating the screen and changing the volume of the device.

With the help of “Assistive Touch” you can even take a picture of the iPhone screen. for this, in the function menu, go along the path “Apparatus”. “” and click on the “Screenshot” button. Only static images should be photographed in this way, because the on-screen element is triggered with a significant delay.

On devices running iOS 9, the “Assistive Touch” main menu is customizable. In particular, users are able to increase the number of icons in the main menu to 8 pieces.

How to remove the Home button from the iPhone screen?

Deactivation of the “Assistive Touch” function is performed in the same way as activation. You just need to follow on the iPhone along the path “Settings”. “General”. “Accessibility”. “Assistive Touch” and switch the toggle switch of the same name to the inactive position.

The square with a white circle inside will disappear from the screen.

How to display the Home button on the iPhone screen?

Until the user goes to the workshop to repair the broken Home button, he can control the device using software emulation of this key. The virtual Home button is very convenient and will definitely not fail.

On iPhones, there is only one physical navigation button. the Home button, which is located in the middle below the screen. This key allows you to minimize applications, call the virtual assistant Siri and perform many other necessary actions. It becomes almost impossible to control a gadget without the “Home” button. but what if it is out of order??

Fortunately, Apple has provided the ability to display the Home button on the iPhone screen. You will learn how to do this by reading this article.

How to enable “Assistive Touch”?

Assistive Touch enables you to display the Home button on your iPhone. This function is intended for people with disabilities, however, owners of gadgets with faulty physical keys use it more often.

The Assistive Touch function is especially popular among Chinese users. in the Middle Kingdom, almost half of iPhones are controlled “from the screen”. Practical Chinese argue that this method of control is not only more convenient, but also prevents wear and tear on the physical buttons.

How do you set up Assistive Touch? It is enough to perform a few steps:

Go to “Settings” and follow the path “General”. “Accessibility”.

In the “Accessibility” section, find the “Interaction” block. It will have a subsection “Assistive Touch”. go to it.

Toggle the Assistive Touch slider to the active position.

A translucent square with a white circle inside will appear on the screen. the menu launch button.

This means that the “Assistive Touch” function is activated and you can control the gadget without resorting to physical keys.

“Assistive Touch” can be enabled on any Apple device with iOS version higher than 5.0.

How to set up quick access to “Assistive Touch”?

You can adjust your iPhone so you don’t have to navigate through the settings to launch Assistive Touch. Here’s how to do it:

Go to the “Accessibility” section in the main settings of the gadget and scroll the screen to the very end. Below you will see the subsection “Keyboard shortcuts”.

In the subsection “Keyboard shortcuts” check the box next to “AssistiveTouch”.

After that, you can call the “Assistive Touch” menu launch button by triple pressing the physical “Home” key and hide it in the same way.

Although the virtual button “Assistive Touch” can completely replace the physical button “Home”, this does not mean that you can wait to repair the device. If the gadget is under warranty, the user should go to the service center immediately. otherwise he runs the risk of saying goodbye altogether to the hope of free elimination of the defect.

Home Button Advantages and Disadvantages

The home button on the iPhone 8 and other touchscreen versions of the smartphone has both pros and cons. The benefits include:

• significant reduction in the likelihood of breakage of the mechanism, thanks to the installation of a touch key.
• there was an option to adjust the force of pressing, which makes it possible for any user to adapt the operation of the apple phone to their preferences.

The disadvantages include the fact that the touch button on the iPhone 7 works only from interaction with the skin of the fingers without gloves. This can be difficult for users living in the northern regions.

How to customize the Home button on iPhone 7, 8

The home button on iPhone is the most used key. Every user should know how to customize the home button on iPhone 7 and other iPhone models. This is what will be discussed.

To use your smartphone comfortably, you need to correctly configure the home button on iPhone 7. This procedure allows you to select the optimal intensity of the touch response.

New features of the Home touch button

Apple phone models, starting from version 7, have been significantly improved. They have a special design, where the home button on the iPhone, unlike previous models, is tactile. It is complemented by a Taptic Engine that generates sensory feedback rather than mechanical feedback. Now, when touched, the vibration of the iPhone 7 home button is triggered. Depending on the strength of the impact on the key, the user can unlock the screen, open the list of “Quick Actions”, “Reminders”, “Messages”, etc.

How to customize the response of the Home button on iPhone 7 and 7 Plus

The tactile response can vary significantly. In order for the smartphone to notify the user correctly, it is necessary to set up the home button on the iPhone 7. The “Home” sensor determines the force of pressing and reacts to this by calling the voice assistant Siri, unlocking the screen or other option.

If the smartphone is supposed to be used in conjunction with a case, then before setting up the home button on the iPhone 7, you should put on a plastic or other decorative element. This, as well as the type of surface where the phone is located, affects the recognition quality.

To change the response mode you need to:

• open “Settings”;
• subsection “Basic”;
• select the item “Home button” from the list;
• iOS will offer 3 different options as numbers. Choosing, for example, 1, you need to check if it fits. To do this, touch the Home key and the sensor responds with an entry-level vibration. Decide on a convenient response type based on your preference.

Keep in mind that setting up the home key on iPhone 8 affects screen unlocking, taking screenshots, multitasking, etc. Next, in the upper right corner of the display, select the “Finish” button to save the settings.

Double-tapping the home button on iPhone 7 moves the home screen down for a couple of seconds and lets you easily open even the most distant icon.

How to remove double click on iPhone?

If you are not satisfied with this state of affairs, then you can reduce the speed of double or triple presses. To do this, open Settings → General → Accessibility → Home. Here you can select such double or triple tap options as “Slow” or “Very slow.” May 15, 2016.

How to turn off Airpods voice control?

• go to Settings. General. Universal access. Home;
• find the section Press and hold to speak;
• check the box Voice control.

How to disable double tap on the screen?

You can just try calling your smartphone or tablet. When the call is reflected on the screen, cancel it and quickly go to the settings, then double-click in “security” to turn off the screen lock.

How to disable triple tap on iPhone?

To use the quick command for accessibility, click the Home button three times. To slow down the speed when you double- or triple-click the Home button, go to Settings Accessibility Home, and then change the settings.

How to completely turn off voice control?

Open the Google app on your smartphone. In the lower right corner, click the three horizontal lines icon and open Settings. Then select “Language. Voice Search”. Tap the blue button next to “Recognize OK Google” to turn it off.

How to set Siri to speak Who is calling?

To enable this option and start using it, you must:

• Open mobile device settings.
• Go to the section on handling calls Phone.
• Find the Call Announcement option.

How to remove the Home button from the iPhone screen

The Home button is the hallmark of most iPhone models. This is a universal key that makes using your phone much easier. Since the button is pressed very often, the manufacturers have installed a number of functions for it, among which there are both single and double presses, as well as triple ones. Every user should know how to display or remove the Home button on the iPhone.

How to display the Home button on the iPhone screen

All owners of smartphones with updated iOS can put the button on the home screen. Pulling a key out of the display is easy with dedicated Assistive Touch.

How to display the Home button on the iPhone:

• Open basic settings.
• Go to the accessibility section.
• Find Assistive Touch here.

After clicking on the activating line, the function will work. This is one of the easiest and fastest ways to remove an on-screen button.

For your information! After performing these actions, an icon will appear on the phone display, which has a standard set of actions.

How to disable home button in iphone

Virtual Home Button on iPhone

The virtual button has the following features:

• simplifies smartphone control for people with disabilities;
• allows you to use the screen instead of constantly clicking on the raised button;
• saves the smartphone when a standard key fails;
• provides quick access to the Siri application;
• protects the gadget from wear and tear;
• available for configuration on all phones starting from 3GS version.

To install a virtual button, you need to familiarize yourself with the Assistive Touch add-on

It is this option that is responsible for connecting and removing the softkey. Setting is carried out through the standard iPhone menu. In Accessibility, select “Assistive Touch” to activate the toggle slider. There is a parameter called “Opacity”, which can be adjusted for yourself. In rest mode, it is best to set the transparency to a minimum so that the outlines of the key are not striking during normal use of the gadget.

Next, you need to configure the appropriate actions by selecting them from the list. The most useful functions are configured for button tap, double click, hold and 3D press. You can assign 4 quick actions to one key at once. The following options are relevant: lock the screen rotation, mute the sound, adjust the volume and call Siri.

Note! The virtual button can be placed anywhere on the screen.

What is the Home button, or Home button, on the iPhone for?

Home is the key used to control the smartphone. Customization means enabling or disabling its features and assigning accessibility features. At the moment, “Home” is available on all iPhone models up to 8.

IPhone 7 debuts touch-sensitive Home buttons for the first time

For your information! Often the key is used to return to the home screen, as well as to close third-party applications.

In addition, the user can configure the device under his control. Home on iPhones, in addition to the standard functions, performs the following:

• includes voice control;
• activates software;
• unlocks and launches the widget menu;
• closes applications;
• opens a menu section showing all available applications.

Functional features of the key depend on the version of the operating system

With the release of widescreen models (6 and 6), many users noted that it became more problematic to hold the phone in their hand and reach for the right icons. To make it easier to work with a smartphone, the “Easy Access” function has been introduced. A short touch to the Home key reduces the working area of ​​the screen and slides down for a few seconds.

Note! However, not everyone is starting to use this innovation. In addition, for some users, accidental screen reduction only brings inconvenience, so the “Easy Access” function has to be turned off.

To do this, go to iPhone settings and open the Accessibility menu. Here you should deactivate the switch in the section “Easy access”.

Also in the settings you can adjust the speed of pressing the button. This is especially useful for the elderly, as well as young children who cannot tap at a fast pace. Use the accessibility menu to select the appropriate speed: fast, slow, or very slow.

Users who often hold a smartphone in their hands have noticed more than once that the Siri voice assistant turns on inadvertently. To avoid accidental appearance, it is recommended to disable it through the settings.

How to customize the Home button on iPhone

The user can set convenient settings at any time. To prevent accidental clicks, we recommend that you use Easy Access Disable. The function is designed for people who find it inconvenient to use smartphones with a large display.

Reachability mode allows you to control the gadget with one hand

This add-on is recommended to be used only in extreme cases, and in the usual it is desirable to remove. Turning off the function will reduce the risk of accidental clicks and ensure the correct operation of the phone.

How to decrease the velocity of the click was described above. All manipulations with the “Home” button are carried out through the accessibility settings. Here, the menu contains various functions that you can study and choose the most convenient for yourself.

Note! Multitasking of a button allows you to assign it a triple click that will perform a specific action. You can find out the list of available options through the basic settings. Here you need to find the item “Keyboard shortcut”, which by default is in deactivated mode.

• shades of gray;
• color inversion;
• voice guidance of the interface;
• enlargement of the screen;
• virtual controller;
• Assistive touch.

How to remove the Home button from the iPhone screen

How to remove a button from the screen on an iPhone is a question that interests many users. Removing this feature is straightforward. You need to go to the main settings of the smartphone, go to universal access and click on the square next to the Assistive Touch lock. Thus, you can turn off the key in a few clicks.

Using the Home Button on iPhone with Assistive Touch

Using the virtual button allows the user to adjust the volume of the audio and calls being played, lock the screen, reboot, control the screen with gestures, and customize other functions.

After activating the button, the corresponding icon will appear on the screen. With your fingers, you can drag it to any place that the user will be comfortable to touch. By default, a single click on the button brings up the Assistive Touch menu. To close it, you must press 1 time anywhere outside the main menu.

There are several ways to enable Assistive Touch. The first is to launch it through the settings menu, where the item “Universal access” is selected. In the “Touch” section, check the box opposite the inscription Assistive Touch.

Important! You can use the voice assistant Siri. It is enough to say “Siri, turn on Assistive Touch”, and the application will start.

You can also customize the on-screen button through the “Quick commands” item, which is located in the universal access section. Optionally, Assistive Touch is added to the Quick Commands list. In this case, it is convenient to open the on-screen button through the control point or through the “Home” button.

Assistive Touch can be used in place of various gestures

Thus, it simplifies the management of the notification center, switching programs, and also opens up easy access to settings. The button can be responsible for playing the screen aloud, searching, as well as returning to the main screen.

Assistive Touch is often used instead of the usual button clicks. For instance:

• fast universal access;
• screen lock;
• call a voice assistant;
• restarting the smartphone;
• take an image from the screen (screenshot);
• simulate device shaking.

For your information! The key can be configured for multi-finger gesture control. To do this, go to the on-screen button menu, select “Device”. “” and press “Gestures”. Here you need to select the number of fingers that will participate in the gestures (from 2 to 5). After confirmation, dots will appear on the background of the display, which are responsible for the places where your fingers touch the screen.

The Home button is considered the most versatile in Apple smartphones. It can be used in a standard form or displayed on the screen, which is especially important if the key has become unusable. Depending on the model, the button is presented in mechanical and touch modes. Its purpose and function are changed through the settings.

How to customize the home button on iPhone 6?

• To set up accessibility shortcuts, go to Settings Accessibility Shortcuts and choose the features you use most.
• To use the quick command for accessibility, press the Home button three times.

How to customize the Home button on iPhone 7?

How to customize the response of the Home touch button on iPhone 7

• Open the settings on your smartphone and go to the main
• Select “Home Button” from the list to access response settings
• The system offers 3 different options. Try each one and choose the one that suits you best.
• Leave the settings when you find the recoil force satisfactory for you

How to remove the virtual home button?

One of the options for how to remove “Home” involves the following actions:

• Go to “Settings”. “Advanced settings”.
• On the “Buttons and gestures” tab, opposite the “Hide on-screen buttons” item, move the toggle switch to the inactive position.

How to disable virtual controller if the home button does not work?

Go to Settings Accessibility Switch Control and enable or disable the option you want. On some models, you can press the Home button or side button three times at any time to turn off Switch Control.

How to customize the home button on the screen on iPhone?

How to enable the virtual Home button on the iPhone or iPad screen (Assistive Touch) Open Settings → General → Accessibility → Assistive Touch (in order to quickly find it, scroll down.

How to remove a button from the screen on an iPhone?

How to remove the home button from the iPhone screen?

• Go to “Settings”.
• Item “Universal access”.
• Further to the item “Touch”.
• Find the item “AssistiveTouch”.
• Turn it off.

How to remove buttons from the screen?

• Next. “Advanced settings”.
• Here. “Buttons and gestures”.
• At the bottom of the page, tap on the line “Auto-disable navigation buttons”.
• From the list, select the application in which the buttons will be disabled.
• Click on the name of the application and select “Always Disable“.

How to enable the virtual Home button on the iPhone or iPad screen (Assistive Touch)

Open Settings → General → Accessibility → Assistive Touch (in order to quickly find it, scroll down the screen. By the way, check out how many useful things Apple has invented for people with various diseases!).

After that, a square button with rounded corners and a white circle with circles diverging from it in the center will appear in the lower right corner of the iPhone or iPad display. This is Assistive Touch. Now with its help you can also control your gadget.

If you have the Shortcut keys function active, you can turn Assistive Touch on or off on any screen (lock screen, Home screen, app) by triple-pressing the physical Home button. You can adjust the click speed by going to Accessibility → Home.

You can also activate Assistive Touch with a Siri voice prompt.

Home button on the iPhone screen, or how to turn on and use Assistive Touch

What is Assistive Touch (virtual Home button) for? The feature. one of Apple’s best practices for people with disabilities. allows you to quickly access specific applications and settings using gestures. This is useful when you do not have the ability to use the physical buttons on the iPhone (for example, the lock button or volume buttons are broken, and you cannot fix the breakage quickly).

How to use the virtual Home button on the iPhone or iPad screen (Assistive Touch)

Click on the Assistive Touch button. You will see six icons. Notification Center, Hardware, Control Center, Home, Siri, and User.

As you might guess, clicking on each of them launches the corresponding action. going to the notification center, control point (there are a flashlight, calculator and other tools), simulation of pressing the physical button “Home” and so on.

A few useful commands for the Assistive Touch virtual button

Machine → Screen Lock. lock the iPhone / iPad screen. If you hold the Screen Lock button for a few seconds, you turn off your device. If your power button is broken, it is better not to do this. you can turn on your smartphone or tablet only after connecting it to iTunes via a cable;

Machine → Off / On. sound. switch iPhone out of silent mode;

Apparatus → Louder / Quieter. decrease or increase the system volume;

Machine → → Screenshot. take a screenshot;

Apparatus → → Gestures. select the required number of fingers and bind a certain gesture to it (whatever you want. To create a gesture, you need to move the circles on the screen).

This is how Assistive Touch works on iOS devices. We sincerely wish you never use it. so that you have all good health, and the iPhone buttons work properly. If something happens to you or your favorite gadget, now you know what to do in order to simplify your life.