Table of Contents
Preparing your phone for a factory reset
Before making a Hard Reset Samsung, you need to save all the important information that is on it, otherwise you will simply lose them.
Also, I would advise to be sure to delete the Google profile from the device, which is on it. The whole point here is that the latest versions of Android use a new security system aimed at preventing theft of devices. If you reset the Samsung A50 settings without unlinking your Google account, then after that it will require you to enter a password. If you forget it, it will be a disaster. the phone will not be able to boot into normal mode. Only the service center can help, and then only after the presentation of documents confirming the purchase.
How to factory reset Samsung A50
In the life of almost any modern person at least once, but there is a need to reset the smartphone to factory settings. The reasons are completely different. the device may malfunction or it needs to be prepared for sale. Hard Reset on Samsung Galaxy A50 can be done by absolutely any of you. for this you do not need any specific knowledge, everything is simple and accessible. I will show you two ways to reset the Samsung A50 phone settings, which the manufacturer provides to us. through the operating system or using the engineering menu. Drove!
Factory reset via One UI
The easiest way to “reset” a smartphone to the factory state, for example, before selling, is to use the method built into the Samsung One UI proprietary shell. This is done like this:
Open the smartphone settings, go to the “General settings” “Reset” “Reset data”:
In the last menu we find the “Reset” button and press it. After that, the smartphone will once again ask if we are sure of our actions and if we really want to fulfill our plans. We agree and wait. The whole procedure takes on average 10-15 minutes.
Wipe data on Samsung
This method will help you to reset Samsung A50 to factory settings in cases where the phone does not boot into normal working state. For example, after trying to get Root or installing some “crooked” application. The so-called “Vipe” can help in this case. It is performed like this:
First of all, you need to go to the engineering menu. To do this, turn off your smartphone completely. Then press the volume down button and the power button at the same time. You need to hold for about 7-10 seconds. First, the logo will light up and as soon as the screen goes out, you can release the buttons.
Next, the engineering menu of the Samsung A50 should appear. You can navigate the menu using the volume buttons. We need to select the Wipe data / factory reset item and click on the power button to enter the section:
In the next menu, select the Yes item and again confirm the selection with the “Power” button.
The screen should blink black and after that you will be back in the main menu. Now you need to select the Reboot system now item to reboot the device.
Then you can put your Samsung Galaxy A50 on the table and go drink tea. for the next 10 minutes it will reinstall the system and erase old data. Good luck!
registration on the phone
Check your network connection settings.
Then open: subsection “Settings” → “Cloud and accounts” → “Accounts” (all previously created accounts are displayed here, for example, Google, WhatsApp, Office, etc.).
Select the type of account “Samsung account”.
In the submenu, activate the “Create an account” command again.
- type the full address of your email (must be a working one!);
- come up with and enter a complex password: the optimal combination of 12 characters in length from English letters, numbers and special characters;
- set the date of birth in the column;
- enter your surname and first name;
- upon completion of data entry, click “Next”.
Check the box with a touch of your finger in the line “I accept everything” and run the command “Accept”.
If you have completed all the above operations correctly, a notification will appear about sending an email message to verify your account.
Open the letter from Samsung in your inbox and follow the link “Confirm”.
When the profile activation is complete, exit the menu.
How to create a Samsung account
A Samsung account will undoubtedly come in handy on a phone, a tablet, a TV produced by this brand. What will be useful? It’s simple. A Samsung account provides access to the company’s services:
- software for Samsung Galaxy (Galaxy);
- service for working with multimedia (AllShare Play);
- service for finding and blocking missing mobiles (Find my mobile);
- exchange of data with other users (Family Story);
- base of interactive lessons (Learning Hub);
- instant messaging (ChatON);
- streaming audio (Music Hub).
In addition, through the created profile, you can download official firmware updates specifically for the device you are using, as well as unlock the system.
This article will tell you how to create a Samsung account in two ways. on the phone and through a computer.
registration on the computer
On a PC, the procedure for creating an account is performed in much the same way:
Open your browser (any), enter. https://account.Samsung.com/membership/service/getServieInfoList.do in the address bar. Press “Enter”.
On the “Samsung account” tab, check the “Terms of Use”, “I accept” lines. In other lines (personalization, advertising mailing). optional.
Fill in the fields of the registration form:
- email,
- two times the password to enter (the second field “Confirm”),
- name and surname,
- birthday (set values in the “Day”, “Month”, “Year” lists).
Click the box in the column “I’m not a robot” and complete the required test task.
If the account creation is completed successfully, the message “Congratulations!”.
In email, in a letter from Samsung, use the link to verify your account.
A registered profile in the service. regardless of where you created it (on a phone or PC). can be used on any Samsung device, including a TV.
How to Delete Google Account on Samsung A50 or A51 Phone
Google account in phone Samsung a50 / a51 allows you to buy applications and store melon clouds.
Without it, your smartphone loses many of its capabilities, but if you want to completely remove them from your phone, there are several ways to choose from.
The first method will make sure that no data is left on the phone. photos, saved files, music, settings will disappear the phone will be in the same state as out of the box.
All you have to do is open settings and tap the “general control” option and then select “reset”.
But what if we want to delete our Google account without losing our files? There are two ways.
One, much simpler, includes the Settings menu and then Backup & Accounts. Then select Google. then a list of accounts available on the phone will appear.
Select the account you want to disappear, then just tap the top option, ‘Remove Account. record “and confirm your wish.
The second method is for more advanced users. We need an application that is a file manager, in our case it is the “My files” folder. There you need to find the account.xml file. and render it harmless.
Instructions. how to delete a Google account
Deleting a Google account is as easy as adding (the instructions are also ideal for a20, a30, a40, a60, a70, a80, a90, a10, a71).
Here are the steps to start deleting your Google account from your Samsung a50 or a51 device
From the home screen, swipe up from the center of the display to open the app screen.
Open the Settings app. Click Back Up & Accounts. Click on “Accounts”.
Choose the correct Gmail address. If you have multiple accounts, select the one you want to delete. Click Remove Account. record “. To confirm, review the notification and click “Delete”.
Congratulations! Then you can add a new one or create / register. Hope you find this post helpful. Success.
How to CREATE or ADD Google Account on Samsung phone? Google Account on Samsung Galaxy smartphone
You didn’t like the video. Thank you for sharing your opinion!
Here’s a quick and easy way to add or create a new Google account on your Samsung phone! For example, in order to download and install applications and programs from the Play Market (Play Store) and watch YouTube and so on!
And in order not to miss new useful videos. Subscribe to the channel and like!
I also recommend watching my following videos: I recommend watching “How to DISABLE Xiaomi ADVERTISING COMPLETELY”:
How to CREATE or ADD Google Account on Samsung phone? Google Account on Samsung Galaxy smartphone
And in order not to miss new useful videos. Subscribe to the channel and like!
How to set up a Google account on Samsung a50 phone
Google account allows you to install applications from the market, so it is usually required to create one for everyone.
Without it, your Samsung a50 phone loses many of its capabilities, only it can create problems if you forgot your password.
In most cases, this happens after a factory reset, as Android 9 has built-in FRP protection, a new security method aimed at protecting our data in the event of a phone loss or theft.
On older versions of Android, this prohibition was removed easily, now everything is more complicated. If you get ROOT rights, then in the data / system directory you can delete account.db.
You most likely do not have such rights, but there is a solution for a non-rooted Samsung a50. You do not need to contact the service for help.
Reset Google account Samsung a50 after reset
It sounds a bit absurd, but more than half of people with such problems do not remember the password of their Google account, as a result, they are looking for a way to unblock it.
So I decided to help them. I will demonstrate how to quickly / easily delete a Google account after starting with factory settings.
How to Remove Samsung Account from Samsung A10 SM-A105F, Without password.
The aforementioned factory reset lock requires you to provide the account password that was previously registered on your Samsung a50. on your a20 phone | a30 | a40 | a60 | a70 | a80 | a90 to get rid of Google in this way, you can also.
It should be added that in order to avoid such situations in the future, you must first delete all accounts from the phone before resetting.
If you forget to do this, then later you should expect a request for a password to the account, but if this has already happened, then go here to download a special application (there is also an instruction there).
You will need to install the application from the link on another phone, so take care of it.
After that, it is sent from it to your SMS, only not a simple one, but with the authority of the operator and with a link to YouTube.
Therefore, the Internet must be. Further, after logging in to YouTube, you will have the opportunity to open the parameters and calmly delete your Google account.
From now on you can start setting up your phone without locking Factory Reset Protection.
There are other workarounds, only unfortunately Google is constantly applying fixes to fix any vulnerabilities that could lead to FRP being removed, so the old ones no longer work on newer models.
If you have any questions, feel free to comment. I will always be happy to help. Success.
Samsung А50, display went out
Good afternoon, a friend has a problem: the display on the Samsung A50 has gone out (physical impact), how is it possible to get contacts from it (main), and if all the information is possible. It does not work programmatically when connected to a computer, it shows that the folders are empty. Samsung Case swears, the android version is new, use Smart Switch, downloaded it. Writes that data transmission is blocked. Maybe there is some way?
Community rules
Posts with the repair process are created in the parent community: pikabu.ru/community/remont
In this community, you can post posts asking for help in the repair of electrical equipment. Digital, household, etc., but about the repair of paintings, apartments, baths and toilets, write in other communities 🙂

Maximum full name of the device.
What conditions led to the breakdown, if known.
In the community, only two things are strictly prohibited and punishable by a ban:
For the rest, the main basic Pikabu are valid.
was the password pattern? if yes, then only replacement of the screen (you can connect, pull off the info, and return the screen to the seller)
my supplier returns everything without any problems, so I don’t bother.
So that’s the problem, in the light of recent events, you won’t find it right away. Previously, I went to Mitka, there either the display will be adjusted and the information will be transferred to the right place or simply repaired.
I will reveal a big secret. almost everyone works further, just secretly. go to the repair points, look for pieces of paper with phone numbers.
contacts in Google (if they were not forcibly disconnected) should have been synchronized
There are a lot of such strange people and probably too
Synchronization has been forcibly disabled.
Samsung yyyy lagging, now I’m sitting on Xiaomi I’m not overjoyed))
The device will change unambiguously, and let him decide for himself who is dragging from the apple, I like my 1. The question is about removing contacts from the body. Something is for sure on the SIM card, but what did he put there in the X.Z storage.
Be a chess player think ahead what you will do if your body is in a coma.
The comment is not the right place, I have a triple save. Account, body and two sims, even a quadruple. And an acquaintance is now logged into a Google account, and there is 1 contact.
Samsung A51 reboots
In general, Samsung A-series are breadwinners in services. Samsung has made a budget line for the inexperienced user, some models of which look very attractive. Still. so many cameras are crammed from behind, someone who loves something worthwhile.
But it will not be possible to reduce the cost of production out of the blue, so you have to use a plastic case instead of a metal one. And this, coupled with a thin motherboard, gives rise to a very large number of problems. I don’t know how much goes into their warranty for replacing the board, but a lot of A50, A51, A70, etc. get into post-warranty repair with completely different problems: from reboots and non-switches, to non-working cameras and networks, but with one solution. cpu reballing.
And now Samsung A51 hangs on the splash screen, reboots, sometimes hangs on the charging icon.
We put the board on the lower heating in order to remove the processor, which is located next to the UFS microcircuit and is filled with a little compound, in the most gentle mode.
In such cases, I remove the memory chip along with the process, because they are very close. And due to the fact that the CPU is sufficiently heat-intensive and large, it is unlikely that you will be able to remove it without overheating the memory.
First I remove the flash drive, then the RAM on the processor, and then the percent itself.
Such a disgrace from the remnants of the compound and flux is obtained immediately after dismantling the microcircuits.
But it is worth a little work with a braided soldering iron, then all excess solder immediately disappears.
We process the board from the flux with gasoline and you can proceed to preparation for reballing the microcircuits themselves.
With RAM and UFS memory, there should be no problems.
Everything is simple there: the old solder is removed and solder paste is applied through the stencil, which, when heated with a hot air gun, turns into even balls on the belly of the microcircuits.
There are certain difficulties with the processor, especially if there was no previous experience in reballing with division on old iPhones: a7, a8, a9. Whoever did it already has about what they will have to face. Namely, if this processor overheats a little, then the corners will begin to bend a little and it will not be very easy to install the RAM, because in the middle the balls will stick together, and the edges will not reach the processor. This, of course, can be fixed by grinding the balls on the RAM a little with sandpaper in the right corners.
But there is also a second caveat. In our case, the Exynos 9611 processor and it has a so-called “skirt”, which is a hole made in the plastic case of the processor, from which it is very difficult to clean the old solder mixed with the compound.
But after a little time of patience, you get something like this.
Then these holes are clogged with solder paste.
And neatly, with a small flow of a hair dryer, they heat up so that the resulting balls stick to the base of the processor in these holes. Sometimes balls are formed, but they just dangle inside, then you need to carefully install each ball with a needle and flux, while blowing hot air onto it. The procedure is not simple, I often fail to roll the skirt smoothly the first time, but in 2-3 passes with pasta everything comes out relatively smoothly.
After you have rolled the holes on top of the processor, you can do it from below, but it is much easier, there are no nuances and difficulties.
Samsung Account benefits & How To Create Samsung account in Any Samsung devices
Now the processor, RAM and flash drive are soldered first.
If everything is done correctly, the phone will eventually turn on and work. But at first, most likely you will have to experiment with the size of the balls on the RAM and roll it several times. Those who are accustomed to seeing emergency mode with only the processor installed will be disappointed. these platforms do not have it, so you will have to focus on consumption (if anyone has a power sequence for current exinoses.write please, we will exchange for something useful from me).
Of course, these processors are more difficult to reball than modern qualcomm and kirin sandwiches, but if you learn how to roll this line, then Samsung will throw up work for several years.
What is a Samsung account for?
Acc is needed to access Samsung services, for example, Samsung Pay.
Creating a Samsung Smart TV Account
Installing additional extensions increases the capabilities of the browser. Samsung is offering users access to updates to the company’s dedicated “Smart Hub” application. To do this, you first need to make an account via the Internet. Simple actions will allow you to create an account without the help of others on the Samsung Smart TV and take advantage of the service of all the company’s applications. In the article, we will consider a detailed annotation for setting.
Click here if your Android device is 9, 8, 7, 6, 5
Select Accounts & Backup or Aggregation & Accounts. If there are no such Fri, go to the next step.
Select Add Account.
If this item is not selected, then the account has already been added on this device (you can add only one Samsung account to the device). All added accounts can be viewed in Fri Accounts (5th step).
Accept terms and policies, click Next.
A valid email address; 2. Come up with a password for your account. a combination of English letters, numbers and special characters. A strong password contains more than 12 characters: Zx34_29vdPCW; 3. Surname and name; 4. Date of birth.
Enter your phone number and press Send. An SMS with a code will come to your phone, enter it below. Click Submit.
On devices with Android 7.1 and higher, unavoidable 2-Step Verification is enabled from March 2020. This means that to enter the account, you must enter a password, and later the code that will come in SMS to your mobile phone.
2-Step Verification availability depends on the version of Samsung services that are installed on your device. Therefore, the next step may not be.
If the SMS with the code does not come, enter the number with 8 in front: 89991112233.
Find the email from Samsung, open it and click Verify Account. If there is no letter, check the Trash folder.
The account is verified. Click Close.
If a question about biometrics appears, you can click Not now. You can configure the security properties later.
Click Back. to exit the menu. All is ready.
How to create a Samsung Smart TV account
A Samsung Smart TV account is an electronic account that allows the user to access Samsung Internet services. The accounting system also helps to take into account user preferences and adapt to him (for example, for more effective advertising).
By registering and logging in, you agree to the terms of use and privacy policy. This means that you allow the company to collect information about your actions, purchases, subscriptions, etc.
What you need to create a Samsung account
To create an account, you will need a valid email address: gmail, outlook, yandex or another, and a mobile phone number. You need to know the password from the mail, since to complete the registration, a confirmation letter will be sent to it.
How to Add or Set up your Google and Samsung accounts on your Galaxy A50
Click here if your device is Android 10
Select Accounts and Backup.
Select Add Account.
If this item is not selected, then the account has already been added on this device (you can add only one Samsung account to the device). All added accounts can be viewed in Fri Accounts (5th step).
Enter the email address and password that you provided during registration and click Login.
Review the aspects and policies, check the boxes and click Accept.
Enter your phone number and press Send. An SMS with a code will come to your phone, enter it below. Click Submit.
If the phone number has already been linked, SMS will be sent to it.
On devices with Android 7.1 and higher, unavoidable 2-Step Verification is enabled from March 2020. This means that to enter the account, you must enter a password, and later the code that will come in SMS to your mobile phone.
If the SMS with the code does not come, enter the number with 8 in front: 89991112233.
Ready. Press the Back button to exit.
Can I use another TV?
To this day, it became possible to create an account not only on the Samsung UE55D8000. But you will need to go through synchronization with the server, for this do the following:
- Press the blue button “D”.
- Select the line “Development”, which will be at the end of the list.
- Select the IP setting and enter the server address 80.251.144.40.
- Start sync.
- After the end of the process, you will have the InterstatlPTV application installed.
- Go to the settings menu by clicking on the red “A”, thus, you will exit the develop mode.
- You need to log out of Smart Hub.
- Go to the application again and select InterstatlPTV, start using TV.
- Click on Internet @ TV;
- Open the functions and enter the ID;
- You register the user. develop;
- Then go to “enter”;
- Above and below, enter any 4 numbers. Press enter.
- Click on Smart
- Enter the user as in the previous version
- Confirm.
- Select “menu” on the TV remote control;
- Go to the Smart function;
- Find an account and enter develop there;
- The password will be: sso1029dev !;
- Put on save the password and press enter;
- Exit the menu.
Thus, you can purchase a special TV set for watching Smart TV from Samsung and use simple functions to create an account. Or synchronize your TV with a server from Samsung, then enjoy the quality and quantity of possibilities from modern development.
Option 1. Effective and challenging.
You can use APK apps to unlock Google account on Samsung. This method, we admit right away, is very difficult and time-consuming. As in the previous case, this option is only suitable for Samsung phone models. Detailed guidance on using this method is given below.
- After resetting your Samsung phone to factory settings, wait for the welcome screen to appear, select the required language (Russian) and click on “Start”.
- Connect to your Wi-Fi network, after which you will be asked to enter your Google account details.
- In the field for entering your e-mail, enter any text, then press and hold it to select and go to the “Keyboard settings”.
- Next, select “About Samsung Keyboard” and open “Open Source Licenses”.
- On the agreement page in the dialog box, click on the three dots, select “Search the Internet”, after which your request will be rejected.
- Go back to the beginning and click three times on the “Home” button.
- The Talkback training menu will open, where you need to draw a large English letter “L” on the screen.
- After that, a general context menu will open, where you need to select “Talkback Settings”.
After going to settings, press the volume up and down buttons at the same time, a dialog box will pop up asking if you want to suspend the Talkback function. Click “OK”.
Go to Device Administrators and disable Find My Device.
Select the “Add Account” option. Select “Google” from the list of available options. The “Failed to sign in” window will appear, select “Next”.
Go back to Settings and open Other Security Options. Go to “Device Administrators” and activate “Android Remote Control”.
Go to Settings, open the Software Information menu. Find the item “Build number” and click on it 7 times. Go back to Developer Options and in the dialog click Accept.
How to Bypass Google Account on Samsung
The following is a guide to the main way to unlock a Google account on Samsung. The whole process begins after successfully restoring factory settings on your Samsung phone, after which you will need to follow the steps below to bypass Google account lock. Please note that this method works only for Samsung phones, it does not work on devices from other manufacturers.
- After resetting your phone to factory settings, restart your device.
- Select the required language (Russian) and connect to your Wi-Fi network.
After the screen for entering your Google account and virtual keyboard information appears, press and hold the “@” key to go to the settings menu.
After that, go back to general settings and open the “Developer options” menu. Activate the option “Unlocking pref. manuf. OEM “and then click” Back “twice.
Ways to Unlock Google Account on Samsung
Recently, the smartphone has become the focus of important information about the owner of the device: it contains his personal files, bank card data, phone numbers, text and voice messages, logged into accounts of various social networks, etc., etc. Therefore, protecting access to this data becomes a top priority for every phone owner. In daily use, this is ensured by the presence of a screen lock password in any of the possible ways (password, pin code, graphic drawing, fingerprint). If your phone is lost or stolen, you can use the Find My Device function (provided that it is activated). However, a few years ago, Google took to a new level of organizing the security of users’ personal data and protecting their devices. The company introduced the FRP lock function, which will be discussed later in our article.
What is FRP lock
Factory Reset Protection (or FRP lock) in English means “protection from reset to factory settings.” This function is the need to confirm the data of the Google account synchronized with this device after the phone has been reset to factory settings. Now, if you lose your phone or become a victim of theft, attackers will not be able to bypass your lock password by restoring the factory settings and, therefore, will not have a single chance to somehow use your phone.
However, if you bought a hand-held phone and cannot contact the seller about unlocking the purchased device, or if you forgot your own Google account password, you will have to look for ways to bypass Google Account (FRP). Next, we will analyze several ways to bypass Google Account on Samsung.
Option 2. Effective and simple
The above methods can easily scare any user with the complexity of the descriptions and the sheer number of actions that need to be taken to unlock a Google account on Samsung s7 or any other phone model from this manufacturer. Fortunately, Tenorshare has introduced a program to the software market that allows you to solve this issue no less quickly, but most importantly. without the need to delve into complex technical operations. All you need to do is follow the program prompts and press the required interface buttons. As simple, fast and efficient as possible. these are the key features of Tenorshare 4uKey for Android.
So, to remove FRP lock after factory reset on your Samsung phone, follow further instructions.
Step 1 Download the installation file of the program from the official website of the developer and install it on your PC. Launch the program and connect your Samsung phone to your computer using a USB cable. In the main menu of the program, select the option “Remove Google Account Lock (FRP)”.
Attention: Before taking any further action, please read the important information:
- Your phone’s operating system will be updated to the latest available version.
- For normal operation, the battery charge of your phone must be at least 50%.
- The USB cable must be securely and correctly connected to the phone and PC.
Step 2 After the program recognizes the device, click Start uninstall
Step 3 Download Bypass FRP APK and install Bypass FRP APK on your phone according to the instructions in the program window.
Step 4 Set the unlock pattern and Restart your phone
In newer versions of Android OS, you will need to verify your Google account after every factory reset. This feature provides Samsung phone owners with additional protection against intruders, but at the same time, it is a cause for their concern. If you don’t know how to bypass FRP protection on your own Samsung phone, then in our article you will find a detailed description of the best ways to take back control of the device.