How to control a Samsung TV without a remote control?

connect, remote, samsung

Any modern Samsung TV model is equipped with a remote control (RC). Due to the high sensitivity of the sensors installed on the devices of this brand, the TV can be controlled with the remote control from a long distance. At the same time, even without the strict aiming of the remote control at the receiving panel of the device.

But it may happen that it will be impossible to control the television panel using the remote control. The remote control may get lost, broken, or the batteries may be discharged. If the repair of the old one or the replacement of the new one cannot be done at the moment, then you can manage the settings without it.

How to control a joystick?

The latest models of Samsung plasma panels, instead of the usual set of keys for manual control, are equipped with only a lever with one button. It’s called a joystick. It is very easy to operate the TV settings with the joystick button. The device of such a control lever is a large flat button on a small foot that can rotate in any direction. When moving the joystick, you need to follow the prompts on the screen and when the desired item appears, you should:

  • press the center of the button if you need to enter the menu or confirm the changes made;
  • press the upper edge of the key to switch the channel number upward or move upward through the menu items;
  • press the bottom edge of the button to switch the channel number downward or downward in accordance with the menu items;
  • press down on the left edge of the key to decrease the sound;
  • press the right edge of the button to increase the volume.

When operating the TV with a joystick, you need to be careful, and when you press, pressure should be applied directly to the center of the button.

If the movements are not clear, the pointer may jump over the desired point and the control system will work incorrectly.

connect, remote, samsung

Controlling buttons on the panel

Each TV has a control panel. Depending on the model, it is located in front or on the side, rarely. behind the device. The control panel, located on the TV body, is a dedicated part that is equipped with several buttons. Each button has specific icons and legends.

If the control panel is located at the front, then it is most often hidden. To start operating the TV settings in manual mode, you need to remove or flip the cover from the buttons by slightly pressing it.

Before you start using, you must carefully study all the labels and symbols located near the buttons. The standard panel, which is equipped with almost all popular models of Samsung TV receivers, is located at the front of the device in the lower right corner.

The control system includes the following buttons.

  • POWER. By pressing this button, you can turn on or off the TV.
  • MENU. Pressing this key enters the device menu. From the menu it is possible to adjust the brightness, contrast, and other necessary parameters.
  • OK. Confirmation button. By selecting the desired menu item or setting parameter and then pressing OK, the change made is confirmed and saved.
  • VOLUME. There are usually 2 buttons under this label. One with a “-” icon and one with a “” icon. With their help, you can reduce or add the sound emitted by the device.
  • CHANEL. This key is necessary to scroll through the channels. There are also 2 buttons under this label, which allows you to switch channel numbers either upward or downward.

If your TV model assumes that the keys are located on the side or rear panel, their functions will be the same as the keys located on the front panel, so the operation will be identical.

connect, remote, samsung

Mobile phone use

You can also customize your TV without using the remote control using your mobile phone. Not all Samsung LCD panel models have this functionality. For this type of control, you need to install a special program Samsung TV Remote on your smartphone.

connect, remote, samsung

The TV must also have a set of certain functions:

  • the presence of Wi-Fi;
  • Smart TV function.
  • the presence of an Ethernet port;
  • the remote control function on the mobile device.

If all of the above conditions are met, you need to launch the application installed on the phone. In the proposed interface, 2 screens will appear on the screen of the mobile device. One of the fields will contain buttons with channel numbers. And by going to the second field, you can manage the menu items.

connect, remote, samsung

The designation of the keys in such a mobile application is the same as on the remote control or on the TV panel. Therefore, management will not be difficult. The advantage of this type of control is that you do not need to point the mobile device at the TV. you can even change channels from another room.

Thus, you can watch TV even without a remote control. And several proposed control options will help you choose the most suitable one in a particular situation.

How to control the TV using your phone, see below.

Automatic

To quickly connect the universal remote to your Samsung TV, and follow the guide:

  • enter the combination 9999 on the remote control and after the fourth pressing of the nine, hold down the key;
  • then wait until it turns off completely and turn on the TV again;
  • direct the source of control to him;
  • press the power key, and hold this key;
  • when the volume icon appears on the screen, click to increase or decrease the sound level;
  • if there is a reaction, then the setting was successful.

If you don’t get the result, try repeating the action a few more times.

Manual

connect, remote, samsung

If you have any questions or complaints. please let us know

The manual method is more time consuming, because you have to wait for the indicator to work and specify some parameters;

  • turn on TV;
  • simultaneously hold down the “C” and “Setup” keys;
  • release after about 5-7 seconds when the indicator light responds;
  • enter the code in the window that opens (you can find it in the instructions)
  • confirm the action;
  • test the functionality, check with the volume keys.

How to set up a universal remote control for a Samsung TV: codes, instructions

How to set up a universal remote for a Samsung TV? The universal control element is increasingly used for contact with home appliances, as it is simple to set up and easy to replace in case of loss or breakdown. However, not all users know how to debug, and what to do to start working with TV. This article provides not only a guide, but also an alternative way to control the technique.

connect, remote, samsung

No code

There is only one option for pairing without code. automatic debugging. It is also possible to use an alternative source. a smartphone. Benefits of smartphone control:

  • fast connection;
  • no password required;
  • multifunctionality. it is allowed to configure it to several TVs and other devices at once;
  • available on almost all phones.

Setting up a universal TV remote control for Samsung TV

connect, remote, samsung

Debugging can be automatic or manual. If the user wants to establish contact without a code, then the automatic method should be chosen.

  • Automatic. quickly starts scanning and automatically detects the contact. The advantage is that you do not need to search for a pairing combination and enter something manually.
  • Manual. for manual pairing, you will need to specify some parameters.
READ  Samsung a 50 how to unlock the screen

How to find the TV code

To find the Samsung TV code for the universal remote control, you should look at the instructions (paper or electronic version on the manufacturer’s website). It is also possible by the selection method to enter general combinations 0021.0061.0151.0291.0301.0331.0391.0661.1021.0931.1391.1401.1571.1081.2511.

For each model, these combinations are different, so you need to clarify on the official resources of the manufacturer.

Smartphones with universal remote function

This is a special pre-installed software that almost every smartphone owner has. It works through an infrared port, which connects to equipment. In just two clicks, a connection is established and the signal is tested.

Malfunctions and their elimination

If you purchased a device and it does not function, the first step is to follow these steps:

  • Read the instruction manual carefully;
  • Make sure the device is compatible with this TV model;
  • Disconnect the batteries and put them back;
  • Remove the power plug from the outlet, wait a couple of minutes, plug it back in and turn on the TV.

The disadvantage of Samsung Smart Touch remote control devices is that repairs are not carried out in official service centers. The cost of the original remote control sometimes reaches a third of the cost of the entire TV set. Therefore, most users try to repair the remote themselves. A common problem is that the rate of discharge of the batteries gradually increases, and eventually the remote does not work at all even with new batteries. This is facilitated by the malfunction of the capacitors at the positive input. To solve the problem, you can simply remove them, but this does not guarantee the safety of use, however, without them, the remote control will begin to function normally.

How to choose a remote control for your Samsung Smart TV

At one time, Samsung Smart TV technology was revolutionary in the field of televisions. This is a very creative and interesting decision of the company. It contains a large number of functions that are now indispensable. For the correct functioning of this function, you need a good Internet connection, therefore the company installs good equipment in TVs with Smart TVs to ensure high speed Internet. For more comfortable control of this technology, you can use special pointers, which are distinguished by great functionality.

Smart TVs are essentially multimedia platforms. For their manufacture, the most modern technologies are used, which allow to achieve maximum indicators of image and sound quality. This contributes to the fact that the cost of these devices is quite high. You need to choose a device based on your requirements and for a specific TV model. There are push-button and touch-type devices. If you have any problems setting up or using the Smart Remote Control, look for a solution on the Internet, or contact your hardware vendor.

  • Push-button device type. The main advantage is that there is no need for customization. It can be used immediately after installing the batteries in a special compartment. It can connect to multiple devices at the same time. Thanks to this, the keypad is universal. It is also often chosen for its ease of operation, as well as for its low acquisition cost.
  • The touch type has a more complex connection process. Insert the batteries first and press the power button. After that, hold down the “RETURN” and “GUIDE” keys for a few seconds until the “bluetooth” icon appears. The appearance of this notification indicates that the device is paired with the TV. The remotes supplied with the TV only work with this unit.

Important! Before purchasing a universal remote, please make sure that it exactly matches your TV model.

Remote control settings

Samsung Smart Controls are touch-sensitive devices that allow you to control TVs from a distance. They are bundled with Samsung TVs in which the Smart TV function is present and they were released after 2012. He is able to control not only the TV, but also the set-top box that is connected to it. It can also be used as a Blue-Ray player control device. It has a voice control function with which you can increase or decrease the sound and perform other actions without touching the remote control.

connect, remote, samsung

This remote has a touchpad

The main advantage of this remote control is the touch-sensitive touchpad located on the front side and occupying 40% of the area. It allows you to easily configure the TV, comfortably navigate the TV menu and in the browser. Touch panel for maximum comfort and ease of operation.

Connecting a proprietary Smart Touch Control

Smart Touch Control is a remote control equipped with a touch panel and microphone. Thanks to the branded accessory, the user can simplify navigation through the “smart” menu and the process of searching for information on the Internet.

Synchronizing Smart Touch Control with your TV looks like this:

  • Installing two AA batteries in the accessory case.
  • Turning on the TV by pressing the “Power” button located on the remote control.
  • Pressing and holding the Back and Play keys for a few seconds.
  • An indicator of the pairing process will appear on the TV. the user just needs to wait until the connection is complete.

In some cases, it may be necessary to restart the TV to successfully sync devices. It is important to note that the process of connecting the Smart Touch Control may differ from the presented algorithm. the exact sequence of actions depends on the series of the television set.

Below are the main differences between the touch remote control and the classic one:

  • STC can only sync with one device;
  • the remote control is supported only by those models of television devices that come with a similar accessory;
  • for the remote control to work, a special device setting is required.

Externally, ST Control differs from the usual Samsung remote in the touch keys for navigating the menu and the physical button to start the voice search. You can find more detailed information about the branded accessory on the official website of the manufacturer.

How to disassemble Samsung remote

Sometimes there are situations when, when trying to switch a channel, the TV reacts only after a few clicks. Often, this phenomenon occurs when the remote control is clogged with food, or jellied liquids. As a result, it becomes necessary to disassemble the Samsung remote control and clean it from dirt.

  • The first step is to inspect your Samsung Smart TV remote to find all the fasteners. Often they are located not only on the outer surface of the remote control, but also in the battery compartment. Usually fastening is done using small screws, which can be unscrewed with a Phillips screwdriver.
  • Next, you need a plastic card. It must be inserted into the corner of the device, and the lid must be tucked. After that, tell you you need to walk it around the console. This must be done carefully so as not to damage the latches. Then gently pull the battery contacts out of the mounting slots.
  • The next step is to understand how the board is attached to the back cover surface. If the fastening is made with screws, then they must be unscrewed with an appropriate screwdriver. If it is fastened with latches, then you must carefully open them.

Pay attention to the location of the infrared diode in the corresponding socket. If it is fixed, then it must be carefully released from the seat.

How to bind the remote to your Samsung TV

Samsung Smart Control is a touch-sensitive remote control for your TV, the owners of such a remote control are buyers of Samsung TVs with Smart TV function. In addition to the TV itself, it can control additional devices that are connected to your TV. Using the remote control, you can switch channels to adjust the sound. Also, these remotes have a microphone for voice control of the TV.

When connecting the remote control. it should be at a short distance from the TV the connection is via the Bluetooth function.

In order to set up and connect the remote control to the TV M, Q, LS-series

Installing batteries in your remote control.

Next, press and do not release the return and “Play / Stop” buttons return for a few seconds until Search for devices appears on the screen and wait for your remote to connect to the TV.

To set up and connect the remote control to a J-series TV

It is necessary to press and not release the “RETURN / EXIT” and “EXTRA” buttons for several seconds. until the Bluetooth icon appears on your TV screen

In order to set up and connect the remote control to the K series TV

In order to set up and connect the remote control to an H series TV

READ  How to enable sound mode on Samsung

Press and hold the buttons for a few seconds

“RETURN” and “GUIDE” until you see the Bluetooth icon on your TV screen

To set up and connect the remote control to an F-series TV

Next, on the back of your remote control, find the “Pairing” button. You need to press it and do not release it until you see the bluetooth icon on your TV screen, which means that the devices are connected to your TV.

If you are unable to connect your Smart Touch Control to your TV, please make sure you are using the supplied model. Try to repeat the steps again, unplug your TV and plug it in again, check if the batteries on your remote control are working properly. Remember that each Samsung TV has a different remote control model.

For one reason or another, a complete remote control may not satisfy user needs: for example, an out-of-the-box accessory is not always convenient for web surfing on Smart TV or has a short range. Also, the remote control may fail and even get lost.

After purchasing a new device, the user must synchronize the device with the TV. Here’s how to bind your new remote control to your Samsung TV.

Also, the article will discuss the use of iPhone and Android smartphones as a means of remote control of a television set.

How to bind the remote to a Samsung TV

To connect to a TV and set up a universal remote control, you will need:

  • Activate TB using the buttons located on the side panel.
  • Disconnect devices in the vicinity of the TV that may also be compatible with the existing remote control.
  • Install batteries of the required format into the case of the remote control and point the device towards the TV display.
  • Hold down the TV power key located on the accessory.
  • Wait until the end of automatic pairing of devices. During this process, the user must hold down the previously held down button.

When the synchronization is complete and the TV reboots itself, a notification about the end of the setup will appear on the screen.

It is important that the user should release the pressed key only after the system message appears. The connection process will take no more than 15 seconds, then the remote control will be ready for use. It is recommended to study the operating instructions supplied with the new remote control. this document may contain information about the hidden features of the accessory, which will be useful in controlling the smart functions of the television device. It is worth noting that Samsung branded remotes are able to connect to the TV automatically after installing the batteries. the user does not have to hold down any keys and disconnect the electronics located next to the monitor.

You can find the original remote control on the Internet by the accessory model code number or the serial number of the TV-set.

Functionality of Smart TV technology

In this video, you will learn more about this remote control:

How to set up a remote control for a Samsung TV yourself?

connect, remote, samsung

Currently, the TV remote control is an indispensable attribute. Manufacturers produce many devices that are designed for different models of TV sets. Most of the remotes are universal and suitable for several types of devices. In this case, we will focus on universal control devices for Samsung TVs. Detailed instructions on auto tuning and self-manual tuning can be found in this article.

connect, remote, samsung

Auto tuning

Setting in automatic mode is suitable for those users who do not want to search for pairing codes, or if the search for the code did not return any results.

connect, remote, samsung

Auto setup for Supra devices:

  • turn on the TV set and point the remote control at the TV screen;
  • hold down the Power key for 5-7 seconds;
  • then the LED will light up;
  • press Power again;
  • the volume bar icon will pop up on the screen, this indicates the correct completion of the setup process.

connect, remote, samsung

Auto setup for Huayu devices:

  • point the remote control at the TV screen, hold down the Set button, and then Power;
  • wait a couple of seconds and release both buttons;
  • click on Power;
  • the volume scale that appears on the TV screen indicates the successful completion of the setup;
  • to exit the mode, you need to press the Set key twice.

Auto setup for the “Beeline” remote control:

  • hold and release the TV key;
  • press the OK button and hold it for a while;
  • after automatic search for the code, the TV receiver will turn off;
  • release OK button.

Auto tuning for Gal remote:

  • point the device at the TV receiver, press the device type key and hold for 3 seconds;
  • as soon as the LED lights up, the button must be released;
  • press the power key to automatically search for the code;
  • as soon as the TV receiver turns off, you must quickly press the OK button, this will save the settings in memory.

connect, remote, samsung

There are several more auto-tuning algorithms for some remotes:

  • turn on the TV and hold down the TV button until the indicator lights up;
  • press and hold Mute to search for a code;
  • you need to wait for the process to complete and check the result, to do this, just press the volume key.

Another option for auto tuning.

  • Direct the remote control to the TV receiver and press the TV and OK keys. You need to hold down the keys for a while. Then all keys on the remote control will light up. It is necessary to wait until the moment when only the buttons with numbers are highlighted.
  • To save actions, press the TV key.

There are touchscreen remotes for Samsung TVs with Smart technology. Control devices come with a TV receiver. Touchscreen remotes can also be purchased separately. To configure you need to follow these steps:

  • point the remote control to the TV and hold down the Return and Guide keys for a few seconds;
  • the Bluetooth icon should appear, this notification says that the connection was successful.

Many users complain that this kind of touch control fails quickly. For Samsung Smart TV models, you can also use universal button remotes.

Manual configuration instructions

To configure the universal remote control manually, you must first find out the code from the TV receiver model. When you enter the code, the devices are paired. If the code is known, then the procedure for the next.

connect, remote, samsung

  • turn on the TV receiver and point the control device at it;
  • hold down the Power key;
  • enter the code;
  • after double blinking of the LED sensor, release the button.
  • point the remote control at the TV receiver and hold down two buttons. Power and Set and wait for the LED to blink;
  • enter the code;
  • press the Set key after the light sensor goes out.
  • to pair, press the TV button;
  • point the remote control at the TV receiver;
  • hold down Setup until the LED blinks twice;
  • enter the code;
  • if the devices are successfully paired, the LED will blink several times;
  • to check the control, you must press the volume key.
  • press the TV button and hold it until the LED flashes;
  • release the key;
  • enter the code;
  • after entering the code, the TV will reboot.

connect, remote, samsung

Possible malfunctions

Some problems may occur when using the Samsung TV universal remote control. If it does not work when buying a new device, then you must first carefully study the instructions for use. In the absence of pairing, the reason for the incompatibility of the remote control and the TV model may be hidden.

If the devices are compatible, remove the batteries and reinstall. You can replace the batteries with new ones. Fast battery drain can also be a minor problem.

connect, remote, samsung

It is better to buy rechargeable batteries, they can be charged several times. This will save a lot of money.

To prevent minor problems, before pairing devices, you must disconnect the TV from the power source, wait a few minutes and then turn it on again. If the manual tuning is done correctly, but the remote control still does not respond to the TV receiver, you need to perform all the steps again. The user may not have entered the code in time. It is important to know that the code must be entered within 1 minute.

Continuous flashing of the LED on the remote control indicates an incorrect setting. To fix the problem, you need to turn off the TV and turn it on again after a while. Then re-configure.

In the next video, you will see an overview and connection of a universal remote to a Samsung TV.

READ  How to Unblock Channels on Samsung TV

Setting up your Samsung remote

Samsung Smart Control is a touch-sensitive remote control for your TV, the owners of such a remote control are buyers of Samsung TVs with Smart TV function. In addition to the TV itself, it can control additional devices that are connected to your TV. Using the remote control, you can switch channels to adjust the sound. Also, these remotes have a microphone for voice control of the TV.

When connecting the remote control. it should be at a short distance from the TV the connection is via the Bluetooth function.

In order to set up and connect the remote control to the TV M, Q, LS-series

Installing batteries in your remote control.

Next, press and do not release the return and “Play / Stop” buttons return for a few seconds until Search for devices appears on the screen and wait for your remote to connect to the TV.

To set up and connect the remote control to a J-series TV

It is necessary to press and not release the “RETURN / EXIT” and “EXTRA” buttons for several seconds. until the Bluetooth icon appears on your TV screen

In order to set up and connect the remote control to the K series TV

In order to set up and connect the remote control to an H series TV

Press and hold the buttons for a few seconds

“RETURN” and “GUIDE” until you see the Bluetooth icon on your TV screen

To set up and connect the remote control to an F-series TV

Next, on the back of your remote control, find the “Pairing” button. You need to press it and do not release it until you see the bluetooth icon on your TV screen, which means that the devices are connected to your TV.

If you are unable to connect your Smart Touch Control to your TV, please make sure you are using the supplied model. Try to repeat the steps again, unplug your TV and plug it in again, check if the batteries on your remote control are working properly. Remember that each Samsung TV has a different remote control model.

Supra

This device is a popular model for adjusting Samsung, LG, Philips TVs and other TV receiver models. The installation algorithm for Smart TV and older models is the same.

Automatic tuning

Adjusting the remote control device is quick and convenient. The process of automatic debugging of the UDP with a receiver is as follows:

Upgrade Samsung Smart TV to Smart Remote Control. Activate and pair Smart Voice Remote Control

  • Turn the screen on.
  • The remote control must be pointed at the TV.
  • Press the “POWER” button for 6 seconds until the indicator on the UDP lights up.
  • When pairing is successful, the “Volume” icon will be displayed on the screen. Press the “POWER” button once.
  • The UDP is ready to use, you need to check its performance.

What is a universal remote

The universal remote control (UPDU) is a small, simple-looking device. Contains a microcircuit inside that allows you to simultaneously generate signals of different pulses.

Quite a lot of UPDU models are presented on the market, which differ in configurations, price, appearance and control codes. The most popular models are Supra, Huayu, Beeline.

Codes for setting up a universal remote for use with a specific TV can be found in the document below.

The algorithm for connecting the PU to Smart TV and older set-top boxes is no different. There is no need to look for how to set up a universal remote control for a Samsung TV, or find out at service centers how to set up a universal remote for an LG TV, since the process of adapting a remote control to your equipment does not depend on the manufacturer of the receiver.

Self-configuration of a universal TV remote control

For the convenience of watching television on multiple screens, users purchase a universal control device. However, most are faced with the problem of setting it up. How to set up a universal remote for a TV? Debugging the device will not take much time, but it will allow you to conveniently and simply watch several TVs at the same time

connect, remote, samsung

How to set up a universal TV remote control

To set up a universal remote control, use the following universal instructions for different brands of TV. Necessary:

  • Find out the TV code. This will allow you to program the remote for a specific TV model. It can be found in the data sheet of the device or on the manufacturer’s website. If you cannot find the code, use the automatic adjustment function of the remote control, which allows you to select the desired combination of signals.
  • Turn on the TV and press the “TV” mode on the remote control until the light comes on.
  • choose one of three types of settings. automatic, manual or no code.

connect, remote, samsung

  • Put the remote control in auto-tuning mode. to do this, hold down the SET button for 4-5 seconds and wait for the indicator signal.
  • Point the remote towards the IR receiver at the TV. It can usually be found from below.
  • The remote will pick a command for the POWER button using a different set of commands. Your task is to press the “OK” key in time when the TV turns off and on. This means that the remote control has recognized the signals.
  • Turn on the remote control using the POWER button, if there is a light indicator, it will light up.
  • Hold the SET button for 4-5 seconds to switch the remote control to programming mode.
  • Enter a 4-digit code using the keyboard.
  • Click OK.
  • Check if the TV responds correctly to commands.

4-digit codes may differ from TV to TV, here is a list for most popular models:

TV model Code
Astra 0221
Cameron 4032
Condor 0627
Alcatel 0089
Casio 0499
DAEWOO 0692
HiSense 1249
Nokia 1407
Lg 1628
Philips 2195
Siemens 2154
Samsung 2448
Sony 2679
Toshiba 3021
Xbox 3295

You can configure the remote control without a code. For this:

  • Start TV and hold down the TV and OK buttons on the remote control. The number buttons should light up.
  • Scroll the channels slowly with the CH button. Then the TV should turn off.
  • Then check the setting you made.

Different manufacturers have their own peculiarities of setting up a universal remote control.

Samsung one remote control pairing. RESET

In TV before 2017, only remotes with an IR sensor can be used. After the transition of TVs to Android, you can use any remote controls, as well as an application for smartphones. There are 2 sets of commands for TV.

Modern Sony TVs allow you to add multiple remote controls via infrared or Bluetooth signals.

Samsung

Samsung remotes have 3 generic command sets. For basic, enter the combination 2448. For TV with multimedia functions. 9948, which give access to additional buttons.

Samsung needs universal remotes until 2012 because they use different command sets.

The instruction set is similar to Philips. Those. if auto-tuning is not possible, you can enter the code 2195, while most of the buttons will work normally.

HUAYU

It is possible to pair this remote control with any TV, be it an old Philips or Samsung of the latest model. The screen pairing process is the same:

  • Press the “POWER” and “SET” buttons on the HUAYU, which enters the UDP into the programming mode. When the equipment is paired, the indicator on the remote control will be constantly lit.
  • The command is set by the “VOL” button.
  • You can exit the setup mode with the “SET” button.

Remote control devices from this manufacturer are suitable for controlling LCD and LED TVs. Such a scheme is suitable for setting up remotes from Unimak, which are also quite common among buyers of remote controls.

Manual adjustment

If the described method of adjusting Supra did not help, and you still cannot control the TV through the remote control, there is also a manual setting of the universal remote control for the TV:

  • In this document, we select the code corresponding to the model of the TV signal receiver.
  • We connect TV to the network.
  • Direct the UPDU directly to the screen.
  • Clamp “POWER”, enter the previously found code.
  • Do not release “POWER” until the indicator blinks twice.
  • Trying to check each of the buttons on the remote control. If some of them do not work, then you will need to find another code.
BYRGPUB.COM 2021