How to connect the soundbar to the TV via HDMI and without wires

TV manufacturers, especially budget, are not particularly trying to make sound quality. Their main task is an image, and the demanding quality of the audio buyer will take care of the surround sound. For example, will additionally establish a “home theater” type system, which consists of five columns, subwoofer and amplifier. But all this must be folded and correctly arrange. At the same time, the cost of one subwoofer may be unpleasant to surprise.

Before you independently connect the Soundbar to the TV, you need to consider several important points:

  • Basically, the connection of sound equipment to TV does not cause special difficulties. But in some cases there are problems with sound due to poor quality jack with a plug. Here the problem usually lies as components themselves, or in a trite not completely inserted by the plug.
  • Some new beginners disrupt the sequence of plug-in cords. Repeatedly experts who came to revenue saw how the green plug for some reason is in a red nest, and white in black. If you break a sequence, the system is simply silent, and no sound will appear. Exactly until the plugs are inserted into their sockets in the Soundbar.
  • The reason for the sound impairment can sometimes be covered in hardware, but in software malfunctions. Basically, users connecting the Soundbar to the computer are faced with. But the software failure on TV is not uncommon. Sometimes the problem is solved by a simple reboot, updating either full flashing if the situation is serious.
  • Sometimes the sound is turned off if electricity is turned off. With the subsequent inclusion of the TV Soundbar is silent. In this case, it is recommended to restart the system, re-enter the settings. Sometimes the simplest procedure helps: the instrument is turned off from the outlet for 5-10 minutes and turns on again. After that, the performance is restored.

With such problems when connecting high-quality saubbars, users rarely face. But exclude the likelihood of their appearance is not worth.

Sony HT-SF150 Operating Instructions Online. Page 28

Sony HT-SF150 instruction for the Soundbar device contains pages in Russian.

You can download the PDF file of this instruction: Download PDF

Connect it again. Make sure the cable is inserted secure.

The system does not play sound from the TV.

HDMI cable or digital optical cable connected to the system and TV (see. The accompanying guide to the start of work).

the system, after which you securely connect them. Disconnect the TV power cables and systems from the outlet (electrical network of AC), after which connect them again.

Connected using the HDMI cable, check the following.- HDMI connected jack

AUDIO RETURN CHANNEL, connect the digital optical cable (attached) (cm. The accompanying guide to the start of work). If the TV is not compatible with Audio Return Channel, the TV sound will not be displayed through the system, even if the system is connected to the HDMI in the TV jack.

The TV connected to the optical login jack is not displayed, do the following.

Or satellite television directly to the TV IN jack (Optical) system.

TV connections and systems, system sound can be disabled. If this happens, first turn on the TV and then the system.

TV speakers (BRAVIA) meaning “audio system”. To familiarize yourself with the information on the order of the TV setup, see. TV Instructions.

TV. TV settings see. In the instruction manual of the TV.

Dolby Digital and PCM audio formats (page. 35). When playing an unsupported format as a digital TV audio output (BRAVIA), use “PCM”. For more information, see. TV Instructions.

The sound is reproduced simultaneously by the system and TV.

The system does not reproduce the sound from the connected device or it is played very quiet.

Views of Soundbarov

The market presents a huge range of systems from various brands. Each monophonic column has broadband speakers. Thanks to the original, oblong case, place the saunbar in the room is quite simple. The device can be determined on the wall under the TV by using a special holder.

Active panels in contrast to passive can be connected directly to the television receiver. It is worth considering that the latter requires the presence of a receiver to communicate with the screen, which is included in the audio system of this type.

Depending on the functional features of the saunbars are in the form:

    Monocolones equipped with a built-in subwoofer. Such active devices are highlighted in an inexpensive cost. The audio system provides only the most necessary functions for operation, use it to replace acoustics on TV. The advantage of such a device is the possibility of connecting to a computer, mobile phone, laptop.

Soundbar: how to connect to tv and computer

Among the most popular devices mark:

    Soundbar Yamaha Yas 108. The audio panel has 4 connection options: analog, via Bluetooth, HDMI, digital optical. The device is equipped with two 5.5 cm of LF speakers with conical diffusers, two 7.5 cm built-in subwoofers, and two 2.5 cm HF speakers with dome diffusers. In addition, it is possible to further connect an active subwoofer. The model has 120 W power. In the case of compatibility, Yamaha YAS 108 with a TV can be used to control the remote control from the TV. It is possible to place the device on the wall due to the available holes on the back of the housing of the keyhole type.
See also  How to connect honor to a Samsung TV

Views of Soundbarov

The market presents a huge range of systems from various brands. Each monophonic column has broadband speakers. Thanks to the original, oblong case, place the saunbar in the room is quite simple. The device can be determined on the wall under the TV by using a special holder.

Active panels in contrast to passive can be connected directly to the television receiver. It is worth considering that the latter requires the presence of a receiver to communicate with the screen, which is included in the audio system of this type.

Depending on the functional features of the saunbars are in the form:

    Monocolones equipped with a built-in subwoofer. Such active devices are highlighted in an inexpensive cost. The audio system provides only the most necessary functions for operation, use it to replace acoustics on TV. The advantage of such a device is the possibility of connecting to a computer, mobile phone, laptop.

Among the most popular devices mark:

  • Soundbar Yamaha Yas 108. The audio panel has 4 connection options: analog, via Bluetooth, HDMI, digital optical. The device is equipped with two 5.5 cm of LF speakers with conical diffusers, two 7.5 cm built-in subwoofers, and two 2.5 cm HF speakers with dome diffusers. In addition, it is possible to further connect an active subwoofer. The model has 120 W power. In the case of compatibility, Yamaha YAS 108 with a TV can be used to control the remote control from the TV. It is possible to place the device on the wall due to the available holes on the back of the housing of the keyhole type.

Why the tv sees no saunbar?

If the TV does not see the Soundbar, and the sound is still heard through the standard acoustics, you need to go to the settings of the telephone and, and according to the instructions, select the audio signal playback through the external device, and not through the built-in speakers.

Connect Soundbar to Sony, Xiaomi, Philips and other TV via HDMI

  • Take HDMI cable and insert it in the HDMI OUT connector (Tv Arc) Soundbar
  • Insert another end in the HDMI Arc connector on TV
  • Press the Home button.
  • Go to the Settings menu (Settings) and open the “Sound” section
  • In the “Speaker” paragraph, select Audio System

How to connect saunbar to lg tv

LG TVs boast an excellent image and sound due to the implementation of modern technologies in them. Nevertheless, many TV owners, especially with OLED screens acquire additional acoustic equipment, with which you can achieve a surround sound at home comparable in quality with sound in the cinema. It can be home theaters or their more democratic analogs. Soundbars (powerful, but fairly compact monocolones with several speakers).

  • High-quality TV sound and other external devices connected to it.
  • The ability to play audio and video content of various formats through external drives.
  • Ability to support mobile devices via Bluetooth.
  • Compact sizes (compared to the home cinema) with comparable power and sound quality.
  • Intuitive control (with the help of a remote or in separate modern models with voice commands).

Which Soundbar Pick to LG TV?

The main parameter of the Soundbar to pay attention to when choosing is its power. Its importantly correlated with the size of the room in which your LG TV is and where you plan to install and connect the saunbar. If the room is quite spacious (more than 55 square meters), then you need to look for a 200 W saudbar. In a room of 30-40 square meters, you can install a saoundbar with a power of 100-150 W. In a small room (up to 20 square meters) Sound panel 60 W.

IMPORTANT: To enjoy all the nuances of sound, it is not recommended to make the Soundbar volume above 70% of the total power. So it is worth choosing such a model that can provide such a sound level.

Before connecting the Soundbar to the TV, you need to correctly install the panel, otherwise the surround sound of high quality will not work. Make it very simple. It all depends on the location of your LG TV. If it is located on a special endback or rack, then the saunbar needs to be placed immediately before it, having previously convinced that the panel will not block the TV screen and will not create interference to control the TV with the remote control.

Some models of Soundbarov can be fixed right at the TV Rack. If you place the panel inside the stands / rack, then it is necessary to trace it to be as much as possible forward and the side and rear walls did not interfere with the sound. It also says to say that in front of the soundbar there should be no foreign objects or obstacles, such as the walls or door of the couch.

Important: If the Soundbar model you purchased supports the Dolby ATMOS or DTS: X option, in which the sound is reflected from the ceiling, it will have to refuse.

In the event that your LG TV is located on the wall, then optimally place the saunbar right under it. Most of the varieties of modern wall-mounted fasteners under TVs suggest similar placement and have additional fasteners under the media panel.

See also  The keyboard on the Sony Wio laptop does not work

After you placed the Soundbar, time to connect the panel to the LG TV and configure all the necessary parameters.

Connecting Soundbar to LG TV: Step-by-step instructions

Soundbars are divided into two categories by means of connecting to TV: active and passive.

Active Soundbar is essentially an independent audio system that can be connected directly to the TV.

Passive Soundbar can be connected to a TV solely using AV receiver.

The most common way to connect saubbars to TVs. with HDMI-intees. In rare cases, RCA or analog connectors are used for this purpose. Analog connectors (tulips) will not be able to provide high sound quality, so it should be resorted to this method only in the most extreme cases. Also unwanted to connect Sandbar to the TV using headphone jack (Minijack-2RCA cable).

The most important plus method with HDMI is that in this case the return beep option (ARC) is active. This means that the Soundbar is turned on simultaneously with your LG TV, and the sound level on both devices can be adjusted using one remote control.

After connecting the Soundbar, set the options you need. For this you need:

Using the remote control to enter the “Settings” menu.

Select the “Audio” section and install the “Digital audio output” item in the “Auto” mode. Some LG TV models will also need to enable the SIMPLINK option.

Also proven itself a way to connect the soundbar to the LG TV with an optical cable. In this case, the sound quality is also optimally, and also does not affect electromagnetic radiation, which may interfere with the transmission of sound. Connection is carried out using the connectors marked with Optical Out (on some Digital Out models) on TV and Optical In (Digital In) on the Soundbar.

Another way to connect an active Soundbar. Wireless. This method is suitable for LG TVs with Modern Models with Smart TV Function. To connect the Soundbar to the TV via Bluetooth, make sure that the model of your TV supports the LG SoundSync function. You can create it in the “Settings” section “Sound”. Enable this option, after which the LG TV screen will appear a list of devices available for synchronization. Select your Soundbar among them and install the connection by following the instructions on the TV screen.

IMPORTANT: Sometimes you may need to enter the password after connecting the Soundbar to the TV. Default is 0000 or 1111.

How to locate saunbar with a TV

In order for the sound panels to provide the highest quality transmission of audio signals to be highly recommended to install them in the right places. The best place is under TV on a special bedside table or wife wall next to the television device.

It should be noted that you should not install the sound panel too far from the TV, because in this case the feeling of spatial sound will be lost in the room, and the audio signal itself will become very muted. In addition, it is also ultimately not recommended to establish this device over the television, as it will also very negatively affect the quality of the audio signal.

In case the spaces under the TV are enough, the user can install the Soundbar on the wall under it. However, in this case it is very important to consider that between these two devices there should be a distance equal to at least 10 centimeters. As a rule, the audio panel is installed on the brackets, which can either be complete with the acquired device, or bid separately.

In addition, before installing, the user must also make sure that the wall is strong enough to withstand the weight of the attached device.

Also, the user can install the Soundbar on the shelf, which is facing the television device. In this case, it will only be necessary to make sure that the audio system does not close the TV screen. In addition, the presented device can also be placed on the shelf slightly lower, but it is recommended to move it a bit closer to the edge. Thanks to this, the sound will not be distorted because of the side stands bedside tables.

In addition, it should be noted that certain acoustic systems cannot be installed inside the racks, because in order for vertical sound effects to be created correctly, reflected from the acoustic wave ceiling.

After the user sets this device, it must also make sure that the sides of the sound panel are not closed by other objects, since in the opposite case it may cause due to which sound quality will deteriorate.

Why Sony Soundbar is turned off?

Constructively acoustic system “Soundbar” automatically switches to standby mode, if not working for approximately 15 minutes and no input signal is sent to it. After that, adjust the volume level on the Soundbar speaker system itself to get the desired volume level.

If the TV does not see the Soundbar, and the sound is still heard through the standard acoustics, you need to go to the settings of the telephone and, and according to the instructions, select the audio signal playback through the external device, and not through the built-in speakers.

Sound Panel Control Using the TV Remote Control. Instructions from the TV Manufacturer

Although the above instructions are a general way to connect and control the sound panel using a TV, many TV manufacturers have several other ways to do it. Depending on the manufacturer of your TV, find the specified brand and follow the instructions below.

See also  How to connect the clock to the phone iPhone

Samsung

You can connect Samsung TV to the sound panel or through a digital optical connection, or through the HDMI Arc connection. In both methods, use the appropriate cables for connecting the TV and the sound panel and change the sound panel source to “D.In “.

With a digital optical connection to the SAMSUNG TV, hold the left button on the Samsung TV remote control to activate or deactivate the Auto Power Link feature, which only works with an optical connection. Do not forget to also change the sound output settings for the audio panel to be controlled by the remote control of your TV.

When connecting the HDMI Arc, the source of your sound panel will automatically change to TV Arc, then you can use the right direction of the television panel on the navigation panel to turn anynet. which works only with connecting HDMI Arc.

For more information, visit Samsung Support.

As for LG TVs, there are several different ways to connect to sound panels, and LG TVs are supplied with remote control LG Magic Remote. You can connect the audio panel to the LG TV via Sound Sync via Bluetooth, digital optical connection or HDMI Arc connection.

To use a Bluetooth wireless connection, go to “TV Settings” “Sound” “Sound output”, then click “Sound Sound LG (Wireless)”. A device selection button will appear and search for your sound panel. Make sure the Bluetooth on your audio panel is turned on, then pairing two devices. If you need additional instructions on this occasion, we have a special guide made up only to determine the Bluetooth connection with SoundBar.

Digital optical connections and HDMI ARC connections are performed in accordance with the instructions below. You will use the Sound Sound Out area to change the output on HDMI or optical.

For more information, visit LG support site.

VICE

Vizio TVs are connected to the audio panels as described above, through an optical connection or HDMI connection. For optical connection on the Vizio TV port, the port may be called “S / PDIF”, and use “HDMI 1” to connect HDMI ARC, which is the Arc port.

When connected via Arc, your TV can automatically recognize your connection after an insertion of the cable. Otherwise, use the menu on the Vizio remote control and select “CEC” system, then change the setting to “disabled”, “enabled” or “Arc only” depending on your needs.

Additional information in the support service Vizio can be found here.

Sony TVs can be connected to a sound panel through the HDMI Arc connection, only an optical digital audio cable or both HDMI and optical digital audio cable. All settings correspond to the above instructions. When you switch the audio output configuration, you select the “audio system” for all settings.

However, Sony‘s support notes that when using an optical cable with features requiring HDMI connections, such as power lock and volume cannot be controlled using the TV remote control.

Visit the Sony Support Web page for more information, including useful information on setting up, for each Sony TV model.

Hitachi

Hitachi is known for its inexpensive smart TVs, which are often supplied with the built-in Roku TV. Connecting the sound panel to Hitachi Roku TV is similar to how you used the Roku remote control (regardless of the TV brand) to control all your TV and multimedia.

When using HDMI Arc to connect to the Hitachi Roku TV remote control, you need to go to the audio tv settings. Then set the “Audio” parameter “Auto (DTS)” to automatically connect to the sound panel. Also select “Auto Detection” in the S / PDIF and Arc settings.

After that return to the “System” in the main settings menu, then go to “CEC”. Check the Arc (HDMI) checkboxes to give a remote ROKU ability to control the sound panel.

For more information, contact Support Hitachi here.

Panasonic

Panasonic TVs can also be connected to a sound panel to control via HDMI or digital optical connection. When using HDMI connections, you will find the HDMI2 input (ARC) on the Panasonic TV. Fortunately, when connected via HDMI, Panasonic has an application that allows you to easily switch between TV speakers and sound panel to play sound.

When using an optical connection, the configuration is similar to the above instructions. After connecting the optical cable to the sound panel and TV, you will go to the TV settings, turn off the TV speaker and change the source to “optical”.

If you have problems, visit Panasonic Support here.

Most TCL TVs are supplied with HDMI ARC, so this connection must be preferred to connect and control the sound panel using the TCL TV remote control. Be sure to use HDMI high-speed cable supporting ARC and CEC control.

After connecting via HDMI Arc using the remote control, go to: Home Settings System Control Other Devices (CEC) HDMI Arc. Press the button to enable HDMI ARC. In addition, you need to turn off the “System Sound” by removing the checkbox in this feature.

Hisense

Hisense TVs can also control the sound panel through the HDMI Arc connection. After connecting both using the HIGH-SPEED 2 cable certified HDMI.0 Go to TV Settings ARC Speaker Sound. It will turn off the TV speaker and activates HDMI ARC.

BYRGPUB.COM 2022