Table of Contents

Connection rules without errors

It is not always possible to establish a connection the first time. To avoid most of the mistakes, configure the microphone, get high-quality sound, it is worth double-checking a few simple steps.

How to connect to wireless earbuds so there is no hassle when setting up?

  • Charge must be full, headphones are accurately activated.
  • The volume of both earbuds can be adjusted.
  • Connect the headset to the phone via Bluetooth.
  • Check if the headphones sound during a call, while listening to music.
  • Correct the parameters if they are not configured automatically.

Bluetooth phone connection

The general headphone setup procedure is the same for different phones. Through Bluetooth, the main transfer of all information takes place, so you need to turn on Bluetooth in the settings, or on the open top panel, where the letter “B” is indicated.

You can both connect wireless headphones to a Samsung phone, as well as to phones of other well-known brands: Xiaomi, Honor, Nokia.

Before using a new device, you need to prepare it by fully charging it.

We proceed directly to setting up AirDots to the phone via Bluetooth.

  • Open the case, take out the headphones. Keep your finger on the side sensors for a long time. Thus, the red light will turn on, all settings will be reset.
  • Next, place the headset in the box, after a couple of seconds, remove both earbuds. The purple light on the right earphone should be on if everything is in order.
  • Go to settings and activate Bluetooth connection.
  • In the connected devices, find the desired name containing AirDots.
  • After the smartphone has managed to find the headphones, click on the name and when the window appears, agree to connect.
  • In pop-up windows, give all permissions to the headphones to work.
  • After pairing with the phone, the white light will flash. This means headphone sync.

This company has the ability to connect only one earpiece. How to connect a Bluetooth headset to your phone ?

  • Take the left or right insert from the box, press the sensor button while holding it.
  • Turn on Bluetooth, start search.
  • Select Redmi R earphone in devices. right / L. left AirDots.
  • Give permission to sync.
  • Wait for the flashing on the earphone to end, then the headset will be ready to play.

The question often arises whether it is possible to connect AirDots to an iPhone, how to use wireless headphones on iOS, because there are special Air Pods for them.?

The answer is that headphones of any brand will be connected, excluding cheap Chinese ones. How the headphone pairing system works?

  • Open the case with headphones, bring it closer to the phone.
  • A window with a suggestion “Connect” will pop up, click the button.

Otherwise, the connection procedure does not differ from that for Android smartphones.

Headphones are not detected on the smartphone

Even following the connection instructions clearly, the headphones may not appear among the devices found. It happens that they are found, but the connection is still impossible. There are 4 options for solving the problem if the headphones do not connect to the phone:

  • Press the sensor again to establish a connection, if it did not work, turn off the headphones, and after a minute, activate it again. At the same time, restart Bluetooth on your smartphone. Manually configure the settings after searching for devices. Bring the headphones closer to the phone.
  • Perhaps the headphones are paired with another gadget nearby: another smartphone, laptop, tablet. Then reconnection is not available. Disconnect from those devices. Reset all settings on the headphones. After 2-3 minutes, restart the headset itself.
  • Turn off third-party wireless devices nearby. They can provoke a detection problem. Wi-Fi routers, radios, or Bluetooth enabled devices interfere with a stable connection.
  • If the headphones have not been connected for a long time, then cancel the boot process.
  • Disconnect and try again.

After updating the system, the headphones stopped working

Sometimes after rebooting the system, updating the old version, the phone does not detect the headphones.

This is more common among iPhone users, but those who own Android also face a similar problem if the headphones do not connect to the phone via Bluetooth the first time.

This happens when newer versions are not compatible with old headphone firmware. Therefore, there are two ways out of this situation:

  • install a new firmware version for the headphones;
  • return the old smartphone OS.

No sound

The sound often disappears after updating the operating system, downloading new applications to the phone. How to get back the sound of headphones connected to Android phone?

  • In the settings, double-check the parameters of the headset, that it is “for music”, “for audio calls”.
  • Check the charge level on the case.
  • Restart your headphones then your phone.
  • Revert the previous firmware version. You can resort to this if other methods did not help.

If all else fails, contact the service center for help.

How to connect Xiaomi AirDots wireless headphones to your phone

Wireless headphones are a comfortable, simple, reliable Bluetooth headset. They go on trips with them, listen to music while playing sports, communicate by phone.

Connecting headphones to a smartphone is straightforward, the step-by-step process is straightforward and easy.

How to set up wireless headphones for successful pairing? Use the suggested instructions.

Connection problems

It happens that the user has problems syncing the headphones or adjusting the settings. Most often, headphones do not connect to Android, only one of them is connected, the sound is heard intermittently.

How to fix the problem yourself when connecting wireless headphones to the phone is described below.

Connecting wireless bluetooth headphones TWS Xiaomi Mi True Wireless Earphones AIR 2

Automatic pairing

Take both Xiaomi Haylou GT5 earbuds out of the charging case at the same time. The headphone indicator turns white. Then in the process of pairing the headphones, the indicator will flash red and white alternately.

When the indicator of the left / right earphone starts to flash slowly in white, turn on Bluetooth on the smartphone and connect to “Haylou GT5”.

On subsequent power-ups, the Xiaomi Haylou GT5 headphones will automatically connect to the last connected device (Bluetooth must be enabled on the device)

Note: If a connection error occurs, put the earbuds back in the charging case and repeat the above procedure.

Stereo mode

Automatic connection Remove both Haylou GT3 earbuds from the case. Turn on Bluetooth on your smartphone, find “Haylou GT3” in the list of connections and connect. If an error occurs while connecting the headphones to the phone, put the headphones back in the case and reconnect. When you turn on the headphones again, they will automatically connect to the last connected device. In this case, Bluetooth must be enabled on the device.

Manual connection When Haylou GT3 headphones are turned off, turn on both headphones manually. After switching on, they will automatically pair with each other (the indicator will alternately flash red and white). After completing pairing (when the indicator slowly blinks white), turn on Bluetooth on your smartphone and connect the headphones to the smartphone.

Connecting Bluetooth headphones Haylou GT3 to the phone (Xiaomi Haylou GT3)

Connecting to two devices

✓ Place one of the earbuds in the charging case, then press and hold the function button for 2 seconds. Use device A to search and connect to the earphone

✓ After connecting the first earbud to device A, remove it from the charging case. Now place the second earbud in the charging case, press and hold the function button for 2 seconds. Use device B to search and connect to the earphone. This will allow each earphone to be connected to a separate device.

READ  How to clean the speaker on an Honor phone

Attention: Before using this function, you must clear the connection history of each earbud.

Connecting Xiaomi Mi Earphones 2 Basic to the phone

Connecting headphones to a new device 1. Place the Xiaomi Mi True Wireless Earphones 2 Basic in the charging case, press and hold the touch area of ​​any of the earbuds for 3 seconds. The headphone indicator is blinking white and the headphone is waiting to be connected. 2. Turn on the Bluetooth devices, then find and connect to “Mi TW Earphones 2 Basic”. If prompted for a password, enter “0000”.

Connecting headphones to your Mi phone Place the headphones in the charging case and close the lid. Make sure your Mi phone has Bluetooth enabled. Bring your phone close to the charging case and open the cover. Follow the directions on the phone screen to connect to the headphones. Note: The quick connect function is currently only supported by some Mi phones. You need to update your Mi phone to the latest stable version.

Disconnecting the connection When your device is out of range of the headphones or its BIuetooth function is turned off, the headphones will automatically enter connection standby mode. If the earbuds are not connected to any device within five minutes, they will enter sleep mode.

Automatic connection When Mi Earphones 2 Basic is in the charging case, opening the charging case cover will automatically connect the headphones to the last used Bluetooth device. If the earbuds are not connected to any device within five minutes, they will enter sleep mode.

Note: If the headphones cannot automatically connect to the device, you need to manually connect the headphones to the desired device through the Bluetooth settings on the device.

Due to the nature of the Bluetooth signal, under difficult conditions with 2.4GHz electromagnetic signal interference, there may be occasional shutdowns or no sound.

Stereo connection

Automatic pairing Remove both earbuds from the case. Turn on Bluetooth on your smartphone and search for “Haylou-GT1Pro” to complete the connection. If the connection fails, place the headphones in the case and repeat the connection procedure again. After the first successful pairing, the earbuds can automatically reconnect to the last connected device (Bluetooth on the device must be turned on)

Manual pairing Manually turn on both earbuds. The white indicator will flash rapidly in white. When the indicator on the right headphone starts to flash white slowly, you can connect the headphone to your smartphone.

The second way how to connect Redmi AirDots to the phone

If after the first method the headphones do not work correctly, then you need to reset the headphones settings. This option helps absolutely in any situation when there are some errors with synchronization. This can be done as follows:

  • Open Bluetooth and remove the device;
  • Take the headphones out of the case;
  • Keep your fingers on the touchpads;
  • Wait until the white and red LEDs go out;
  • Continue holding the panel even after a complete shutdown;
  • After a couple of seconds, the red and white indicator will flash a second time;
  • Return the headphones back to the case;
  • Reconnect the headphones according to the previous instructions.

How to connect Xiaomi AirDots headphones to your phone?

Today, all consumers are crazy about accessories for smartphones that do not have wires. That is why manufacturers are forced to resort to the latest technologies. However, some users experience some difficulties in connecting new gadgets to smartphones. This guide will help you figure out how to connect AirDots to your phone.

First connection method

If after these actions there is sound only in the right AirDots earphone, then you should touch the touch panel on the left earphone.

The manufacturer intended that the headphones will automatically connect to the phone as soon as Bluetooth is turned on. As soon as the LED stops flashing on the two earbuds, it means ready to pair.

Worth remembering!

If the red LED is on, it means that the battery is discharged. If a white LED is visible, the battery is 100% charged

Headphones are connected in the same way, regardless of the operating system of the phone.

You can change the volume using the touch panel.

In order to check the exact battery level, you need to go to Bluetooth devices.

If, when you turn on or off the headphones, the owner hears speech in Chinese, then this is how it should be.

Only one earphone can be connected. To do this, you need to put the second earphone in the case, wait about 15 seconds until the fast vibration passes and you can connect.

Other headphones and other devices

All models of wireless devices are connected in the same way (Jabra, Huawei, etc.). You need to open the settings section, go to the “Bluetooth” tab. Launch the accessory itself. This usually requires one press or hold of the button for 5-10 seconds.

Xiaomi devices are synchronized with any gadgets that have a Bluetooth function: computer, laptop, tablet, etc. The connection will be the same for both Android phones and iPhones.

What to do if Xiaomi does not see the hardware

Such a problem can arise for several reasons, ranging from mechanical damage to incompatibility of devices. Therefore, before purchasing, you should find out which version of Bluetooth the accessory works with.

How to pair Redmi Airdots with Samsung Galaxy Phone

To fix the problem, you should start by diagnosing synchronization. Sometimes the connection freezes. In such cases, you need to cancel the process, then start pairing again. The device may not have been selected. Often the reason lies in a discharged battery.

If the device previously worked with another phone, then it must be rebooted by long pressing the button (15 seconds).

Sometimes for pairing it is required to enter the PIN code, which is attached to the instruction manual of the accessory.

Wireless headphones have been the flagship accessory of the past few years. and more often people began to replace “wires” with a more comfortable headset. Therefore, now many brands focus their production on such gadgets. The Chinese brand Xiaomi also does not stand aside. in the spring of 2019, the manufacturer released the new Xiaomi Redmi AirDots, also known as Mi True Wireless Earbuds Basic. According to buyers, they provide good performance and great sound. How to deal with connecting them to a smartphone. we will discuss in this article.

Connecting wireless headphones

The principle of connecting different models is almost the same.

Smartphone sync instructions:

  • Mi Collar Headset. It’s easy to connect wireless earbuds to your Xiaomi phone. The headset should be inserted into the ear, the lower part should be directed towards the mouth. To sync your device with your smartphone, hold down the button located at the top of the device. When the bottom light blinks, it will indicate the readiness of the device for work. Next, you should activate Bluetooth in the phone, in the list that appears, select the necessary gadget.
  • Millet Sports First you need to turn on Bluetooth by holding a single button on the device until a blue indicator appears. If the smartphone has not found Millet Sports, then you need to click “Refresh”. Click on the added hardware, wait for the connection. When the light on the capsule lights up, the equipment is ready for operation.
  • Mi Sport Headset. You need to activate Bluetooth on your phone, hold down the power key. When the smartphone finds the equipment, you need to click on it from the list.
  • Mi Collar Headset Youth. This model has the ability to connect to several devices at once. On the left side of the arc, there are buttons to control the Mi Collar Headset Youth. With their help, you can answer and make calls and synchronize with your smartphone using the above method.
  • Mi Monitor. Start the device (key on the speaker cup). To pair with a smartphone, you need to go to the settings, turn on Bluetooth, select the required device from the list.
  • Mi Sport Mini. Turn on Bluetooth on the device. Find the button located on the remote. Select Mi Sport Mini from the list of available devices in the phone.

As for pairing Redmi AirDots, there is a separate instruction article about this.

How to connect Xiaomi Redmi AirDots headphones

To connect headphones, you only need a Bluetooth-enabled phone and the accessory itself.

Please note that turning on and off the gadget occurs as a result of removing or putting the headphones back into the case, respectively. So do not try to find any buttons with which you can activate them.

Answers to popular questions

Bluetooth headphones keep a charge for less than an hour, is this normal? Contact the service center. If the headset is under warranty, you will receive a free repair or replacement. How to properly charge new headphones for the first time? There are no specific guidelines. If there is an indicator on the model, then during discharge it will light up red. After several hours of charging (see the instructions for details), the gadget can be disconnected from the power supply. How do headphones differ from a headset? These are similar concepts, but they still have differences. The headphones are designed exclusively for listening to audio files, and the headset is also suitable for telephone conversations. We recommend purchasing headsets, as this is the most optimal solution.

READ  How to find iPhone if it's offline

Today we discussed how to connect Bluetooth headphones to a Xiaomi smartphone. This is a very simple and easy procedure that even beginners will have no problems with. Choose great headsets and enjoy high-quality listening to music and talking with loved ones! Good luck!

However, despite all the advantages of these headphones, it can be difficult to connect them to a smartphone for the first time. This is because many phones perceive this Xiaomi Mi bluetooth headset as a set of Chinese characters.

In order to avoid problems when connecting the headphones for the first time, it is advisable to do this at home, where there are no other Bluetooth devices. Then nothing will prevent a successful connection.

  • Turn on Bluetooth on your phone. Then you need to hold the only button that is on the devices until the blue indicator starts blinking.
  • Next, a new working window will appear on the smartphone screen. Click on the “Update” button that appears. Repeat the procedure until a new device appears in the list.
  • From the list you need to select a new device, wait for the connection and you can use wireless headphones!

Charger

The gadget will not be able to work if it is not charged, so place it in a case to fill the battery before using it. If the indicator is red, Redmi AirDots are charging, if white. they are ready for use.

Take the headset out of the case and wait a couple of seconds. the earbuds should sync with each other. When the left catches the signal from the right, sync is complete, as indicated by an indicator that will flash white.

comparison table

Below you will find a detailed diagram with the pros and cons of the two types of headsets. Read and choose your ideal option.

We connect both Xiaomi headphones

I am considering a situation in which the headphones worked normally before, but at one sad moment something happened, and you started to hear sound from only one of them.

I also assume that there is no physical breakdown, you did not drop them, water did not get on them and the battery of each is charged, then there is a chance to connect both and at once, as expected.

In this case, I propose to adhere to the following algorithm of actions, which in 95% of cases solves the problem:

How to connect Redmi Airdots TWS with iphone 11

    The easiest way is to break sync with your phone and reinstall it. To do this, in the “Bluetooth” settings on the smartphone, find TWS Xiaomi, click on the arrow next to them and in the menu that opens, select the “Unpair” command;

  • Put both earbuds in the case, wait 10 seconds, take them out. If they have not entered pairing mode on their own, press both on the touchpads and hold for 10-15 seconds until they start flashing in different colors. This means they are looking for a new audio source to connect. Take your phone and from the Bluetooth menu under Available Devices select the name of your TWS. If they are designated as “L” and “R”. left and right respectively, always choose “R”. he must be the leader;
  • If the first two points did not work, then you need to reset the Xiaomi TWS settings, to do this, place them in the case, hold for 10 seconds, then remove and hold down on the touch panel of both for 40-50 seconds. They should beep and the LED should go out. Then place them in the case for 10 seconds and remove. In this situation, they should automatically enter pairing mode, find them in the menu on the phone and enjoy the operation of both headphones at the same time.
  • How to connect both Xiaomi AirDots headphones to the phone

    Everyone is good at Xiaomi AirDots or Earbuds headphones: they are sold at an affordable price, they look beautiful, have a long battery life and sound very confident for their category.

    But, unfortunately, there are no perfect products, users noticed a problem with Xiaomi headphones, which is expressed in the fact that sometimes they lose synchronization with each other.

    Fully wireless earbuds (TWS) from Xiaomi work as follows: when you take them out of the case to listen to music, the first thing they need to do is automatically find each other and sync, after which one of the earbuds (most often the right one) becomes the presenter, and second slave. The lead earphone connects to your phone or computer.

    It is the presenter who receives the sound or music from the source and transmits it to the slave headphone, so the connection of both is very important. But sometimes it breaks down, so you only hear the sound from one Xiaomi earphone.

    This can be helpful:

    Hi, my name is Timur. Since childhood, I have been fond of computers and the IT Industry, I like it, this is my passion. Over the past few years, I have been deeply interested in Xiaomi: ideology, technology and a unique approach to explosive business growth. I own many Xiaomi gadgets and share my experience of using them, but most importantly. solving problems and incidents that arise under unexpected circumstances on the pages of Mi-check.ru

    Connecting bluetooth headphones Xiaomi

    Chinese manufacturers Xiaomi have been producing various sports accessories for a long time: sneakers, backpacks. However, fitness watches and wireless headphones are in great demand. Those users who come across this accessory for the first time are interested in how to connect Xiaomi Bluetooth headphones. The answer to the question posed can be found below.

    Other headphones and other devices

    All models of wireless devices are connected in the same way (Jabra, Huawei, etc.). You need to open the settings section, go to the “Bluetooth” tab. Launch the accessory itself. This usually requires one press or hold of the button for 5-10 seconds.

    Xiaomi devices are synchronized with any gadgets that have a Bluetooth function: computer, laptop, tablet, etc. The connection will be the same for both Android phones and iPhones.

    Xiaomi headset

    Connecting a Bluetooth headset Xiaomi is practically no different from synchronizing with headphones:

    • Mi Bluetooth Headset Youth. Feel the power key on the headset, press. Go to the settings of the mobile device, section Bluetooth. Make the slider active. Find this accessory from the list of found devices, select it.
    • Mi Bluetooth Headset. Press the long key located on the side. You can synchronize with two phones at the same time. The connection will be carried out in turn according to the same principle that was described above.
    • Millet Mini. There is only one button on the headset that performs different functions: turning on, turning off, answering a call, listening to music. Connects to the gadget via Bluetooth settings. The headset must be turned on during pairing.

    pairing headphones to a smartphone

    The first way to connect Xiaomi Redmi AirDots headphones to a mobile device is as follows:

    Take the earbuds out of the charging box (How to properly charge Xiaomi Redmi AirDots);

    After turning off the headphones, you will need to turn them back on in order to pair them. To do this, simultaneously press and hold the touch area for about 30 seconds;

    Hold the touch area for about 30 seconds

    Place them back in the charging box for about 5 seconds;

    Place the headphones in the box for 30 seconds

    Now you need to connect AirDots to your phone. Take your Xiaomi and go to its settings;

    Select Bluetooth in the gadget settings and activate this function;

    Activate Bluetooth in phone settings

    Select device scan, and find “Redmi AirDots_L” and “Redmi AirDots_R”;

    Find the right and left earbuds in the device list

    Connect to “Redmi AirDots_R” (right), and since the left earphone was previously paired with the right one, they will work;

  • If the system requires a code for pairing, then enter 0000.
  • Possible difficulties

    The first and main reason for the appearance of difficulties in connection is the malfunction of the devices themselves.

    If there is a signal, then the problem is not with the headset, but with the health of the phone.

    Sometimes users forget to charge or simply turn on their headphones, and when they find that the headphones are not connecting to the smartphone, they blame it as a breakdown. The corresponding changes in the LED indication (the appearance of blinking, the disappearance of blinking, the light of indicators of different colors) indicate the inclusion or change of the state of operation of the headphones.

    However, some budget models of the wireless headset may not indicate the inclusion in any way, because of this, certain difficulties arise in order to really determine whether they are turned on at all or not. In this case, you will have to spend time checking the status of the headphones directly at the time of pairing and, if necessary, press the power button again and repeat the same actions.

    READ  How to reset a Sony phone xperia z

    Most headphones turn on a blinking light in pairing mode to indicate that they are ready to connect to other devices. After that, the countdown begins, which is required to establish a connection and set up the headset on the smartphone. If you do not have time to complete all the necessary actions during this time, the headphones are turned off and the signal disappears. These measures were provided by the manufacturers to save battery power and increase the battery life of wireless headphones without recharging.

    By the way, the Bluetooth version of headphones and a smartphone may differ, which makes it impossible to connect them to each other. Updating your phone’s operating system may cause new drivers installed automatically to be inconsistent with the headphone firmware. In this case, you will have to return either to the previous version of the smartphone operating system, or to reflash the headset.

    Often, inexpensive Chinese headphones have problems with connection and connection quality. But even such a headset can be configured and achieve a high-quality signal and sound level when pairing. Customizing your headset with your own hands or via an app may be enough.

    What else the Chinese devices are guilty of is complex and incomprehensible names. If several such devices were connected to the smartphone, then the headphones may not be found in this list. The only solution to this problem is to turn off Bluetooth, then turn on and reconnect the headphones. The line that appears at the time of pairing will be the name of the connected headset.

    Sometimes there is a desire to connect several wireless headphones to a smartphone so that music from one device is available for listening to several people at once. Unfortunately, it is impossible to do this directly due to the peculiarities of the multimedia operation and the Bluetooth parameter. But sometimes you can go for some tricks. Many full-fledged on-ear headphones have both wired and wireless pairing functionality. Such a device must first be connected to the phone via Bluetooth, and then another headset must be directly connected to it. As a result of the actions taken, the music that is turned on on one phone can be heard simultaneously by 2 people in different headphones.

    A distinctive feature of the headset of the famous brand JBL is the presence of a specific function called ShareMe. Unlike the previous connection option, this function allows you to share the signal from the smartphone wirelessly, but only exclusively between different devices of this particular brand.

    Sometimes users are faced with the problem of only one of the earbuds working, while both cannot work at the same time. When pairing with a phone, such a device appears in the list of available for connection in two lines separately for the right and left audio device. In this case, you need to click on one of the lines several times, after which a check mark will appear in both lines, and the connection will be established for both headphones.

    The last thing that very often worries consumers is the password that the phone can ask for after pairing. This four-digit code must be specified in the settings for the headset. If it is not there, then you will have to enter the standard code (0000, 1111, 1234). As a rule, this works with almost all cheap Chinese devices.

    For information on how to connect wireless headphones to your phone, see the following video.

    Operating and charging time

    Charging the case takes about 45 minutes. The headset charges a little faster and can be used on a full charge for 4 hours. A charged case is able to restore the battery level of two earbuds 3-4 times.

    With the active use of two headphones, their autonomy reaches 4 hours. With alternating use, the operating time increases by 1 hour.

    Instructions on how to connect Xioami Mi AirDots 2 Pro to the phone

    Now let’s see how to connect Xioami AirDots Pro 2 to your phone. The instructions will be universal for both Android and iOS smartphones. This means that the setting will be universal for smartphones such as iPhone, Samsung, Huawei, Honor, Meizu, LG and of course Xiaomi. The procedure here will be a little unusual compared to other wireless earbuds.

    • So, turn on Bluetooth on your phone
    • Next, click on the button located on the side of the case
    • The indicator light on it should blink white. this means that the Xioami AirDots 2 Pro are ready to connect.
    • Open the Bluetooth settings on the smartphone and connect to the device named “Mi True Wireless Earphones 2”

    Now you can get them out of the case and use them. Disconnection occurs automatically when you put it back in the case and close the lid.

    Reconnection is also activated immediately after opening the cover of the case, and not when removing the headphones from the case, as is done in most other models.

    How to charge Redmi AirDots

    To charge Redmi AirDots, you need to use the charging case. The case itself is charged from external power sources, to which it is connected using a microUSB cable.

    Connecting Redmi AirDots to the phone

    Modern headphones are very simple and comfortable to use, because no wires are required for listening. But with the introduction of the Bluetooth module, the connection to the phone has become more complicated. Owners of Redmi AirDots are often faced with the fact that the synchronization fails.

    Today we will tell you how to properly connect two earbuds to mobile devices on Android and iOS and computers, and also consider methods to help with desynchronization.

    How to connect one ear pad

    Users do not always want to use two inserts. For a conversation, only one is quite suitable, which acts as a compact headset. In addition, the battery life will increase by an hour.

    But keep in mind that for such purposes you need to use the right ear cushion, which is the main one; the left one can be put back in the case. If you put the right one in the case, Xiaomi AirDots will automatically turn off. Just hold down one control button until the white flashlight appears and sync in the smartphone settings.

    Connecting to an Android phone

    The procedure may seem multi-stage and time-consuming, but this is only at the first connection. Then you only need to activate Bluetooth, and AirDots will connect automatically.

    Before connecting Redmi Dots to another phone, be sure to remove it from your current smartphone. It is advisable to clear the application cache and reset the gadget to the factory state.

    What to do if headphones are connected separately

    Out of sync is a very common occurrence that causes a lot of inconvenience to use. But there are two proven methods that will return binaural mode. The first option is a standard reset to factory settings, carried out by a long press (for 40-50 seconds) on the control button. A similar procedure will also help:

    How to pair Redmi Airdots with Iphone 7 or Iphone 7 plus

    • We extract the Dots and forcibly deactivate them.
    • Clamp the panels until the red indicators light up and a beep sounds. Letting go of the buttons as soon as the lights go out.
    • We put Mi or Redmi AirDots in the docking station and take it out again. The headphones should be connected to each other while still in the case, after which they will work in stereo mode without any problems.

    Connecting to iPhone

    Headphones from Xiaomi work well with the iPhone, but subject to the Bluetooth specification 4.2 and higher (version 4.0 may slow down the sound). If you have a relatively new model from Apple, pairing will happen instantly, and the melody will be broadcast in high quality without hesitation.

    • Enable AirDots in the same way as in the first paragraph.
    • Activate wireless technology on iPhone and find the necessary gadget in the list.
    • Enter confirmation code.

    Is it possible to connect to the computer

    Any wireless earbuds connect not only to a smartphone, but also to a PC. The main condition is the Bluetooth module. All laptops have it, but most desktops don’t. Purchase a special adapter that plugs into the USB connector and transmits a signal.

    • Go to the computer in “Settings” and open the section “Bluetooth, printers, mouse”.
    • Select Add Devices. The model you want will be there (provided that it is enabled).

    This article has detailed instructions on how to sync wireless headphones with computers and laptops.

    We discussed how to connect Xiaomi (AirDots Youth Edition) and Redmi to any device. As you can see, it is quite simple and fast. Hard Reset almost always helps when problems arise.

    BYRGPUB.COM 2021