Table of Contents

Nuances in use

The sound will start playing as soon as you insert the earbuds into your ears. If one of them is removed, the playback will be paused. You can change this in the settings. read below.

If the settings are set to play from only one earphone, when you take it out of the ear, playback stops and, if you do not insert it back within 15 seconds, it will automatically start again. If not, then you will have to do it manually.

Do not store the earbuds outside the case when not in use, especially when empty. So they are easy to lose and it is better not to leave the battery on the earbuds without a charge, otherwise it will quickly become unusable.

If you are using Airpods Pro, it is recommended to use the correct size earbuds that do not cause discomfort. There are three of them in the kit to choose from.

connect, headphones, iphone

To select the device from which you want to play music. Open the control center and hold down the music button, there click on the icon at the top right. Devices change here.

Playback control

There is a special pressure sensor on the body of the earbuds, it is through pressing it that you can control playback.

  • One press. pause and play
  • Double tap. switch to the next track
  • Triple tap. go to the previous song
  • Say “Hello Siri” and give her a command to control other functions such as volume.

In the first generation Airpods, Siri launches with a double tap.

What to do if AirPods do not connect

Check the IOS version, it must be at least 12.2. And best of all, immediately upgrade to the newest one, because they fix most of the problems that may arise when connecting.

See if Bluetooth is enabled on your phone by swiping from the bottom to the top of the screen.

Place the plugs inside the case and close it for 15 seconds. Also see if charging is in progress. Read more about this in the article. How to charge Airpods.

After the headphones have been in the case for 15 seconds, when you take them out from there, the indicator should light up white at the same time. This means they are ready to connect.

Open the case with AirPods inside and place it next to the unlocked iPhone. Then follow the instructions on the smartphone screen.

You can try to remove the headset from the list of Bluetooth devices in the phone settings. And then add again.

Reset your AirPods headphones, for this:

  • Place the plugs inside the case for 30 seconds
  • Open the case, place it next to the iPhone. Go to the bluetooth settings on your phone and remove the headset by clicking on “Forget device”
  • On an open case with headphones inside, hold down the button for 15 seconds until the indicator flashes yellow
  • Close the lid for 15 seconds, open it and place it next to the phone, then follow the instructions on the screen

How to connect AirPods to iPhone. quickly and easily

Airpods wireless earbuds are among the most popular TWS models ever released. All this thanks to good sound quality and ease of use.

But, it is not always clear how to connect them to your iPhone, since the process at first glance is slightly different from other models. In reality, everything is easy and you will love it.

The last post was about how to connect wireless headphones to an iPhone. Today we will take a closer look at this process on headphones from Apple themselves and you will learn how to easily and quickly connect Airpods to your iPhone.

Interesting! Airpods let you fully control your phone through Siri voice assistant, make calls, listen to music, use your smartphone as a baby sitter, and more.

How to set up Airpods

We have already considered in detail in the article about how to use AirPods, but here this information will not be superfluous either.

Place the open case with inserts inside next to the smartphone.

Open the settings and go to “Bluetooth”. Click on the exclamation mark icon on your headset.

Here you can change a number of parameters, for example, change the action when you press the sensor of the earbud, disable the function of playing music only when the earbud is in the ear, and others.

How to connect Airpods to iPhone

Make sure your phone has the latest IOS version 12 or higher. Since the developers are constantly changing and adding new functions and solving problems that were in the old versions with the AirPods connection.

If you do not want to update, if problems arise, you will still need to do this, because even technical support will tell you to update to exclude all possible problems.

Unlock your phone, open settings and turn on Bluetooth, or simply unfold the bottom curtain and turn it on. Then go to home screen.

Make sure the headset is charged. Open the case with the earbuds / earplugs inside and place it next to the phone. On the case, the indicator should light up white, this means that the headset is in connection mode.

An animated splash screen and a “Connect” button will appear on the iPhone. press it.

The charge of both the earbuds and the earbuds will be shown. So you can always see what it is. It is not shown on the case and inserts, you will have to look here or display a special widget on the screen with them.

Then follow the instructions that appear on the screen. It all depends on which version of Airpods you have: Pro, first or second generation. You may also need to set up to work with Siri.

After all the settings, click on “Finish”. That’s it, now you can use all the capabilities of your Airpods, just take them out of the case and insert them into your ears.

Interesting! Also, they can be connected to other smartphones, computer and laptop. about this. how to connect airpods to Android.

Connecting Two Airpods to One iPhone

Connect the first pair of headphones to your smartphone using the method described above.

Open iPhone settings and go to Bluetooth settings.

Press the pairing button on the second headset until they appear on the phone in other devices. Immediately after that, just click on them.

Interesting! You can set up one earbud to work on one iPhone and the other on the other. Just take out one and pair with one smartphone, put it back in the case, and then take out the other and set up in the same way on the other phone.

Connection rules without errors

Wireless headphones are not always capable of high-quality wireless communication. If you properly calibrate the headset, even the most budget model can get good voice and sound transmission. For stable operation, you will need to perform a number of simple steps.

one Fully charge your wireless headphones, turn them on
2 Adjust headphone audio and microphone volume
3 Connect headphones and phone via Bluetooth
four Evaluate the audibility of music and telephone conversations in headphones
five If necessary, re-adjust the volume of the gadget
6 Save optimal settings if automatic sync is not provided

Important! These instructions contain general tips on how to connect wireless headphones to your phone quickly and correctly. Special applications have been developed for many devices. They allow you to fine-tune your wireless headset and smartphone.

How to Connect TWS to Mobile Phone Correctly

The i12 TWS earbuds support both general binaural (2 earbuds) and separate connection of one earbud to the phone. Before pairing, do not forget to charge them by inserting them into the box for 1-2 hours.

To connect to a mobile device, you need to do the following:

  • Remove both earbuds from the box;
  • The earbuds will flash red and blue and auto pair with each other;
  • Turn on your phone, and activate the Bluetooth connection on it;
  • Search for nearby Bluetooth devices, and find the i12 TWS headset;
  • Tap on them in the list of found devices;
  • The phone will connect to the headphones and the message “Connected” will appear;
  • Wireless earbuds will appear in the list of connected devices.
READ  How to Connect Samsung Wireless Charger to Phone

If the two headphones are not paired with each other, delete the headphone information in your phone’s Bluetooth connection data. Then press and hold the power button of both earbuds for 5 seconds to enter pairing mode. The left i12 TWS earbud will flash blue. The red indicator on the right will turn off when the right and left earbuds are successfully paired.

The wireless device will turn off if it fails to pair within 5 minutes.

This can be helpful: How to connect your Jabra headset to your phone.

How to connect wireless earbuds to your Android phone

The connection procedure below is relevant for Samsung phones and most other Android analogs.

  • Go to settings.
  • Select “Bluetooth” or “Connections” menu.
  • Activate wireless connection.
  • Find available devices or create a new connection.
  • Select headphones for connection (by name or number).

For your information! To speed up the process, the “Bluetooth” icon is held in the status bar, after which the required settings are instantly accessed.

How to connect Honor wireless earbuds

The specified headset for phones such as Samsung, Huawei, Xiaomi is connected in the following sequence.

one Find the power button on the headphones. Include them
2 Long press the Power button to activate the Bluetooth headphone. A successful connection will be indicated by blinking LEDs. red and blue
3 Find the item in the phone settings. Bluetooth connection
four Activate it
five Click on the Bluetooth menu. a list of devices available for connection will appear
6 Find the device you need, click the “Connect” button
7 Upon successful connection, the red LED goes out, the blinking of the blue signal stops (depending on the headphone models). LED is on continuously

Important! If at the beginning of the setup, only the blue LED on the headphones lights up, they are not available for search, but will be connected to the device paired with the headphones before.

Separate (monaural) pairing of one earbud with a smartphone

The procedure for connecting one earphone of the Chinese model i12 TWS to a mobile phone is as follows:

  • Remove one of the earbuds from the charging box, the earbud will blink red and blue;
  • Turn on your phone and activate Bluetooth on it;
  • Search for nearby Bluetooth devices, and find our earphone;
  • Tap on it, after which the devices will be connected;
  • After that, the message “Connected” will appear.

Connecting to a phone via Bluetooth

The phone is connected to the headset via Bluetooth. a system for wireless transmission of information. In standard bluetooth mode, the signal is transmitted at a distance of up to 20 meters. The latest technology allows you to count on reliable reception even over long distances.

It is recommended to connect wireless headphones in the following way:

one find the Bluetooth connection buttons in the settings menu
2 activate it
3 pair the phone and the desired device (in some cases, you will need to enter a password)

How to connect JBL headphones to your phone

JBL Bluetooth headphones are connected according to the standard scheme:

  • On your smartphone you need to open “Settings”.
  • Select “Wireless networks”.
  • Activate Bluetooth module.
  • Wait while the system finds available devices for connection.
  • If the headphones have already been connected to the phone before, the connection will be in automatic mode.

I12 TWS bluetooth headset specifications

Despite the fact that the i12 TWS headphones are a clone of Airpods, many clones have already been created for them, which are significantly inferior in sound quality and duration of work.

The very first sign of a cheap copy is the absence of the inscription “Auto Power On Auto Pairing 5.0” on the front side of the box, and the list of technical characteristics of the device on the back side. Low budget copy box at the back and sides is empty.

As for the technical characteristics of the i12 TWS headset, which can be easily connected to a smartphone, they are as follows:

Characteristics: Parameters:
Device type: Wireless headphones
Bluetooth: 5.0
Frequency range: 20-20,000 Hz
Sensitivity: 108. 3dB
Control type: Sensor
Distance: Up to 15 meters
Working hours: When listening to music 3-4 hours
In standby: Up to 100 hours
Charging time: Up to 2 hours
Noise suppression: Yes
Assistant Support: Yes

The set of the device usually includes headphones, a box, a charging cable and a special fabric

Answering a call with i12 TWS headset without phone

To manage incoming calls on the i12 TWS:

  • Answer or end a call: press the earbuds multifunction button once;
  • Reject call: double-click on the headphone multifunction button.

How to turn wireless headphones on and off

The two i12 TWS earbuds will turn on and automatically connect to each other after being removed from the charging box.

To turn off the headphones, just hold down their multifunctional touch button for a few seconds (usually 5-6).

Music playback via bluetooth headphones

Management comes down to three simple points:

  • Play or pause: press the multifunction touch button once;
  • Next song: three clicks on the multifunction button of the right wireless headphones;
  • Previous song: Three clicks on the multifunction button of the left device.

Separate (monaural) pairing of one earbud with a smartphone

The procedure for connecting one earphone of the Chinese model i12 TWS to a mobile phone is as follows:

  • Remove one of the earbuds from the charging box, the earbud will blink red and blue;
  • Turn on your phone and activate Bluetooth on it;
  • Search for nearby Bluetooth devices, and find our earphone;
  • Tap on it, after which the devices will be connected;
  • After that, the message “Connected” will appear.

How to Connect i12 TWS to Mobile Phone Correctly

The i12 TWS earbuds support both general binaural (2 earbuds) and separate connection of one earbud to the phone. Before pairing, do not forget to charge them by inserting them into the box for 1-2 hours.

To connect to a mobile device, you need to do the following:

  • Remove both earbuds from the box;
  • The earbuds will flash red and blue and auto pair with each other;
  • Turn on your phone, and activate the Bluetooth connection on it;
  • Search for nearby Bluetooth devices, and find the i12 TWS headset;
  • Tap on them in the list of found devices;
  • The phone will connect to the headphones and the message “Connected” will appear;
  • Wireless earbuds will appear in the list of connected devices.

If the two headphones are not paired with each other, delete the headphone information in your phone’s Bluetooth connection data. Then press and hold the power button of both earbuds for 5 seconds to enter pairing mode. The left i12 TWS earbud will flash blue. The red indicator on the right will turn off when the right and left earbuds are successfully paired.

The wireless device will turn off if it fails to pair within 5 minutes.

How to connect wireless earbuds to iPhone via Bluetooth, even if they don’t connect?

Wireless headphones pair with Apple mobile devices almost lightning fast. just look in “Settings”, select the “Bluetooth” section and find the necessary equipment in the list that appears.

Despite the predictability of actions, wireless headphones are sometimes connected to the iPhone far from the first time, and sometimes not from the third attempt. Finding the causes of the malfunctions and understanding the details is worth visually, using detailed instructions.

Connection procedure: where to start and what settings are needed

Before pairing wireless headphones with an iPhone, iPad or iPod Touch, you will have to understand the instructions that came with the audio equipment. Manufacturers describe in detail some of the features related to connection, specifications or buttons available on the case to activate some specific functions.

As a rule, it also describes the way to turn on the headphones, as well as the actions that need to be dealt with before pairing with mobile equipment. Often you have to either pinch the buttons on the headphone case or sharply flip the volume keys.

After preliminary preparation, it remains to repeat the following algorithm:

  • Open “Settings” and go to Bluetooth.
  • At the top of the interface, move the slider to the active (green position).
  • Wait until there are entries in the Other Devices list that you can interact with. You should search by name, at least somehow connected with the manufacturer of wired headphones or the model on hand.
  • The last step is to click on the record, wait from 5 to 15 seconds until the “Connected” status appears. Bluetooth technology is completely ready to work.

If you don’t see your headphones in the list, then try turning them on. Also, on some models, you also need to additionally hold down the “Bluetooth” button, which allows you to pair devices.

Why am I having connection problems

Wireless headphones not manufactured by Apple, but by third-party manufacturers. Samsung, Huawei, Xiaomi? and little-known Chinese brands. deprived of the usual magic of Airpods, when a couple of taps are enough for pairing. Therefore, before connecting audio equipment to the iPhone, you will have to double check every little thing:

  • Distance problems. Bluetooth 0 operates at a distance of up to 10 meters, previous versions of the wireless connection cover a distance of 8-9. But, as practice suggests, sometimes even 50 centimeters at the first pairing is too much: it is better to keep the headphones as close as possible to the iPhone, iPad or iPod Touch.
  • Experiments with the network. Old Bluetooth and Wi-Fi incompatibility issues are still rare today. Temporary disconnection from unnecessary network sources will help to get rid of the error. It will help, among other things, the transition to airplane mode with the subsequent forced activation of Bluetooth.
  • Restart iPhone. A banal but sure way to get rid of rare problems and temporary difficulties. Restart method depends on the version of iPhone (5, 6, 7, 8 or X): on models with Face ID, hold the side button and volume down or up keys, on phones with Touch ID. the button located at the top or side of the case.
  • Refusal to pair. If the question. how to connect wireless headphones to an iPhone has long been resolved, but it is still impossible to enjoy music due to playback problems, often desynchronization and loss of signal, then the Bluetooth section in “Settings” will help to sort out the problem.

How to Connect Apple Airpods TWS i12. Tutorial, Unboxing and Review (Under 50). Any good?

  • From there, the wireless technology is “forgotten”, and then it is connected again, but already from scratch and without previous errors and found problems.
  • Factory reset. A radical method that should be resorted to only if the other actions did not help, the headphones are 100% serviceable and function on third-party technology from Apple.
READ  How to remove screen recording on iPhone

The “Basic” section, the “Reset” menu item will help to bring the settings to their initial form. Already from there, the network settings are either reset, or “all settings” at once. Depending on the specific situation and the problems observed. For example, when connecting, pairing or listening to music.

Why the connection might not be established

For example, you do everything according to the rules, the device appears in the list of available for connection via Bluetooth, but the connection does not occur. Or your gadget doesn’t appear on this list at all. There may be several reasons for this:

  • If you turn on the headphones, but they do not appear in the list, try pressing the pairing button on them again. If this does not help, turn off the gadget and turn it on again. Then try disabling Bluetooth on your phone and enabling it again by manually searching for nearby devices. Also try to place the earbuds as close to the phone as possible, especially for the first connection.
  • If the headphones are on the list, but pairing does not work, check to see if they are already connected to another device nearby. If the connection has already been established with another smartphone, tablet, computer or TV, the second connection will fail. You need to find this device and turn off Bluetooth on it, then the connection will be cut off and you can connect to another gadget. If you do not know what kind of device it is, just turn off the headphones, place them directly next to the phone with an active network, and only then press the power button. In this case, the gadget will connect with the device that is closer.
  • Interference from other wireless devices may cause failures. Take them away and try again.
  • If the device takes too long to connect, but there is no result, click on its name in the list and select “Unpair” or “Disconnect”. Then restart your smartphone and try again.

Why am I having connection problems

Wireless headphones not manufactured by Apple, but by third-party manufacturers. Samsung, Huawei, Xiaomi? and little-known Chinese brands. deprived of the usual magic of Airpods, when a couple of taps are enough for pairing. Therefore, before connecting audio equipment to the iPhone, you will have to double check every little thing:

  • Distance problems. Bluetooth 0 operates at a distance of up to 10 meters, previous versions of the wireless connection cover a distance of 8-9. But, as practice suggests, sometimes even 50 centimeters at the first pairing is too much: it is better to keep the headphones as close as possible to the iPhone, iPad or iPod Touch.
  • Experiments with the network. Old Bluetooth and Wi-Fi incompatibility issues are still rare today. Temporary disconnection from unnecessary network sources will help to get rid of the error. It will help, among other things, the transition to airplane mode with the subsequent forced activation of Bluetooth.
  • Restart iPhone. A banal but sure way to get rid of rare problems and temporary difficulties. Restart method depends on the version of iPhone (5, 6, 7, 8 or X): on models with Face ID, hold the side button and volume down or up keys, on phones with Touch ID. the button located at the top or side of the case.
  • Refusal to pair. If the question. how to connect wireless headphones to an iPhone has long been resolved, but it is still impossible to enjoy music due to playback problems, often desynchronization and loss of signal, then the Bluetooth section in “Settings” will help to sort out the problem.
  • From there, the wireless technology is “forgotten”, and then it is connected again, but already from scratch and without previous errors and found problems.
  • Factory reset. A radical method that should be resorted to only if the other actions did not help, the headphones are 100% serviceable and function on third-party technology from Apple.

The “Basic” section, the “Reset” menu item will help to bring the settings to their initial form. Already from there, the network settings are either reset, or “all settings” at once. Depending on the specific situation and the problems observed. For example, when connecting, pairing or listening to music.

How to connect Bluetooth

All iPhone models are synchronized with gadgets that have a Bluetooth version of at least 2.1. When buying wireless headphones, keep in mind that in order to connect and work with Apple phones, they must support at least one of the following Bluetooth profiles:

  • Human Interface Device Profile (HID).
  • Audio / Video Remote Control (AVRCP).
  • Personal Area Network Profile (PAN).
  • Advanced Audio Distribution Profile (A2DP).
  • Hands-Free Profile (HFP 1.5).
  • Phone Book Access Profile (PBAP).

To enable Bluetooth on iPhone, you need to:

  • press the button “Sleep / Wake up”;
  • click on the “Settings” icon;
  • in the window that opens, click on the Bluetooth column;
  • in the new window, move the floating button opposite the Bluetooth function to the on position (green color), the enabled Bluetooth devices will appear on the page.

Missing sound after updating the phone

  • The first thing you can do is check what settings are set for your device on the phone. To do this, click on the information icon next to the device name in the list of available ones and check that the profiles “for conversation” and “for music” are active.
  • Restart your headphones and smartphone. Check the charge level of the devices. If there is sound, but disappears and is interrupted, try checking the operation of the devices in another place. Strong electromagnetic radiation may cause malfunctions.
  • If all else fails, “roll back” to the old firmware or reset the phone to factory settings. this will help if the sound disappeared after installing any unreliable applications.
  • If the problem is mechanical: the battery is faulty, the headphone board is damaged, for example, due to water ingress, you need to contact the service center.

Step-by-step pairing instructions

Before connecting wireless headphones to your iPhone via Bluetooth, you need to make sure they are compatible. Things are simpler with the headset from the “apple” manufacturer, because they are mated in 100% of cases. In addition, they are compatible with most other non-Apple mobile devices. They all connect in about the same way. To do this, follow the instructions below:

  • Turn on your headset and activate the option to let other devices see them. Usually, all this is done by pressing only one button, although it may be a key combination (depending on the headphone model).
  • In iPhone, open the main settings menu and go to the “Bluetooth” section.
  • Turn on the desired function and wait until the list of detected devices appears, where the headset should be displayed. You need to tap on it. If everything is done correctly, the status “Connected” will appear. (do not forget to click on the “allow new devices to connect” button, if available).
  • You will also see the corresponding icon in the status bar next to the battery level.
  • To connect Bluetooth headphones to your iPhone, the headset may require a passcode. But this should be stated in her operating instructions. Therefore, it is also worth familiarizing yourself with it. It remains only to check them for performance.

How to connect Bluetooth headphones to iPad or Android

The principle of pairing devices is the same as in the previous manual. After activating the headset, turn on the wireless data transfer technology on the mobile device, find the headset and pair them. Before connecting Apple Wireless Headphones to your phone, you should know that the Bluetooth connection is actively consuming the battery power of both devices. Try to turn them off until you need them.

So, we figured out how to connect Bluetooth headphones to an iPhone. If you have any questions, you can ask them in the comments.

Wireless earphone instruction for iPhone

We discussed the theory, now, in practice, we will describe in stages how to connect a wireless earphone to an iPhone. Curiously, the wireless headset connection algorithm is common to almost all Apple devices and iPhone versions.

  • turn on the headphones;
  • we activate on them the ability to connect to a previously unknown device (usually by pressing a button and holding it for more than two seconds);
  • when the headphones become open for searching, turn on the power.
  • expect the blue indicator to flicker.

If the indicator refuses to blink, we use a special key on which you can see the Bluetooth designation. In some cases, you have to use the headphone power button. In this case, you will need to hold down the specified button.

It is necessary to achieve from the indicator exactly blue blinking.

How to connect headphones

In different models of wireless headphones, the Bluetooth function is turned on in its own way, so before connecting with an iPhone, you should carefully study the instructions for the headset. For the first time, for better synchronization, the headset is turned on next to the device. Connecting headphones to the phone is as follows:

  • on the iPhone, a line with the name of the connected wireless headphones should appear in the Bluetooth window;
  • when you click on this line, a new window will open, in which, opposite the “Synchronize” option, the floating button must also be moved to the on position (green).

How to connect wireless headphones on Android?

To complete pairing, you need to perform the following actions on your smartphone:

  • Go to “Settings”.
  • Point to the line “Bluetooth”.
  • Move the slider to activate the wireless module.
  • Tap on “Search for devices”.
  • In the list, indicate the name of the headset model with which you want to connect.

Which wireless headphones can be connected to an iPhone?

TOP 10: Best Headphones for iPhone. Wireless & Wired

  • Apple Airpods Pro.
  • Sennheiser Momentum True Wireless 2.
  • Beyerdynamic Aventho Wireless.
  • Sennheiser Momentum 3 Wireless.
  • Huawei FreeBuds 3.
  • Bowers Wilkins PI3.
  • Xiaomi Mi In-Ear Headphones Pro 2.
  • Sony WF-1000XM3.
READ  How to free up storage on iPhone

How to connect Galaxy BUDS to PlayStation 4?

Connect your USB Bluetooth adapter directly to the USB port of the set-top box. Then put it into headphone pairing mode. Now you need to configure your PlayStation 4 to send audio to your USB device.

How to properly connect wireless headphones?

  • Make sure the audio cable is not connected to the headphones.
  • Turn on the power of the headphones. The Bluetooth LED on the left earbud will start flashing.
  • Connect to headphones from your phone or player.
  • The Bluetooth LED will blink four times to confirm the connection is established.

How to connect Samsung BUDS to iPhone?

Can Samsung Galaxy Buds be connected to an iPhone? Yes. To do this, go to the Settings menu on the iPhone, select Galaxy Buds in the Bluetooth menu and click “Connect”.

How to connect wireless headphones to your phone?

  • Turn on the headphones and Bluetooth module on your smartphone.
  • Go to the phone menu, find the Bluetooth tab, enter it.
  • You will see a list of devices that are within range of the signal.
  • Click on the device name. the smartphone will try to establish a connection with it.

How to connect wireless headphones on iPhone?

Once you have activated the pairing mode, on the iPhone, go to the Bluetooth menu. Find your headphones in it among the list of gadgets within Bluetooth range. Click on the name of the headphones, and the inscription “Connected” will appear next to it, and the headset can additionally reproduce an audio signal.

How to adjust volume on Galaxy BUDS?

Open the Galaxy Wearable app, select Galaxy Buds from the device list and select Touchpad. Each Galaxy Bud has three potential settings for touch-and-hold interaction: Voice Command, Fast Surround, or Volume Up / Down.

Wireless headphones capabilities

Some modern models of wireless headphones allow:

  • answer calls;
  • end the conversation;
  • choose the optimal volume level.

In addition, while listening to music, you can often change songs using headphones by holding the volume keys. For beginners, it may also be a pleasant surprise that proprietary iPhone widgets show how much energy is left in the headphones.

Are Airpods compatible with an Android smartphone?

When connected to an Android smartphone, Airpods will be no different from regular wireless earbuds. If you have Bluetooth in your phone, feel free to connect such headphones. But for more convenience, different applications may be needed. For example, AirBatter or Asistant Trigger will help determine if you have inserted headphones into your ear to automatically start broadcasting audio. Also, the program can determine the charge of the cover and the “ears” themselves.

The following functions will be unavailable for the user:

  • Siri;
  • interruption of audio recording after the earphone is removed from the ear;
  • it is impossible to control the charge and control the power consumption of the smartphone.

It’s easy to connect Airpods to your Android phone. Also turn on Bluetooth on your phone, then open the charging case cover. Press the button on its back and wait for the charge indicator to flash white. The headphones will appear in the list of available devices, connect to them.

Why the connection might not be established

For example, you do everything according to the rules, the device appears in the list of available for connection via Bluetooth, but the connection does not occur. Or your gadget doesn’t appear on this list at all. There may be several reasons for this:

If you turn on the headphones, but they do not appear in the list, try pressing the pairing button on them again. If this does not help, turn off the gadget and turn it on again. Then try disabling Bluetooth on your phone and enabling it again by manually searching for nearby devices. Also try to place the earbuds as close to the phone as possible, especially for the first connection.

If the headphones are on the list, but pairing does not work, check to see if they are already connected to another device nearby. If the connection has already been established with another smartphone, tablet, computer or TV, the second connection will fail. You need to find this device and turn off Bluetooth on it, then the connection will be cut off and you can connect to another gadget. If you do not know what kind of device it is, just turn off the headphones, place them directly next to the phone with an active network, and only then press the power button. In this case, the gadget will connect with the device that is closer.

Interference from other wireless devices may cause failures. Take them away and try again.

If the device takes too long to connect, but there is no result, click on its name in the list and select “Unpair” or “Disconnect”. Then restart your smartphone and try again.

How to connect wireless headphones to iPhone

Wireless headphones are an extremely convenient, modern and essential accessory in life. But when purchasing such a gadget, the user thinks about correctly connecting it to the iPhone. Knowing the nuances in full and observing the sequence of actions, it will not be difficult to complete this process.

The connection algorithm consists of the following manipulations:

  • Turn on the headphones in the search mode for a new device;
  • In the Settings section on the iPhone, look for the Bluetooth item and make it active;
  • Among the devices found, click on the headphone model;
  • Connecting and displaying the charge level.

You can disconnect the headphones in the same way, performing the steps in the reverse order to what is indicated above. Also among the menu is the Forget this device option, which deletes the connection data. It allows you to conveniently and quickly eliminate the connection result.

It is enough to perform the listed manipulations once. In the future, the system will connect automatically when the headphones are activated.

Sometimes it happens that the iPhone does not see the headset. In such cases, you need to check if Bluetooth is working properly by connecting another device. It is also possible to reboot the smartphone and reconnect the power to the headphones. Please note that the connection indicator should be blinking and not constantly on. Usually, the cause of the malfunction is eliminated quickly.

Step-by-step instructions for connecting wireless headphones for Android

After the “blue tooth” has turned on on the phone, activate the headphones. To do this, press the power button, and then make a long press on the Bluetooth activation button. The indicator, if any, should blink. On the phone, in the appropriate section, select the option. Search for devices. After some time, the smartphone will offer you to choose one of the found gadgets. Most often, you can recognize your headphones by the name. If you purchased a Chinese device, then the name may be long and confusing. Just unplug your device and see what disappears from the screen.

After you have managed to find your headphones, click directly on them. you will be prompted to connect them to your smartphone. Agree. The selected device should appear in the upper list of established connections. It will say “Connected” next to it. In most cases, the same line will reflect the state of charge of the headphones.

If you have headphones in a case, then keep in mind: it is better to open the cover after you turn on the power on the device, after waiting for the ready indicator to appear.

Connecting to headphones from Apple gadgets isn’t much different. Turn them on first, then Bluetooth in the phone settings. After that, select your device in the list of found equipment and allow the connection.

Most often, Airpods are used with the iPhone, which allow you to use Siri remotely. In this case, first make sure your smartphone software is new enough. For example, the Pro version of the gadget will only work with iOS above version 13.2, the 2nd generation will connect exclusively with a device on iOs 12.2 and above.

Further, the sequence of actions is similar. Turn on Bluetooth on your phone, place the headphone case next to your smartphone and open it. An animation will appear on the screen, click “Connect”. If you have a Pro version, an instruction will appear next. With the 1st and 2nd generation, everything is easier. If Siri is not configured, then after connecting the phone will prompt you to do it.

Bluetooth earphone activation

  • Bluetooth activation is performed according to the following sequence of actions:
  • Go to the settings of our iPhone.
  • Open the section called Bluetooth.
  • We activate Bluetooth and in the list of found accessories we click on our headphones.

After completing the described steps, the phone will assign the status “Connected” to the headphones. A new designation will appear next to the battery level indicator, which indicates that the headphones are connected and ready to work.

Thanks to the function marked “i”, we can temporarily disconnect the headset or completely delete all connection information. For the latter case, the item “Forget this device” is provided.

The indicator that notifies the user about the headset charge level is called “Batteries”. When you reconnect the headphones to the phone, the device recognizes almost instantly and without user intervention.

How to connect a wireless earphone to an iPhone

Today we will talk in detail about how to connect wireless headphones to an iPhone, and what to do if an already configured headset refuses to work. Bluetooth headphones are a versatile accessory. It can be used not only with a branded phone, but also with a laptop, player, tablet and TV.

To begin with, syncing different Apple devices is especially easy thanks to the shared iOS operating system. The platform starts working incorrectly in extremely rare cases. For recent wireless earbuds, we remind you that with a microphone, you can immediately answer calls to your iPhone for added convenience.

BYRGPUB.COM 2021