Hikvision ds 2cd vc1w manual

Blog about modems, routers and gpon ont terminals.

connect, camera, vc1w

Video surveillance has recently been very actively developed by all providers. This is due to its growing popularity among end consumers. Someone buys a camera out of necessity, someone like a toy. Rostelecom now offers as many as three types of video surveillance: conventional with a video recorder, cloud-based and the so-called “smart home”. The Hikvision DS-2CD-VC1W IP camera belongs to the Rostelecom smart home concept and operates on its cloud platform. Today it is offered to subscribers at a price of about 5,000 rubles. Let’s see what we get for this amount.

We unpack and take the device in hand. The camera is quite lightweight, streamlined. There are no connectors other than USB. There is no wall mounting bracket, just a piece of double-sided tape. Honestly, even taking into account the miniature size, it’s still scary to hang an IP camera for 5000 under the ceiling using such a flimsy mount. I think that it will not survive a fall from a height of 2.5-3 meters. Therefore, its main installation site will be a table, chest of drawers or windowsill.

Connection and configuration

In order to connect the Hikvision DS-2CD-VC1W camera from Rostelecom and use it with the Smart Home service, you must have a phone or tablet running on Android or Apple iOS. Also, at home or in an apartment, there must be a wireless WI-FI network with Internet access.

After installation, launch the application and click the “Register” button. Registration in the Rostelecom Smart Home system is divided into 3 steps:

At the first stage, you need to specify your mail, mobile phone number and the area in which you will connect the IP-camera. Then you must indicate the surname, name and patronymic. At the third step, we come up with a more complicated password and enter it in the appropriate fields.

After that, an email will be sent to you with a link that you need to follow to confirm the registration.

Next, you will need to come up with a four-digit PIN-code, which will be requested when authorizing in the system from the phone.

Now you can unpack the DS-2CD-VC1W camera and plug the power supply into the mains. In the application on the smartphone, it will be necessary to indicate that we are connecting the video camera.

Please note that when turned on, depending on the settings, the camera may have a red or blue indicator. Red means the device cannot see the wireless network and is waiting for configuration. Blue is on if the camera has already been configured to connect to a WI-FI network and is operating normally. Since I connect a new kit, my diode is lit in red. I press the corresponding button in the program.

Now comes the fun part. You need to write the SSID of your WI-FI network to which Hikvision will connect, and the password to it. The application will generate a QR code that must be shown to the Rostelecom IP camera from the phone screen. After she recognizes it, the search will begin and connect her to the wireless network.

After the connection is successful, the camera parameters will be displayed on the screen. image quality and sound. After that, it will be displayed in the “Devices” section. By selecting your camera in the list, you can watch both a live broadcast and a recording that is stored in the cloud.

Camera model DS-2CD-VC1W. How to reset it to factory settings without entering your personal account?

DS-2CD-VC1W camera specifications Rostelecom

Interfaces MicroSD (SD / SDHC / SDXC) up to 64 GB, NAS (NFS, SMB / CIFS)
Wi-Fi: 2.4GHz 802.11b / g / n
Matrix type 1/4 Progressive Scan CMOS
Resolution, broadcast speed 1280 × 720 @ 25 FPS
Lens focal length 2.8mm / F2.0
Viewing angle 92 °
Lower threshold of sensitivity 0.01 Lux / F1.2; 0 Lux with IR
Backlight compensation DWDR
Compatibility ONVIF, PSIA, CGI, ISAPI
Day / Night Mode ICR filter
IR illumination range up to 10 m
Video compression codec H.264 / MJPEG
Audio compression codec G.711 / G.726
Noise suppression 3D DNR
power usage DC 5V ± 10%, no more than 3.5 W
Climatic operating conditions Working temperature: 10 ° C to 60 ° C

To attach images and create your own publications, sign in to the site

Nikolay
To reset the settings of the DS-2CD-VC1W camera, use the reset button located on the back of the camera.

To reset the DS-2CD-VC1W camera, Hikvision recommends the following sequence:

Инструкция / отвязываем IP камеру DS-2CD-VC1W от Ростелекома

Power off the camera
2. Press and hold the reset button
3. Connect the power to the camera while holding down the camera reset button
4. Continue to hold the camera reset button for 10 seconds
5. Release the button and wait for the camera to reboot.

Hikvision DS-2CD-VC1W instruction in Russian in pdf format for the device: CCTV camera. Read the instructions to familiarize yourself with the functions and operating conditions, specifications and remedies. This user manual will help you use all the functionality of the product and increase the service life, provided that all the rules set forth in the document are observed.

Blog about modems, routers and gpon ont terminals.

Video surveillance has recently been very actively developed by all providers. This is due to its growing popularity among end consumers. Someone buys a camera out of necessity, someone like a toy. Rostelecom now offers as many as three types of video surveillance: conventional with a video recorder, cloud-based and the so-called “smart home”. The Hikvision DS-2CD-VC1W IP camera belongs to the Rostelecom smart home concept and operates on its cloud platform. Today it is offered to subscribers at a price of about 5,000 rubles. Let’s see what we get for this amount.

We unpack and take the device in hand. The camera is quite lightweight, streamlined. There are no connectors other than USB. There is no wall mounting bracket, just a piece of double-sided tape. Honestly, even taking into account the miniature size, it’s still scary to hang an IP camera for 5000 under the ceiling using such a flimsy mount. I think that it will not survive a fall from a height of 2.5-3 meters. Therefore, its main installation site will be a table, chest of drawers or windowsill.

After installation, launch the application and click the “Register” button. Registration in the Rostelecom Smart Home system is divided into 3 steps:

At the first stage, you need to specify your mail, mobile phone number and the area in which you will connect the IP-camera. Then you must indicate the surname, name and patronymic. At the third step, we come up with a more complicated password and enter it in the appropriate fields.

After that, an email will be sent to you with a link that you need to follow to confirm the registration.

Next, you will need to come up with a four-digit PIN-code, which will be requested when authorizing in the system from the phone.

Now you can unpack the DS-2CD-VC1W camera and plug the power supply into the mains. In the application on the smartphone, it will be necessary to indicate that we are connecting the video camera.

Please note that when turned on, depending on the settings, the camera may have a red or blue indicator. Red means the device cannot see the wireless network and is waiting for configuration. Blue is on if the camera has already been configured to connect to a WI-FI network and is operating normally. Since I connect a new kit, my diode is lit in red. I press the corresponding button in the program.

READ  Hikvision Reset Camera

Now comes the fun part. You need to write the SSID of your WI-FI network to which Hikvision will connect, and the password to it. The application will generate a QR code that must be shown to the Rostelecom IP camera from the phone screen. After she recognizes it, the search will begin and connect her to the wireless network.

After the connection is successful, the camera parameters will be displayed on the screen. image quality and sound. After that, it will be displayed in the “Devices” section. By selecting your camera in the list, you can watch both a live broadcast and a recording that is stored in the cloud.

Compact. Easy to handle. True, in order for my phone to find the camera, I had to call the hotline, and they settled everything. And so I read the Q-code right away, I also connected to Wi-Fi.

We check reviews with photos out of line and as quickly as possible.

Score Working hours You can pick up
Izhevsk, Street 10 years of October, house 17, TC “October”, 2nd floor Mon-Sun 10: 00-21: 00, without lunch and days off Tomorrow
Izhevsk, Lenina Street, house 138, TC “KIT”, 2nd floor Mon-Sun 10: 00-21: 00, without lunch and days off Tomorrow
Izhevsk, Petrova Street, building 29, TRK “Petrovsky”, 2nd floor Mon-Sun 10: 00-22: 00, without lunch and days off Today
Izhevsk, Street Club, house 37, “TC” Planet of technology and furniture Mon-Sun 10: 00-21: 00, without lunch and days off Tomorrow
Izhevsk, Pushkinskaya Street, house 130, TC “Pushkinskiy”, 1st floor Mon-Sun 10: 00-21: 00, without lunch and days off Today
Izhevsk, Voroshilova Street, building 53, shopping center “On Voroshilova” Mon-Sun 10: 00-21: 00, without lunch and days off Tomorrow
Izhevsk, Shiroky lane, 53, Sigma shopping center, 3rd floor Mon-Sun 10: 00-21: 00, without lunch and days off Tomorrow

The manufacturer’s warranty is usually set for one or two years, but this is not always enough for expensive electronics.

Purchasing an additional warranty certificate allows you to:

  • 1.Honor has non-warranty risks, such as non-production breakdowns as a result of power surges, fire, flooding, theft, robbery, robbery, natural disasters, in addition to the possibilities of the manufacturer’s warranty;
  • 2.increase the duration of the factory warranty.

You can independently choose the time period for which you want to extend it. it can be 1, 2 or 3 years.

Why does the manufacturer of the equipment establish a warranty for one, two or in very rare cases for three years? It’s simple. The longer the equipment works, the higher the probability of breakage. But you don’t throw away your refrigerator, washing machine or laptop right after the manufacturer’s warranty expires? Of course not. But what if the equipment breaks down when the warranty has already expired? You have to pay for the repairs out of your own. And this is often a lot of money. The problem will be solved by the certificate “Additional guarantee”.

Connecting the IP Camera Cable

First of all, we will prepare the cables for connecting the IP camera to the computer. Let’s start with the power supply, since IP video cameras are quite demanding on power supply and have a sufficiently high current consumption, it is advisable not to save on the power cable. Alternatively, you can take a two-core SHVVP cord with a cross section of 0.75 sq. Mm. it is easy to install as it is flexible enough. But I will immediately warn you: the shell is afraid of the sun’s rays, so it is not recommended to lay the cord outside the room without additional protection. A corrugated pipe can act as such, but only intended for outdoor installation, it can also be used to pack a LAN cable. Next, we connect the IP camera via twisted pair.

Poe cable pinout for IP camera

We take a knife in our hands and strip the insulation from one side of the cord. Then, since this cord has an individual color for each wire, we clamp the brown conductor into the terminal of the power plug marked “”, and the blue one into the terminal marked “-“. Sequential pinout of the cable for the IP camera will allow you not to make a mistake in the future when connecting the power supply of the IP camera and will help to avoid the so-called “polarity reversal”, which can be fatal for the video camera. Happened? Fine!

For now, put the cord aside and deal with the LAN cable, strip the outer sheath of the UTP 5e cable from one side to a distance of 2 cm. (, not critical) and arrange, after straightening each one, the conductors in the following order from left to right:

  • white-orange
  • Orange
  • white-green
  • blue
  • white-blue
  • green
  • white-brown
  • brown

Then we cut the conductors to a length of 1 cm and insert them, without changing the color sequence, into the RJ 45 connector, placing it with the contact group up.

After that, we crimp with a crimper, leave the other side of the cable as it is.

Next, we insert the power and LAN connectors into the corresponding sockets of the previously installed video camera and pull the wires to the place where the switch or video recorder will be installed, well, or a personal computer, if it was decided to use it as a registration device. After connecting the cable of the IP camera, we connect the power wire to the power source observing the polarity, this is important!

We crimp the RJ45 connector to the second side of the UTP cable according to the above method and connect it to the DVR, either to a personal computer directly, or using a switch if there are several video cameras.

After checking the polarity and correct crimping of the UTP cable, you can turn on the power source to the 220 V network.

The installation work is over, we wipe the labor sweat from the brow =) and proceed to setting up.

IP camera connection via twisted pair

What is required to connect?

Let’s start as usual, from simple to complex. I propose this time to consider the nuances of the first steps of launching an IP video camera, namely. power supply and connection of the IP camera to the computer.

  • The camcorder itself
  • Power supply or PoE switch (optional)
  • A piece of a two-core cable of the required length and section (for power supply)
  • Power plug
  • LAN cable of the 5th category (twisted pair UTP Cat 5e)
  • RJ-45 connectors
  • PoE splitter (optional)

Crimper (crimp) for mounting RJ-45 connectors on a LAN cable (yes, I know, you can use a screwdriver, you can, but not needed =)), a screwdriver of the required size for mounting the power plug on a two-wire cable and connecting it to a power source, a stripper wires, free time, and of course desire, where can we go without it.

We will assume that the video camera is already installed in the required place and we just need to connect it.

The computer does not have a network connection

A modern PC or laptop has a network card, which allows you to connect an IP camera to a computer directly or through a switch. First of all, we connect the video camera to the LAN interface of the network card, or we connect the switch to the LAN, and the video cameras to the switch, if we use several of them.

After we have done this, a network connection icon should appear in the lower right corner of the screen.

Right-click on it and select “Network and Sharing Center”

In the window that appears, select “Change adapter parameters”.

Next, right-click on the “Local Area Connection” icon and select the “Properties” menu item, like this.

Then, click on “Internet Protocol version 4 and again, and what to do, click” Properties “.

And we see approximately the following depressing picture, which hints to us that the address for this PC, in general, is not assigned and there is an option to get it automatically, which does not suit us a little, since there is actually nothing to give it out. Let’s correct this misunderstanding.

READ  Ip camera does not connect to the recorder

First of all, we put a kryzhik opposite “Use the following IP address”

and these fields become available for editing:

In which we, remembering that the video camera has a default address of 192.168.1.10, that is, it is in the first subnet (as indicated by the penultimate digit of the address), we immediately enter the following values:

In the IP-address line, enter the value 192.168.1.2 (well, because the 2nd address is free, in principle, the last number can be any unoccupied address within the 1st subnet), something like this turns out:

Then we simply left-click on the “Subnet mask” field and we get this value (and this is good news) automatically:

The item “Main gateway” remains, but at the moment we have no interest in it, for the SIM you can enter any address there, let’s say 192.168.1.1 and at the output we will have the following picture:

Click “OK” at the bottom of the window and consider that the network interface settings for this option are over.

Software configuration when connecting an IP surveillance camera

So, go to the above link, select the software item, then Windows.

After that, opposite the “CMS” item, click “Details”.

Perhaps someone will have a question why exactly “CMS”, although there is also an alternative in the form of “VMS”?

It’s simple: This software was born first and why not give it the palm, and in general, it impresses me with the severity of the lines and the asceticism of the interface, and we will consider “VMS” somehow later.

So, despite the fact that there are more recent versions, we download the version from 7.03.16, because it is self-sufficient for Win 7 and does not require the installation of a plugin.

In the future, we press the Next button all the time until we see this window:

in which we click “Finish”, after which we receive an invitation to select the interface language of the installed software. Personally, I prefer Russian, but you are at your discretion.

And as expected, we press “OK”. Done, the software is installed and moreover, it is running. We should see this window

In it, we leave everything as it is, the only thing you can put a kryzhik opposite the “Auto input” so as not to receive this invitation in the future and click “Login”. If a standard firewall is running on the PC, we get this warning

Click “OK”, in the lower right corner, select the menu item “System”.

How to connect an IP camera ds 2cd vc1w

If you do not remember your password, then enter your email and you will receive a login link. After authorization, enter your new password in the profile settings.

Pictured is a 2MP IP dome camera with a wide-angle lens for indoor PD1-IP2-B2.1 v.9.4.1. with a wide-angle lens 2.1 mm, a processor of the latest generation and support for H.264 / H.264 / H. 265 / H.265

Unlinking DS-2CD-VC1W camera from Rostelecom

The first step is to understand what kind of camera it is. To do this, you need to open the case and look at the board. The board says DS-2CD1402FD-IW. This is a camera of the R2 platform and the firmware for it can be taken from the manufacturer’s FTP and prepared according to the method described in the article Unlinking cameras from Rostelecom (DS-I120, DS-I122). Or download ready.

  • IPC_R2_EN_STD_5.4.83_181011_nowebcmpnts.zip. firmware with remote WebComponents.exe;
  • WebComponents.exe. the components to be removed.

Since the camera does not have an ethernet interface, we will flash it from a memory card. To do this, copy the prepared digicap.dav firmware file onto it and insert the card into the camera slot. Preparation is over.

Беспроводное подключение по Wi-Fi камеры видеонаблюдения DS-2CD-VC1W

Now you need to disassemble the camera and connect the USB-TTL adapter to it. I found a suitable connector in my bins, and although it was 3-pin, and not 4-pin, as on the camera, it entered normally. The main thing is to correctly determine the polarity. One adapter smoked from incorrect connection.

  • 1. “Ground”, usually extreme. you can check with a multimeter. should “ring” to “ground”.
  • 2. Near ground RX and TX. If you mix them up, nothing critical will happen, it just won’t work.
  • The fourth contact does not need to be connected.

After connecting the adapter to the camera and to the USB port, we make sure that the drivers are installed on it and that a virtual COM port has appeared in the device manager. If there are several ports, then you need to look before connecting the adapter and after, in order to understand which port to work with.

Next, launch HyperTerminal, set the connection name and select the desired COM port, configure the COM port parameters: speed. 115200, flow control. No, leave the rest by default. After these steps, the connection will open and you can supply power to the camera.

As soon as the camera starts to launch, the boot log will appear in the console. The download must be interrupted to be able to send commands to the camera. As soon as the line Hit Ctrlu to stop autoboot appears in the log and the countdown starts, you need this Ctrlu combination and press. If the key combination is pressed in time, the log will stop and the system will be ready to receive commands. If the log does not stop and the camera continues to load, then either the keys were pressed at the wrong time, or the sending of commands does not work. Sending commands is treated by checking the presence of a contact and / or by correctly setting the COM port parameters. Well, pressing the key combination at the wrong time is treated with another attempt.

So, the download is interrupted, we see the command line prompt. Enter the upfsd command. If everything is in order with the card and the firmware is prepared correctly, the system will load the file from the memory card and start flashing. It will be sewn and rebooted. When flashing, the camera goes into an inactive state, so there is no need to reset the administrator password.

Now you can connect to the camera at the factory address 192.168.1.64 (or 192.0.0.64) or, more racially, find it via SADP. Through SADP, you can activate the camera by setting a password that meets the security requirements and configure the network parameters. You can also activate Hik-Connect by setting a confirmation code. But Hik-Connect still has to be tweaked. Link to the description of the setting at the end of the article.

After flashing the camera gets a web interface, but the ActiveX components WebComponents.exe have been removed from the firmware, so they need to be installed separately. This is necessary in order for the Internet Explorer browser (and only it) to be able to display video and handle dynamic interface elements. If the firmware was prepared independently, then the components could be pulled out of the image. If this was not done or a ready-made firmware was used, then they need to be downloaded from the link above. In addition, depending on the IE setting, you may need to add the camera address to trusted sources and / or enable compatibility mode.

From the very beginning, when plunging into this topic, the forum forum.videon.spb.ru helped a lot. There, in principle, the same is described as in this article, but in chronological order of trial and error. Nevertheless, the last posts are quite fresh, so I decided to present the essence in a compact manner. In addition to the compact presentation, I introduced the procedure for editing the image through NewTuxBoxFlashTools. Because all previously found ways called for editing the image by installing Linux, which is an order of magnitude more difficult and time-consuming.

ZY I wrote from memory, I could have missed something. I will try to check it on the DS-I122 camera, which can be sewn both over the network and from a memory card and add pictures. And I would also like feedback, at least in the form of “Thank you! Everything worked out!”. Constructive criticism is also welcome.!

READ  Setting up an IP camera for viewing over the Internet

How to install and configure video surveillance Rostelecom?

Knowing how to connect an ip-camera, users will need to figure out how to configure the device. To do this, in your personal account there is a special subsection with the appropriate name.

It contains control of the provided functions and parameters that can be changed. Additionally, you need to visit the “scripts” section, which allows you to make detailed and accurate settings.

To use the system, you need to switch to the “desktop”, where the main actions proposed by the developers to subscribers are available.

In addition, the operator provided for the installation of the equipment by the master, but this service is paid. Its cost should be checked with the operators of the contact center.

Unified video surveillance system Rostelecom

Not a single subscriber will use an incomprehensible service or function, the meaning of which he does not understand. This also applies to “Video surveillance” Rostelecom online.

The main purpose of this proposal is to ensure the safety of the home. With the purchased and installed equipment, users will be able to:

  • follow the events taking place at home online;
  • receive messages and notifications about important events;
  • view videos containing all significant events over the past week;
  • upload individual fragments of video clips;
  • remotely control a CCTV camera.

The listed functions are enough for the owners of the equipment to have no doubt that their house or protected area is reliably protected. And in the event of an unforeseen unpleasant situation, the user will find out about it in a timely manner and will be able to take the necessary measures to eliminate it.

Video surveillance service from Rostelecom

Modern large companies are trying to actively expand the range of services offered, adding not only standard options, but also rather unexpected connection options to their own offers. All of the above also applies to the “Video surveillance” system of Rostelecom.

The mentioned service is the most important component of the “Smart Home” company, which is distributed and connected to subscribers. At the same time, customers are able to independently choose the configuration they require, purchasing a large-scale set of devices and devices or stopping only at a video camera. But even in this case, users will have to choose between two main options that allow them to establish control over premises or external objects, for example, the camera can be installed in the entrance.

Additionally, the provider has provided a special offer for business, which allows you to establish monitoring of the selected area and receive information about all events taking place on it.

The cost

The main expenses that those wishing to install a video camera will have to face is the purchase of equipment. At the moment, the provider offers 3 main types of cameras, presented in the table below.

WI-FI camcorder DS-2CD-VC1 HiWatch DS-I120 HiWatch DS-I122
Appointment Indoor Street, cylindrical compact-network Street, dome, network
Resolution 1280 x 720 1280 x 960 1280 x 960
Viewing angle 92 ° 69.4 ° 92.5 °
IR illumination range (limit) 10 meters 15 meters 15 meters
the weight 400 gram Irrelevant Irrelevant
Additionally Day / night mode and IR cut filter Anti-vandal protection, day / night mode IR-cut filter
Operating conditions 40 to 60 degrees 40 to 60 degrees
Total with an initial payment of 1200 rubles.) 5990 (300 rubles initial payment. 1200)

Cameras for business are presented in a wider range and have different prices. Details are required to be specified in the service offices or when calling the contact center.

How to connect a video surveillance system?

The process of connecting b2b cameras can be divided into 2 main stages:

  • installation of equipment in a suitable place;
  • registration on the official website.

With the first part, users will not have any difficulties and difficulties. The second stage is to create a Rostelecom video surveillance management center. a personal account. The mentioned process contains the following steps:

  • you will have to start by visiting the official portal of the company and going to the registration page;
  • here you must enter personal information, including name, service region and contact information;
  • after which it will remain to accept the conditions by ticking the appropriate checkboxes and click the “register” button;
  • the next step is to log in to your personal account and open the “my devices” section;
  • here you will need to click on the button offering to add a device and specify that a camera will be added;
  • after which you just need to follow the recommendations of the system.

If the actions turned out to be correct, immediately after adding the device it will start working.

Tariffs for “Video surveillance

By paying for a Rostelecom CCTV camera, users will be entitled to a year of free service if the entire cost of the equipment is paid at once, or 2 years of free use of the equipment when buying in installments.

All this makes it much more important and more relevant than tariffs for entrepreneurs:

  • Base;
  • Minimum;
  • Optimal;
  • Maximum.

A description of each of them is presented in the table.

Base Minimum Optimal Maximum
View full video (number of days) 3 7 14 thirty
Uploading videos (per month) Absent 2 20 one hundred
Duration of the uploaded record (minutes) Absent thirty thirty 60
Access by links Not Not Yes Yes
Undelete videos (minutes) ten 20 60 240
Cost (rubles) 250 400 750 1200

Additionally, daily service is provided with its own prices, depending on the requests and wishes of customers. In this case, the main criteria affecting the cost are related to the storage time and the amount of information collected. Depending on them, the price ranges from 6.57 rubles. per day with minimum requests and 49.28 rubles. at maximum parameters.

How “Video surveillance” from Rostelecom works?

Having understood the purpose of the service “Video surveillance” from Rostelecom, it remains to understand the requirements and basic principles of work. Camera owners should be aware that the system requires:

  • Internet speed not less than 512 Kbps;
  • modern browser updated to the current version;
  • an application that allows you to remotely control equipment (optional).

If the above is available, it is worth focusing on the process of work. Without going into details, the whole procedure is as follows:

  • the camera takes pictures and sends videos to the cloud storage;
  • some of the records that capture someone’s activity are preserved;
  • the user himself is able to watch the rented premises live;
  • in case of suspicious activity or attempts to obscure the camera, the subscriber is notified of the incident.

In this case, the subscriber sets up the main features of the camera independently.

It is important to clarify that the number of video cameras available for installation is not limited. But you will be able to watch online no more than one at a time. To switch to recording from another device, you need to stop viewing the previous.

Advantages and disadvantages of the system

The main disadvantage of the described system will be the limited storage period for information provided by Rostelecom cloud video surveillance. There are many more advantages:

  • home safety and control of what is happening in the surrounding area;
  • the existence of remote control, if you download the provider’s mobile application;
  • special notifications about ongoing events;
  • the presence of a setting that allows you to adjust the use of the program;
  • the opportunity to purchase equipment and use it for 2 years for free.

Other advantages will become noticeable after you start using the equipment and a personal account.

BYRGPUB.COM 2021