Android phone as a modem for a computer via USB cable

It’s no secret that you can give the Internet from the phone to other mobile devices and computers. And in this article I will show how to use the phone on OS android as a modem for a computer, or laptop. When connecting using a USB cable. This scheme is suitable primarily for stationary computers who do not have a Wi-Fi module. And connect them to the Wi-Fi access point, which can also be launched on the phone, we will not succeed.

Almost all smartphones on Android can distribute mobile Internet (in modem mode) via Wi-Fi, Bluetooth, or USB cable. How to configure the Wi-Fi access point, I already showed in these articles:

But if you have a PC, or Wi-Fi does not work on a laptop, then you simply cannot connect your computer to a Wi-Fi network. In this case, you can use USB cable. Connect the phone with the computer, and enable the “USB modem” mode on the phone. And on the computer there will be access to the Internet via the phone (via mobile operator).

Когда телефон работает как модем именно по кабелю, то он сразу заражается от компьютера. And if you use it as a Wi-Fi access point, the battery sits very quickly, and it has to be connected all the time to charging.

I checked on the Samsung Galaxy J5. Everything is very simple. No need to install some drivers on the computer, create connections, etc. D. Just turn on mobile data on the phone (Internet via Edge, 3G, 4G). We connect by USB to the computer and activate the “USB modem” mode in the settings.

I think that this function works exactly the same on all phones that work on Android. I can’t check it now on phones from Huawei, Xiaomi, Lenovo, Sony, LG, etc. D., But if there are any differences in the settings and names, then they are not critical.

Android smartphone “USB modem

There is no need to configure anything on the computer at all. By the way, my computer, on which I checked everything, works on Windows 10.

Please note that in the modem mode, the computer connected to the phone will use the Internet connection via a mobile operator. Therefore, if you do not have unlimited mobile Internet, then perhaps a fee for connecting to the Internet will be charged from your account. I recommend clarifying the conditions of your tariff plan in support.

On the phone, turn on your mobile Internet (cellular data).

Next, connect the phone to the computer using a USB cable.

Then, in the phone settings (somewhere in the “Connection” section. “Access point and modem”) We turn on the “USB-modem”.

After a few seconds, access to the Internet will appear on the computer via smartphone.

And if you open the “Network Adapters” window, then there you can see the new “Ethernet” connection.

The main thing is that access to the Internet appeared on the computer. To turn off, just turn off the “usb-modem” mode in the phone settings.

Distribution methods and choice for different devices

As in the case of a home router, you can distribute the Internet from the phone to other devices. To create a network between devices, you need to enable an access point. In addition to the usual Wi-Fi, such a function will work with another wireless protocol-Bluetooth. If the transmission “by air” for some reason is inconvenient or impossible, you can take the possibility of distributing traffic using USB.

The most common tetering method is its organization with Wi-Fi means-it is it that allows you to connect devices such as a tablet, another phone or even home TV to the World Wide Web. To configure the connection on a desktop computer or laptop, you can use the USB port. this will save the charge of the battery of the smartphone distributing the Internet, and in some cases provide a more reliable connection.

Through Wi-Fi

The easiest way to give out a mobile Internet is to do it by Wi-Fi. This technology has a number of advantages:

  • a wide radius of signal coverage, its power is enough to pass through the walls;
  • unified standard. is supported by all modern devices;
  • you can build a full.fledged wireless network of several devices. The official website of Google talks about the maximum number of connected customers. it is ten.

Windows Phone

Owners of rare smartphones based on Windows Phone also have the opportunity to activate the modem mode. Consider the setting process using the example of Nokia Lumia 730.

We connect the computer

To connect a home computer to Wi-Fi, you will need additional equipment. The most economical way to do this is to purchase Wi-Fi wireless adapter. They look like ordinary USB flash drives and connect to PC in the same way.

Installation of drivers in most cases is automatically. After the installation is completed in the notification, a familiar menu will appear, offering to choose a wireless connection.

How to connect a smartphone on Android

Ways to connect a smartphone to a computer and laptop via Wi-Fi, several wires. Almost all of them require connecting both devices to one network (router). Of course, the presence of a Wi-Fi adapter on PC is mandatory.

Through ES conductor

This application is multifunctional, provides full monitoring over file objects, helps to transmit files between PC and mobile in Wi-Fi.

How To Connect Internet from Mobile to PC or Laptop via hotspot

  • Free es conductor is downloaded.
  • Starts, connects to the network operating on the computer.
  • The finger of the finger is called the menu, the section “Network” is selected in it.
  • The window emerges, it selects “Remote Access” in it.
  • Under the “Status” icon, the name of the operating Wi-Fi network appears.
  • After clicking the “Turn on” button, the address is shown that is driven into the computer.
  • After pressing the “Settings” icon, the ES conductor menu opens. Here you can use options to make communication more reliable and convenient. So, you can place a shortcut on the desktop, prohibit the server after leaving the application.

The actions in the phone are completed, then you need to go to the computer:

  • Open my computer.
  • Place the address shown in the ES conductor in the address.
  • A window with folders on the phone will open.

How to connect a phone to a Wi-Fi computer using an ES conductor is shown in this

Through my ftp server

The FTP server is universal in terms of functions performed, therefore it can be used to connect a mobile device and PC via Wi-Fi in order to transfer files. To connect the devices with this method, it is necessary to install in the mobile application FTP Server. Both the computer and the mobile should be connected to one network.

  • The FTP Server application is launched by pressing the power button. A message appears that the server is working with its address.
  • The specified address is used to connect the phone and computer. Windows conductor opens, and the address of the server ftp server address is placed. You may need to enter the login and code. this information is in the FTP Server application in mobile.
  • After the correct performance of all actions, the device is connected, on the computer all folders located on the phone become available.

FTP server can be connected to a computer in the form of a network disk. This is necessary:

  • Open my computer. Click the right mouse button select “Add new element to the network environment”.
  • Click on the “Next” button until the address line appears. Bring the server address to it. Activate the setting, clicking on the icon “Next”.
  • A network folder associated with a FTP server on a mobile device will be available in the “My Computer” window. By means of it, a quick connection is carried out with the phone to transfer files.

This video shows how to connect the phone to the computer via Wi-Fi via FTP server:

Using the Airdroid application

In addition to viewing files on a smartphone, this application provides complete synchronization of the phone with a computer. Connection to a computer via Wi-Fi is performed in several stages.

It is important to remember that the device on Android and the computer must be connected to one network. over, if a router is used, a wire connection can be used for a computer, and the smartphone will connect via Wi-Fi. If at the stage of synchronization difficulties arise, perhaps the smartphone is connected via mobile Internet.

After the synchronization is confirmed, the phone connection is performed. Almost any actions that can be performed, you can do remotely, through a computer and connecting Wi-Fi. The integration is made in the form of a separate desktop. In the upper right corner, information about the device and the amount of free memory are displayed. A little lower. the control panel with which you can send files and folders from the computer to the device.

Icons on this desktop work as menu items on the phone itself. For example, the call magazine displays the full detail of the calls. In this case, synchronization is performed in both directions. with the ability not only to view the notes, but also to delete them. Changes will be applied on the phone.

When the contacts are opened, all numbers in the smartphone memory are displayed. People from a notebook can be sent to SMS or call using a computer.

Of the interesting functions of the application, the use of the device camera on Android can be noted. There are not so many practical applications of this possibility, because the phone is already within the distribution of Wi-Fi signal.

In the same streaming mode, the video also works to connect to the device screen via Wi-Fi. When updating information, a delay may occur, but it is not so big as to prevent the work.

Airdroid also opens full access to the smartphone file system, like ES conductor. The data on the phone is transmitted through Wi-Fi both for reading and in recording mode.

How to connect iPhone to PC

iPhone can be connected to a computer via Wi-Fi if the ITUNES version from 10.5. Special applications are also used that can connect it to any PC.

So, how to connect a phone to a computer via wi-fi? Update to iOS 5 (since 2011) allowed the iPhone to connect to the “native” PC without wires.

  • The point “Synchronization from iTunes by Wi-Fi” should appear here. In this case, you can use the tube, only the icon on the screen signals the conjugation.

The installed connection of the phone with a computer via Wi-Fi allows you to exchange files (speed lower than when connecting with a cord), start backup and upload new applications from the AppStore. PC phone management is not available.

To successfully connect the devices, you need to connect to one router. After clicking on the phone “Synchronization” buttons, ITUNES should be launched on the PC and there will be a badge that notifies the tube on the “Device” tab.

  • In the opened lines, we change only the “network name” and “safety”;
  • Further “Crossing Type”. WEP;
  • We come up with a password;
  • We keep changes;

Now we connect to the new Wi-Fi network with the iPhone. Access to the file system with PC will be open through iTunes.

Windows

Consider how to connect a phone to a computer or laptop via Wi-Fi on Windows 7, 10 by. You can try to create a direct connection, but IOS system requirements should be taken into account. the WPA 2 network is not suitable, as well as the standard 802.11n. Step.by.step mating is performed like this (for example, Windows 7):

Now connect with the iPhone to the created access point. This will make it possible to connect a smartphone and a computer through a Wi-Fi.

connect, wi-fi, computer, phone

There is another way, it is easier, but at the initial stage you will need a USB cable. Further step by step:

  • connect iPhone and PC to one home network;
  • connect them among themselves through the cord;
  • PC. iTunes. review;
  • Synchronize by Wi-Fi-apply;
  • Disconnect the USB cable;
  • Phone. settings. synchronization with iTunes.

Regardless of the type of OS, such a phone connection to a computer and a laptop via Wi-Fi will control the files on the iPhone.

How do you see to figure out how to connect a phone with your PC is not so difficult. You just have to set the goal. And if you know some other ways of synchronization, be sure to write to us in the Комментарии и мнения владельцев!

Through USB cable

If there is nothing that could broadcast Wi-Fi, and you do not want to buy a USB Wi-Fi adapter, then you can distribute the Internet from a computer to a phone via USB. There will be the most problems here. Everything depends on the quality of the USB connection, as well as on the mobile OS. New versions of the Android cannot take a signal through standard means. This can be done with the help of bypass tracks, but this method may not earn.

To get started, turn on the development mode on the mobile device. Go to the settings section, select the “System” Find the “For Developers” option and quickly press it.

After a few presses, the notification “Now you are a developer” will jump out, this is just like that to become an expert on androids. There may not be such a section, then go to the “On the phone” section, and click on the “assembly number”. Now in the same section, which is available only to the developer, turn on the USB debugging, putting the lever in the “VCL” position.

Now click on the default USB configuration “. A section will open in which the species will be described with which you can connect the gadget to the stationary PC. Usually there is charging or file transfer, but you put a USB modem there. Next, stick the wire from your gadget to the USB computer port.

Go to the phone menu and click “Additionally” or “”. Click on the “Wireless Networks” option, in the section opened, run the USB Internet to work.

Go to the PC and start the “control panel”, then select the section “Network and the Internet” then “The Center for Control of Networks and General Access”.

A new connection was to open to check it, go to the section where all networks are collected. To do this, select the section on the right “Change of adapter settings”.

Click the PKM by the name of the network that receives the Internet and go to the properties section. There, open the second page with the name “access” and put the allowing flags. In the section “Connection of the home network”, select your phone. If it is not, then it will not work to give out the Internet.

On the new Android systems, everything is much more complicated:

Launch on your PC “Network and the Internet”. Click on the “Access point and modem” and turn on the “USB-modem”. The name of the new network on PC will appear, but the data transfer to it will be impossible. For use, download “Adb Run” on the phone, it is freely available and does not require money.

After loading, wait for the appearance of the main menu. Now go to Other Command and launch one of the commands called Reverse Tethering (PC Internet to Android).

Further, you will need to take turns starting 3 commands: “Install Java” to install the desired software on the computer. “Install APK” to install applications on the mobile device itself. “Run Reverse Tethering” is already to directly transmit data.

After all the commands are executed, your phone should finally start getting an Internet from the computer.

Solution of problems

When transmitting by USB, the address can be set incorrectly, then it will have to edit on its own. Call the contextual menu of the network through which you are connected to the Internet, click on the “Information” line. Opens the option “IPV4 address”.

Go to the “properties” of the network that should send information to the phone. Click on IPV4, start “Properties” again. The initial three digits we write the same as stood in the connection of the computer. We put the remaining figure so that it does not match the PC address, but there was no more than 254. If everything seems to be correctly configured, but the computer does not distribute the Internet via USB, then you can turn off the connection with the Internet and turn it on again.

There are almost no problems with distribution through Vifaya. The only problem is if the module cannot distribute it. Then it remains only to either buy an external module or use other methods.

Additional Information

I think it will not be superfluous to information on specific devices for which the Internet is set up from a smartphone. There are certain points for each device that you need to know about.

You also do not have to forget that the phone is not a router. And he cannot provide the same speed, stability of the connection and functionality. I do not recommend using the phone as a modem on an ongoing basis. It is better to install a regular, stationary router. If there is no way to conduct cable Internet, you can buy a USB modem and router, and connects to the same Yota, MTS, Beeline, etc. D.

From phone to phone or tablet

It is not rare that there are situations when you need to distribute the Internet from phone to phone. For example, when there is no network on another phone, it is not paid, traffic traffic has ended, etc. D. Or on a tablet, which can usually be connected to the Internet only via Wi-Fi.

You just need to start the Wi-Fi access point on the phone (according to the instructions above) and connect another phone or tablet to this Wi-Fi network. You can connect several devices. One phone gives out. the other accepts. Everything is simple.

From phone to computer or laptop

If you plan to distribute the Internet from a phone on a PC or laptop, then you can do this in three ways: by Wi-Fi, USB and Bluetooth. Above the article has a detailed instruction. If you have a laptop, or a stationary computer with Wi-Fi, then I advise you to use Wi-Fi. This is the easiest and most convenient option. If Wi-Fi does not work on the computer, or it is not, then complete the USB connection. Well, in extreme cases, you can try to share the Internet via Bluetooth.

As for PC, the Wi-Fi receiver there can be built into the motherboard. I recommend that you see its technical characteristics. If there is no built-in Wi-Fi, then you can use USB wi-fi adapter.

From phone to TV

Owners of Smart TV TVs with Wi-Fi can easily configure the Internet distribution from the phone to the TV. Everything is as simple as possible: on the smartphone we start the Wi-Fi access point and connect the TV to it. If you do not know how to connect the TV to a wireless network, you can see the instructions on our website. Use the site search, or see the “Smart TV TVs” section.

connect, wi-fi, computer, phone

By USB cable and Bluetooth you will not be able to connect the TV.

From phone to router

And even so you can! For example, I once distributed the Internet from my phone to the TP-Link router. On the phone (I had Android) I launched Wi-Fi distribution and connected to this network a router in WDS mode (wireless bridge). Almost every router has a WDS mode, a Wi-Fi signal, receiver, etc. D., which allows you to connect a router to a Wi-Fi phone network. The usual router has a much larger Wi-Fi radius of the Wi-Fi network than the phone.

The router receives the Internet from the phone and distributes it to other devices via Wi-Fi and on the network cable (you can connect the same PC, TV, prefix).

On our site there are instructions for setting up many routers in this operating mode. For TP-Link, D-Link, Asus, Zyxel Keenetic, etc. D. Look through the search on the site, or ask in the Комментарии и мнения владельцев, I will give a link.

There are restrictions, low speed, without access to the Internet

It happens that we set up the distribution of the Internet, everything works on the phone, connected other devices, but the Internet does not work on them. Or it works, but very slowly, low speed. Or maybe it only works for some time, after which the message appears “without access to the Internet”. It happens that SMS comes from the operator, with information about writing off a certain sum, or that the traffic limit ends.

All this can be for various reasons. For example, low speed due to the fact that your phone does not even catch 3G, but uses a 2G network. Or “without access to the Internet” on the same computer because of some kind of problems in Windows (in this case, try to distribute to another computer). But most often the reason is the restrictions on the part of the mobile operator.

I wrote about this at the very beginning of the article. Indeed, now almost all operators, on almost all tariff plans, either completely forbid their subscribers to distribute the Internet to other devices, or they limit this opportunity, or remove an additional fee for this. Even at unlimited tariffs. I already talked about this in a separate article: the Internet does not work when distributing from the phone.

If this is your case, then there are not many options:

Manage/control android phone by computer via wifi

  • Will agree to the terms of the operator (usually this is an additional fee).
  • Do not give the Internet from your smartphone. Or change the tariff to another where it is allowed to do.
  • Use a variety of ways to circumvent blocking. Actual solutions can be found in the Комментарии и мнения владельцев to the article on the link above. Only if it was not difficult to get around these restrictions earlier, then in 2020 the same MTS began to use more serious technologists to determine the “violators”. In addition to TTL, they are monitored by requests that come from the devices you connected. For example, when Windows, antivirus, or other programs are updated. There are requests that should not be when using an Internet connection only on the phone.

Waiting for your messages in the Комментарии и мнения владельцев! Ask questions, and of course share your experience!

0

37512

Sergey

Useful and interesting

one. All Комментарии и мнения владельцев are tested. 2. If you want to ask a question, then describe the problem as more detail as possible. Write specific information about the problem. 3. Комментарии и мнения владельцев with profanity, insults, and meaningless Комментарии и мнения владельцев will be deleted. four. Advertising of other sites, groups on social networks, spam, etc. D. 5. Please write correctly. Do not write in capital letters. 6. When answering a comment, please click the “answer” button.

Windows 10. All instructions for setting up the Internet and solving problems

Roter setup. Instructions for different models and manufacturers

Useful programs. for configuring Hotspot, Wi-Fi, 3G/4G modems.

192.168.0.1/192.168.one.one. Entrance to the settings of a router or modem.

Connect the phone to the computer as a USB modem

The second method by which you can connect a computer to the Internet is more complicated, but it is suitable for both a stationary PC and a laptop, while the Wi-Fi module is not required. We will analyze this method by steps:

  • You need to connect the phone to the computer using a USB cable.
  • The computer will tell you that the necessary drivers have been installed, and a window will appear on the phone screen with the choice of connection by USB. Click “Cancel”.
  • In the phone settings you need to select the “” item, and then press the “modem mode”. Here you need to click on the button that turn on the USB modem.
  • The computer will begin to install the necessary drivers. It will be necessary to allow the connection to the modem into which the phone has turned and specify the type of connection. After that, the Internet on the computer will be connected.

As a rule, the Driver Modem is installed in the memory of the smartphone itself. Sometimes similar software can be on the disk complete with the device. We also pay attention to those who use a computer with the operating system older than Windows 7. To connect the Internet through a cell phone in this way, all the necessary drivers will have to download and install it yourself.

Connect the Internet laptop via the phone C Windowsphone

On the smartphone you can activate the distribution by Wi-Fi. To do this, the user will first need to enable data transfer on the device itself. You can distribute the Internet on 2G 3G and even 4G networks.

First you need to go to “Settings”. After finding the “data transfer” item and click “Turn on”. After that, it will be necessary to go to the network settings. There choose the section “General Internet” and click “Turn on”. After click on “install”. Thanks to these actions, Wi-Fi will be heard on Windowsphone. So that it is faster, you can put the phone near the window.

What you need to connect

To connect to Wi-Fi, you need two things: to be in the area of ​​the network signal, as well as know its name and password. When you connect a mobile phone to your home Internet, all the necessary information can be viewed on the router. To connect to the network in the cafe, you need to find out the password from the administrator. For a non.parallel connection of WPS, access to the router is necessary. In some cases, additional information will be required: IP address or the address of the proxy server to configure Wi-Fi on the phone manually.

In different operating systems, the Inte Weights differs, however, the algorithm is the same: you need to turn on Wi-Fi on the phone, find the right Wi-Fi network and enter a password. We will analyze these actions in step.by.step instructions.

Android

To connect Wi-Fi on the Android smartphone through a router, we first check whether Wi-Fi is turned on. Open the panel at the top of the screen. Just pull her with your finger down. There you will see a wi-fi icon. If he is not active, click on him.

If you do not have such a badge in the panel, Wi-Fi will have to turn on through the smartphone settings. This is usually the image of the gear in the menu or on the main screen.

In the settings, you need to find the section “Network and the Internet” and activate a wireless connection there by moving the Wi-Fi switch to the “VKL” position.

Now we move directly to the connection to the network.

In the section “Network and the Internet”, click on Wi-Fi. A list of available networks will appear. Choose the one you are going to connect. In the next window, you will need to enter a password and click “Connect”.

When the connection is installed, the wi-fi icon will appear at the top of the screen.

If the router to which you connect is active, the WPS function is active. You can enter the network without a password. To do this, in the Wi-Fi section on the phone, select “Additional Functions” and click “WPS button”.

After you do this, press the WPS button on the router. It is usually located on the case on the side.

This is a convenient and quick way to connect to Wi-Fi. However, such an option is not on all phones. If you have not found it, then you have to enter a password.

Everything works here just as simple. Open “Settings” and find the section “Wi-Fi”. We move the flag to the “inclusive” position.

Search for available Wi-Fi networks will start automatically. Choose the right one and click on it. In the next window, enter the password.

For some reason, IOS developers have forgotten about WPS, so this method of connection is not available.

Windows Phone

Configure Wi-Fi with a phone under Windows you can according to this scheme. Open the list of programs and find the “Settings” item there. Go to Wi-Fi section. Here, as well as in the two previous cases, you need to transfer the switch to the “inclusive” position. After that, the phone will display wireless networks nearby. Select the necessary, click on it and enter the access key.

Connection to a hidden network

Some networks may not be visible, since the administrator turned off the SSID broadcast on the Router (network name) for security purposes. You can also connect to such a network, but for this, in addition to the password, you need to know its name.

The connection algorithm is this. On Android in the Wi-Fi section, click the “Add network” button.

A window will appear in which you need to enter the SSID network, indicate the type of encryption (usually WPA/WPA2. PSK) and enter the password.

This procedure must be done once. In the future, the smartphone will be connected to a hidden network automatically.

The iPhone performs exactly the same actions. In the Wi-Fi settings, click “Another Network”, enter its name, indicate the type of protection and password.

If iOS does not want to connect to the network, maybe you need to configure the connection manually.

How to connect the phone to the computer via a USB cable?

The transfer of documents using a cable is the best option, if it is necessary to send a large amount of data in a short period of time, since the transfer of Wi-Fi, although more convenient, is more slow. Try to use the standard cord that came with the kit to avoid unforeseen conflicts and problems.

If you first connect the device with PC, then Windows will start loading the drivers, which will take from one to ten minutes. Be patient, you can look at the progress of the installation through a pop.up window that will appear when connecting.

Usually the installation passes without problems, but sometimes there is a failure and not all drivers are pumped. About how to deal with this, read below in a separate paragraph.

  • After processing the drivers, the operating room will offer to choose what to do with the new device;
  • Now the device is displayed in the list of portable devices;
  • To see them, open “My computer”, then click on the icon with the name of your phone model, and you will get into the root catalog (if a memory card is installed, you first need to choose what to work with: with it or built.in storage).

Next time, there will be no components for compatibility. Therefore, the smartphone will be determined immediately. If something does not work out, reboot your mobile phone, PC, and then try to do the manipulations described above again.

USB connection

Go to the conductor again and check so that the phone starts to display. You can try to retake the phone so that the computer try to identify it yourself.

Android phone as Wi-Fi adapter for a computer

Today in the Комментарии и мнения владельцев I was asked a very interesting question. Is it possible to use a phone for a computer on an Android adapter as a Wi-Fi. So that the phone, or tablet is connected to the Wi-Fi network, and in the mode of the USB modem, the cable transmitted the Internet to a stationary computer. Who does not have an adapter Wi-Fi and, accordingly, there is no way to directly connect to wireless networks. And as it turned out, you can.

For some reason I never had such a need, and I was not interested in this issue. kind of from the second version, Android appeared modem mode. And almost all phones and tablets can distribute the Internet to other Wi-Fi, Bluetooth devices and USB cable. But as it turned out, Android devices can be divided not only by mobile Internet (Edge, 3G, 4G). but also Wi-Fi. And this means that a full Wi-Fi adapter for PC can be made from the phone.

This is a very useful function. It is not rare that after installing a router, or PC purchasing there is no way to stretch the network cable to the computer. And using this function you can connect it to the Internet. Let it temporarily, until you buy an ordinary Wi-Fi adapter (what I wrote here, and you can read about how to choose an adapter here).

I set everything up and checked on the Samsung Galaxy J5. I found only one. I understand that on other phones and tablets, with another version of Android and the shell, the settings may differ slightly. But I think it’s not critical. You will figure it out. Or ask in the Комментарии и мнения владельцев if you cannot find the settings.

I also want to add that the connection to the Wi-Fi network via the phone works very stable and quickly. The Internet on the computer “flies”. Good wireless modules are installed in the phones (not for everyone, of course).

We connect a computer to a Wi-Fi network via Android device as an adapter

First I advise you to turn off the mobile Internet on your phone. Just turn off the data transmission through the cellular network. It’s just in case. To know exactly that Wi-Fi connection is used.

Of course, your phone should be connected to a Wi-Fi network.

Using a USB cable, connect the phone to the computer. He will work not only as an adapter, but will also become infected.

We go to the settings on the phone, to the “connection” section, then go to the “access point and the modem” and turn on the “USB modem” (general access to the Internet connection on this phone).

Access to the Internet will immediately appear on the computer via the phone.

Just another network adapter will appear. I have Ethernet 4 (Remote NDIS BASED Internet SHARING DEVICE). You may have another. It doesn’t matter.

To stop using your smartphone as a Wi-Fi receiver, just turn off the “USB-model” function in the settings, or turn off the phone from the computer.

In the same way, you can use the tablet on Android.

I hope this article is useful to you. Be sure to leave your reviews in the Комментарии и мнения владельцев.

154

177741

BYRGPUB.COM 2023