How to connect a Samsung monitor as a TV

Posted on : 16.03.2021
Samsung 

How to connect your phone to a TV via Wi-Fi Direct

A wireless connection, in which a mobile device and a compatible TV are connected directly via Wi-Fi, without the need for a router. TV in this case acts as an access point to which the smartphone is connected. And you can transfer media files to the big screen using the standard Send menu.

What to do

  • Connect your smartphone and TV with a compatible cable. If you are using an adapter, insert it into the gadget and connect a regular HDMI cable from the TV to it.
  • Select the appropriate HDMI connector as the signal source on the TV.
  • The image will automatically appear on the TV. If this does not happen, open the smartphone settings and change the screen resolution.

How to connect your phone to a TV via USB

The easiest way to connect, allowing you to use your mobile device as a flash drive. True, only media files stored in the phone’s memory can be played back: photo, video and audio.

7 ways to connect your phone to your TV

USB, HDMI, Wi-Fi. choose what you like best and watch content on the big screen.

What to do

Connect your TV to your phone using a USB cable.

howyoutube.ru

Select the USB port as the source on the TV.

tehnopomosh.com

If necessary, confirm the connection mode on the phone.

crabo.ru

The large screen will display the folder structure or list of files that the TV has scanned and recognized. Exactly what you see will depend on the device model.

connect, samsung, monitor

citilink.ru

Use the remote to navigate and view.

ashleighmoneysaver.co.uk

How to connect your phone to a TV via HDMI

  • Suitable phone: Android smartphone, iPhone.
  • Which TV is Right: Any with HDMI.
  • What else you need: a phone-compatible HDMI cable or adapter.

This option allows you to use the TV as an external display while playing games, watching movies and surfing the Internet. The picture from the mobile device is mirrored, that is, everything that happens on the smartphone screen is displayed on the TV.

Depending on the phone connector, you will need an appropriate adapter or cable to connect. On the one hand, it will have an HDMI connector, and on the other, microUSB, Lightning or USB-C. In the mode of broadcasting the image, the device is quickly discharged, so usually adapters have a connector for charging.

Before purchasing a USB-C adapter, please make sure your smartphone supports video output.

What to do

  • Open the network settings on the TV and turn on the Wi-Fi Direct function.
  • On your smartphone, go to Settings → Wireless & networks → Wi-Fi → Wi-Fi Direct.
  • After scanning for available devices, select your TV.
  • Use the “Send” menu on your smartphone to transfer photos, videos and audio to TV.

How to connect phone to TV via DLNA

This time the connection goes through a router. In this case, the TV can be connected to the home network with a cable, and the smartphone can be connected via Wi-Fi.

DLNA capabilities allow you to view media files from your mobile device on a large screen.

How to use (set up) a TV as a monitor

New generation electronic devices are manufactured in such a way that they can interact with each other if necessary. This is done in order to simplify the process of operation by the user. A striking example of such collaboration was the use of a television as a monitor. A TV receiver connected to a PC is capable of displaying any information displayed on it.

Many will wonder: why connect a TV as a monitor. There may be several reasons for this:

  • failure of a stationary computer monitor;
  • comfortable viewing of films on a large high-resolution screen;
  • the need to make a presentation to a large audience;
  • computer games with gamepad.

As you can see, such a need can arise for almost every user. Using your TV as a computer monitor will give you a home theater experience in your room. Streaming TV does not spoil its customers with high quality content. But from a PC you can stream 4K and Ultra HD video files to the big screen.

How to use a TV as a monitor

The process of connecting a TV receiver to a computer should not cause difficulties and will be clear to every user. The most common way to do this is by cable connection. You just need to first study all the external interfaces of the computer and TV and find the same connectors. There are several types of video outputs:

  • VGA is an obsolete type of connector that is used to transfer images;
  • DVI is a more modern interface for transferring graphic content. Separate audio cable required for audio playback.
  • HDMI is a universal connector that allows you to transfer high quality video and sound to other devices.

All devices of the latest generation have HDMI output for transferring graphics and audio files. After connecting the cable to your computer and TV, you need to make simple settings. To do this, go to the outputs section in the TV receiver menu. There, among the proposed options, we activate the method used (in most cases, this is HDMI output).

On the computer, you need to go to the screen settings menu and select the TV monitor as the main display. It is better to set the resolution recommended by the system, and if necessary, a more accurate image correction can be made in the TV receiver menu. We save the changes made by pressing the “Apply” and “OK” buttons. After that, you can use the TV as a monitor.

How to connect a TV instead of a monitor via Wi-Fi

A wireless connection between a TV and a computer is much more convenient than a cable one. Firstly, the length of HDMI or other cable is limited and forces you to place the system unit or laptop in close proximity to the TV screen. Secondly, fewer cables will be involved, which makes the appearance more attractive.

It is important to remember that for comfortable viewing of high-definition video, a data transfer rate of 30 Mbps or higher is required. There are three ways you can set up your TV as a monitor over Wi-Fi:

  • Establishing a DLNA connection. This method allows information to be transmitted wirelessly within a home LAN. To do this, you need to enable network discovery and file and folder sharing in the PC settings. You can activate this feature in the “Network and Sharing Center”. Then, in the TV menu, you need to select the wirelessly connected device.
  • Via WiDi software (Miracast). This utility is a home media server with which it is very convenient to duplicate the playback of any content to external devices via Wi-Fi.
  • Using an external Wi-Fi adapter. This method allows you to establish a wireless network between your computer and TV. It is applicable for TV receivers that do not have their own integrated Wi-Fi adapter.

Benefits of using a TV instead of a monitor:

  • improved image quality;
  • larger screen diagonal;
  • the ability to use a TV receiver as an additional monitor;
  • convenient for computer games with a gamepad.

Disadvantages of using a TV instead of a monitor:

  • inconvenience in working with a PC in close proximity to a large TV;
  • increased eye strain;
  • when working in graphic editors, the TV screen is not able to convey a picture of high detail;
  • most of the Internet content is not adapted for large monitors.

How to connect Windows 10 to a TV via HDMI?

  • Enter the TV Menu and find the Input List item. It can also be called up by pressing the “Input” key on the remote control.
  • In the list that appears, click on the input source: HDMI.
  • After that, the image from the computer should appear on the TV.

How to connect Samsung Smart TV to computer as a monitor?

  • Insert the cables into the corresponding connectors on the TV and PC.
  • Insert the plug into the audio input on the TV. It is designated Audio-In.
  • Turn on the computer and TV. Go to the parameters (settings) of the TV and select the signal source. VGA, DVI, depending on the selected method.

How to use a TV as a monitor for a smartphone?

  • Open network settings on your TV and turn on Miracast.
  • On your smartphone, go to Settings → Display → Wireless Monitor and enable the.
  • Select your TV from the list of found Miracast devices.
  • The image from the smartphone will appear on the TV screen immediately after connection.

How to enlarge the image on a Samsung TV?

  • Enter the TV menu. How to enter the menu: How to find out the series and year of production of the TV On the keypad, press the “MENU” button.
  • Select “Image”.
  • Select “Picture Size”.
  • Select “Picture Size” again.
  • Choose the right size from the list.

How to enlarge the image on the TV screen?

You can also enlarge the screen on your TV according to the following instructions:

  • Press the “Format” button on the remote control.
  • Set the optimal format or reset the settings.
  • Activate the “Auto-fill” mode.
  • Set the “Fit to screen” mode.
  • Enable “Auto Scale”.

How to display PC screen on TV?

  • On the computer, go to the folder with media content
  • Hover over the desired photo, video or audio.
  • By clicking on the right mouse button, we find the “Transfer to device” section (on the seven it will be displayed as “Play to”).
  • In the provided list, select the TV

How to Cast Computer Screen to TV via HDMI?

We connect the computer (laptop) to the TV using an HDMI cable. Plug one end of the cord into the HDMI out of your computer and the other end of the cord into the HDMI in of your TV. To avoid degradation of the picture and sound quality, do not connect the DVI-out (via an adapter) of the computer to the TV HDMI-in, and vice versa.

How to connect PC to Samsung Smart TV via:

We can connect a computer to a TV in two main ways: wireless and wired. The advantage of the first is ease of use, since there is no need to buy a cable and conduct it. But in the wired version, the signal is more stable and reaches the TV faster. If response time is important, we recommend that you prefer this option.

All modern TVs from Samsung support DLNA, which makes it possible to set up PC synchronization with the TV. Of the necessary tools for the implementation of the idea: the All Share application (it is already preinstalled on the TV) and a high-quality Wi-Fi network.

How to connect Samsung Smart TV to computer via Wi-Fi:

  • Right-click (RMB) on the connection and go to “Network Control Center”.
  • Select additional parameters from the left menu.
  • We activate the sections “Enable Network Discovery” and “Enable Sharing”.
  • Click on the “Save changes” button.
  • Installing the All Share application.
  • We launch it and register the device (button on the main screen).
  • Turn on the TV and press the “Smart Hub” remote control button.
  • Launch the AllShare Play application (it should be available on the home screen).
  • Select a file from a computer or switch to wireless screen mode.

Important! All Share is currently not actively supported on PC, so it is appropriate to use alternative programs for creating DLNA servers. Here are some good options: Home Media Server, Plex. Serviio.

Another proprietary application has similar functions. Smart View. With its help, we can transfer the image from the work screen to the TV, as well as control TV from mobile devices.

This is a simpler in concept, but difficult to implement method, how to connect Samsung Smart TV to a computer. All there is to it. connect TV to PC via HDMI cable.

Tips on how to connect your computer to Smart TV:

  • The computer must have a free HDMI slot. Not all PCs have an additional port, if there is only one and you also need to connect a monitor, you will have to constantly rearrange the cables, which is very inconvenient.
  • Make sure the computer can handle image processing. The disadvantage of this method is that work with a picture is performed on a PC, and a ready signal comes to the TV. Thus, the TV hardware is practically not used, and the computer works under greater load.
  • A cable connection is inconvenient for a TV set in another room. Better to use the wireless option.
  • It is better not to buy a cable longer than 5-10 m, as the signal may be lost.

What is All Samsung TV?

We have already mentioned the All Share application, but now we will only tell you more about its functionality. The main task of the program is to provide easy interaction between smartphones, tablets, computers and TV. With its help, we can play video on a large screen, as well as include music. File exchange between a number of devices is also available.

How to connect a computer to a Samsung Smart TV?

A television can perform many more functions than broadcasting TV channels. One of the possible modes of operation is as a device for duplicating an image from a computer. This will allow you to quickly turn on any movie from the Internet, hard drive and simply display the picture from the monitor, improving the user’s gaming experience. There are many more situations for synchronizing TV with a PC, but our material is not devoted to researching the reasons, but how to connect a computer to a Samsung Smart TV.

Smart TV control from a computer

The control method depends on how you connect your Samsung Smart TV to your computer. If we are talking about a wired connection, then all data from the PC monitor is automatically transmitted to the TV (if the playback mode is HDMI). In the case of a wireless connection, the algorithm is slightly different.

How to play a file on a TV from a computer:

  • We open the program in which the DNLA server was created.
  • Select the folder where movies or videos are stored.
  • Click RMB on a file of a suitable format and select “Play on”.
  • We indicate the TV, which should have previously been synchronized with the PC.

The TV does not see the computer, what to do?

The question is how to connect Smart TV to a computer. there are pitfalls that can interfere with synchronization.

  • If a wired connection is established, we check the health of the cable and connector on the computer.
  • Switch the TV to HDMI playback mode. In the “Source” section, set “HDMI”, the option can also be moved to the main screen or available using the button on the remote control “Source”.
  • Updating drivers for your computer.
  • Install another DNLA server. Replacing a program often helps.

Unfortunately, sometimes the program for transferring the picture gets update curves that prevent communication between the PC and TV. For example, the crooked update from March 3, 2020 to Samsung Smart View broke many functions, including the detection of external devices.

Connecting a TV to a computer is not a difficult task, but you also need to figure it out, otherwise it is easy to make a mistake. We have shown the main methods for transferring images that really work and do not require unnecessary adjustment manipulations. The reader only needs to choose a wired or wireless connection option.

How to connect a laptop to a TV

We connect the laptop to the TV via HDMI cable.

  • Connect the cable to the HDMI output of your laptop.
  • Insert the other end of the cable into the HDMI input of your TV.
  • On the remote control of your TV, press the button responsible for selecting the source of the displayed signal.

Modern flat panel TVs, like computers, are digital devices. Through HDMI, it became possible to transmit high quality video files simultaneously with audio transmission.

High-Definition Multimedia Interface or abbreviated. HDMI, in translation: high definition multimedia interface. Most video cards provide the ability to connect a computer to a TV via HDMI.

How to connect HDMI to TV

Shutdown. We turn off both devices so as not to burn the ports. We connect the computer (laptop) to the TV using an HDMI cable. Plug one end of the cord into the HDMI out of your computer and the other end of the cord into the HDMI in of your TV. To avoid degrading the picture and sound quality, do not connect the DVI output (via an adapter) of the computer to the TV HDMI input, and vice versa. The connectors must be the same.

Loading. The cable is inserted. Turn on your TV and computer. Windows will boot on the connected computer. It will become clear that the TV is connected to an external source by the slight blinking of the screen. Do not forget to put the TV in AVI mode, it receives signals from an external source (connected computer), and not from an antenna. In AVI source mode, select the appropriate HDMI input of the TV.

Customization. Adjust the picture to connect your laptop or computer to the TV. On the computer desktop, open the context menu with the right mouse button.

In Windows XP, select Properties, click the Options button. Click the “Advanced” button, select the appropriate value. The TV screen displays the desktop of your computer.

With Windows 7 and Windows 8 installed on the computer, right-click on an empty space, select “Screen Resolution”. Find the line “Screen” and choose the appropriate option. The connected TV is not automatically detected? In the same window, click the “Find” button.

Wait for the TV search to finish. Set the maximum screen resolution by selecting “monitor” and “refresh the screen frequently” in the tab.

At the top in the “Screen Settings” we determine which screen we have the main (1st) and additional (2nd).

You must click “Define”. You will see the number “1” on the TV screen, the number “2” on the computer / laptop screen. To remedy the situation, in the “Screen Resolution” window, click on the screen “2”. Check the “Make the main monitor” checkbox and click the “Ok” button.

If necessary, in the properties of the video card, adjust the resolution of the desktop size, color correction.

Reboot. Reboot your computer. Changes to settings will happen automatically.

To connect you will need:

Cord “S-Video. S-Video ”(with“ S-Video ”plugs on both sides, see Fig. 3) for transferring video from a computer to a TV.

Select the length of the cord depending on the distance from the computer to the TV to be connected. It is better to buy a shielded cord (its cost is higher, but the image will also be better), although it is often possible to achieve good quality with the help of the cheapest copies.

If you want to transmit not only video, but also sound to the TV, you will also need a jack cord. two tulips (see Fig. 4). Its length should correspond to the length of the video transmission cord.

Important. Before each turn on / “unplug” the plugs to / from the connectors of the computer and TV described below, ALWAYS disconnect them (computer and TV) from the power supply.

DVI, VGA

See pictures for DVI and VGA connectors.

Computer and TV must be equipped with one of these. When choosing an option between DVI and VGA, preference should be given to the first, and only if it is absent, use the VGA interface.

If a decision is made to connect via VGA, but the computer has only one such connector and it is occupied by the main monitor, you can use the “DVI to VGA” adapter and turn the free DVI connector of the video card into another VGA (see Fig.).

Only video is transmitted via the DVI and VGA interfaces. Therefore, to transfer sound from a computer to a TV, in addition to the DVI-DVI or VGA-VGA cable, you will also need an additional audio cable with 3.5 plugs on both sides.

S-Video / SCART

The method described below is suitable for old TVs and the same old computers. It implies that the computer must have an “s-video” output and the TV must have a wide 21-pin scart connector.

Make sure that your computer’s video card (near the monitor connector) has a small connector similar to a standard connector for a mouse or keyboard, labeled “s-video” (see Figure 1). The TV to be connected must have a wide 21-pin SCART connector (usually located at the back of the TV (see Fig. 2).

Samsung B2330H Monitor as TV

Connection procedure:

Disconnect the TV and computer from the power supply;

Connect a cable to the HDMI connectors of the computer and the TV;

Specify the HDMI connector as the source in the TV settings. Most often, this is done using the “input” or “source” button on the remote control;

Make changes to computer settings:

You can learn more about setting the screen resolution here.

Physically connecting the TV to the computer

The physical connection method depends on the technical capabilities of the TV. The TV can be equipped with an RJ45 connector (normal network connector, see the image above), a Wi-Fi module, or both at the same time. A network cable connection is considered faster and more reliable, therefore, if possible, this option should be preferred.

I will not consider connecting a TV via Wi-Fi, since it practically does not differ from connecting other devices, and every schoolchild today knows how to do this.

With a network cable, you can connect the TV directly to the computer. If the computer is connected to the router and its network card is already busy, then the TV can also be connected to a free connector on the router.

In the first case, it will be necessary to “manually” make certain changes to the settings of the network card of the computer and TV (about them just below), in the second. the router will independently make all the settings and automatically ensure the interaction between the computer and the TV.

The router option is not always acceptable. The fact is that watching video on a TV from a computer creates a serious load on the router, as a result of which there may be malfunctions in its operation, manifested by a slowdown or loss of Internet connection. In this case, it is not advisable to buy a more expensive and efficient router. It is better to install an additional network card in a computer specifically for a TV. It will cost approximately 5-7 dollars. USA, the new router is 10 times more expensive.

As mentioned above, when the TV is directly connected to the network card of the computer, it is necessary to configure them, namely, to register the parameters of interaction via the IP protocol in the settings. One of the settings is shown in the table.

IP address Subnet mask Gateway DNS server
A computer 192.168.1.1 255.255.255.0 . .
TV set 192.168.1.2 255.255.255.0 192.168.1.1 192.168.1.1

If there are 2 network cards installed in the computer, the specified settings need to be made only in the properties of the one to which the TV is connected.

How to connect a TV to a computer

Almost every TV, including the old CRT, can be connected to a computer or laptop.

All options for connecting a TV to a computer can be divided into 2 types:

Connection as a monitor (single or additional). In this case, the video, music, photo and other files displayed on the TV will be played by the computer.

Connecting a computer to a TV to play files stored on a computer using a TV. In fact, the computer in this case will perform the functions of a regular flash drive. But this method is only possible for modern TVs equipped with built-in players.

You can connect a TV as a monitor using one of the following connectors:

Examine the connectors on your computer and TV, and based on their type, select the connection method that suits you. Below you will find images of each of the indicated connectors, as well as recommendations on how to connect the TV to a computer using them.

HDMI is by far the preferred option for connecting a TV to a computer. Through it, in addition to high-definition images, sound is also transmitted.

TV and computer (laptop) must be equipped with an appropriate connector (see image), the physical dimensions of which are: width. 14 mm, height 4.5 mm.

To connect, you need an HDMI to HDMI cable (with an HDMI plug on both sides).

Video cards of some computers may be equipped with a mini-HDMI connector instead of the usual HDMI. In this case, in addition to the cable, you will also need a mini-HDMI to HDMI adapter, which most often comes with such a video card (or purchased separately).

Wi-Fi or RJ45 (network jack)

To implement such a connection TV must meet 2 requirements:

1) be equipped with its own player of multimedia files (roughly speaking, be able to read video files, music or photos from a flash drive);

2) support DLNA technology and have an RJ45 connector (regular network connector) or a Wi-Fi module.

DLNA (Digital Living Network Alliance) Is a technology that allows devices on a home network to exchange multimedia files in real time. The TV, thanks to this protocol, will be able to play files located directly on the hard disk of the computer, without the need to transfer them to a USB flash drive or removable hard drive.

The process of connecting a TV to a computer via DLNA protocol consists of 2 stages:

Connection procedure:

Disconnect the TV and computer from the power supply;

Connect the connectors of the computer and the TV with a DVI-DVI or VGA-VGA cable (depending on the selected connection option);

Connect the audio output of the computer to the audio-in connector of the TV using the purchased audio cable;

Specify the DVI or VGA connector as the source in the TV settings (as appropriate). Most often, this is done using the “input” or “source” button on the remote control;

Extend your computer desktop to a second monitor. This requires:

How to make a second monitor your primary Windows 10?

In order to make monitor 2 monitor 1, you just need to go to the “Screen Settings” section, “Display”, click on monitor 1, and the place under the “Make the main display” checkbox will become active. And after that, they swap places, monitor 1 becomes monitor 2.

Can I connect my phone to a TV via HDMI?

So, in order to connect a smartphone to a TV using HDMI technology, you need to connect an MHL adapter to a smartphone. Then a regular HDMI cable is connected to the adapter. The second side of the HDMI cable connects to the TV. on its back or side wall you can find a port or ports for connection.

How to connect Samsung Smart TV to computer as a monitor?

  • Insert the cables into the corresponding connectors on the TV and PC.
  • Insert the plug into the audio input on the TV. It is designated Audio-In.
  • Turn on the computer and TV. Go to the parameters (settings) of the TV and select the signal source. VGA, DVI, depending on the selected method.

Is it possible to connect an old TV to the Internet?

If you have a very old TV with only tulip connectors on the body without Internet and WI-FI support, then it can also be connected to a wireless network. To do this, you need to purchase a separate TV box for Android. She will already have all the necessary connectors for comfortable work.

How to connect TV to TV via HDMI?

We connect the laptop to the TV via HDMI cable

  • Connect the cable to the HDMI output of your laptop.
  • Plug the other end of the cable into the HDMI input of your TV.
  • On the remote control of your TV, press the button responsible for selecting the source of the displayed signal.

How to connect a TV as a second monitor via HDMI?

We connect the computer (laptop) to the TV using an HDMI cable. Plug one end of the cord into the HDMI out of your computer and the other end of the cord into the HDMI in of your TV. To avoid degradation of the picture and sound quality, do not connect the DVI-out (via an adapter) of the computer to the TV HDMI-in, and vice versa.

Is it possible to connect two TVs via HDMI?

No, nothing will be broadcast on the second TV. At most, if the first TV has a corresponding function, then from one of the HDMI ports, you can broadcast sound (ARC function. audio return channel). HDMI is not an output or an input, it is a port and on the TV it still performs the function of an input.

We turn the monitor into a TV with our own hands

What is the way out of this situation? It’s very simple, convert the monitor into a TV, especially since it’s really not difficult to do it. Firstly, today, probably, everyone has a computer monitor. Secondly, even if it is not there, then a new one is still much cheaper than a TV device.

How to make a TV from a monitor? There are several different ways. Everyone can customize the TV with their own hands, the main thing is to follow the instructions. In the future, it can even be used to receive cable channels.

TV from an old CRT monitor

Cathode ray tube displays have lost their popularity with the advent of liquid crystals. However, few people sold or threw away the CRT monitors that were out of use, the prudent owners hid them, as they say “for later.” Actually, today the moment has come when you can make a TV out of the old screen, breathing a second life into unnecessary equipment.

The main condition is the presence of a VGA connector, without this interface it is absolutely impossible to turn an old CRT monitor into a full-fledged TV device. However, all old screens were equipped with this port for connecting a PC system unit.

If you know absolutely nothing about the connection diagrams, basic computer components, then you will hardly be able to turn the old monitor into a TV set; certain skills and knowledge will still be required to achieve the set task.

The following components and components are needed for the product being created:

  • The most important functional device of television equipment is the module responsible for adjusting the color of the image. The quality of the broadcast picture depends on the correct operation of this node.

Color module from TV AIWA TV-1402KE

Samsung TV control unit UE32F4500AKXKZ

To make a TV yourself, connect the missing nodes and insert them into the screen case, having previously connected them with loops with other base modules. It is possible that resistors will be needed to enhance the image quality; they need to be soldered. Then a comprehensive check is carried out.

TV from LCD monitor

The modern consumer is gradually abandoning the stationary PC. It is not surprising, because you can buy more compact and no less functional laptops, netbooks. Therefore, if you have a liquid crystal monitor, then do not rush to throw it away or sell it, since you can make a TV from it.

  • splitter and cable for connecting digital television;
  • antenna and cable for its connection.

To connect a new TV, you need at least 2 sockets. for the tuner and the power adapter. Connect the antenna cable and plug in the plugs. On the back side, you need to attach the tuner and the power adapter.

The tuner is equipped with a built-in speaker, its sound will fully satisfy the needs of an ordinary user. Aesthetes and music lovers will have to additionally purchase an external speaker system to expand the range of the sound range. What options? For example, you can take a soundbar or DK with a subwoofer, even ordinary speakers will do.

The TV from the LCD monitor will perfectly catch the channels, but TV broadcasting in HD quality will remain unavailable. perhaps this is the main drawback.

If we compare the image quality of liquid crystal and CRT displays, then the preponderance is on the side of the first.

How to make a TV with a high-quality picture from a monitor? When making a TV from a monitor, you must take into account several important points that largely determine the image quality:

  • signal response time;
  • viewing angle;
  • illumination;
  • depth of dark tones;
  • contrast.

710 monitor LG, like LCD from other manufacturers, has a long response to the signal. The viewing angle is also very small. These are too significant disadvantages. The bottom line is that the broadcast image will be of high quality as long as you sit clearly in front of the screen, a slight tilt will cause black spots to appear, the picture will be distorted.

It is impossible to solve the problems associated with insufficient black depth, which is why LCD monitors lost the competition to LED displays.

In most cases, tuners are connected to the TV via the VGA connector. However, if the required interface is not available, you can always use an adapter adapter.

Monitor as TV

It may seem to many that it is impossible to turn a monitor into a TV, but it is not. It will take some free time to implement this plan. Let’s start with choosing a monitor. which one is most suitable for such functions?

Experts conducted extensive testing, checking the performance of a huge number of different monitors, we invite you to familiarize yourself with the research results in order to make an objective decision. The leading position is held by the popular South Korean manufacturer Samsung. Converting such a display into a TV is quite simple.

Second place was shared by Sony and LG, offering consumers updated screens with an exclusive design. You can use a computer monitor as a TV, regardless of the manufacturer.

When using a monitor as a TV, you need to consider such a parameter as screen resolution. Naturally, if it is high, then the image quality will be appropriate.

Perhaps the main difficulty for a beginner will still be the lack of special skills. For example, not everyone can solder a module or connect a component. To avoid mistakes, follow the instructions or seek professional help. The system unit is not needed, the main thing is that there is a screen and a power supply for it.

An external TV tuner for your monitor is the easiest way

The DVB-T2 tuner is designed to receive various digital channels. To set up television broadcasting, the most ordinary antenna will be enough, some make it from the remains of a coaxial cable.

How to make a TV out of a monitor without a computer? First you need to connect the tuner and the screen using an HDMI cable, most likely you will need a VGA adapter for this. There shouldn’t be any problems with buying a converter. It remains to connect the antenna and speakers.

Using special converters, you can connect to the monitor and other equipment, for example, a game console, various players and even a laptop.

Naturally, absolutely everyone is interested in the financial side of our experiment. The tuner costs from 1000 rubles or more, as for the adapter. its Speakers can be taken from an old computer or a music center.

Today, you can also purchase a Smart TV set-top box that will allow you to connect to the Internet and play media content online. As for the price, they cost an order of magnitude more. from 2500 rubles and more. However, the functionality will also expand significantly. Therefore, the purchase will fully justify the money invested.

How to use your TV as a computer monitor

So, a truly smart TV today can largely replace a conventional device with advanced multimedia capabilities, namely a computer, laptop or smartphone. In general, the main areas of efficiency remain predominant in the viewing area: films, TV series, programs and music videos remain a priority for software and software produced for smart TVs.

Internet access, wireless data transmission, network resources and video hosting, programs for watching movies, cartoons and TV series. all this is available on the basis of smart TVs. For this reason, many people today use Smart TVs as home devices. After all, in fact, technologies have reached the point that you can use them to sit on social networks.!

How to connect a computer to a TV or laptop via WI-FI?

This method is the most popular among the people. However, its application will require more than just the presence of WI-FI in the house or apartment. Connecting a TV is easy, you just need to read the procedure in the instructions for a specific TV model.

In most cases, you will need to go to the settings (strictly through the TV menu), select the item regarding wireless networks, then select the tab with WI-FI.

In the window that appears, click on “Search” or “Find a network” (or something similar), find your network distributed by the router, enter the password and wait for the inscription “Connected”.

Next, you need to check the network parameters of the computer, if the WI-FI network is the same on both the computer and the laptop, then you can start displaying the picture on the TV.

The first thing to do is to get permission on the laptop to access files from another device. So, folders with video, music and presentations most often do not require permission. However, access to all folders located in the file system of the computer will be somewhat more difficult to obtain.

Initially, you can set the “Home” item on the network (it is done in the same way in the network settings), and also add the TV selected for use as a monitor.

If you need to get access to all the files on the computer, then the steps are as follows:

  • We display the folder on the display, thereby selecting it.
  • Right-click, select the section in the “Properties” pop-up menu.
  • Go to “Access”. this tab can be seen at the top of the folder properties window.
  • Select “Sharing” and click “Install”.

That’s all. The method works, but many users complain that it is quite long. Indeed, until you select the folders you need, a lot of time can pass.!

Therefore, we have prepared for you several more ways to ensure data transfer from a personal computer to a TV with the ability to display it. Here’s the next one:

  • Through the Windows search, we find and open a universal tool called “Explorer”.
  • We select the item “Network”.
  • The sub-item “Network discovery and file sharing” will need to be deactivated. in different versions of operating systems this is done differently, but there should not be any special difficulties.

If everything is ready, then the next thing is small. connect the TV and use it. If not, we analyze more detailed instructions.

  • Turn on DNLA. This function allows you to organize a wireless connection of your TV to third-party devices.
  • We open that section of the TV menu, which is responsible for broadcasting files from the system.
  • Select the desired section (“Movies”, “Music”, etc.) and select the appropriate file directory.

The photo shows an example of a connection via a Philips TV, SimplyShare function

Sony TVs simply use the Home button. If you have an LG TV, look for the SmartShare section. there is the desired directory with folders. Most often, users choose media files for viewing on TV. Usually, there are no problems with music, but the video may well not open. How to remove the problem and calmly watch the movie when required? Tries to change the file type from.mkv to.avi. in most cases this is enough to start playback.

What are the advantages?

Using a TV as a monitor is quite convenient for users. most of them really completely switch to broadcasting information from a computer not through a monitor, but using a regular TV. This method of image transmission has several advantages:

  • Screen Width. Most computers are larger and wider than monitors, allowing for a “full-wall” picture;
  • Ease of use. it is much more convenient to sit on the couch and work, looking at the wide screen of the TV, than to hunch over in front of the monitor at the desk;
  • Less harm to health. Again, eye strain is significantly affected by display size and pixel count
  • Excellent detail. you can see all the small details without squinting.

Some may have their own advantages of using a home TV as a monitor. Let’s finally take a look at how to properly connect your TV to your PC broadcast. If the TV does not have the WI-FI Direct function, then the user needs to fulfill one important condition: his TV must be connected to the network distributed by the same router that distributes “Wi-Fi” for the broadcast source computer.

How to Cast Computer Screen to TV Display?

This function is necessary if we need not to open certain files, but to transfer or broadcast everything that is happening on our computer. This is useful if you want to play a computer game, but you want to see the picture on the TV, using it as a monitor.

So, in order to provide real-time broadcasting, there are two types of software: Miracast and Wi-Di. Both technologies work interchangeably, and therefore we will not consider each of them separately, but using Miracast as an example, we will show the connection algorithm. After all, it is common to both technologies.

Miracast and Wi-Di

Wi-Di is a technology developed by Intel. Therefore, it imposes certain requirements on the computer from which the broadcast is planned. So, the computer must have at least a third generation Intel processor, as well as a video card (or graphics adapter) Intel Graphics. Windows 10 may experience playback problems. to fix them, download the drivers provided by Intel on its official website.

The procedure for connecting and using Miracast is not complicated, and therefore even a novice user can handle it. So, here is the algorithm of actions:

  • In the TV settings, we are looking for Miracast or Wi-Di items. We check their activity, they should be enabled by default. If they are missing, it means that the TV is not designed for wireless connection.
  • We find a function called “Broadcast” or something similar. For example, on Samsung TVs it is called “Screen Mirroring”.
  • Go to the “Network” section and activate the broadcast function.
  • In the section called “Devices” we find the item “Projector”, we also activate it.
  • Click “yes” in the pop-up window “Add wireless connection.

TV as a monitor via WI-FI

Today you will not surprise anyone with the so-called “smart” TVs. technologies are marching forward, some devices have sunk into oblivion, and some have been modernized. So in the field of home television: from black and white boxes, we came to technologies with a Smart set-top box, which make it possible to use plasma TVs not only as classic cable players, but also as multifunctional devices.

In this article, we will look at how to broadcast an image from a computer or laptop to a TV. We will review all the methods and methods, and also highlight the WI-FI broadcast method separately. After all, most modern TVs can easily be used as monitors.!

These are the simple procedures we need to complete to connect a TV as a monitor. Before proceeding, check the relevance of the drivers for the WI-FI router.

BYRGPUB.COM 2023