How to open a gazelle door?

Often, you need to open the gazelle as quickly as possible, as a rule, in such cases there is no time and tools to carry out the above operations. For this reason, the only way out is to contact qualified specialists.

To do this, you need to find an emergency car door opening company on the Internet. The advantage of this service is that you will not have to wait long and the specialists will do their job one hundred percent with high quality.

All you need is to call the indicated number and leave a request to the dispatcher, after that you just have to wait for the arrival of the brigade with a set of tools and locks. Upon arrival, the craftsmen will carry out the entire list of works on opening the lock, if necessary, a new locking mechanism will be installed on the spot.

The main advantage of contacting specialists is that they know how to open the door on a Gazelle with minimal or no losses. The process of opening a car is as accurate as possible and the owner does not have to be a window. At the same time, the autopsy process takes about ten to fifteen minutes.

Before choosing the most suitable method, soberly assess your position, consider whether you can open it yourself, are there any tools and how quickly you need to get into the car.

Very often it happens that the driver loses the car keys or accidentally slams the car door. This applies to absolutely all car brands. In such situations, do not despair. You can open the Gazelle yourself. To do this, you need to know a few secrets of the procedure, as well as several tools (a thin screwdriver and a thin wire that bends very easily).

Initially, it is necessary to slightly lower the door glass with your hands. This does not require much force, otherwise the glass may deteriorate. When a small hole appears between the door and the glass, you need to insert a screwdriver there, with which the gap expands slightly. A loop must be made at the end of the wire, the diameter of which should slightly exceed the diameter of the locking button. This action is performed so that the loop can easily be put on the blocker. The length of the wire should be approximately the same as the distance from the window to the locking button (for convenience, the wire is chosen a little longer).

Next, you need to push the wire with a loop at the end into the gap in the window. It is necessary to try to put a loop on the bollard. This action may not be successful the first time. Then the fitter needs to be patient and keep trying to put the loop on the blocker until it works out. After the bollard is caught in the loop, the wire must be pulled up. It should tighten tightly around the button, which must be slowly pulled up. When the button is released from the socket, the door can be easily opened from the outside.

If the glass cannot be lowered, do not break it. Just try to push the window inside. To do this, you need to use two thin screwdrivers to bend the seal. After this action is completed, you need to slightly press on the window with your fingers. If this action fails, then it is necessary to break the glass with a hammer. But this will require glass replacement.

Interesting close: Lexus rx 350 maintenance.

If you do not have special skills, then it is best not to take on opening the door. Otherwise it could damage the vehicle. In this case, it would be best to seek professional help. These people will be able to open your car quickly and without consequences. In order to avoid such unpleasant situations, you need to be careful enough. And the best thing is to have spare car keys in your at all times.

How to open a gazelle without a key?

You can open the Gazelle using the following methods:

To use this method, you need a wedge (wooden) no more than twenty-five centimeters long and up to four centimeters thick, as well as a metal rod with a hook at the end.

Using a wedge, you need to bend the edge of the door in the upper corner, for this purpose it must be carefully driven in between the frame and the rack. If you do not act carefully, you will most likely ruin the door seal and remove some of the paint with a wedge.

In the gap that arose after driving in the wedge, you need to insert a rod and turn the blocker using a hook. If you do not have a wedge, you can try to do without it, for this you need to press on the glass with your hands and try to lower it.

If you succeed, you will need to insert a screwdriver into the slot and expand it. Work very carefully as it can ruin the window. Then everything is repeated, as in the above example.

This method is good because it allows you to quickly get into the car, but it is far from always profitable, since after that you will have to change the lock. The essence of the method consists in drilling the core of the lock with an electric drill, which makes it easy to open the door.

READ  How to connect an IP camera to a polyvision video recorder

You need to take a piece of flexible but stiff wire eighty centimeters long and form a hook at one end. The length of the hook after bending should be about ten centimeters.

When the hook is ready, you need to bend the seal from the side of the door handle and push the wire through. Next, you need to hook the door pull, on which the lock button is located. Once you hook the rod, you can pull the hook up and open the door.

Important: Turning to a specialized company for emergency opening of locks, you get accurate and professional work and do not risk damage to the lock mechanism and the integrity of the upholstery, pull and hooks.

Instructions

To begin with, try to slightly lower the glass with your hands. If you succeed, then insert a thin screwdriver into the resulting crack in order to slightly widen the slot. Do this very carefully, as without calculating the forces, you can ruin the car window.

Measure a piece of the required length from the common coil of wire (so that the end of the wire reaches the locking button) and cut it off. At the end, make a loop with a diameter slightly larger than the diameter of the button. This is necessary so that the wire can easily be put on the blocker.

Next, push the wire with a loop at the end into the resulting gap between the glass and the door and put it on the blocking button. It is possible that the first time you will not be able to do this, so be patient and try to “catch” the button again and again until you reach the result.

Grasping the blocker with the loop, pull it up so that the wire can tighten around the button, thereby pulling it upward. As soon as the button is released from the slot to a sufficient level, your door will immediately open.

In the event that the glass does not go down, try pushing the window inward, carefully bending the seal with two thin screwdrivers. Broken glass can serve as an extreme measure, which will be the easiest for you to replace.

Be careful when opening a closed car, because if you do not have the skills, you can inadvertently damage the elements of the car. If you are not sure of your abilities, then it is better to contact a specialist who can open the car door correctly.

Never leave your keys in the car. If possible, get a duplicate of the keys and keep them at home, as they will not be useful in a closed car. Carry spare keys in your on long journeys.

The cargo Gazelle has two doors located on the right and left side of the cab. The all-metal van and passenger Gazelle are additionally equipped with a side sliding door and a rear double swing door.

Gazelle how to open the rear door lock

There are often times when the driver loses the car keys or slams the door, leaving them inside. But this situation is completely solvable. Opening a car without a key, namely a Gazelle, is not so difficult as it might seem at first glance.

Opening the door to the Gazelle

To open the cab door from the outside, pull the handle towards you. The doors are equipped with locks. The left (driver’s) door is locked from the outside with a key. To do this, insert the key into the lock switch and turn. The doors are locked and locked from the inside. To do this, press the button located near the rear lower corner of the side window. Pull this button up to unlock and open. In order to open the cab doors from the inside, pull the handle located on the inner panel of the door. Make sure the lock button is up in advance.

The all-metal body has two more doors: a side door on the right side and a rear double door. To open the sliding side door from the outside, pull the handle at the rear of the door towards you. Immediately thereafter, use the front handle to slide the door against the direction of travel. To open this door from the inside, stand sideways to it (this is more convenient) and pull the handle located at the front of the door towards you. Push the back of the door out with your palm and immediately then use the handle on the front of the door to slide it effortlessly. Use the same handle to close the door from the inside.

Another way to open the sliding door from the inside is to put your foot on the footrest and rest your knee on the door. Pull the handle on the front of the door towards you, pushing the door slightly outward. The door opens instantly. When exiting the passenger compartment, pay attention to the top so as not to hit your head on the upper door mount.

The side sliding door can be electrically operated. To open or close such a door, you must press a button on the driver’s instrument panel, on the remote control or a button in the passenger compartment. In an emergency, the door can be opened manually.

The rear double door opens outward. The doors open 180 degrees with locking when opening 90 degrees. Use the locks in the same way as the cab door locks. To open the left rear sash, turn down the handle located at the end of the door. Then pull the door towards you. Then open the right wing. To close the door leaves, first close the right door, then slam the left. In this case, the door lock should click.

READ  How to watch video from a security camera

Useful tips for opening Gazelle doors:

  • It is strictly forbidden to drive the car with the doors open or not tightly closed.
  • When driving with a loosely closed door, a characteristic knock is heard.

connect, rear, view, camera, gazelle

Suzuki Grand Vitara review, video test and interior photos How to connect a rear view camera to a radio tape recorder How to check for airbags

Almost every driver was faced with the loss of keys or forgot them inside the car, but slammed the door before he remembered it. at the same time it slammed shut. Answering the question of how to open the gazelle next quickly, many recommend breaking the side glass or knocking out the lock, but the situation can be successfully resolved without such barbaric methods that will cost the owner a rather large sum.

Consider below the ways how you can open a Gazelle on your own or with the help of specialists, without damaging your own property.

You will need

Removing the right rear door lock

Use a screwdriver to pry off and open the door handle plugs.

With a socket wrench or a “10” head, unscrew the two bolts of the handle and remove it.

How to install Jeep Wrangler Backup Camera 2011-2018 model years (automatic and manual transmission)

With the same key, unscrew the bolt securing the clamp of the limiter and remove it.

With the same key, unscrew the two bolts securing the limiter bracket and remove it together with the limiter.

Use a screwdriver to unscrew the screw that secures the socket of the inner handle.

Prying off with a screwdriver, remove the eight plastic clips of the door trim.

Use a screwdriver to snap off the lock switch pull from the switch leash.

Using pliers with thin jaws, take out the cotter pin of the leash and remove the leash from the switch (the leash can be removed from the switch and together with the rod)

Using the “8” key, unscrew the bolt fastening the lock switch by 2-3 turns

I had the same trouble with the right back that year, this year with the left back. That year it started in the fall, but there was still a plus. I waited until spring, plus I did, but it didn’t go away. I thought about disassembling the door from the passenger compartment, and then drove the glass back and forth, and the button suddenly began to pull out and the lock worked normally. I nevertheless opened the door, but I still didn’t understand what the trick was (I greased it there and put it back together). And this year, when I don’t let the cabin cool down all day, it opens in the evening (it’s frozen in sight). Although, again, before the cold weather began.

The trim from the bottom is attached to the caps, so you can simply pick it up and must be removed (do not forget to turn it from under the handle and armrest).

A loop

To get into the Gazelle Next when the sliding door is jammed, wire is used. Its length should be sufficient to reach the locking button. A loop is required at the end of the metal cord. In size, it should be slightly larger than the opening button. Having slightly lowered the glass, the wire is lowered into the target and put on the blocker button.

What to do if the side door on the Gazelle does not open

Opening methods

If Gazelle Next does not open, the side sliding door is jammed, then professional and handicraft methods of repairing the canvas are used. When the lock has been blocked, and it is not possible to get inside, you can choose any of the following options to correct the situation. To work, you will need some tools that are in the car of each driver.

Opening the door itself from the outside without a key, without damaging the structure, will not work. First you need to get to the salon.

Opening methods

If Gazelle Next does not open, the side sliding door is jammed, then professional and handicraft methods of repairing the canvas are used. When the lock has been blocked, and it is not possible to get inside, you can choose any of the following options to correct the situation. To work, you will need some tools that are in the car of each driver.

Opening the door itself from the outside without a key, without damaging the structure, will not work. First you need to get to the salon.

Instructions

To begin with, try to slightly lower the glass with your hands. If you succeed, then insert a thin screwdriver into the resulting crack in order to slightly widen the slot. Do this very carefully, as without calculating the forces, you can ruin the car window.

Measure a piece of the required length from the common coil of wire (so that the end of the wire reaches the locking button) and cut it off. At the end, make a loop with a diameter slightly larger than the diameter of the button. This is necessary so that the wire can easily be put on the blocker.

READ  Setting up an IP camera for viewing over the Internet

Next, push the wire with a loop at the end into the resulting gap between the glass and the door and put it on the blocking button. It is possible that the first time you will not be able to do it, so be patient and try to “catch” the button again and again until you reach the result.

Grabbing the blocker with the loop, pull it up so that the wire can tighten around the button, thereby pulling it upward. As soon as the button is released from the slot to a sufficient level, your door will immediately open.

In the event that the glass does not go down, try pushing the window inward, carefully bending the seal with two thin screwdrivers. Broken glass can serve as an extreme measure, which will be the easiest for you to replace.

Be careful when opening a closed car, because if you do not have the skills, you can inadvertently damage the elements of the car. If you are not sure of your abilities, then it is better to contact a specialist who can open the car door correctly.

Never leave your keys in the car. If possible, get a duplicate of the keys and keep them at home, as they will not be useful in a closed car. Carry spare keys in your on long journeys.

The cargo Gazelle has two doors located on the right and left side of the cab. The all-metal van and passenger Gazelle are additionally equipped with a side sliding door and a rear double swing door.

Screwdriver and gasket

If the side door on the new Gazelle is jammed in winter, then you can still try to open the canvas without a key, for this you need:

  • Using a flat screwdriver, pry off the glass seal.
  • Manually lower the element.
  • Get into the car through the passenger door next to the driver.

Using a screwdriver, you can unscrew the side door bumper, the round fasteners on the Gazelle are hidden under plastic plugs.

how to install a BACKUP CAMERA DIY

If you have a sturdy wooden stick or an iron rod with a hook at the end at hand, you can try using them to unlock the mechanism. A wedge is required to rest between the frame and the rack. It is important to be careful not to damage the paintwork. When a gap appears between the glass and the seal, you can lower the window or press the lock.

Manual method

The door is powered by an electric drive, therefore, before starting, press the button on the side panel “emergency opening”. To unlock the Gazelle Farmer, if the door does not open from the outside, from the inside you need:

  • Put your foot on the footrest.
  • Rest your knee on the door.
  • Pull the handle towards you and push. The door leaf should slide outward.

You can always call for help from specialists or use barbaric methods. You can drill the lock cylinder with an electric drill, knock out the locking mechanism with a hammer or call the emergency service.

Main reasons

Gazelle is a vehicle that is mainly purchased for business. In Russia, it is used as a route taxi for personal purposes or for transporting a large number of people in the form of a private taxi. To open the structure without damaging the leaf, when the Gazelle side door guide is jammed, you need to choose the appropriate procedure. It is calculated depending on the situation and the nature of the fault. Causes:

  • Breakage of fittings. The door might jam. Sometimes the dog flies, which creates a smooth movement of the carriage.
  • The middle or rear pin, which is responsible for fixing the blade during opening, sinks.
  • One of the electrons in the passenger door has burned out. It may close due to frequent vehicle washing or climatic conditions.
  • Careless handling of the structure. Passengers often bang the door forcefully when leaving the vehicle.
  • Lack of care for the sliding blade. The door may jam. Diagnostics, prevention, lubrication and adjustment work should be carried out regularly.

It is more difficult to find a breakdown when there are no apparent reasons, but the prerequisites are always present. If the door does not close well or cannot open the first time, there are extraneous noises, squeaks, then a comprehensive diagnosis should be carried out.

It is recommended to pay attention to the position of the door: the presence of deformation, the size of the gap between the leaf and the body, overhang or skew. Deformation can occur if the Gazelle was involved in an accident. In this case, first, the structure is straightened, then the mechanisms are repaired.

gazelle next radio tape recorder instruction:

  • Search

    radio intro instruction

    radio tape recorder zhvs instruction

    Similar files

    gel tdm instruction

    gag forte canina instruction