How to distribute the Internet from Android phone to a computer with windows10?
Hello, friends! Often there is a situation when the Internet is disconnected (or have not yet been conducted). And he is very much needed right now. Smartphone Android will help to get out of the situation.
At most tariffs of mobile operators, the Internet package is already included in the price. So there should not be any problems with access. Another thing is distribution.
Even if you have a SIM card with unlimited Internet, as soon as you start distributing it, it will be possible to use it for free until a certain limit is exhausted. Find out your operator! But to view your favorite sites and social networks should be enough.
We connect the Internet to a computer via a modem with a SIM card
If there is no cable Internet, but it catches poorly on a mobile phone, you can use 3G/4G modem to communicate. What are their pluses? There are universal modems that are suitable for any mobile operator and you can insert any SIM there. With good coating, the quality and speed of the Internet is decent.
Take a modem for the perspective of 4G/LTE, Hi-Link categories. This means that you do not need to put a special program on the computer. it is already inside the modem. It is updated by itself, which means that its firmware will be in the current state.
When using the modem, the computer may not start an automatic start (I have this function disconnected by antivirus). Through the conductor, we manually start a launch file on behalf of the administrator:
After the first launch, labels on the desktop may appear. This is fine. Then we must update the firmware:
With a successful connection, the modem diode should burn continuously in blue or red (depending on which network he caught). If the diode blinks, it means problem.
In addition, you can connect antennas, 3G signal amplifiers to the modem, active purchased antennas. For example, I had a house in the village in the lowland and the Internet successfully flew by somewhere high. In such situations, the signal amplifier does not help, since there is nothing to strengthen, and did not buy it.
I had a mast with a television antenna on the house. I decided to make the antenna Kharchenko, information on the Internet is full. Installed, experimentally oriented on the tower, achieved the best quality of the signal. The Internet has appeared. Not a city of course, but to be in touch, there was enough.
We connect the Internet to the laptop via USB cable
Previous methods are good, but if you are on the road wireless bins, this is an additional energy consumption. The battery of the laptop and smartphone is discharged. The most economical way to use a smartphone as a modem
The more modern the smartphone model, the easier everything will pass. If everything is fine, then the computer will immediately respond without any additional settings:
All you need is a working hard, well.sitting cable in the USB nest. The option is good because the charging of the smartphone is on, less energy is consumed. I have a pretty good connection speed through the cable:
Distribution of mobile Internet on a laptop over a Wi-Fi network
Wi-Fi connection is the easiest and most convenient way to organize an access point.
- Go into the smartphone settings.
- Open the menu of wireless networks (the section can be called differently, depending on the model of the mobile device).
- Go to the “Modem mode” section.
- Turn on the “Wi-Fi access point”.
- If necessary, set the password and other network parameters (for example, “hidden”).
- Update the list of Wi-Fi connections on the computer and connect to the created access point.
- Open a browser and go to any site to check the presence and speed of the signal.
Additional Information. The stability of the Internet connection, as well as the speed at which the data is transmitted, depend on the conditions of the mobile operator, as well as the quality of signal reception on the smartphone.
Connection configuration via Bluetooth
Communication can be created with equipment, equipped with this module: laptops, tablets, smartphones. The technique is used as a Bluetooth riot, to obtain a stable connection, customer equipment should be located closer than 8 meters. All devices should be activated by the adapter of the same name.
To create a ligament, a standard algorithm is used:
- On the cellular, the Internet 3G/4G is turned on.
- From the main menu you need to go to “Wireless Networks”, there to also move the slider from Bluetooth to an active position.
- In the same subsection, the “Available Devices” block is selected and it notes the device that needs to be given the right to visit the Internet. If there are several gadgets, then the ligament is formed alternately.
- After performing the operation on the display, a window will occur with a request for a mission. After reconciliation of the code, you must click on the label “connect” on both devices.
- In additional BS settings, the “modem regime” subsection opens and the Bluetooth model is activated.
Configuring WiFi Router or Wireless Access point (In Amharic)
Important! After the process is completed, the results of the changes are preserved, and computer equipment receives the right to enter the World Wide Web. In parallel, the smartphone can be used as a router for a computer via USB, to correctly configure it to perform the process.
The list of disadvantages of such a connection is presented:
- the ability to connect only one additional device;
- a slower Internet speed;
- easy accession of attackers to the line;
- interception or plug of Bluetooth signal;
- the absence of the necessary fee on a stationary computer, which will entail additional expenses for the purchase of a separate external router.
Important! Before binding Bluetooth, you need to make sure that the adapter is included on each of the devices.
How to connect to the Internet from a mobile phone
Our experienced team of editors and researchers who checked it for accuracy and completeness participated in the creation of this article.
Wikihow content managers team carefully monitors the work of editors to guarantee compliance with each article with our high quality standards.
The number of views of this article: 170 206.
This article tells how to connect a computer to the Internet via iPhone or Android Smartphone. This is done by creating a wireless access point or through a USB modem. Keep in mind that not every mobile operator supports the creation of an access point. If the mobile operator allows the creation of an access point, remember that the computer will spend a mobile Internet traffic.
Open the “Settings” application on the iPhone. The icon of this application has the appearance of the gear and is most likely on the main screen.
Press the access point. This option is located in the upper part of the “Settings” page under the “Cellular Communication” option (or “Mobile Internet”).
How to Set Up a Wireless Access Point | Internet Setup
Enter the password to the access point. The password will be displayed next to the “Password to the Wireless Network” heading in the middle of the page with a list of hot spots on the iPhone.
Press further (Windows) or connect (Mac OS X). If you entered the right password, the computer will connect to the Internet through an access point created on a smartphone.
Connecting devices to a wireless network
After all the settings were successfully made, the Wi-Fi access point on the phone is turned on, and it was possible to connect the router to it, you can easily connect to the Internet. The router in this case acts as an amplifier of Wi-Fi, which is distributed from the phone.
The phone with the right settings plays the role of the modem perfectly. A router is necessary to strengthen the Internet connection
In general, the process of using a mobile phone for distributing the Internet is as simple as possible and does not require certain knowledge. However, before you attach the phone, it is important to carefully study the voiced instructions to exclude the likelihood of errors.
Distribute the Internet using a smartphone in three different ways. The safest is using a USB cable, but in this way you can connect only one device. Wi-Fi access point is the most flexible method. The Internet through Wi-Fi works quickly, several devices can be connected to the distributing smartphone, up to 10 devices. The method with Bluetooth is not very convenient, but in some situations it turns out to be useful.
- https: // biz-ikun.RU/kak-Podklyuchit-Noutbuk-K-internetu-Cherez-Smartfon.HTML
- https: // wirelesscover.ru/Wi-Fi/Connection-From-Smartfone
- https: // wifigid.ru/virtualnaya-wi-fi-set/kak-podklyuchit-internet-chasez-tefon-k-kompjuteru
- https: // zvondozvon.ru/tehnologii/Internet/Podklyuchit-Internet-K-Noutbuku
- https: // www.Internet-Technologies.ru/articles/Newbie/Internet-Na-Noutbuke-Cherez-Smartfon.HTML
- https: // Cutycompp.ru/podklyuchaem-noutbuk-k-internetu-Cheres-tefon/
- https: // www.Fly-Phone.ru/notes/stp2/podklyuchit-internet-k-pk/
- https: // kakoperator.RU/Lifehacks/Kak-Podklyuchit-Internet-S-Tefona-Na-Noutbuk
- https: // fast-wolker.ru/kak-podklyuchit-internet-k-kompyuteru.HTML
- https: // fast-wolker.ru/kak-podklyuchit-internet-k-noutbuku.HTML
- https: // wifigid.RU/Raznye-Nastrojki-Tefonov/Kak-Podklyuchit-Tefon-K-Kompyuteru-Cherez-Wi-Fi
- https: // wifigid.ru/raznye-nastrojki-tefonov/kak-razdat-internet-s-telefona
How to connect a phone to a computer via Wi-Fi: how to distribute the Internet from phone to PC
How to connect a smartphone to a computer via Bluetooth. step.by.step instructions