How to put a password on Wi-Fi on a d-link router

Wi-Fi wireless network is a great way to organize a home network. You can connect not only mobile devices, but also desktop computers to it. Thus, you can significantly reduce the number of wires in the house. However, the Wi-Fi network has one drawback. It is available for everyone who is in the access point of the access point. In order to minimize the risks associated with this, it is necessary to put the password on Wi-Fi. In this material, we will talk about how to put a password on Wi-Fi on a D-Link router.

We go to the web-intake.

Management of any router is performed through the so-called web-integse. Web-Inteateis is a small site that is posted on the router itself. Using this site, the router is controlled and all the settings are changed. Therefore, if you want to put a password on Wi-Fi on a D-Link router, then you first need to enter the web-intese.

In order to enter the web-integer, open any browser and enter the address of your router into the address line IP. If you do not know what IP address your router is available at, then try 192 first.168.0.1, and then, 192.168.one.one. In most cases, one of these IP addresses is used.

After you enter the IP address of the router into the address line, you will have an authorization form for entering the router web. Here you need to enter a login and password from a router. Without this data, enter the web-integer and put the password on Wi-Fi will not work.

At this stage, it very often turns out that the user has forgotten or does not know the login/password from the router. If you also get into a similar situation, then the following tips should help you:

• If you have not changed the login and password from the router, then you should try to enter a standard login and password. In most cases, D-Link routers use the following login/password pairs: Admin/Admin, Admin/Password or User/User. Try them all, Oodin after another.
• If your router is set up by another person, then contact him and demand a password.
• In extreme cases, you can reset the router settings. After resetting the settings, you can enter the web-integer using a standard login and password. But, it must be borne in mind that after resetting the settings, the router will have to adjust again.

We go to the Wi-Fi settings section.

So, after you introduced the right login and password, you should open a router of the router in front of you. Then you need to go to the section with Wi-Fi settings. On D-Link routers, this section is called “Setup-Wireless Settings”. In some cases, in order to access the settings, you will need to additionally click on the “Manual Wireless Network Setup” button (see. screenshot).

We change the parameter “Security Mode”.

After that, you will open a page for manual Wi-Fi network settings. If a Wi-Fi password is not installed on your router, then you need to start with the fact that you change the “Security Mode” parameter with “None” to “WPA-PERSONAL”. This parameter sets the Wi-Fi network protection method. None mode means that the protection is disabled and the password is not used. While “WPA-Personal” provides optimal protection and allows you to set the password on Wi-Fi.

We set the password.

After changing the “Security Mode” parameter, we can put the password on Wi-Fi on our router from D-Link. To do this, enter a new password in the text field “Pre-SHARED KEY”.

After you introduced a new password for Wi-Fi, it remains only to save changes. To do this, click on the “Save Settings” button. Usually, in the web-integrator of the D-Link routers, this button is located at the top of the page.

Everything, you put the password on the Wi-Fi router D-Link. After rebooting the router, the changes are stipulated by force and in order to connect to Wi-Fi will have to enter a new password.

Web-Inteateis

Separately, we note the procedure for entering the web-intake, since it is through this menu that all other actions will be carried out. For authorization in this software, you need to open any browser and register there address 192.168.one.1 or 192.168.0.one. Activate the transition by pressing the Enter key.

Now on the screen will be displayed for entering. Enter the login and password there. If you have not previously changed the access key, then it, like the user name, will correspond to Admin. It is this word that it is necessary to introduce in both fields.

We would not put this procedure into a separate section of today’s material, if absolutely all users did equally easily coped with it. However, some have problems associated with authorization. You can solve them in different ways, and read more about all this in a separate article on our website on the following link.

D-Link

One of the most popular brands of routers in our country. There are a fairly large number of models, but firmware that differs from each other (in the root)-not so many, 3-4 pcs. In this article I will give several of their variations, and first several important parameters.

IP address (default) for entering the settings: http: // 192.168.0.one

(preferably using the Internet Explorer browser)

Login (by default): admin

Password (by default): either an empty line, or also admin.

In old models of routers (such as DIR-300, DIR-320, DIR-615, DIR-651). As a rule, the firmware has not been translated into Russian and presented in such an orange-gray design. To change the password, you must go into the router settings (if you do not come in, then see. This). And open the section “Setup/Wireless Setup”.

At the bottom of the window in the column Network Key, enter your password (see. Screenshot below), by the same, the same security certificate and the type of encryption are set there. After entered settings, save them. Save Settings button.

DIR-300. Password installation / setup / wireless setup

By the way, there is a similar firmware in Russian translation, tunes in the same way.

For models of DIR-300 NRU and DIR-320 NRU (firmware version 1.2) The settings page look a little different: a pleasant white background, on the left side all the main sections of the settings are presented. Open “Wi-Fi/safety settings”. and install:

Do not forget to save the settings by clicking on the “Change” button.

D-Link Dir-620/DIR-320 NRU in version 1 firmware has.3 and 1.4 The Inte Wee is somewhat different: when you go to the main screen, you see a gray background and tiles (as in Windows 8) on which the main sections of the settings are displayed.

To change the password, it is necessary to open the section “Wi-Fi/Safety Settings” (number 1 on the screenshot below), and then enter:

Rostelecom router (Sagemcom)

In general, with routers from Rostelecom, as a rule, there are no big problems. everything works as it should be. And when connecting the Internet, you will be put a password and everything will be tuned. The firmware in the routers is completely in Russian, so there are usually no questions about it about it.

Settings entry parameters

Address: http: // 192.168.one.one/

Password and Login (by default): admin

The browser is suitable for almost any: Opera, Firefox, IE, Chrome, etc.

To set the password, open the “Settings of Wlan/Security” section. Next, in the subsection “Manual Setting of the Access point”, select:

• Authentication. WPA2-PSK;
• WPA/Wapi password. indicate your password;
• WPA/Wapi encryption. AES;
• Next, click the “Apply/Save” button (screenshot is given below).

Sagemcom Fast 2804. Roter from Rostelecom

TP-Link

One of the largest manufacturers of routers, tens of millions of people around the world use their products. In our country, their routers are also very popular, and do very well with Russian “realities” (they work with almost all Internet providers).

Parameters for entering

IP address: 192.168.one.1 (in rare cases 192.168.0.one. depending on the firmware version);

User name: admin;

Password: admin (type without points, commas, etc.).

Most often you have to deal with the so.called “green” firmware. It is found in routers: TP-Link TL-WR740XX, TL-WR741XX, TL-WR841XX, TL-WR1043ND (45ND) and others. About 50/50 firmware is in English/Russian.

The English version is presented on the screen: to change the password, you need to open the “Wireless/Wireless Security” section. Then select WPA/WPA2.Personal and put:

To save the entered settings, click the “Save” button in the bottom of the window in the center.

Almost identical actions will need to be done in the Russian version of the “green” firmware: Open the section “Protection of the wireless regime”. Then set the PSK password (see. number 3 on the screen below).

TP-LINK “Green” firmware (Russian version)

You can also often find a “blue” version of the firmware in TP-Link (for example, TP-Link WR340G, TP-Link WR340GV, etc. Similar models).

• First, open the “Wireless Settings” section;
• In the Security Type column, we install WPA-PSK/WPA2-PSK;
• Security Option. We put Automatic;
• Encryption. Install automatic;
• PSK Passphrase. This is the password (somewhat excellent spelling than in other. Firmware versions). It must then be specified when wirelessly connecting to the router.

After the settings made, save them (the Save button on the screen is higher, see. number 3).

Trendnet

The access parameters are relevant provided that the router has factory settings, and its IP did not change.

IP address for entering the settings: http: // 192.168.ten.one

User name (login): admin

Password (password for access): admin

In general, Trendnet routers most often have 2 versions of the firmware: blue and gray (both in Russian and English).

To configure safety and set the password in the “blue” firmware, for example, the Trendnet TeW-432 BRP router, you need to do the following:

• Open the Wireless/Security section;
• In the Authentication Type field, select WPA;
• In the PSK/EAP field, select PSK;
• In the Cipher Type field, select Auto;
• In the Passphrase and Confirmed Passphrase field, enter the password and click Apply (screen below).

Trendnet TeW-432BRP / Security / Safety Safety Wi-Fi Network

In the “gray” version of the firmware (for example, as in the Trendnet Tew-651br router), actions are performed in the same way, even the menu elements are located in the same places.

Changing the password Wi-Fi

In addition to changing the access code to the parameters, you need to know how to change the Wi-Fi password in the D-Link router. This requires the sequence of actions:

• Go to the main menu. This is done in the same steps that are presented in past points.
• Next, you need to go to the Wi-Fi tab.
• Go to “Safety Settings”.
• A new window will appear in front of the user, in which you should choose the line “PSK encryption key”. In this paragraph, we change the old password to a new meaning. It is recommended to use 8 characters in the code, it is better to take Arabic numbers, as well as the English alphabet.
• Save changes using the “apply” button.
• You can save new information by reloading equipment. To do this, click on the word “system”, which is located under the number of the device in the upper part of the parameter panel.
• The list will open in which it is necessary to click the line “restart”.

You can also restart the router by just by clicking on the shutdown button. The device turns on by pressing the same button.

When the problem with how to change the password was solved, and it was overwritten, the PC system will delete the old Wi-Fi network and offer the search for a new network with connecting to it.

When the connection with the router is restored, it is necessary to dial a new code in the corresponding field.

How to configure the password on the router D Link

It is recommended to set up through a web-intake. In order to get into it, open the browser (Internet Explorer or Mozilla Firefox) and enter in the address line 192.168.0.one

User name. admin

The message “The default password is installed now will appear. For safety reasons, you are recommended to change the password. “”. Click OK, install a new password for access to the Web-Inteatheis and click “Save”.

User name. admin

Password. installed by you

Go to the Wi-Fi = General Settings menu and check to stand the box “Turn on the wireless connection”.

Next, go to the Wi-Fi menu = Basic settings.

Hide the access point. don’t put a checkmark

SSID. Write the name of the wireless network. You can use Latin letters and numbers

Country. leave Russian Federal

Channel. instead of AUTO, install any channel from 1 to 11

Wireless mode. you can leave it unchanged or choose another mode

Maximum number of customers. you can set the maximum number of wireless customers. If 0 is set, the number of customers is unlimited.

After changing the settings, click “Save” in the upper right corner.

Next, go to the Wi-Fi menu = safety settings.

Network authentication-It is recommended to install encryption WPA-PSK/WPA2-PSKMIXED

PSK encryption key. you can use the default key or set your own (from 8 to 63 characters, you can use Latin letters and numbers)

WPA shifting-Select Tkipaes

WPA Key update period. leave unchanged

After changing the settings, click “Save” in the upper right corner.

How to configure the password on the router D Link

It is recommended to set up through a web-intake. In order to get into it, open the browser (Internet Explorer or Mozilla Firefox) and enter in the address line 192.168.0.one

User name. admin

The message “The default password is installed now will appear. For safety reasons, you are recommended to change the password. “”. Click OK, install a new password for access to the Web-Inteatheis and click “Save”.

User name. admin

Password. installed by you

Go to the Wi-Fi = General Settings menu and check to stand the box “Turn on the wireless connection”.

Next, go to the Wi-Fi menu = Basic settings.

Hide the access point. don’t put a checkmark

SSID. Write the name of the wireless network. You can use Latin letters and numbers

Country. leave Russian Federal

Channel. instead of AUTO, install any channel from 1 to 11

Wireless mode. you can leave it unchanged or choose another mode

Maximum number of customers. you can set the maximum number of wireless customers. If 0 is set, the number of customers is unlimited.

After changing the settings, click “Save” in the upper right corner.

Next, go to the Wi-Fi menu = safety settings.

Network authentication-It is recommended to install encryption WPA-PSK/WPA2-PSKMIXED

PSK encryption key. you can use the default key or set your own (from 8 to 63 characters, you can use Latin letters and numbers)

WPA shifting-Select Tkipaes

WPA Key update period. leave unchanged

After changing the settings, click “Save” in the upper right corner.

How to change the password from Wi-Fi in AIR integration

The so-called Air Inteeis can also be found on D-Link routers. For example, such an integration is used on routers D-Link DIR-825, DIR-615, DIR-620, DIR-630 and some others. If you have a D-Link router with an AIR integer, then in order to change the password on Wi-Fi you need to open the section “Wi-Fi-Security Settings-2.4 GHZ “.

In this section, you can choose the operating mode of the Wi-Fi network, as well as indicate the password. Make sure that the Network Authentication indicates WPA2-PSK, and then enter a new password in the Encryption Key PSK field.

After making all the settings, keep the changes by pressing the “Apply” button. If your router supports two ranges, do not forget to repeat these actions for the 5 GHz range.

Wi-Fi password installations

Setting a password on Wi-Fi can take more time and, as a rule, brings more troubles. For example, during the connection, the time for access to the Internet can be interrupted or the connection is broken. Many users often have the following notification: “The network parameters saved on this computer do not meet the requirements of this network.”. What to do in such a situation?

If such problems arise, then the following actions must be performed:

• Find and open the “Networks and total access control center”.
• Next, you need to go to the “Wireless Networks Management” and remove the existing access point.
• There will also be notifications with a request to save all changes. They also need to be confirmed so that the innovated password is preserved.

What to do if the password does not work

We found out earlier how to find out the password for access to Web-Inteateis. It happens that use the code that is written on the case does not work. It is not suitable, and when trying to enter the admin panel, an error is displayed. In this case:

• Make sure the computer is connected to the router. Use the cable if for some reason access through Wi-Fi is limited.
• Check the introduced IP address. Perhaps it is written incorrectly and is not suitable for your router. The right address can be viewed on the sticker or in the documentation for the apparatus.
• Check the entered password. Perhaps you made an error when writing a code combination. Most often, users forget to change the keyboard layout, which is why they write in the wrong language. Also make sure Caps Lock is disabled.
• Reload the router. An error may occur due to failures or hardware malfunctions. Often this happens on old models. Routers, like any network equipment, are sensitive to voltage surges in the mains, and can also overheat due to long-term work.

If the administrator is not possible to restore access to the administrator panel, since the password is not suitable, the easiest way to drop the system to factory settings. To do this, use the “Reset” button located on the device case. After reset, all parameters will return to the meaning of “default”. Therefore, you can enter the administrator panel using the standard log and password indicated on the case.