How to enter BIOS on Asus laptop Windows 10?

In Asus laptops, the Delete, F2, F10, Esc buttons can be responsible for the boot menu and BIOS. That is, to bring up the BIOS or the boot menu, hold down the Delete, F2, F10 or Esc key immediately after pressing the power button of the laptop when the manufacturer’s logo appears.

How to get out of BIOS on an Asus laptop?

If the OS is not already installed, only the first option is suitable for you. In Asus laptops, the Delete, F2, F10, Esc buttons can be responsible for the boot menu and BIOS. That is, to bring up the BIOS or the boot menu, hold down the Delete, F2, F10 or Esc key immediately after pressing the power button of the laptop when the manufacturer’s logo appears.

How to get out of the BIOS on the phone?

  • Press and hold the power button for more than 15 seconds
  • Remove and reinsert the battery
  • Wait for the Android device to discharge itself
  • Connect Android to PC, in ADB RUN program under Manual Command menu. ADB enter the following command adb reboot normal (does not work on all devices)

How to exit BIOS correctly?

  • F2.
  • DEL.
  • F1.
  • F10.
  • ESC.
  • CTRLALTENTER.
  • CTRLALTESC.
  • CTRLALTINS.

How to enable advanced BIOS settings on an Acer laptop?

BIOS 1.37, but it also worked on 1.32, the main thing is not to jump around the windows, but only to go into the BIOS, press FnTab three times, press F10, press Enter, the computer will reboot, immediately press F2 and it will enter the extended BIOS (will be added advanced window with all hidden parameters).

How to enable Launch CSM on Asus?

In Asus laptops, to install Windows 7 instead of the preinstalled Windows 8, you first need to go into the BIOS, disable “Secure boot” in the “Security” section, then enable “Launch CSM” in the “Boot” section. transfer from “Disabled” to “Enabled” (Launch CSM in this case stands for Launch Compatibility Support

How to enter BIOS on Windows 10?

Press the “Y” and “Enter” key. You will exit the BIOS without saving the changes, the computer will continue to boot.

Configuring safety characteristics on Asus laptops

Unlike almost all computers and laptops, modern Asus devices are equipped with a special protection against system overwriting. UEFI. You will have to remove this protection if you would like to install some other operating system, for example, Linux or the oldest versions of Windows.

Fortunately, it is not difficult to remove the protection. you just need to use this step-by-step instruction:

  • Go to “Boot”, which is in the top menu.
  • Further to the section “Secure Boot”. There it is necessary to put “Other OS” in front of the “OS Type” parameter.

On Asus laptops, it is necessary to configure the BIOS in rare cases, for example, before reinstalling the operating system. Other characteristics were set by the manufacturer for you.

Enter BIOS on Asus

Consider the most popular keys and their compositions for entering the BIOS on Asus laptops of various series:

  • X-series. If your laptop’s name starts with #; X #; followed by the rest of the numbers and letters, it means your X-series device. To enter them, either the F2 button or the CtrlF2 composition is used. But on extremely old models of this series, instead of these buttons, F12 can be used;
  • K-series. F8 is traditionally used right there;
  • Other series designated by characters of the British alphabet. Asus also has the least common series, like the previous 2. The names start from A to Z (exceptions: the letters K and X). Most of them use the F2 key or the CtrlF2 / FnF2 combination. On older models, Delete is responsible for entering the BIOS;
  • UL / UX-series also enter BIOS by pressing F2 or through its combination with Ctrl / Fn;
  • FX series. This series presents modern and productive devices, therefore, to enter the BIOS on such models, it is recommended to use Delete or the CtrlDelete combination. But on the oldest devices it may be F2.

Despite the fact that laptops are from 1 manufacturer, the process of entering the BIOS may differ between them depending on the model, series and (possibly) personal characteristics of the device. The most popular buttons for entering BIOS on virtually all devices are: F2, F8, Delete, and the rarest #; F4, F5, F10, F11, F12, Esc. From time to time, you can see their compositions with the introduction of Shift, Ctrl or Fn. The most popular button composition for Asus laptops #; this is CtrlF2. To enter, only one button or a combination of them is suitable, the system will ignore others.

READ  How to connect Bluetooth headphones to Lenovo laptop

You can find out which specific key / combination you need to press by examining the techno documentation for your laptop. This is done both with the help of the documents that come with the purchase and by viewing on the official website. Enter the device model and on its individual page go to the section #; Support #;.

call, bios, asus, laptop

On the tab #; Manuals and Documentation #; you can find the necessary help files.

Also on the PC boot screen from time to time there is the following inscription: #; Please use (required key) to enter setup #; (it may look different, but carry the same meaning). To enter the BIOS, you will need to press the button that is given in the message.

On Asus laptops with Windows 7 and below

Asus laptops with Windows 7 and below do not support Fast Boot. Therefore, the entry into the BIOS is carried out by the usual means. To enter BIOS, follow these steps:

  • Shut down your computer completely
  • Press and hold #; F2 #;.
  • Press the # key; Power #; (don’t let go of #; F2 #;).
  • In the BIOS on the tab #; Boot #; change the boot order of devices (if necessary).
  • Save configurations with #; F10 #;.

Note: For normal initialization of the device in the BIOS, it must be connected to the PC before turning it on. This applies to hard drives and bootable flash drives.

Or use this method to enter BIOS:

  • Turn off the computer again. Hold down #; Power #; within seconds.
  • Press and hold the #; ESC #;.
  • Press the # button; Power #; (don’t let go of #; ESC #;).
  • In the boot menu that opens, select #; Enter Setup #;.
  • Configure BIOS and save configurations with #; F10 #;.

Note: If you only need BIOS access to configure the boot order of attached devices, use the most convenient method:

  • Turn off the computer by long holding the #; Power #;.
  • Insert a bootable USB flash drive or disk into your laptop.
  • Hold and do not release the #; ESC #;.
  • Press the # key once; Power #;.
  • In the Boot menu that opens, select the required device.

Method 1

  • Turn off your laptop first;
  • Then hold down the F2 key;
  • Without releasing the F2 key, turn on the device;
  • Do not release the F2 button until the main BIOS / UEFI page appears.

Method 1 #; hold down F2 and turn on the laptop

Note: instead of #; clamping #; F2 # keys; you can often press it right away after turning on the laptop. The action will be the same, you should also see the main page of BIOS options.

As for the choice of media to boot, you need to open the section #; BOOT #; (loading). Below I will consider 2 more favorite software options.

On the newest Asus laptops, UEFI is used instead of BIOS: at the bottom of the screen there are several links #; click on #; Advanced Mode (F7) #; (you can also press F8 to select the media, the boot menu will open, where you can select all available drives to boot).

Advanced Mode F7 (alternative settings). Clickable. Asus laptop

In subsection #; BOOT #; in the line #; Boot Option #; you can select and specify the media from which you want to boot. After configuring the options, do not forget to save them (F10 key or select # from the menu; Save and Exit #; (i.e. save options and exit)).

In the oldest laptops, you will find the usual BIOS: here you can immediately open the BOOT section and specify in the line #; Boot Option #; required drive (USB flash drive). Saving options also by pressing F

articles on this topic:

Hello! I got to an extremely necessary site, but there is allgaz7.ru, but since it will be possible to use a bootable USB flash drive with Windows 7? I made it, but I keep it for the last time, but at the moment a friend flew Windows and he asks me for it, not will you have to do everything from scratch again, tell me.

Nikolay, hello. You can safely give your friend a flash drive. The boot drive can be used until the flash drive itself fails or information is deleted from it.

I can not switch the boot in BIOS via a USB flash drive. Asus UXL /

I have a simple question. On the Asus laptop, in the BIOS there is no data in any of the sections about which OS is installed and which one you can choose.

Hello, before installing Windows, I threw off the BIOS options to the usual ones, the laptop now does not see the hard drive, tell me what to do.

Artem, hello. Try changing the options in the Boot tab. In this article, the creator mentioned hard drives in the second pt of the section “Setting up on Asus laptops”.

Hello Artyom, I have an Asus XCA laptop, Intel CORE iU, 1.8 GHz, 4 / GB, 15.6 ″ diagonal; resolution WXGA (×) HD, Generic PuP Monitor and Inte (R) HD Graphics. year of release.I’m nothing in it allgaz7.ru please, can it be somehow updated with the help of drivers and make the image quality better?

Hello. Not updating anything on a laptop for 5 years is not a bad decision. To update the BIOS directly, use the following instructions:

And yet, do not rush to do this, but first, just update all the drivers. This can be done according to one of the instructions below. They are for other Asus laptops, but in your case, the procedure and methods will be exactly the same.

Как Установить Windows 10 На Ноутбук ASUS с флешки?

Updating drivers on Asus laptops:

call, bios, asus, laptop

The image quality is unlikely to improve, but overall performance is bound to increase. In fact, for a possible improvement, use the Intel HD Graphics control panel (it is constantly minimized to the system tray), there you can change almost all the characteristics of the picture.

READ  How to turn off call blocking on iPhone

Hello, the Asus RM laptop did not create a sound device, there are no audio options in the BIOS, how to solve the problem?

I have a different BIOS on a PC, I am very familiar with this, do the same article but with the newest generation of Asus!

Hello Anonymous. Please specify the model and revision of your motherboard so that we can accurately find the version of the installed BIOS or UEFI. In addition to this, tell me what options you are interested in and we will personally write out all the necessary information on this matter for you.

Hello, please help. Asus fxgm-bn In the BIOS in Boot there is no SSD disk, in general it does not see it in the BIOS, which is why I cannot install Windows from a flash drive. Help install Windows 10 on an SSD drive.

Herman, hello. In your laptop, the SSD is built into the motherboard, because it is in m2 format and is connected via a PCI-E slot. In this case, it is entirely possible that the drive is not displayed in the BIOS before the operating system is installed on it. In your case, you need to solve the problem with the display of the SSD when installing the OS. You do not need to install any additional drivers, since you are installing Windows, just make sure that the following parameters are activated in UEFI:

First go to the “Advanced” menu, find the “PCH Storage Configuration” item, and then open it. Set “M.2 SATA mode” to “Enabled”. Such manipulation will help in the event that the SSD and HDD use the same physical channel. 2. Now you need to go to the “Boot” section and select the “CSM (Compatibility Support Module)” item. Find “Boot from PCI-E” or “Pci expansion device” and change the value to “UEFI”, if there is Legaсy. Not every SSD similar to yours supports Legasy mode, as it is simply unnecessary.

Ask a question or leave your worldview Cancel comment

How to call the BIOS on an Asus laptop. Enter BIOS on Asus laptops

How to enter advanced BIOS settings?

In most PC / laptop models, to enter the BIOS, you need to press the F2 or Del (sometimes F1 or Esc) button immediately after turning on the device.

How to enable advanced BIOS settings on an Acer laptop?

BIOS 1.37, but it also worked on 1.32, the main thing is not to jump around the windows, but only to go into the BIOS, press FnTab three times, press F10, press Enter, the computer will reboot, immediately press F2 and it will enter the extended BIOS (will be added advanced window with all hidden parameters).

How to enter BIOS on Windows 10 at boot?

There is also a traditional, well-known method to enter the BIOS (also suitable for UEFI). press the Delete key (for most PCs) or F2 (for most laptops) immediately when the computer is turned on, even before the OS starts to boot. As a rule, on the boot screen below, the following is displayed: Press Key_Name to enter setup.

How to set up BIOS on Asus laptop to install Windows?

How to enter and configure the BIOS of an Asus X550 laptop to install Windows 7, 8 from a USB flash drive or disk.

  • The first step is to turn on the laptop.
  • Thus, we got into the BIOS.
  • We go to “USB Configuration” by pressing the enter key on the keyboard.
  • Now with “Advanced” go to the “Security” tab.
  • Change “Security Boot Control” to “Disabled”.

How to enter BIOS on Asus laptop Windows 10?

Press the power button, and immediately press Esc. A menu will open in which you can select the desired device to download. In most cases, regardless of the Windows installed (if the operating system is already installed), the BIOS settings on an Asus laptop can be opened with the F2 key.

How to enable Launch CSM on Asus?

In Asus laptops, to install Windows 7 instead of the preinstalled Windows 8, you first need to go into the BIOS, disable “Secure boot” in the “Security” section, then enable “Launch CSM” in the “Boot” section. transfer from “Disabled” to “Enabled” (Launch CSM in this case stands for Launch Compatibility Support

How to enable advanced BIOS settings on Asus laptop?

3 ways to enter BIOS / UEFI on Asus laptops

  • Turn off your laptop first;
  • Then hold down the F2 button;
  • Without releasing the F2 button, turn on the device;
  • Do not release the F2 button until the main BIOS / UEFI page appears.

How to enter BIOS on Asus laptop Windows 7?

Press and hold the F2 key. then press the power button. DO NOT RELEASE F2 key until the BIOS screen appears. May 18, 2020.

How to enter BIOS on Windows 10?

If your BIOS has an interface with a menu bar at the top, then to exit this program, go to the Exit item in the main menu. And already at this point use the commands “Exit Without Sawing” and “Save Exit Setup”.

How to enter BIOS on Windows 10 at boot?

By default, you can get into the BIOS by pressing a certain button on the keyboard (F2, Del, Assist and others) when the PC boots up, however, fast boot is enabled by default in Windows 10, and even knowing which button to press, you can not enter the BIOS the first time get in.

How to choose boot from a USB flash drive on a laptop?

We press the F12 key when loading and get into the boot menu of the laptop, there we just select our USB flash drive and load the laptop from the USB flash drive. If F12 does not work at boot, then press F2, less often F6 and get into the laptop’s BIOS UEFI, here we go to the Boot tab.

READ  How to change the backlight on an Asus laptop

How to call the boot menu on a computer?

Entering the boot menu is quite simple. all you need to do is press a certain key during boot, just like you do to enter BIOS Setup. Typically, different manufacturers assign different keys for this. This can be the key and F8, and F11, and F12, and Esc.

How to enter the boot menu on HP?

To enter the Boot Menu on an HP laptop, you need to: When you turn on Windows, immediately press the Esc key. The launch menu will be displayed. press the F9 button.

How to install Windows using the Boot Menu?

Booting from an installation disk or flash drive

  • Immediately after turning on the computer, hold down the “Boot Menu” call key until the boot device selection menu appears.
  • Use the “down” and “up” arrows to navigate to the DVD drive or USB flash drive and press “Enter”.

We go into the BIOS on an Asus laptop using the keys

In the standard configuration of Asus laptops, the BIOS is started using the F2 key. If your laptop has undergone modifications affecting

BIOS, check the following table first.

The procedure itself is as follows. You turn off your laptop first if it’s on. Then press and hold the F2 button on your Asus keyboard.

Release the F2 button. After that you will see the BIOS start menu.

If the laptop does not respond when you try to start, press and hold the power button until the monitor displays the above information. Usually 5-8 seconds is enough.

Enter BIOS on Asus

Let’s consider the most popular keys and their combinations for entering BIOS on Asus laptops of different series:

  • X-series. If your laptop’s name begins with “X” and other numbers and letters follow, then your device is an X-series. To enter them, either the F2 key or the CtrlF2 combination is used. However, on very old models of this series, F12 may be used instead of these keys;
  • K-series. F8 is usually used here;
  • Other series designated by letters of the English alphabet. Asus also has less common series, like the previous two. The names start from A to Z (exceptions: the letters K and X). Most of them use the F2 key or the CtrlF2 / FnF2 combination. On older models, Delete is responsible for entering the BIOS;
  • UL / UX-series also enter BIOS by pressing F2 or through its combination with Ctrl / Fn;
  • FX series. This series presents modern and productive devices, therefore, to enter the BIOS on such models, it is recommended to use Delete or the CtrlDelete combination. However, on older devices, it might be F2.

Although laptops are from the same manufacturer, the BIOS entry process may differ between them depending on the model, series, and (possibly) individual characteristics of the device. The most popular keys for entering BIOS on almost all devices are: F2, F8, Delete, and the rarest ones are F4, F5, F10, F11, F12, Esc. Sometimes you can find combinations of them using Shift, Ctrl or Fn. The most common keyboard shortcut for Asus laptops is CtrlF2. To enter, only one key or a combination of them is suitable, the rest of the system will be ignored.

You can find out which key / combination you need to press by examining the technical documentation for your laptop. This is done both with the help of the documents that come with the purchase, and by viewing on the official website. Enter the device model and on its personal page go to the “Support” section.

In the “Manuals and Documentation” tab, you can find the necessary help files.

How ! ASUS Laptop BOOT Menu Bios Settings ! Secure BOOT ! Boot from DVD Room ,

Also, on the PC boot screen, the following inscription sometimes appears: “Please use (the required key) to enter setup” (it may look different, but carry the same meaning). To enter BIOS, you will need to press the key that is given in the message.

How to call the BIOS on an Asus laptop

Users rarely need to work with the BIOS, as it is usually required to reinstall the OS or use the advanced PC settings. On Asus laptops, the input may vary, depending on the device model.

Features of entering BIOS on Asus laptops running Windows 8 / 8.1 / 10

If your Asus laptop is running Windows 8 / 8.1 / 10 and the above method of entering BIOS does not work, follow the instructions below.

Important note! Images show English text. For a better understanding of the process, accompanying Комментарии и мнения владельцев are given in Russian. The arrangement of keys and menu items remains the same.

Click on the button “Change computer settings” (Update and security in version 10 OC).

Once in the General section. go from there to the category “Special boot options” (For version 10 in the “Recovery” section), then click the “Restart now” button.

In the menu that appears, click on “Advanced Options” and “UFFI Firmware Options”

After the laptop is fully rebooted, the BIOS will turn on.

Now you know how to enter the BIOS on an Asus laptop, if you did not succeed, then read the instructions carefully and describe the problem in the Комментарии и мнения владельцев to the article!

Esc. the overwhelming majority of Toshiba (after Esc, the screen prompts you to press F1 to enter); F1. almost all IBM / Lenovo, as well as some HP, Dell, Packard-Bell, Gateway; F2. Acer, Asus, RoverBook F3. rarely for Dell. Sony.F8. iRu, some DellF10 models. Toshiba, Compaq (you need to press when the blinking cursor appears in the upper right corner of the screen); F12. Lenovo, etc. CtrlF2. AsusCtrlAltEsc. some Acer, etc.; CtrlAltS. relatively common from not very well-known manufacturers;

You can also try CtrlAltDel, CtrlAltIns, CtrlAltEnter, FnF1, CtrlIns, but these are already exotic options.

BYRGPUB.COM 2021